Skip to contentSkip to conversation

net: wireless: p54: fix crash during initialization

PATCH In review Christian Lamparter 2 participants 2 messages May 18, 2019 – May 28, 2019 P54 wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: wireless: p54: fix crash during initialization

This patch fixes a crash that got introduced when the mentioned patch replaced the direct list_head access with skb_peek_tail(). When the device is starting up, there are no entries in the queue, so previously to "Use skb_peek_tail() instead..." the target_skb would end up as the tail and head pointer which then could be used by __skb_queue_after to fill the empty queue.

With skb_peek_tail() in its place will instead just return NULL which then causes a crash in the __skb_queue_after().

| BUG: unable to handle kernel NULL pointer dereference at 000000
| #PF error: [normal kernel read fault]
| PGD 0 P4D 0
| Oops: 0000 [#1] SMP PTI
| CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: GO   5.1.0-rc7-wt+ #218
| Hardware name: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015
| Workqueue: events request_firmware_work_func
| RIP: 0010:p54_tx_pending+0x10f/0x1b0 [p54common]
| Code: 78 06 80 78 28 00 74 6d <48> 8b 07 49 89 7c 24 08 49 89 04 24 4
| RSP: 0018:ffffa81c81927d90 EFLAGS: 00010086
| RAX: ffff9bbaaf131048 RBX: 0000000000020670 RCX: 0000000000020264
| RDX: ffff9bbaa976d660 RSI: 0000000000000202 RDI: 0000000000000000
| RBP: ffff9bbaa976d620 R08: 00000000000006c0 R09: ffff9bbaa976d660
| R10: 0000000000000000 R11: ffffe8480dbc5900 R12: ffff9bbb45e87700
| R13: ffff9bbaa976d648 R14: ffff9bbaa976d674 R15: ffff9bbaaf131048
| FS:  0000000000000000(0000) GS:ffff9bbb5ec00000(0000) knlGS:00000
| CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| CR2: 0000000000000000 CR3: 00000003695fc003 CR4: 00000000001606f0
| Call Trace:
|  p54_download_eeprom+0xbe/0x120 [p54common]
|  p54_read_eeprom+0x7f/0xc0 [p54common]
|  p54u_load_firmware_cb+0xe0/0x160 [p54usb]
|  request_firmware_work_func+0x42/0x80
|  process_one_work+0x1f5/0x3f0
|  worker_thread+0x28/0x3c0
Fixes e3554197fc8f ("p54: Use skb_peek_tail() instead of direct head pointer accesses.")
---
 drivers/net/wireless/intersil/p54/txrx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/intersil/p54/txrx.c +4 -1
index 790784568ad2..5bf1c19ecced 100644
@@ -142,7 +142,10 @@ static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb)
 	    unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON))
 		priv->beacon_req_id = data->req_id;
 
-	__skb_queue_after(&priv->tx_queue, target_skb, skb);
+	if (target_skb)
+		__skb_queue_after(&priv->tx_queue, target_skb, skb);
+	else
+		__skb_queue_head(&priv->tx_queue, skb);
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	return 0;
 }
Signature · 1 line
2.20.1
#1 lore raw

Re: [PATCH] p54: fix crash during initialization

Quoted 38 lines · Christian Lamparter

This patch fixes a crash that got introduced when the mentioned patch replaced the direct list_head access with skb_peek_tail(). When the device is starting up, there are no entries in the queue, so previously to "Use skb_peek_tail() instead..." the target_skb would end up as the tail and head pointer which then could be used by __skb_queue_after to fill the empty queue.

With skb_peek_tail() in its place will instead just return NULL which then causes a crash in the __skb_queue_after().

| BUG: unable to handle kernel NULL pointer dereference at 000000
| #PF error: [normal kernel read fault]
| PGD 0 P4D 0
| Oops: 0000 [#1] SMP PTI
| CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: GO   5.1.0-rc7-wt+ #218
| Hardware name: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015
| Workqueue: events request_firmware_work_func
| RIP: 0010:p54_tx_pending+0x10f/0x1b0 [p54common]
| Code: 78 06 80 78 28 00 74 6d <48> 8b 07 49 89 7c 24 08 49 89 04 24 4
| RSP: 0018:ffffa81c81927d90 EFLAGS: 00010086
| RAX: ffff9bbaaf131048 RBX: 0000000000020670 RCX: 0000000000020264
| RDX: ffff9bbaa976d660 RSI: 0000000000000202 RDI: 0000000000000000
| RBP: ffff9bbaa976d620 R08: 00000000000006c0 R09: ffff9bbaa976d660
| R10: 0000000000000000 R11: ffffe8480dbc5900 R12: ffff9bbb45e87700
| R13: ffff9bbaa976d648 R14: ffff9bbaa976d674 R15: ffff9bbaaf131048
| FS:  0000000000000000(0000) GS:ffff9bbb5ec00000(0000) knlGS:00000
| CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| CR2: 0000000000000000 CR3: 00000003695fc003 CR4: 00000000001606f0
| Call Trace:
|  p54_download_eeprom+0xbe/0x120 [p54common]
|  p54_read_eeprom+0x7f/0xc0 [p54common]
|  p54u_load_firmware_cb+0xe0/0x160 [p54usb]
|  request_firmware_work_func+0x42/0x80
|  process_one_work+0x1f5/0x3f0
|  worker_thread+0x28/0x3c0
Quoted 3 lines
Fixes e3554197fc8f ("p54: Use skb_peek_tail() instead of direct head pointer accesses.")

Patch applied to wireless-drivers-next.git, thanks.

1645ab931998 p54: fix crash during initialization

Signature · 3 lines
https://patchwork.kernel.org/patch/10949055/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches