device property: Add new array helper
Subsystems (8)
Charles Keepax
maintainerPATCH 1/6 device property: Add new array helper
It is fairly common to want to read an integer array property that is composed of an unknown number of fixed size integer groups. For example, say each group consists of three values which correspond to the settings for one input on the device and the driver supports several chips with different numbers of inputs.
Add a new helper function to provide this functionality, it differs for the existing helpers in that it allows reading a smaller number of values than the full array size and checks that the number of values read is a multiple of the group size.
--- drivers/base/property.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/property.h | 2 ++ 2 files changed, 50 insertions(+)
drivers/base/property.c +48 -0
@@ -133,6 +133,54 @@ int device_property_read_u32_array(struct device *dev, const char *propname,EXPORT_SYMBOL_GPL (device_property_read_u32_array);/** +* device_property_read_u32_2darray - return a 2d u32 array property of a device +* @dev: Device to get the property of +* @propname: Name of the property +* @val: The values are stored here or %NULL to return the number of values +* @nval: Size of the @val array +* @multiple: Number of entries in each block of data +* +* Function reads an array of u32 properties split up into fixed size +* sub-groups, with @propname from the device firmware description and +* stores them to @val if found. +* +* Return: Number of values read +* %0 if the property was not found, +* %-EINVAL if given arguments are not valid, +* %-ENODATA if the property does not have a value, +* %-EPROTO if the property is not an array of numbers, +* %-EOVERFLOW if the size of the property is not as expected. +* %-ENXIO if no suitable firmware interface is present. +*/ +int device_property_read_u32_2darray (struct device *dev,const char *propname, +u32 *val,size_t nval,int multiple) +{ +int n, ret; + + n =device_property_read_u32_array (dev, propname,NULL ,0 ); +if (n == -EINVAL ) { +return 0 ;/* missing, ignore */ + }else if (n <0 ) { +dev_warn (dev,"%s malformed (%d)\n" , propname, n); +return n; + }else if ((n % multiple) !=0 ) { +dev_warn (dev,"%s not a multiple of %d entries\n" , + propname, multiple); +return -EOVERFLOW ; + } + +if (n > nval) + n = nval; + + ret =device_property_read_u32_array (dev, propname, val, n); +if (ret <0 ) +return ret; +else +return n; +} +EXPORT_SYMBOL_GPL (device_property_read_u32_2darray); + +/** * device_property_read_u64_array - return a u64 array property of a device * @dev: Device to get the property of * @propname: Name of the property
include/linux/property.h +2 -0
@@ -43,6 +43,8 @@ int device_property_read_u16_array(struct device *dev, const char *propname, u16 *val, size_t nval);int device_property_read_u32_array (struct device *dev,const char *propname,u32 *val,size_t nval); +int device_property_read_u32_2darray (struct device *dev,const char *propname, +u32 *val,size_t nval,int multiple);int device_property_read_u64_array (struct device *dev,const char *propname,u64 *val,size_t nval); int device_property_read_string_array(struct device *dev, const char *propname,
Signature · 1 line
2.11.0
Charles Keepax
maintainerPATCH v2 2/6 ASoC: madera: Add DT bindings for Cirrus Logic Madera codecs
From: Richard Fitzgerald <[email protected]>
The Cirrus Logic Madera codecs are a family of related codecs with extensive digital and analogue I/O, digital mixing and routing, signal processing and programmable DSPs.
---
No change since v1.
Thanks,
Charles
Documentation/devicetree/bindings/sound/madera.txt | 67 ++++++++++++++++++++++ MAINTAINERS | 1 + include/dt-bindings/sound/madera.h | 29 ++++++++++ 3 files changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/madera.txt create mode 100644 include/dt-bindings/sound/madera.h
Documentation/devicetree/bindings/sound/madera.txt new file +67 -0
@@ -0,0 +1,67 @@ +Cirrus Logic Madera class audio codecs + +This describes audio configuration bindings for these codecs. + +See also the core bindings for the parent MFD driver: +See Documentation/devicetree/bindings/mfd/madera.txt + +and defines for values used in these bindings: +include/dt-bindings/sound/madera.h + +These properties are all contained in the parent MFD node. + +Optional properties: + - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally + connected to DMICs on each input, one cell per input. + <IN1 IN2 IN3 ...> + A value of 0 indicates MICVDD and is the default, other values depend on the + codec: + For CS47L35 one of the CS47L35_DMIC_REF_xxx values + For all other codecs one of the MADERA_DMIC_REF_xxx values + Also see the datasheet for a description of the INn_DMIC_SUP field. + + - cirrus,inmode : A list of input mode settings for each input. A maximum of + 16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR. + For non-muxed inputs the first two cells for that input set the mode for + the left and right channel and the second two cells must be 0. + For muxed inputs the first two cells for that input set the mode of the + left and right A inputs and the second two cells set the mode of the left + and right B inputs. + Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter + than the number of inputs the unspecified inputs default to + MADERA_INMODE_DIFF. + + - cirrus,out-mono : Mono bit for each output, must contain six cells if + specified. A non-zero value indicates the corresponding output is mono. + + - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks + will be generated for. Useful when clock master for systems where the I2S + bus has multiple data lines. + One cell for each AIF, use a value of zero for AIFs that should be handled + normally. + + - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells + (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a + description of this value. + The second cell is ignored for codecs that do not have OUT6. + + - cirrus,pdm-mute : PDM mute format, must contain 2 cells + (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a + description of this value. + The second cell is ignored for codecs that do not have OUT6. + +Example: + +cs47l35@0 { + compatible = "cirrus,cs47l35"; + + cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>; + cirrus,inmode = < + MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */ + MADERA_INMODE_SE MADERA_INMODE_SE /* IN1B single-ended */ + MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */ + 0 0 /* not used on this codec */ + >; + cirrus,out-mono = <0 0 0 0 0 0>; + cirrus,max-channels-clocked = <2 0 0>; +};
MAINTAINERS +1 -0
@@ -3915,6 +3915,7 @@ W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported F: Documentation/devicetree/bindings/mfd/madera.txt F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt +F: include/dt-bindings/sound/madera* F: include/linux/irqchip/irq-madera* F: include/linux/mfd/madera/* F: drivers/gpio/gpio-madera*
include/dt-bindings/sound/madera.h new file +29 -0
@@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Device Tree defines for Madera codecs +* +* Copyright (C) 2016-2017 Cirrus Logic, Inc. and +* Cirrus Logic International Semiconductor Ltd. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef DT_BINDINGS_SOUND_MADERA_H +#define DT_BINDINGS_SOUND_MADERA_H + +#define MADERA_INMODE_DIFF 0 +#define MADERA_INMODE_SE 1 +#define MADERA_INMODE_DMIC 2 + +#define MADERA_DMIC_REF_MICVDD 0 +#define MADERA_DMIC_REF_MICBIAS1 1 +#define MADERA_DMIC_REF_MICBIAS2 2 +#define MADERA_DMIC_REF_MICBIAS3 3 + +#define CS47L35_DMIC_REF_MICBIAS1B 1 +#define CS47L35_DMIC_REF_MICBIAS2A 2 +#define CS47L35_DMIC_REF_MICBIAS2B 3 + +#endif
Signature · 1 line
2.11.0
Charles Keepax
maintainerPATCH v2 3/6 ASoC: madera: Add common support for Cirrus Logic Madera codecs
In reply to Charles KeepaxFrom: Richard Fitzgerald <[email protected]>
The Cirrus Logic Madera codecs are a family of related codecs with extensive digital and analogue I/O, digital mixing and routing, signal processing and programmable DSPs. This patch adds common support code shared by all Madera codecs.
This patch also adds the pdata to the parent mfd pdata struct. Since there is a circular build dependency it's convenient to patch them both atomically.
---
Changes since v1:
- Improve error message in madera_spin_sysclk
- Handle spurious over temperature events
- Factor out generic OF helper function for array reads
- Rename destory functions to free
- Add spaces in madera_dfc_width_text
Thanks,
Charles
MAINTAINERS | 4 + include/linux/mfd/madera/pdata.h | 4 + include/sound/madera-pdata.h | 63 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/madera.c | 4435 ++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/madera.h | 445 ++++ 7 files changed, 4958 insertions(+) create mode 100644 include/sound/madera-pdata.h create mode 100644 sound/soc/codecs/madera.c create mode 100644 sound/soc/codecs/madera.h
MAINTAINERS +4 -0
@@ -3915,14 +3915,18 @@ W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported F: Documentation/devicetree/bindings/mfd/madera.txt F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt +F: Documentation/devicetree/bindings/sound/madera.txt F: include/dt-bindings/sound/madera* F: include/linux/irqchip/irq-madera* F: include/linux/mfd/madera/* +F: include/sound/madera* F: drivers/gpio/gpio-madera* F: drivers/irqchip/irq-madera* F: drivers/mfd/madera* F: drivers/mfd/cs47l* F: drivers/pinctrl/cirrus/* +F: sound/soc/codecs/cs47l* +F: sound/soc/codecs/madera* CLANG-FORMAT FILE M: Miguel Ojeda <[email protected]>
include/linux/mfd/madera/pdata.h +4 -0
@@ -16,6 +16,7 @@#include <linux/regulator/arizona-ldo1.h> #include <linux/regulator/arizona-micsupp.h> #include <linux/regulator/machine.h> +#include <sound/madera-pdata.h> #define MADERA_MAX_MICBIAS 4#define MADERA_MAX_CHILD_MICBIAS 4
@@ -39,6 +40,7 @@ struct madera_codec_pdata;* @gpsw: General purpose switch mode setting. Depends on the external * hardware connected to the switch. (See the SW1_MODE field * in the datasheet for the available values for your codec) +* @codec: Substruct of pdata for the ASoC codec driver */ struct madera_pdata {struct gpio_desc *reset;
@@ -53,6 +55,8 @@ struct madera_pdata {int n_gpio_configs;u32 gpsw[MADERA_MAX_GPSW ]; + + struct madera_codec_pdata codec; };#endif
include/sound/madera-pdata.h new file +63 -0
63 lines not on this page · raw message
sound/soc/codecs/Kconfig +5 -0
@@ -283,10 +283,12 @@ config SND_SOC_WM_HUBS config SND_SOC_WM_ADSP tristate select SND_SOC_COMPRESS + default y if SND_SOC_MADERA=y default y if SND_SOC_CS47L24=y default y if SND_SOC_WM5102=y default y if SND_SOC_WM5110=y default y if SND_SOC_WM2200=y + default m if SND_SOC_MADERA=m default m if SND_SOC_CS47L24=m default m if SND_SOC_WM5102=m default m if SND_SOC_WM5110=m
@@ -703,6 +705,9 @@ config SND_SOC_LOCHNAGAR_SC This driver support the sound card functionality of the Cirrus Logic Lochnagar audio development board. +config SND_SOC_MADERA + tristate + config SND_SOC_MAX98088 tristate "Maxim MAX98088/9 Low-Power, Stereo Audio Codec" depends on I2C
sound/soc/codecs/Makefile +2 -0
@@ -93,6 +93,7 @@ snd-soc-l3-objs := l3.o snd-soc-lm4857-objs := lm4857.o snd-soc-lm49453-objs := lm49453.o snd-soc-lochnagar-sc-objs := lochnagar-sc.o +snd-soc-madera-objs := madera.o snd-soc-max9759-objs := max9759.o snd-soc-max9768-objs := max9768.o snd-soc-max98088-objs := max98088.o
@@ -368,6 +369,7 @@ obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o obj-$(CONFIG_SND_SOC_LM49453) += snd-soc-lm49453.o obj-$(CONFIG_SND_SOC_LOCHNAGAR_SC) += snd-soc-lochnagar-sc.o +obj-$(CONFIG_SND_SOC_MADERA) += snd-soc-madera.o obj-$(CONFIG_SND_SOC_MAX9759) += snd-soc-max9759.o obj-$(CONFIG_SND_SOC_MAX9768) += snd-soc-max9768.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o
sound/soc/codecs/madera.c new file +4435 -0
2,862 lines not on this page · raw message
sound/soc/codecs/madera.h new file +445 -0
445 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.11.0
Part of the diff is not shown here. View the raw message.
Charles Keepax
maintainerRe: [PATCH v2 3/6] ASoC: madera: Add common support for Cirrus Logic Madera codecs
Quoted 18 lines · Charles Keepax
From: Richard Fitzgerald <[email protected]>
The Cirrus Logic Madera codecs are a family of related codecs with extensive digital and analogue I/O, digital mixing and routing, signal processing and programmable DSPs. This patch adds common support code shared by all Madera codecs.
This patch also adds the pdata to the parent mfd pdata struct. Since there is a circular build dependency it's convenient to patch them both atomically.
Signed-off-by Nariman Poushin <[email protected]>Signed-off-by Nikesh Oswal <[email protected]>Signed-off-by Piotr Stankiewicz <[email protected]>Signed-off-by Ajit Pandey <[email protected]>Signed-off-by Richard Fitzgerald <[email protected]>Signed-off-by Charles Keepax <[email protected]>---
sound/soc/codecs/madera.c line 586
Quoted 3 lines
sound/soc/codecs/madera.c new file +3
-0+static int madera_inmux_put (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{
Looks like there are still some issues with the inmux handling here, afraid I will probably need to do a v3 to fix them up.
Thanks,
Charles
Charles Keepax
maintainerPATCH v2 4/6 ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35
In reply to Charles KeepaxFrom: Richard Fitzgerald <[email protected]>
Adds the codec driver for the CS47L35 SmartCodec. This is a multi-functional codec based on the Cirrus Logic Madera platform.
---
Changes since v1:
- Rename destroy functions to free
Thanks,
Charles
sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cs47l35.c | 1748 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1756 insertions(+) create mode 100644 sound/soc/codecs/cs47l35.c
sound/soc/codecs/Kconfig +6 -0
@@ -70,6 +70,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CS4341 if SND_SOC_I2C_AND_SPI select SND_SOC_CS4349 if I2C select SND_SOC_CS47L24 if MFD_CS47L24 + select SND_SOC_CS47L35 if MFD_CS47L35 select SND_SOC_CS53L30 if I2C select SND_SOC_CX20442 if TTY select SND_SOC_CX2072X if I2C
@@ -578,6 +579,9 @@ config SND_SOC_CS4349 config SND_SOC_CS47L24 tristate +config SND_SOC_CS47L35 + tristate + # Cirrus Logic Quad-Channel ADC config SND_SOC_CS53L30 tristate "Cirrus Logic CS53L30 CODEC"
@@ -707,6 +711,8 @@ config SND_SOC_LOCHNAGAR_SC config SND_SOC_MADERA tristate + default y if SND_SOC_CS47L35=y + default m if SND_SOC_CS47L35=m config SND_SOC_MAX98088 tristate "Maxim MAX98088/9 Low-Power, Stereo Audio Codec"
sound/soc/codecs/Makefile +2 -0
@@ -65,6 +65,7 @@ snd-soc-cs43130-objs := cs43130.o snd-soc-cs4341-objs := cs4341.o snd-soc-cs4349-objs := cs4349.o snd-soc-cs47l24-objs := cs47l24.o +snd-soc-cs47l35-objs := cs47l35.o snd-soc-cs53l30-objs := cs53l30.o snd-soc-cx20442-objs := cx20442.o snd-soc-cx2072x-objs := cx2072x.o
@@ -341,6 +342,7 @@ obj-$(CONFIG_SND_SOC_CS43130) += snd-soc-cs43130.o obj-$(CONFIG_SND_SOC_CS4341) += snd-soc-cs4341.o obj-$(CONFIG_SND_SOC_CS4349) += snd-soc-cs4349.o obj-$(CONFIG_SND_SOC_CS47L24) += snd-soc-cs47l24.o +obj-$(CONFIG_SND_SOC_CS47L35) += snd-soc-cs47l35.o obj-$(CONFIG_SND_SOC_CS53L30) += snd-soc-cs53l30.o obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_CX2072X) += snd-soc-cx2072x.o
sound/soc/codecs/cs47l35.c new file +1748 -0
1,748 lines not on this page · raw message
Signature · 1 line
2.11.0
Charles Keepax
maintainerPATCH v2 5/6 ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85
In reply to Charles KeepaxFrom: Richard Fitzgerald <[email protected]>
Adds the codec driver for the CS47L85 SmartCodec. This is a multi-functional codec based on the Cirrus Logic Madera platform.
---
Changes since v1:
- Rename destroy functions to free
Thanks,
Charles
sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cs47l85.c | 2686 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 2694 insertions(+) create mode 100644 sound/soc/codecs/cs47l85.c
sound/soc/codecs/Kconfig +6 -0
@@ -71,6 +71,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CS4349 if I2C select SND_SOC_CS47L24 if MFD_CS47L24 select SND_SOC_CS47L35 if MFD_CS47L35 + select SND_SOC_CS47L85 if MFD_CS47L85 select SND_SOC_CS53L30 if I2C select SND_SOC_CX20442 if TTY select SND_SOC_CX2072X if I2C
@@ -582,6 +583,9 @@ config SND_SOC_CS47L24 config SND_SOC_CS47L35 tristate +config SND_SOC_CS47L85 + tristate + # Cirrus Logic Quad-Channel ADC config SND_SOC_CS53L30 tristate "Cirrus Logic CS53L30 CODEC"
@@ -712,7 +716,9 @@ config SND_SOC_LOCHNAGAR_SC config SND_SOC_MADERA tristate default y if SND_SOC_CS47L35=y + default y if SND_SOC_CS47L85=y default m if SND_SOC_CS47L35=m + default m if SND_SOC_CS47L85=m config SND_SOC_MAX98088 tristate "Maxim MAX98088/9 Low-Power, Stereo Audio Codec"
sound/soc/codecs/Makefile +2 -0
@@ -66,6 +66,7 @@ snd-soc-cs4341-objs := cs4341.o snd-soc-cs4349-objs := cs4349.o snd-soc-cs47l24-objs := cs47l24.o snd-soc-cs47l35-objs := cs47l35.o +snd-soc-cs47l85-objs := cs47l85.o snd-soc-cs53l30-objs := cs53l30.o snd-soc-cx20442-objs := cx20442.o snd-soc-cx2072x-objs := cx2072x.o
@@ -343,6 +344,7 @@ obj-$(CONFIG_SND_SOC_CS4341) += snd-soc-cs4341.o obj-$(CONFIG_SND_SOC_CS4349) += snd-soc-cs4349.o obj-$(CONFIG_SND_SOC_CS47L24) += snd-soc-cs47l24.o obj-$(CONFIG_SND_SOC_CS47L35) += snd-soc-cs47l35.o +obj-$(CONFIG_SND_SOC_CS47L85) += snd-soc-cs47l85.o obj-$(CONFIG_SND_SOC_CS53L30) += snd-soc-cs53l30.o obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_CX2072X) += snd-soc-cx2072x.o
sound/soc/codecs/cs47l85.c new file +2686 -0
2,686 lines not on this page · raw message
Signature · 1 line
2.11.0
Charles Keepax
maintainerPATCH v2 6/6 ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90
In reply to Charles KeepaxFrom: Richard Fitzgerald <[email protected]>
Adds the codec driver for the CS47L90 SmartCodec. This is a multi-functional codec based on the Cirrus Logic Madera platform.
---
Changes since v1:
- Rename destroy functions to free
Thanks,
Charles
sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cs47l90.c | 2624 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 2632 insertions(+) create mode 100644 sound/soc/codecs/cs47l90.c
sound/soc/codecs/Kconfig +6 -0
@@ -72,6 +72,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CS47L24 if MFD_CS47L24 select SND_SOC_CS47L35 if MFD_CS47L35 select SND_SOC_CS47L85 if MFD_CS47L85 + select SND_SOC_CS47L90 if MFD_CS47L90 select SND_SOC_CS53L30 if I2C select SND_SOC_CX20442 if TTY select SND_SOC_CX2072X if I2C
@@ -586,6 +587,9 @@ config SND_SOC_CS47L35 config SND_SOC_CS47L85 tristate +config SND_SOC_CS47L90 + tristate + # Cirrus Logic Quad-Channel ADC config SND_SOC_CS53L30 tristate "Cirrus Logic CS53L30 CODEC"
@@ -717,8 +721,10 @@ config SND_SOC_MADERA tristate default y if SND_SOC_CS47L35=y default y if SND_SOC_CS47L85=y + default y if SND_SOC_CS47L90=y default m if SND_SOC_CS47L35=m default m if SND_SOC_CS47L85=m + default m if SND_SOC_CS47L90=m config SND_SOC_MAX98088 tristate "Maxim MAX98088/9 Low-Power, Stereo Audio Codec"
sound/soc/codecs/Makefile +2 -0
@@ -67,6 +67,7 @@ snd-soc-cs4349-objs := cs4349.o snd-soc-cs47l24-objs := cs47l24.o snd-soc-cs47l35-objs := cs47l35.o snd-soc-cs47l85-objs := cs47l85.o +snd-soc-cs47l90-objs := cs47l90.o snd-soc-cs53l30-objs := cs53l30.o snd-soc-cx20442-objs := cx20442.o snd-soc-cx2072x-objs := cx2072x.o
@@ -345,6 +346,7 @@ obj-$(CONFIG_SND_SOC_CS4349) += snd-soc-cs4349.o obj-$(CONFIG_SND_SOC_CS47L24) += snd-soc-cs47l24.o obj-$(CONFIG_SND_SOC_CS47L35) += snd-soc-cs47l35.o obj-$(CONFIG_SND_SOC_CS47L85) += snd-soc-cs47l85.o +obj-$(CONFIG_SND_SOC_CS47L90) += snd-soc-cs47l90.o obj-$(CONFIG_SND_SOC_CS53L30) += snd-soc-cs53l30.o obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_CX2072X) += snd-soc-cx2072x.o
sound/soc/codecs/cs47l90.c new file +2624 -0
2,624 lines not on this page · raw message
Signature · 1 line
2.11.0
Rafael J. Wysocki
maintainerQuoted 8 lines · Charles Keepax
It is fairly common to want to read an integer array property that is composed of an unknown number of fixed size integer groups. For example, say each group consists of three values which correspond to the settings for one input on the device and the driver supports several chips with different numbers of inputs.
Quoted 4 lines
Add a new helper function to provide this functionality, it differs for the existing helpers in that it allows reading a smaller number of values than the full array size and checks that the number of values read is a multiple of the group size.
As a rule, you need also CC all of the device property framework changes to [email protected], so please resend the series with that taken into account.
Thanks!
Charles Keepax
maintainerQuoted 10 lines · Rafael J. Wysocki
Quoted 8 lines · Charles Keepax
It is fairly common to want to read an integer array property that is composed of an unknown number of fixed size integer groups. For example, say each group consists of three values which correspond to the settings for one input on the device and the driver supports several chips with different numbers of inputs.
Quoted 9 lines
Quoted 4 lines
Add a new helper function to provide this functionality, it differs for the existing helpers in that it allows reading a smaller number of values than the full array size and checks that the number of values read is a multiple of the group size.
As a rule, you need also CC all of the device property framework changes to [email protected], so please resend the series with that taken into account.
Sorry will resend with them included.
Thanks,
Charles