rtlwifi: rtl8192cu: fix error handle when usb probe failed
[email protected]
maintainerPATCH 1/1 rtlwifi: rtl8192cu: fix error handle when usb probe failed
From: Ping-Ke Shih <[email protected]>
rtl_usb_probe() must do error handle rtl_deinit_core() only if rtl_init_core() is done, otherwise goto error_out2.
| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl8192cu: Chip version 0x10 | rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl_usb: Too few input end points found | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS | Google 01/01/2011 | Workqueue: usb_hub_wq hub_event | Call Trace: | __dump_stack lib/dump_stack.c:77 [inline] | dump_stack+0xe8/0x16e lib/dump_stack.c:113 | assign_lock_key kernel/locking/lockdep.c:786 [inline] | register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 | __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 | lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 | __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] | _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 | rtl_c2hcmd_launcher+0xd1/0x390 | drivers/net/wireless/realtek/rtlwifi/base.c:2344 | rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574 | rtl_usb_probe.cold+0x861/0xa70 | drivers/net/wireless/realtek/rtlwifi/usb.c:1093 | usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 | generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 | usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 | hub_port_connect drivers/usb/core/hub.c:5089 [inline] | hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] | port_event drivers/usb/core/hub.c:5350 [inline] | hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 | process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 | worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 | kthread+0x313/0x420 kernel/kthread.c:253 | ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Reported-by [email protected]
Signed-off-by Ping-Ke Shih <[email protected]>
--- drivers/net/wireless/realtek/rtlwifi/usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/wireless/realtek/rtlwifi/usb.c +3 -2
@@ -1064,13 +1064,13 @@ int rtl_usb_probe(struct usb_interface *intf, rtlpriv->cfg->ops->read_eeprom_info (hw); err =_rtl_usb_init (hw);if (err) - goto error_out; + goto error_out2;rtl_usb_init_sw (hw);/* Init mac80211 sw */ err =rtl_init_core (hw);if (err) {pr_err ("Can't allocate sw for mac80211\n" ); - goto error_out; + goto error_out2; }if (rtlpriv->cfg->ops->init_sw_vars (hw)) {pr_err ("Can't init_sw_vars\n" );
@@ -1091,6 +1091,7 @@ int rtl_usb_probe(struct usb_interface *intf, error_out:rtl_deinit_core (hw); +error_out2:_rtl_usb_io_handler_release (hw);usb_put_dev (udev);complete (&rtlpriv->firmware_loading_complete);
Signature · 1 line
2.21.0
Quoted 59 lines · On 5/29/19 1:57 AM, [email protected] wrote:
From: Ping-Ke Shih <[email protected]>
rtl_usb_probe()must do error handlertl_deinit_core()only ifrtl_init_core()is done, otherwise gotoerror_out2.| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl8192cu: Chip version 0x10 | rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl_usb: Too few input end points found | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS | Google 01/01/2011 | Workqueue: usb_hub_wq hub_event | Call Trace: | __dump_stack lib/dump_stack.c:77 [inline] | dump_stack+0xe8/0x16e lib/dump_stack.c:113 | assign_lock_key kernel/locking/lockdep.c:786 [inline] | register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 | __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 | lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 | __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] | _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 | rtl_c2hcmd_launcher+0xd1/0x390 | drivers/net/wireless/realtek/rtlwifi/base.c:2344 | rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574 | rtl_usb_probe.cold+0x861/0xa70 | drivers/net/wireless/realtek/rtlwifi/usb.c:1093 | usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 | generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 | usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 | hub_port_connect drivers/usb/core/hub.c:5089 [inline] | hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] | port_event drivers/usb/core/hub.c:5350 [inline] | hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 | process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 | worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 | kthread+0x313/0x420 kernel/kthread.c:253 | ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Quoted 2 lines
Reported-by [email protected]Signed-off-by Ping-Ke Shih <[email protected]>
I agree that this is a good fix.
Acked-by Larry Finger <[email protected]>
Larry
Quoted 33 lines
--- drivers/net/wireless/realtek/rtlwifi/usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)drivers/net/wireless/realtek/rtlwifi/usb.c +3
-2@@ -1064,13 +1064,13 @@ int rtl_usb_probe(struct usb_interface *intf, rtlpriv->cfg->ops->read_eeprom_info (hw); err =_rtl_usb_init (hw);if (err) - goto error_out; + goto error_out2;rtl_usb_init_sw (hw);/* Init mac80211 sw */ err =rtl_init_core (hw);if (err) {pr_err ("Can't allocate sw for mac80211\n" ); - goto error_out; + goto error_out2; }if (rtlpriv->cfg->ops->init_sw_vars (hw)) {pr_err ("Can't init_sw_vars\n" );@@ -1091,6 +1091,7 @@ int rtl_usb_probe(struct usb_interface *intf, error_out:rtl_deinit_core (hw); +error_out2:_rtl_usb_io_handler_release (hw);usb_put_dev (udev);complete (&rtlpriv->firmware_loading_complete);
Quoted 59 lines · <[email protected]> wrote:
From: Ping-Ke Shih <[email protected]>
rtl_usb_probe()must do error handlertl_deinit_core()only ifrtl_init_core()is done, otherwise gotoerror_out2.| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl8192cu: Chip version 0x10 | rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl_usb: Too few input end points found | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS | Google 01/01/2011 | Workqueue: usb_hub_wq hub_event | Call Trace: | __dump_stack lib/dump_stack.c:77 [inline] | dump_stack+0xe8/0x16e lib/dump_stack.c:113 | assign_lock_key kernel/locking/lockdep.c:786 [inline] | register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 | __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 | lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 | __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] | _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 | rtl_c2hcmd_launcher+0xd1/0x390 | drivers/net/wireless/realtek/rtlwifi/base.c:2344 | rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574 | rtl_usb_probe.cold+0x861/0xa70 | drivers/net/wireless/realtek/rtlwifi/usb.c:1093 | usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 | generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 | usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 | hub_port_connect drivers/usb/core/hub.c:5089 [inline] | hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] | port_event drivers/usb/core/hub.c:5350 [inline] | hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 | process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 | worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 | kthread+0x313/0x420 kernel/kthread.c:253 | ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Quoted 3 lines
Reported-by [email protected]Signed-off-by Ping-Ke Shih <[email protected]>Acked-by Larry Finger <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
6c0ed66f1a5b rtlwifi: rtl8192cu: fix error handle when usb probe failed
Signature · 3 lines
https://patchwork.kernel.org/patch/10966133/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches