ASoC: rt1011: Add RT1011 amplifier driver
Subsystems (4)
PATCH 1/1 ASoC: rt1011: Add RT1011 amplifier driver
From: Shuming Fan <[email protected]>
This is the initial amplifier driver for rt1011.
--- .../devicetree/bindings/sound/rt1011.txt | 32 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1011.c | 2241 +++++++++++++++++ sound/soc/codecs/rt1011.h | 672 +++++ 5 files changed, 2953 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt1011.txt create mode 100644 sound/soc/codecs/rt1011.c create mode 100644 sound/soc/codecs/rt1011.h
Documentation/devicetree/bindings/sound/rt1011.txt new file +32 -0
@@ -0,0 +1,32 @@ +RT1011 Mono Class D Audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1011". + +- reg : The I2C address of the device. This I2C address decide by + two input pins (ASEL1 and ASEL2). + ------------------------------------- + | ASEL2 | ASEL1 | Address | + ------------------------------------- + | 0 | 0 | 0x38 | + ------------------------------------- + | 0 | 1 | 0x39 | + ------------------------------------- + | 1 | 0 | 0x3a | + ------------------------------------- + | 1 | 1 | 0x3b | + ------------------------------------- + +Pins on the device (for linking into audio routes) for RT1011: + + * SPO + +Example: + +rt1011: codec@38 { + compatible = "realtek,rt1011"; + reg = <0x38>; +};
sound/soc/codecs/Kconfig +6 -0
@@ -139,6 +139,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT274 if I2C select SND_SOC_RT286 if I2C select SND_SOC_RT298 if I2C + select SND_SOC_RT1011 if I2C select SND_SOC_RT1305 if I2C select SND_SOC_RT5514 if I2C select SND_SOC_RT5616 if I2C
@@ -869,6 +870,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y default y if SND_SOC_RT5682=y + default y if SND_SOC_RT1011=y default y if SND_SOC_RT1305=y default m if SND_SOC_RT5514=m default m if SND_SOC_RT5616=m
@@ -883,6 +885,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m default m if SND_SOC_RT5682=m + default m if SND_SOC_RT1011=m default m if SND_SOC_RT1305=m config SND_SOC_RL6347A
@@ -906,6 +909,9 @@ config SND_SOC_RT298 tristate depends on I2C +config SND_SOC_RT1011 + tristate + config SND_SOC_RT1305 tristate
sound/soc/codecs/Makefile +2 -0
@@ -141,6 +141,7 @@ snd-soc-pcm512x-spi-objs := pcm512x-spi.o snd-soc-rk3328-objs := rk3328_codec.o snd-soc-rl6231-objs := rl6231.o snd-soc-rl6347a-objs := rl6347a.o +snd-soc-rt1011-objs := rt1011.o snd-soc-rt1305-objs := rt1305.o snd-soc-rt274-objs := rt274.o snd-soc-rt286-objs := rt286.o
@@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o +obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
sound/soc/codecs/rt1011.c new file +2241 -0
2,241 lines not on this page · raw message
sound/soc/codecs/rt1011.h new file +672 -0
672 lines not on this page · raw message
Signature · 1 line
2.21.0
Mark Brown
maintainerApplied "ASoC: rt1011: Add RT1011 amplifier driver" to the asoc tree
The patch
ASoC: rt1011: Add RT1011 amplifier driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
d6e65bb7ff0d360c4c5462c3d0b237f2a07e5312Mon Sep 17 00:00:00 2001
From: Shuming Fan <[email protected]>
Date: Tue, 28 May 2019 12:30:17 +0800
Subject: [PATCH] ASoC: rt1011: Add RT1011 amplifier driver
This is the initial amplifier driver for rt1011.
--- .../devicetree/bindings/sound/rt1011.txt | 32 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1011.c | 2241 +++++++++++++++++ sound/soc/codecs/rt1011.h | 672 +++++ 5 files changed, 2953 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt1011.txt create mode 100644 sound/soc/codecs/rt1011.c create mode 100644 sound/soc/codecs/rt1011.h
Documentation/devicetree/bindings/sound/rt1011.txt new file +32 -0
@@ -0,0 +1,32 @@ +RT1011 Mono Class D Audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1011". + +- reg : The I2C address of the device. This I2C address decide by + two input pins (ASEL1 and ASEL2). + ------------------------------------- + | ASEL2 | ASEL1 | Address | + ------------------------------------- + | 0 | 0 | 0x38 | + ------------------------------------- + | 0 | 1 | 0x39 | + ------------------------------------- + | 1 | 0 | 0x3a | + ------------------------------------- + | 1 | 1 | 0x3b | + ------------------------------------- + +Pins on the device (for linking into audio routes) for RT1011: + + * SPO + +Example: + +rt1011: codec@38 { + compatible = "realtek,rt1011"; + reg = <0x38>; +};
sound/soc/codecs/Kconfig +6 -0
@@ -140,6 +140,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT274 if I2C select SND_SOC_RT286 if I2C select SND_SOC_RT298 if I2C + select SND_SOC_RT1011 if I2C select SND_SOC_RT1305 if I2C select SND_SOC_RT5514 if I2C select SND_SOC_RT5616 if I2C
@@ -877,6 +878,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y default y if SND_SOC_RT5682=y + default y if SND_SOC_RT1011=y default y if SND_SOC_RT1305=y default m if SND_SOC_RT5514=m default m if SND_SOC_RT5616=m
@@ -891,6 +893,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m default m if SND_SOC_RT5682=m + default m if SND_SOC_RT1011=m default m if SND_SOC_RT1305=m config SND_SOC_RL6347A
@@ -914,6 +917,9 @@ config SND_SOC_RT298 tristate depends on I2C +config SND_SOC_RT1011 + tristate + config SND_SOC_RT1305 tristate
sound/soc/codecs/Makefile +2 -0
@@ -142,6 +142,7 @@ snd-soc-pcm512x-spi-objs := pcm512x-spi.o snd-soc-rk3328-objs := rk3328_codec.o snd-soc-rl6231-objs := rl6231.o snd-soc-rl6347a-objs := rl6347a.o +snd-soc-rt1011-objs := rt1011.o snd-soc-rt1305-objs := rt1305.o snd-soc-rt274-objs := rt274.o snd-soc-rt286-objs := rt286.o
@@ -417,6 +418,7 @@ obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o +obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
sound/soc/codecs/rt1011.c new file +2241 -0
2,241 lines not on this page · raw message
sound/soc/codecs/rt1011.h new file +672 -0
672 lines not on this page · raw message
Signature · 1 line
2.20.1