ARM: meson-g12a: Add missing support from Linux 5.2-rc1
Subsystems (6)
cover ARM: meson-g12a: Add missing support from Linux 5.2-rc1
This patchset :
- Syncs the G12A DT from v5.2-rc1
- Add support for the G12A PCIE PLL, introduced in v5.2-rc1
- Add missing DT to fill the gaps, that will be synced in Linux 5.3-rc1
Neil Armstrong (3):
ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1
clk: meson-g12a: Add PCIE PLL support
ARM: dts: Add missing DT for Meson G12A support
arch/arm/dts/meson-g12a-u-boot.dtsi | 216 ++++++++ arch/arm/dts/meson-g12a-u200-u-boot.dtsi | 63 +++ arch/arm/dts/meson-g12a-u200.dts | 147 ++++++ arch/arm/dts/meson-g12a.dtsi | 465 ++++++++++++++++++ drivers/clk/meson/g12a.c | 103 ++++ include/dt-bindings/clock/g12a-aoclkc.h | 2 + include/dt-bindings/clock/g12a-clkc.h | 5 + .../reset/amlogic,meson-g12a-reset.h | 5 +- 8 files changed, 1005 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-g12a-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-u200-u-boot.dtsi
Signature · 1 line
2.21.0
PATCH 1/3 ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1
Sync from Linux commit a188339ca5a3 ("Linux 5.2-rc1")
--- arch/arm/dts/meson-g12a-u200.dts | 147 ++++++ arch/arm/dts/meson-g12a.dtsi | 465 ++++++++++++++++++ include/dt-bindings/clock/g12a-aoclkc.h | 2 + include/dt-bindings/clock/g12a-clkc.h | 5 + .../reset/amlogic,meson-g12a-reset.h | 5 +- 5 files changed, 623 insertions(+), 1 deletion(-)
arch/arm/dts/meson-g12a-u200.dts +147 -0
@@ -6,6 +6,8 @@ /dts-v1/; #include "meson-g12a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> / { compatible = "amlogic,u200", "amlogic,g12a";
@@ -21,9 +23,154 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc_5v>; +};
arch/arm/dts/meson-g12a.dtsi +465 -0
526 lines not on this page · raw message
include/dt-bindings/clock/g12a-aoclkc.h +2 -0
@@ -26,7 +26,9 @@#define CLKID_AO_M4_FCLK 13#define CLKID_AO_M4_HCLK 14#define CLKID_AO_CLK81 15 +#define CLKID_AO_SAR_ADC_SEL 16#define CLKID_AO_SAR_ADC_CLK 18 +#define CLKID_AO_CTS_OSCIN 19#define CLKID_AO_32K 23#define CLKID_AO_CEC 27#define CLKID_AO_CTS_RTC_OSCIN 28
include/dt-bindings/clock/g12a-clkc.h +5 -0
@@ -131,5 +131,10 @@#define CLKID_MALI_1 174#define CLKID_MALI 175#define CLKID_MPLL_5OM 177 +#define CLKID_CPU_CLK 187 +#define CLKID_PCIE_PLL 201 +#define CLKID_VDEC_1 204 +#define CLKID_VDEC_HEVC 207 +#define CLKID_VDEC_HEVCF 210#endif /* __G12A_CLKC_H */
include/dt-bindings/reset/amlogic,meson-g12a-reset.h +4 -1
@@ -51,7 +51,10 @@#define RESET_SD_EMMC_A 44#define RESET_SD_EMMC_B 45#define RESET_SD_EMMC_C 46 -/* 47-60 */ +/* 47 */ +#define RESET_USB_PHY20 48 +#define RESET_USB_PHY21 49 +/* 50-60 */ #define RESET_AUDIO_CODEC 61/* 62-63 */ /* RESET2 */
Signature · 1 line
2.21.0
PATCH 2/3 clk: meson-g12a: Add PCIE PLL support
In reply to Neil ArmstrongThe G12A PCIE PLL clock was introduced in Linux 5.2-rc1, and is needed for USB to operate, add basic support for it and associated gates.
--- drivers/clk/meson/g12a.c | 103 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+)
drivers/clk/meson/g12a.c +103 -0
@@ -22,6 +22,8 @@ struct meson_clk {struct regmap *map; }; +static ulong meson_clk_set_rate_by_id (struct clk *clk,unsigned long id, +ulong rate,ulong current_rate);static ulong meson_clk_get_rate_by_id (struct clk *clk,unsigned long id);#define NUM_CLKS 178
@@ -36,6 +38,8 @@ static struct meson_gate gates[NUM_CLKS] = {MESON_GATE (CLKID_SD_EMMC_C ,HHI_GCLK_MPEG0 ,26 ),MESON_GATE (CLKID_ETH ,HHI_GCLK_MPEG1 ,3 ),MESON_GATE (CLKID_UART1 ,HHI_GCLK_MPEG1 ,16 ), +MESON_GATE (CLKID_USB ,HHI_GCLK_MPEG1 ,25 ), +MESON_GATE (CLKID_USB1_DDR_BRIDGE ,HHI_GCLK_MPEG2 ,8 ),/* Peripheral Gates */ MESON_GATE(CLKID_SD_EMMC_B_CLK0, HHI_SD_EMMC_CLK_CNTL, 23),
@@ -231,6 +235,36 @@ static ulong meson_pll_get_rate(struct clk *clk, unsigned long id)return ((parent_rate_mhz * m / n) >> od) *1000000 ; } +static struct parm meson_pcie_pll_parm[3 ] = { + {HHI_PCIE_PLL_CNTL0 ,0 ,8 },/* pm */ + {HHI_PCIE_PLL_CNTL0 ,10 ,5 },/* pn */ + {HHI_PCIE_PLL_CNTL0 ,16 ,5 },/* pod */ +}; + +static ulong meson_pcie_pll_get_rate (struct clk *clk) +{ +struct meson_clk *priv =dev_get_priv (clk->dev); +struct parm *pm, *pn, *pod; +unsigned long parent_rate_mhz =XTAL_RATE /1000000 ; +u16 n, m, od; +uint reg; + + pm = &meson_pcie_pll_parm[0 ]; + pn = &meson_pcie_pll_parm[1 ]; + pod = &meson_pcie_pll_parm[2 ]; + +regmap_read (priv->map, pn->reg_off, ®); + n =PARM_GET (pn->width, pn->shift, reg); + +regmap_read (priv->map, pm->reg_off, ®); + m =PARM_GET (pm->width, pm->shift, reg); + +regmap_read (priv->map, pod->reg_off, ®); + od =PARM_GET (pod->width, pod->shift, reg); + +return ((parent_rate_mhz * m / n) /2 / od /2 ) *1000000 ; +} +static ulong meson_clk_get_rate_by_id (struct clk *clk,unsigned long id) {ulong rate;
@@ -263,6 +297,9 @@ static ulong meson_clk_get_rate_by_id(struct clk *clk, unsigned long id)case CLKID_CLK81 : rate =meson_clk81_get_rate (clk);break ; +case CLKID_PCIE_PLL : + rate =meson_pcie_pll_get_rate (clk); +break ;default :if (gates[id].reg !=0 ) {/* a clock gate */
@@ -281,6 +318,71 @@ static ulong meson_clk_get_rate(struct clk *clk)return meson_clk_get_rate_by_id (clk, clk->id); } +static ulong meson_pcie_pll_set_rate (struct clk *clk,ulong rate) +{ +struct meson_clk *priv =dev_get_priv (clk->dev); + +regmap_write (priv->map,HHI_PCIE_PLL_CNTL0 ,0x20090496 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL0 ,0x30090496 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL1 ,0x00000000 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL2 ,0x00001100 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL3 ,0x10058e00 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL4 ,0x000100c0 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL5 ,0x68000048 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL5 ,0x68000068 ); +udelay (20 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL4 ,0x008100c0 ); +udelay (10 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL0 ,0x34090496 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL0 ,0x14090496 ); +udelay (10 ); +regmap_write (priv->map,HHI_PCIE_PLL_CNTL2 ,0x00001000 ); +regmap_update_bits (priv->map,HHI_PCIE_PLL_CNTL0 , +0x1f <<16 ,9 <<16 ); + +return 100000000 ; +} + +static ulong meson_clk_set_rate_by_id (struct clk *clk,unsigned long id, +ulong rate,ulong current_rate) +{ +if (current_rate == rate) +return 0 ; + +switch (id) { +/* Fixed clocks */ +case CLKID_PCIE_PLL : +return meson_pcie_pll_set_rate (clk, rate); + +default : +return -ENOENT ; + } + +return -EINVAL ; +} + + +static ulong meson_clk_set_rate (struct clk *clk,ulong rate) +{ +ulong current_rate =meson_clk_get_rate_by_id (clk, clk->id); +int ret; + +if (IS_ERR_VALUE (current_rate)) +return current_rate; + +debug ("%s: setting rate of %ld from %ld to %ld\n" , + __func__, clk->id, current_rate, rate); + + ret =meson_clk_set_rate_by_id (clk, clk->id, rate, current_rate); +if (IS_ERR_VALUE (ret)) +return ret; + +debug ("clock %lu has new rate %lu\n" , clk->id, +meson_clk_get_rate_by_id (clk, clk->id)); + +return 0 ; +} +static int meson_clk_probe (struct udevice *dev) {struct meson_clk *priv =dev_get_priv (dev);
@@ -298,6 +400,7 @@ static struct clk_ops meson_clk_ops = { .disable = meson_clk_disable, .enable = meson_clk_enable, .get_rate = meson_clk_get_rate, + .set_rate = meson_clk_set_rate, };static const struct udevice_id meson_clk_ids[] = {
Signature · 1 line
2.21.0
PATCH 3/3 ARM: dts: Add missing DT for Meson G12A support
In reply to Neil ArmstrongThe following DT nodes in the process on review for Linux 5.3, until Linux 5.3 is tagged, add the missing DT nodes in u-boot specific DTSI files that will be dropped when the v5.3-rc1 DT is synced again.
--- arch/arm/dts/meson-g12a-u-boot.dtsi | 216 +++++++++++++++++++++++ arch/arm/dts/meson-g12a-u200-u-boot.dtsi | 63 +++++++ 2 files changed, 279 insertions(+) create mode 100644 arch/arm/dts/meson-g12a-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-u200-u-boot.dtsi
arch/arm/dts/meson-g12a-u-boot.dtsi new file +216 -0
@@ -0,0 +1,216 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Maxime Jourdan <[email protected]> + */ + +/ { + soc { + ethmac: ethernet at ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.710", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + + sd_emmc_a: sd at ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + }; + + sd_emmc_b: sd at ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc at ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; +}; + +&periphs_pinctrl { + emmc_pins: emmc { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c", + "sdcard_clk_c"; + function = "sdcard"; + bias-pull-up; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; + + sdcard_z_pins: sdcard_z { + mux { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z", + "sdcard_clk_z"; + function = "sdcard"; + bias-pull-up; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; +}; + +&periphs { + eth_phy: mdio-multiplexer at 4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_5OM>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio at 0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio at 1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy at 8 { + compatible = "ethernet-phy-id0180.3300", + "ethernet-phy-ieee802.3-c22"; + reg = <8>; + max-speed = <100>; + + /* FIXME: Add irq support */ + }; + }; + }; +}; + +
arch/arm/dts/meson-g12a-u200-u-boot.dtsi new file +63 -0
63 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 3/3 ARM: dts: Add missing DT for Meson G12A support
Quoted 18 lines · Neil Armstrong
The following DT nodes in the process on review for Linux 5.3, until Linux 5.3 is tagged, add the missing DT nodes in u-boot specific DTSI files that will be dropped when the v5.3-rc1 DT is synced again.
Signed-off-by Neil Armstrong <[email protected]>--- arch/arm/dts/meson-g12a-u-boot.dtsi | 216 +++++++++++++++++++++++ arch/arm/dts/meson-g12a-u200-u-boot.dtsi | 63 +++++++ 2 files changed, 279 insertions(+) create mode 100644 arch/arm/dts/meson-g12a-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-u200-u-boot.dtsiarch/arm/dts/meson-g12a-u-boot.dtsi new file +0
-0
arch/arm/dts/meson-g12a-u-boot.dtsi line 4
Quoted 4 lines
arch/arm/dts/meson-g12a-u-boot.dtsi new file +4
-0@@ -0,0 +1,216 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Maxime Jourdan <[email protected]>
Oops wrong author, will fix while applying
Quoted 282 lines
arch/arm/dts/meson-g12a-u-boot.dtsi new file +212
-0+ */ + +/ { + soc { + ethmac: ethernet at ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.710", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + + sd_emmc_a: sd at ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + }; + + sd_emmc_b: sd at ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc at ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; +}; + +&periphs_pinctrl { + emmc_pins: emmc { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c", + "sdcard_clk_c"; + function = "sdcard"; + bias-pull-up; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; + + sdcard_z_pins: sdcard_z { + mux { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z", + "sdcard_clk_z"; + function = "sdcard"; + bias-pull-up; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; +}; + +&periphs { + eth_phy: mdio-multiplexer at 4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_5OM>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio at 0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio at 1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy at 8 { + compatible = "ethernet-phy-id0180.3300", + "ethernet-phy-ieee802.3-c22"; + reg = <8>; + max-speed = <100>; + + /* FIXME: Add irq support */ + }; + }; + }; +}; + +arch/arm/dts/meson-g12a-u200-u-boot.dtsi new file +63
-0@@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Neil Armstrong <[email protected]> + */ + +#include "meson-g12a-u-boot.dtsi" + + / { + aliases { + ethernet0 = ðmac; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_leds_pins>; + pinctrl-names = "default"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +};
cover ARM: meson-g12a: Add missing support from Linux 5.2-rc1
In reply to Neil ArmstrongQuoted 10 lines · Neil Armstrong
This patchset :
- Syncs the G12A DT from v5.2-rc1
- Add support for the G12A PCIE PLL, introduced in v5.2-rc1
- Add missing DT to fill the gaps, that will be synced in Linux 5.3-rc1Neil Armstrong (3):
ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1
clk: meson-g12a: Add PCIE PLL support
ARM: dts: Add missing DT for Meson G12A support
Quoted 12 lines
arch/arm/dts/meson-g12a-u-boot.dtsi | 216 ++++++++ arch/arm/dts/meson-g12a-u200-u-boot.dtsi | 63 +++ arch/arm/dts/meson-g12a-u200.dts | 147 ++++++ arch/arm/dts/meson-g12a.dtsi | 465 ++++++++++++++++++ drivers/clk/meson/g12a.c | 103 ++++ include/dt-bindings/clock/g12a-aoclkc.h | 2 + include/dt-bindings/clock/g12a-clkc.h | 5 + .../reset/amlogic,meson-g12a-reset.h | 5 +- 8 files changed, 1005 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-g12a-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-u200-u-boot.dtsi
Applied to u-boot-amlogic