Skip to contentSkip to conversation

extcon: arizona: Correct error handling on regmap_update_bits_check

PATCH Applied Charles Keepax 2 participants 2 messages May 29, 2019 – May 30, 2019 External connector subsystem (extcon)

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 extcon: arizona: Correct error handling on regmap_update_bits_check

Ensure the case when regmap_update_bits_check fails and the change variable is not updated is handled correctly.

---

Changes since v1:
- Print error message in driver remove

Thanks,
Charles

 drivers/extcon/extcon-arizona.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)
drivers/extcon/extcon-arizona.c +20 -13
index 9327479c719c2..519e89aedd4a0 100644
@@ -335,10 +335,12 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
 
 	arizona_extcon_pulse_micbias(info);
 
-	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
-				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
-				 &change);
-	if (!change) {
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
+				       &change);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to enable micd: %d\n", ret);
+	} else if (!change) {
 		regulator_disable(info->micvdd);
 		pm_runtime_put_autosuspend(info->dev);
 	}
@@ -350,12 +352,14 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
 	const char *widget = arizona_extcon_get_micbias(info);
 	struct snd_soc_dapm_context *dapm = arizona->dapm;
 	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm);
-	bool change;
+	bool change = false;
 	int ret;
 
-	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
-				 ARIZONA_MICD_ENA, 0,
-				 &change);
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, 0,
+				       &change);
+	if (ret < 0)
+		dev_err(arizona->dev, "Failed to disable micd: %d\n", ret);
 
 	ret = snd_soc_component_disable_pin(component, widget);
 	if (ret != 0)
@@ -1727,12 +1731,15 @@ static int arizona_extcon_remove(struct platform_device *pdev)
 	struct arizona *arizona = info->arizona;
 	int jack_irq_rise, jack_irq_fall;
 	bool change;
+	int ret;
 
-	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
-				 ARIZONA_MICD_ENA, 0,
-				 &change);
-
-	if (change) {
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, 0,
+				       &change);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
+			ret);
+	} else if (change) {
 		regulator_disable(info->micvdd);
 		pm_runtime_put(info->dev);
 	}
Signature · 1 line
2.11.0
maintainer Applied
#1 lore raw

Hi Charles,

Quoted 67 lines · Charles Keepax

Ensure the case when regmap_update_bits_check fails and the change variable is not updated is handled correctly.

---

Changes since v1:
- Print error message in driver remove

Thanks,
Charles

 drivers/extcon/extcon-arizona.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)
drivers/extcon/extcon-arizona.c +13 -13
index 9327479c719c2..519e89aedd4a0 100644
@@ -335,10 +335,12 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
 
 	arizona_extcon_pulse_micbias(info);
 
-	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
-				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
-				 &change);
-	if (!change) {
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
+				       &change);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to enable micd: %d\n", ret);
+	} else if (!change) {
 		regulator_disable(info->micvdd);
 		pm_runtime_put_autosuspend(info->dev);
 	}
@@ -350,12 +352,14 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
 	const char *widget = arizona_extcon_get_micbias(info);
 	struct snd_soc_dapm_context *dapm = arizona->dapm;
 	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm);
-	bool change;
+	bool change = false;
 	int ret;
 
-	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
-				 ARIZONA_MICD_ENA, 0,
-				 &change);
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, 0,
+				       &change);
+	if (ret < 0)
+		dev_err(arizona->dev, "Failed to disable micd: %d\n", ret);
 
 	ret = snd_soc_component_disable_pin(component, widget);
 	if (ret != 0)
@@ -1727,12 +1731,15 @@ static int arizona_extcon_remove(struct platform_device *pdev)
 	struct arizona *arizona = info->arizona;
 	int jack_irq_rise, jack_irq_fall;
 	bool change;
+	int ret;
 
-	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
-				 ARIZONA_MICD_ENA, 0,
-				 &change);
-
-	if (change) {

drivers/extcon/extcon-arizona.c static int arizona_extcon_remove(struct platform_device *pdev) · line 1745

Quoted 10 lines
drivers/extcon/extcon-arizona.c +7 -0
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, 0,
+				       &change);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
+			ret);
+	} else if (change) {
 		regulator_disable(info->micvdd);
 		pm_runtime_put(info->dev);
 	}

Applied it. Thanks.

Signature · 3 lines
Best Regards,
Chanwoo Choi
Samsung Electronics