davinci: remove older unmaintained boards
cover davinci: remove older unmaintained boards
From: Bartosz Golaszewski <[email protected]>
I'm working on updating the driver-model support for da850-lcdk and da850-evm. There are several boards in the tree that don't use the driver model but depend on DaVinci drivers. Since supporting both legacy and DM in driver code makes it messy, I'd like to propose to remove the following boards: calimain, ea20, eco5pk, ipam390, cm_t3517, mt_ventoux, twister and mcx.
They don't seem to still be maintained, don't use device-tree and don't select CONFIG_DM.
Bartosz Golaszewski (8):
calimain: remove board
ea20: remove board
eco5pk: remove board
ipam390: remove board
cm_t3517: remove board
mt_ventoux: remove board
twister: remove board
mcx: remove board
arch/arm/include/asm/mach-types.h | 6 - arch/arm/mach-davinci/Kconfig | 19 - arch/arm/mach-omap2/omap3/Kconfig | 31 -- board/8dtech/eco5pk/Kconfig | 12 - board/8dtech/eco5pk/MAINTAINERS | 6 - board/8dtech/eco5pk/Makefile | 8 - board/8dtech/eco5pk/eco5pk.c | 48 --- board/8dtech/eco5pk/eco5pk.h | 391 -------------------- board/Barix/ipam390/Kconfig | 12 - board/Barix/ipam390/MAINTAINERS | 6 - board/Barix/ipam390/Makefile | 8 - board/Barix/ipam390/README.ipam390 | 229 ------------ board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ----------- board/Barix/ipam390/ipam390.c | 335 ----------------- board/Barix/ipam390/u-boot-spl-ipam390.lds | 57 --- board/compulab/cm_t3517/Kconfig | 12 - board/compulab/cm_t3517/MAINTAINERS | 6 - board/compulab/cm_t3517/Makefile | 7 - board/compulab/cm_t3517/cm_t3517.c | 240 ------------ board/compulab/cm_t3517/mux.c | 235 ------------ board/compulab/common/eeprom.c | 2 +- board/davinci/ea20/Kconfig | 12 - board/davinci/ea20/MAINTAINERS | 6 - board/davinci/ea20/Makefile | 8 - board/davinci/ea20/ea20.c | 337 ----------------- board/htkw/mcx/Kconfig | 12 - board/htkw/mcx/MAINTAINERS | 6 - board/htkw/mcx/Makefile | 7 - board/htkw/mcx/mcx.c | 141 ------- board/htkw/mcx/mcx.h | 400 -------------------- board/omicron/calimain/Kconfig | 12 - board/omicron/calimain/MAINTAINERS | 7 - board/omicron/calimain/Makefile | 8 - board/omicron/calimain/calimain.c | 145 -------- board/technexion/twister/Kconfig | 12 - board/technexion/twister/MAINTAINERS | 6 - board/technexion/twister/Makefile | 7 - board/technexion/twister/twister.c | 160 -------- board/technexion/twister/twister.h | 400 -------------------- board/teejet/mt_ventoux/Kconfig | 12 - board/teejet/mt_ventoux/MAINTAINERS | 6 - board/teejet/mt_ventoux/Makefile | 7 - board/teejet/mt_ventoux/mt_ventoux.c | 342 ----------------- board/teejet/mt_ventoux/mt_ventoux.h | 403 --------------------- configs/calimain_defconfig | 37 -- configs/cm_t3517_defconfig | 60 --- configs/ea20_defconfig | 48 --- configs/eco5pk_defconfig | 45 --- configs/ipam390_defconfig | 45 --- configs/mcx_defconfig | 58 --- configs/mt_ventoux_defconfig | 54 --- configs/twister_defconfig | 52 --- include/configs/calimain.h | 272 -------------- include/configs/cm_t3517.h | 219 ----------- include/configs/ea20.h | 227 ------------ include/configs/eco5pk.h | 45 --- include/configs/ipam390.h | 237 ------------ include/configs/mcx.h | 294 --------------- include/configs/mt_ventoux.h | 46 --- include/configs/twister.h | 34 -- scripts/config_whitelist.txt | 1 - 61 files changed, 1 insertion(+), 6101 deletions(-) delete mode 100644 board/8dtech/eco5pk/Kconfig delete mode 100644 board/8dtech/eco5pk/MAINTAINERS delete mode 100644 board/8dtech/eco5pk/Makefile delete mode 100644 board/8dtech/eco5pk/eco5pk.c delete mode 100644 board/8dtech/eco5pk/eco5pk.h delete mode 100644 board/Barix/ipam390/Kconfig delete mode 100644 board/Barix/ipam390/MAINTAINERS delete mode 100644 board/Barix/ipam390/Makefile delete mode 100644 board/Barix/ipam390/README.ipam390 delete mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg delete mode 100644 board/Barix/ipam390/ipam390.c delete mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds delete mode 100644 board/compulab/cm_t3517/Kconfig delete mode 100644 board/compulab/cm_t3517/MAINTAINERS delete mode 100644 board/compulab/cm_t3517/Makefile delete mode 100644 board/compulab/cm_t3517/cm_t3517.c delete mode 100644 board/compulab/cm_t3517/mux.c delete mode 100644 board/davinci/ea20/Kconfig delete mode 100644 board/davinci/ea20/MAINTAINERS delete mode 100644 board/davinci/ea20/Makefile delete mode 100644 board/davinci/ea20/ea20.c delete mode 100644 board/htkw/mcx/Kconfig delete mode 100644 board/htkw/mcx/MAINTAINERS delete mode 100644 board/htkw/mcx/Makefile delete mode 100644 board/htkw/mcx/mcx.c delete mode 100644 board/htkw/mcx/mcx.h delete mode 100644 board/omicron/calimain/Kconfig delete mode 100644 board/omicron/calimain/MAINTAINERS delete mode 100644 board/omicron/calimain/Makefile delete mode 100644 board/omicron/calimain/calimain.c delete mode 100644 board/technexion/twister/Kconfig delete mode 100644 board/technexion/twister/MAINTAINERS delete mode 100644 board/technexion/twister/Makefile delete mode 100644 board/technexion/twister/twister.c delete mode 100644 board/technexion/twister/twister.h delete mode 100644 board/teejet/mt_ventoux/Kconfig delete mode 100644 board/teejet/mt_ventoux/MAINTAINERS delete mode 100644 board/teejet/mt_ventoux/Makefile delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.c delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.h delete mode 100644 configs/calimain_defconfig delete mode 100644 configs/cm_t3517_defconfig delete mode 100644 configs/ea20_defconfig delete mode 100644 configs/eco5pk_defconfig delete mode 100644 configs/ipam390_defconfig delete mode 100644 configs/mcx_defconfig delete mode 100644 configs/mt_ventoux_defconfig delete mode 100644 configs/twister_defconfig delete mode 100644 include/configs/calimain.h delete mode 100644 include/configs/cm_t3517.h delete mode 100644 include/configs/ea20.h delete mode 100644 include/configs/eco5pk.h delete mode 100644 include/configs/ipam390.h delete mode 100644 include/configs/mcx.h delete mode 100644 include/configs/mt_ventoux.h delete mode 100644 include/configs/twister.h
Signature · 1 line
2.21.0
PATCH 1/8 calimain: remove board
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-davinci/Kconfig | 5 - board/omicron/calimain/Kconfig | 12 -- board/omicron/calimain/MAINTAINERS | 7 - board/omicron/calimain/Makefile | 8 - board/omicron/calimain/calimain.c | 145 --------------- configs/calimain_defconfig | 37 ---- include/configs/calimain.h | 272 ----------------------------- 8 files changed, 487 deletions(-) delete mode 100644 board/omicron/calimain/Kconfig delete mode 100644 board/omicron/calimain/MAINTAINERS delete mode 100644 board/omicron/calimain/Makefile delete mode 100644 board/omicron/calimain/calimain.c delete mode 100644 configs/calimain_defconfig delete mode 100644 include/configs/calimain.h
arch/arm/include/asm/mach-types.h +0 -1
@@ -3475,7 +3475,6 @@#define MACH_TYPE_SGH_I710 3525#define MACH_TYPE_INTEGREPROSCB 3526#define MACH_TYPE_MONZA 3527 -#define MACH_TYPE_CALIMAIN 3528#define MACH_TYPE_MX6Q_SABREAUTO 3529#define MACH_TYPE_GMA01X 3530#define MACH_TYPE_SBC51 3531
arch/arm/mach-davinci/Kconfig +0 -5
@@ -27,10 +27,6 @@ config TARGET_OMAPL138_LCDK select SOC_DA8XX select SUPPORT_SPL -config TARGET_CALIMAIN - bool "Calimain board" - select SOC_DA850 - config TARGET_LEGOEV3 bool "LEGO MINDSTORMS EV3" select MACH_DAVINCI_DA850_EVM
@@ -149,7 +145,6 @@ endif source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/davinci/ea20/Kconfig" -source "board/omicron/calimain/Kconfig" source "board/lego/ev3/Kconfig" config SPL_LDSCRIPT
board/omicron/calimain/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_CALIMAIN - -config SYS_BOARD - default "calimain" - -config SYS_VENDOR - default "omicron" - -config SYS_CONFIG_NAME - default "calimain" - -endif
board/omicron/calimain/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -CALIMAIN BOARD -M: Manfred Rudigier <[email protected]> -M: Christoph Rüdisser <[email protected]> -S: Maintained -F: board/omicron/calimain/ -F: include/configs/calimain.h -F: configs/calimain_defconfig
board/omicron/calimain/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <[email protected]> - -obj-y := calimain.o
board/omicron/calimain/calimain.c deleted +0 -145
145 lines not on this page · raw message
configs/calimain_defconfig deleted +0 -37
@@ -1,37 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_SYS_TEXT_BASE=0x60000000 -CONFIG_TARGET_CALIMAIN=y -CONFIG_DA850_LOWLEVEL=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_BOOTDELAY=0 -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Calimain > " -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR="\x0b" -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CRC32_VERIFY=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DIAG=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_SYS_BOOTCOUNT_ADDR=0x01C23000 -CONFIG_DA8XX_GPIO=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MII=y -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550=y
include/configs/calimain.h deleted +0 -272
272 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 1/8 calimain: remove board
Quoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/15aae8e6/attachment.sig>
PATCH 2/8 ea20: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-davinci/Kconfig | 7 - board/davinci/ea20/Kconfig | 12 -- board/davinci/ea20/MAINTAINERS | 6 - board/davinci/ea20/Makefile | 8 - board/davinci/ea20/ea20.c | 337 ------------------------------ configs/ea20_defconfig | 48 ----- include/configs/ea20.h | 227 -------------------- 8 files changed, 646 deletions(-) delete mode 100644 board/davinci/ea20/Kconfig delete mode 100644 board/davinci/ea20/MAINTAINERS delete mode 100644 board/davinci/ea20/Makefile delete mode 100644 board/davinci/ea20/ea20.c delete mode 100644 configs/ea20_defconfig delete mode 100644 include/configs/ea20.h
arch/arm/include/asm/mach-types.h +0 -1
@@ -2960,7 +2960,6 @@#define MACH_TYPE_AX8008 2999#define MACH_TYPE_GNET_SGCE 3000#define MACH_TYPE_PXWNAS_500_1000 3001 -#define MACH_TYPE_EA20 3002#define MACH_TYPE_AWM2 3003#define MACH_TYPE_TI8148EVM 3004#define MACH_TYPE_SEABOARD 3005
arch/arm/mach-davinci/Kconfig +0 -7
@@ -16,12 +16,6 @@ config TARGET_DA850EVM select SOC_DA850 select SUPPORT_SPL -config TARGET_EA20 - bool "EA20 board" - select BOARD_LATE_INIT - select MACH_DAVINCI_DA850_EVM - select SOC_DA850 - config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" select SOC_DA8XX
@@ -144,7 +138,6 @@ endif source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" -source "board/davinci/ea20/Kconfig" source "board/lego/ev3/Kconfig" config SPL_LDSCRIPT
board/davinci/ea20/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_EA20 - -config SYS_BOARD - default "ea20" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "ea20" - -endif
board/davinci/ea20/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -EA20 BOARD -M: Stefano Babic <[email protected]> -S: Maintained -F: board/davinci/ea20/ -F: include/configs/ea20.h -F: configs/ea20_defconfig
board/davinci/ea20/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <[email protected]> - -obj-y += ea20.o
board/davinci/ea20/ea20.c deleted +0 -337
337 lines not on this page · raw message
configs/ea20_defconfig deleted +0 -48
48 lines not on this page · raw message
include/configs/ea20.h deleted +0 -227
227 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 2/8 ea20: remove board
Quoted 6 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
Best regards,
Stefano Babic
Quoted 731 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-davinci/Kconfig | 7 - board/davinci/ea20/Kconfig | 12 -- board/davinci/ea20/MAINTAINERS | 6 - board/davinci/ea20/Makefile | 8 - board/davinci/ea20/ea20.c | 337 ------------------------------ configs/ea20_defconfig | 48 ----- include/configs/ea20.h | 227 -------------------- 8 files changed, 646 deletions(-) delete mode 100644 board/davinci/ea20/Kconfig delete mode 100644 board/davinci/ea20/MAINTAINERS delete mode 100644 board/davinci/ea20/Makefile delete mode 100644 board/davinci/ea20/ea20.c delete mode 100644 configs/ea20_defconfig delete mode 100644 include/configs/ea20.harch/arm/include/asm/mach-types.h +0
-1@@ -2960,7 +2960,6 @@#define MACH_TYPE_AX8008 2999#define MACH_TYPE_GNET_SGCE 3000#define MACH_TYPE_PXWNAS_500_1000 3001 -#define MACH_TYPE_EA20 3002#define MACH_TYPE_AWM2 3003#define MACH_TYPE_TI8148EVM 3004#define MACH_TYPE_SEABOARD 3005arch/arm/mach-davinci/Kconfig +0
-7@@ -16,12 +16,6 @@ config TARGET_DA850EVM select SOC_DA850 select SUPPORT_SPL -config TARGET_EA20 - bool "EA20 board" - select BOARD_LATE_INIT - select MACH_DAVINCI_DA850_EVM - select SOC_DA850 - config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" select SOC_DA8XX@@ -144,7 +138,6 @@ endif source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" -source "board/davinci/ea20/Kconfig" source "board/lego/ev3/Kconfig" config SPL_LDSCRIPTboard/davinci/ea20/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_EA20 - -config SYS_BOARD - default "ea20" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "ea20" - -endifboard/davinci/ea20/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -EA20 BOARD -M: Stefano Babic <[email protected]> -S: Maintained -F: board/davinci/ea20/ -F: include/configs/ea20.h -F: configs/ea20_defconfigboard/davinci/ea20/Makefile deleted +0
-8@@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <[email protected]> - -obj-y += ea20.oboard/davinci/ea20/ea20.c deleted +0
-337@@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* (C) Copyright 2010 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de -* -* Based on da850evm.c, original Copyrights follow: -* -* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ -* -* Based on da830evm.c. Original Copyrights follow: -* -* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <[email protected]> -* Copyright (C) 2007 Sergey Kubushyn <[email protected]> -*/ - -#include <common.h> -#include <i2c.h> -#include <net.h> -#include <netdev.h> -#include <asm/mach-types.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/emac_defs.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> -#include <asm/gpio.h> -#include "../../../drivers/video/da8xx-fb.h" - -DECLARE_GLOBAL_DATA_PTR ; - -static const struct da8xx_panel lcd_panel = { -/* Casio COM57H531x */ - .name ="Casio_COM57H531x" , - .width =640 , - .height =480 , - .hfp =12 , - .hbp =144 , - .hsw =30 , - .vfp =10 , - .vbp =35 , - .vsw =3 , - .pxl_clk =25000000 , - .invert_pxl_clk =0 , -}; - -static const struct display_panel disp_panel = { -QVGA , -16 , -16 , -COLOR_ACTIVE , -}; - -static const struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias =255 , - .ac_bias_intrpt =0 , - .dma_burst_sz =16 , - .bpp =16 , - .fdd =255 , - .tft_alt_mode =0 , - .stn_565_mode =0 , - .mono_8bit_mode =0 , - .invert_line_clock =1 , - .invert_frm_clock =1 , - .sync_edge =0 , - .sync_ctrl =1 , - .raster_order =0 , -}; - -/* SPI0 pin muxer settings */ -static const struct pinmux_config spi1_pins[] = { - {pinmux (5 ),1 ,1 }, - {pinmux (5 ),1 ,2 }, - {pinmux (5 ),1 ,4 }, - {pinmux (5 ),1 ,5 } -}; - -/* I2C pin muxer settings */ -static const struct pinmux_config i2c_pins[] = { - {pinmux (4 ),2 ,2 }, - {pinmux (4 ),2 ,3 } -}; - -/* UART0 pin muxer settings */ -static const struct pinmux_config uart_pins[] = { - {pinmux (3 ),2 ,7 }, - {pinmux (3 ),2 ,6 }, - {pinmux (3 ),2 ,4 }, - {pinmux (3 ),2 ,5 } -}; - -#ifdef CONFIG_DRIVER_TI_EMAC -#define HAS_RMII 1 -static const struct pinmux_config emac_pins[] = { - {pinmux (14 ),8 ,2 }, - {pinmux (14 ),8 ,3 }, - {pinmux (14 ),8 ,4 }, - {pinmux (14 ),8 ,5 }, - {pinmux (14 ),8 ,6 }, - {pinmux (14 ),8 ,7 }, - {pinmux (15 ),8 ,1 }, - {pinmux (4 ),8 ,0 }, - {pinmux (4 ),8 ,1 } -}; -#endif - -#ifdef CONFIG_NAND_DAVINCI -const struct pinmux_config nand_pins[] = { - {pinmux (7 ),1 ,0 },/* CS2 */ - {pinmux (7 ),0 ,1 },/* CS3 in three state*/ - {pinmux (7 ),1 ,4 },/* EMA_WE */ - {pinmux (7 ),1 ,5 },/* EMA_OE */ - {pinmux (9 ),1 ,0 },/* EMA_D[7] */ - {pinmux (9 ),1 ,1 },/* EMA_D[6] */ - {pinmux (9 ),1 ,2 },/* EMA_D[5] */ - {pinmux (9 ),1 ,3 },/* EMA_D[4] */ - {pinmux (9 ),1 ,4 },/* EMA_D[3] */ - {pinmux (9 ),1 ,5 },/* EMA_D[2] */ - {pinmux (9 ),1 ,6 },/* EMA_D[1] */ - {pinmux (9 ),1 ,7 },/* EMA_D[0] */ - {pinmux (12 ),1 ,5 },/* EMA_A[2] */ - {pinmux (12 ),1 ,6 },/* EMA_A[1] */ - {pinmux (6 ),1 ,0 }/* EMA_CLK */ -}; -#endif - -const struct pinmux_config gpio_pins[] = { - {pinmux (13 ),8 ,0 },/* GPIO6[15] RESETOUTn on SOM*/ - {pinmux (13 ),8 ,5 },/* GPIO6[10] U0_SW0 on EA20-00101_2*/ - {pinmux (13 ),8 ,3 },/* GPIO6[12] U0_SW1 on EA20-00101_2*/ - {pinmux (19 ),8 ,5 },/* GPIO6[1] DISP_ON */ - {pinmux (14 ),8 ,1 }/* GPIO6[6] LCD_B_PWR*/ -}; - -const struct pinmux_config lcd_pins[] = { - {pinmux (17 ),2 ,1 },/* LCD_D_0 */ - {pinmux (17 ),2 ,0 },/* LCD_D_1 */ - {pinmux (16 ),2 ,7 },/* LCD_D_2 */ - {pinmux (16 ),2 ,6 },/* LCD_D_3 */ - {pinmux (16 ),2 ,5 },/* LCD_D_4 */ - {pinmux (16 ),2 ,4 },/* LCD_D_5 */ - {pinmux (16 ),2 ,3 },/* LCD_D_6 */ - {pinmux (16 ),2 ,2 },/* LCD_D_7 */ - {pinmux (18 ),2 ,1 },/* LCD_D_8 */ - {pinmux (18 ),2 ,0 },/* LCD_D_9 */ - {pinmux (17 ),2 ,7 },/* LCD_D_10 */ - {pinmux (17 ),2 ,6 },/* LCD_D_11 */ - {pinmux (17 ),2 ,5 },/* LCD_D_12 */ - {pinmux (17 ),2 ,4 },/* LCD_D_13 */ - {pinmux (17 ),2 ,3 },/* LCD_D_14 */ - {pinmux (17 ),2 ,2 },/* LCD_D_15 */ - {pinmux (18 ),2 ,6 },/* LCD_PCLK */ - {pinmux (19 ),2 ,0 },/* LCD_HSYNC */ - {pinmux (19 ),2 ,1 },/* LCD_VSYNC */ - {pinmux (19 ),2 ,6 },/* DA850_NLCD_AC_ENB_CS */ -}; - -const struct pinmux_config halten_pin[] = { - {pinmux (3 ),4 ,2 }/* GPIO8[6] HALTEN */ -}; - -static const struct pinmux_resource pinmuxes[] = { -#ifdef CONFIG_SPI_FLASH -PINMUX_ITEM (spi1_pins), -#endif -PINMUX_ITEM (uart_pins), -PINMUX_ITEM (i2c_pins), -#ifdef CONFIG_NAND_DAVINCI -PINMUX_ITEM (nand_pins), -#endif -#ifdef CONFIG_VIDEO -PINMUX_ITEM (lcd_pins), -#endif -}; - -static const struct lpsc_resource lpsc[] = { - {DAVINCI_LPSC_AEMIF },/* NAND, NOR */ - {DAVINCI_LPSC_SPI1 },/* Serial Flash */ - {DAVINCI_LPSC_EMAC },/* image download */ - {DAVINCI_LPSC_UART0 },/* console */ - {DAVINCI_LPSC_GPIO }, - {DAVINCI_LPSC_LCDC },/* LCD */ -}; - -int board_early_init_f (void ) -{ -/* PinMux for GPIO */ -if (davinci_configure_pin_mux (gpio_pins,ARRAY_SIZE (gpio_pins)) !=0 ) -return 1 ; - -/* Set DISP_ON high to enable LCD output*/ -gpio_direction_output (97 ,1 ); - -/* Set the RESETOUTn low */ -gpio_direction_output (111 ,0 ); - -/* Set U0_SW0 low for UART0 as console*/ -gpio_direction_output (106 ,0 ); - -/* Set U0_SW1 low for UART0 as console*/ -gpio_direction_output (108 ,0 ); - -/* Set LCD_B_PWR low to power down LCD Backlight*/ -gpio_direction_output (102 ,0 ); - -irq_init (); - -/* -* NAND CS setup - cycle counts based on da850evm NAND timings in the -* Linux kernel @ 25MHz EMIFA -*/ -#ifdef CONFIG_NAND_DAVINCI -writel ((DAVINCI_ABCR_WSETUP (0 ) | -DAVINCI_ABCR_WSTROBE (1 ) | -DAVINCI_ABCR_WHOLD (0 ) | -DAVINCI_ABCR_RSETUP (0 ) | -DAVINCI_ABCR_RSTROBE (1 ) | -DAVINCI_ABCR_RHOLD (0 ) | -DAVINCI_ABCR_TA (0 ) | -DAVINCI_ABCR_ASIZE_8BIT ), - &davinci_emif_regs->ab1cr);/* CS2 */ -#endif - -/* -* Power on required peripherals -* ARM does not have access by default to PSC0 and PSC1 -* assuming here that the DSP bootloader has set the IOPU -* such that PSC access is available to ARM -*/ -if (da8xx_configure_lpsc_items (lpsc,ARRAY_SIZE (lpsc))) -return 1 ; - -/* setup the SUSPSRC for ARM to control emulation suspend */ -writel (readl (&davinci_syscfg_regs->suspsrc) & - ~(DAVINCI_SYSCFG_SUSPSRC_EMAC |DAVINCI_SYSCFG_SUSPSRC_I2C | -DAVINCI_SYSCFG_SUSPSRC_SPI1 |DAVINCI_SYSCFG_SUSPSRC_TIMER0 | -DAVINCI_SYSCFG_SUSPSRC_UART0 ), - &davinci_syscfg_regs->suspsrc); - -/* configure pinmux settings */ -if (davinci_configure_pin_mux_items (pinmuxes,ARRAY_SIZE (pinmuxes))) -return 1 ; - -#ifdef CONFIG_DRIVER_TI_EMAC -if (davinci_configure_pin_mux (emac_pins,ARRAY_SIZE (emac_pins)) !=0 ) -return 1 ; - -davinci_emac_mii_mode_sel (HAS_RMII ); -#endif /* CONFIG_DRIVER_TI_EMAC */ - -/* enable the console UART */ -writel ((DAVINCI_UART_PWREMU_MGMT_FREE |DAVINCI_UART_PWREMU_MGMT_URRST | -DAVINCI_UART_PWREMU_MGMT_UTRST ), - &davinci_uart0_ctrl_regs->pwremu_mgmt); - -/* -* Reconfigure the LCDC priority to the highest to ensure that -* the throughput/latency requirements for the LCDC are met. -*/ -writel (readl (&davinci_syscfg_regs->mstpri[2 ]) &0x0fffffff , - &davinci_syscfg_regs->mstpri[2 ]); - - -return 0 ; -} - -/* -* Do not overwrite the console -* Use always serial for U-Boot console -*/ -int overwrite_console (void ) -{ -return 1 ; -} - -int board_init (void ) -{ -/* arch number of the board */ - gd->bd->bi_arch_number =MACH_TYPE_EA20 ; - -/* address of boot parameters */ - gd->bd->bi_boot_params =LINUX_BOOT_PARAM_ADDR ; - -da8xx_video_init (&lcd_panel, &lcd_cfg,16 ); - -return 0 ; -} - -#ifdef CONFIG_BOARD_LATE_INIT - -int board_late_init (void ) -{ -unsigned char buf[2 ]; -int ret; - -/* PinMux for HALTEN */ -if (davinci_configure_pin_mux (halten_pin,ARRAY_SIZE (halten_pin)) !=0 ) -return 1 ; - -/* Set HALTEN to high */ -gpio_direction_output (134 ,1 ); - -/* Set fixed contrast settings for LCD via I2C potentiometer */ - buf[0 ] =0x00 ; - buf[1 ] =0xd7 ; - ret =i2c_write (0x2e ,6 ,1 , buf,2 ); -if (ret) -puts ("\nContrast Settings FAILED\n" ); - -/* Set LCD_B_PWR high to power up LCD Backlight*/ -gpio_set_value (102 ,1 ); -return 0 ; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -#ifdef CONFIG_DRIVER_TI_EMAC - -/* -* Initializes on-board ethernet controllers. -*/ -int board_eth_init (bd_t *bis) -{ -if (!davinci_emac_initialize ()) { -printf ("Error: Ethernet init failed!\n" ); -return -1 ; - } - -/* -* This board has a RMII PHY. However, the MDC line on the SOM -* must not be disabled (there is no MII PHY on the -* baseboard) via the GPIO2[6], because this pin -* disables at the same time the SPI flash. -*/ - -return 0 ; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ configs/ea20_defconfig deleted +0
-48@@ -1,48 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_SYS_TEXT_BASE=0xc1080000 -CONFIG_TARGET_EA20=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ea20 > " -CONFIG_CMD_ASKENV=y -CONFIG_CRC32_VERIFY=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_DIAG=y -CONFIG_CMD_UBI=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_DA8XX_GPIO=y -CONFIG_SYS_I2C_DAVINCI=y -# CONFIG_MMC is not set -CONFIG_NAND=y -CONFIG_NAND_DAVINCI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=30000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MII=y -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DAVINCI_SPI=y -CONFIG_VIDEO=y -# CONFIG_VIDEO_SW_CURSOR is not setinclude/configs/ea20.h deleted +0
-227@@ -1,227 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ -* -* Based on davinci_dvevm.h. Original Copyrights follow: -* -* Copyright (C) 2007 Sergey Kubushyn <[email protected]> -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* -* Board -*/ -#define CONFIG_USE_SPIFLASH -#define CONFIG_SYS_USE_NAND -#define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE -#define CONFIG_PREBOOT - -/* -* SoC Configuration -*/ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* -* Memory Info -*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024)/* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE/* DDR Start */ -#define PHYS_SDRAM_1_SIZE (64 << 20)/* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20)/* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) - -/* -* Serial Driver info -*/ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4/* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE/* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) - -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) - -/* -* I2C Configuration -*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10/* Bogus, master-only in U-Boot */ - -/* -* Network & Ethernet Configuration -*/ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET 0x80000 -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#endif - -#if defined(CONFIG_VIDEO ) -#define CONFIG_VIDEO_DA8XX -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#endif - -/* -* U-Boot general configuration -*/ -#define CONFIG_BOOTFILE "uImage"/* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_MX_CYCLIC - -/* -* Linux Information -*/ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -/* NAND Setup */ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_NO_SUBPAGE -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of NAND devices */ -#endif - -#if !defined(CONFIG_SYS_USE_NAND ) && \ - !defined(CONFIG_USE_NOR ) && \ - !defined(CONFIG_USE_SPIFLASH ) -#define CONFIG_ENV_SIZE (16 << 10) -#endif - -/* additions for new relocation code, must added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) -/* -* Default environment and default scripts -* to update uboot and load kernel -*/ - -#define CONFIG_HOSTNAME "ea20" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "as=3\0" \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "rfsbargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rfsbpath}\0" \ - "testrfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${testrfspath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ - "0x${ramdisk_addr_r},4M\0" \ - "mtdids=nand0=davinci_nand.0\0" \ - "serverip=192.168.5.249\0" \ - "ipaddr=192.168.5.248\0" \ - "rootpath=/opt/eldk/arm\0" \ - "splashpos=230,180\0" \ - "testrfspath=/opt/eldk/test_arm\0" \ - "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ - "ubi.mtd=${as} root=ubi0:rootfs\0" \ - "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ - "ubi.mtd=${as} root=ubi0:rootfs\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${consoledev},${baudrate}n8\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ - "consoledev=ttyS0\0" \ - "loadaddr=c0000014\0" \ - "memory=32M\0" \ - "kernel_addr_r=c0700000\0" \ - "hostname=" CONFIG_HOSTNAME "\0" \ - "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ - "ramdisk_file=" CONFIG_HOSTNAME "/image.ext2\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr_r}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr_r}\0" \ - "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ - "run rfsbargs addip addtty addmtd addmisc addmem; " \ - "bootm ${kernel_addr_r}\0" \ - "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run testrfsargs addip addtty addmtd addmisc addmem; " \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "ubifsload ${kernel_addr_r} /boot/uImage;" \ - "ubifsumount; run nandargs addip addtty " \ - "addmtd addmisc addmem;clrlogo;" \ - "bootm ${kernel_addr_r}\0" \ - "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "ubifsload ${kernel_addr_r} /boot/uImage;" \ - "ubifsumount; run nandrwargs addip addtty " \ - "addmtd addmisc addmem;clrlogo;" \ - "bootm ${kernel_addr_r}\0" \ - "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ - " addip addtty addmtd addmisc addmem;" \ - "clrlogo;bootm ${kernel_addr_r}\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ - "load_magic=if sf probe 0;then sf " \ - "read c0000000 0x10000 0x60000;fi\0" \ - "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "if ubifsload c0000014 /boot/u-boot.bin;" \ - "then mw c0000008 ${filesize};else echo Error reading" \ - " u-boot from nand!;fi\0" \ - "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ - "0x60000;tftp c0000014 ${u-boot};" \ - "mw c0000008 ${filesize};fi\0" \ - "upd=if sf probe 0;then sf erase 10000 60000;" \ - "sf write c0000000 10000 60000;fi\0" \ - "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ - "sf erase 0 10000;" \ - "sf write 0xc0700000 0 ${filesize};fi\0" \ - "ubootupd_net=if run load_net;then echo Updating u-boot;" \ - "if run upd; then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ - "bootcmd=run net_testrfs\0" - -#include <asm/arch/hardware.h> - -#endif /* __CONFIG_H */
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 2/8 ea20: remove board
In reply to Bartosz GolaszewskiQuoted 9 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>Acked-by Stefano Babic <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/842d0d39/attachment.sig>
PATCH 3/8 eco5pk: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/mach-omap2/omap3/Kconfig | 5 - board/8dtech/eco5pk/Kconfig | 12 - board/8dtech/eco5pk/MAINTAINERS | 6 - board/8dtech/eco5pk/Makefile | 8 - board/8dtech/eco5pk/eco5pk.c | 48 ---- board/8dtech/eco5pk/eco5pk.h | 391 ------------------------------ configs/eco5pk_defconfig | 45 ---- include/configs/eco5pk.h | 45 ---- 8 files changed, 560 deletions(-) delete mode 100644 board/8dtech/eco5pk/Kconfig delete mode 100644 board/8dtech/eco5pk/MAINTAINERS delete mode 100644 board/8dtech/eco5pk/Makefile delete mode 100644 board/8dtech/eco5pk/eco5pk.c delete mode 100644 board/8dtech/eco5pk/eco5pk.h delete mode 100644 configs/eco5pk_defconfig delete mode 100644 include/configs/eco5pk.h
arch/arm/mach-omap2/omap3/Kconfig +0 -5
@@ -112,10 +112,6 @@ config TARGET_OMAP3_PANDORA select OMAP3_GPIO_4 select OMAP3_GPIO_6 -config TARGET_ECO5PK - bool "ECO5PK" - select OMAP3_GPIO_5 if USB_EHCI_HCD - config TARGET_TRICORDER bool "Tricorder" select OMAP3_GPIO_2
@@ -210,7 +206,6 @@ source "board/overo/Kconfig" source "board/logicpd/zoom1/Kconfig" source "board/ti/am3517crane/Kconfig" source "board/pandora/Kconfig" -source "board/8dtech/eco5pk/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig"
board/8dtech/eco5pk/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_ECO5PK - -config SYS_BOARD - default "eco5pk" - -config SYS_VENDOR - default "8dtech" - -config SYS_CONFIG_NAME - default "eco5pk" - -endif
board/8dtech/eco5pk/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -ECO5PK BOARD -M: Raphael Assenat <[email protected]> -S: Maintained -F: board/8dtech/eco5pk/ -F: include/configs/eco5pk.h -F: configs/eco5pk_defconfig
board/8dtech/eco5pk/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# Adapted from ti/evm/Makefile - -obj-y := eco5pk.o
board/8dtech/eco5pk/eco5pk.c deleted +0 -48
48 lines not on this page · raw message
board/8dtech/eco5pk/eco5pk.h deleted +0 -391
391 lines not on this page · raw message
configs/eco5pk_defconfig deleted +0 -45
45 lines not on this page · raw message
include/configs/eco5pk.h deleted +0 -45
45 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 3/8 eco5pk: remove board
Quoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/95e991f7/attachment.sig>
PATCH 4/8 ipam390: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/mach-davinci/Kconfig | 7 - board/Barix/ipam390/Kconfig | 12 - board/Barix/ipam390/MAINTAINERS | 6 - board/Barix/ipam390/Makefile | 8 - board/Barix/ipam390/README.ipam390 | 229 -------------- board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ------------- board/Barix/ipam390/ipam390.c | 335 --------------------- board/Barix/ipam390/u-boot-spl-ipam390.lds | 57 ---- configs/ipam390_defconfig | 45 --- include/configs/ipam390.h | 237 --------------- 10 files changed, 1138 deletions(-) delete mode 100644 board/Barix/ipam390/Kconfig delete mode 100644 board/Barix/ipam390/MAINTAINERS delete mode 100644 board/Barix/ipam390/Makefile delete mode 100644 board/Barix/ipam390/README.ipam390 delete mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg delete mode 100644 board/Barix/ipam390/ipam390.c delete mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds delete mode 100644 configs/ipam390_defconfig delete mode 100644 include/configs/ipam390.h
arch/arm/mach-davinci/Kconfig +0 -7
@@ -4,12 +4,6 @@ choice prompt "DaVinci board select" optional -config TARGET_IPAM390 - bool "IPAM390 board" - select MACH_DAVINCI_DA850_EVM - select SOC_DA850 - select SUPPORT_SPL - config TARGET_DA850EVM bool "DA850 EVM board" select MACH_DAVINCI_DA850_EVM
@@ -136,7 +130,6 @@ config SYS_DA850_PLL1_PLLDIV3 endif -source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/lego/ev3/Kconfig"
board/Barix/ipam390/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_IPAM390 - -config SYS_BOARD - default "ipam390" - -config SYS_VENDOR - default "Barix" - -config SYS_CONFIG_NAME - default "ipam390" - -endif
board/Barix/ipam390/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -IPAM390 BOARD -M: Heiko Schocher <[email protected]> -S: Maintained -F: board/Barix/ipam390/ -F: include/configs/ipam390.h -F: configs/ipam390_defconfig
board/Barix/ipam390/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <[email protected]> - -obj-y += ipam390.o
board/Barix/ipam390/README.ipam390 deleted +0 -229
229 lines not on this page · raw message
board/Barix/ipam390/ipam390-ais-uart.cfg deleted +0 -202
202 lines not on this page · raw message
board/Barix/ipam390/ipam390.c deleted +0 -335
335 lines not on this page · raw message
board/Barix/ipam390/u-boot-spl-ipam390.lds deleted +0 -57
57 lines not on this page · raw message
configs/ipam390_defconfig deleted +0 -45
45 lines not on this page · raw message
include/configs/ipam390.h deleted +0 -237
237 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 4/8 ipam390: remove board
Hello Bartosz,
Am 17.05.2019 um 11:17 schrieb Bartosz Golaszewski:
Quoted 20 lines
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>--- arch/arm/mach-davinci/Kconfig | 7 - board/Barix/ipam390/Kconfig | 12 - board/Barix/ipam390/MAINTAINERS | 6 - board/Barix/ipam390/Makefile | 8 - board/Barix/ipam390/README.ipam390 | 229 -------------- board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ------------- board/Barix/ipam390/ipam390.c | 335 --------------------- board/Barix/ipam390/u-boot-spl-ipam390.lds | 57 ---- configs/ipam390_defconfig | 45 --- include/configs/ipam390.h | 237 --------------- 10 files changed, 1138 deletions(-)
Quoted 9 lines
delete mode 100644 board/Barix/ipam390/Kconfig delete mode 100644 board/Barix/ipam390/MAINTAINERS delete mode 100644 board/Barix/ipam390/Makefile delete mode 100644 board/Barix/ipam390/README.ipam390 delete mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg delete mode 100644
board/Barix/ipam390/ipam390.cdelete mode 100644board/Barix/ipam390/u-boot-spl-ipam390.ldsdelete mode 100644 configs/ipam390_defconfig
delete mode 100644include/configs/ipam390.h
Thanks!
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 4/8 ipam390: remove board
In reply to Bartosz GolaszewskiQuoted 9 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>Acked-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/e32fb342/attachment.sig>
PATCH 5/8 cm_t3517: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-omap2/omap3/Kconfig | 7 - board/compulab/cm_t3517/Kconfig | 12 -- board/compulab/cm_t3517/MAINTAINERS | 6 - board/compulab/cm_t3517/Makefile | 7 - board/compulab/cm_t3517/cm_t3517.c | 240 ---------------------------- board/compulab/cm_t3517/mux.c | 235 --------------------------- board/compulab/common/eeprom.c | 2 +- configs/cm_t3517_defconfig | 60 ------- include/configs/cm_t3517.h | 219 ------------------------- scripts/config_whitelist.txt | 1 - 11 files changed, 1 insertion(+), 789 deletions(-) delete mode 100644 board/compulab/cm_t3517/Kconfig delete mode 100644 board/compulab/cm_t3517/MAINTAINERS delete mode 100644 board/compulab/cm_t3517/Makefile delete mode 100644 board/compulab/cm_t3517/cm_t3517.c delete mode 100644 board/compulab/cm_t3517/mux.c delete mode 100644 configs/cm_t3517_defconfig delete mode 100644 include/configs/cm_t3517.h
arch/arm/include/asm/mach-types.h +0 -1
@@ -2716,7 +2716,6 @@#define MACH_TYPE_VPNEXT_MPU 2747#define MACH_TYPE_BCMRING_TABLET_V1 2748#define MACH_TYPE_SGARM10 2749 -#define MACH_TYPE_CM_T3517 2750#define MACH_TYPE_OMAP3_CPS 2751#define MACH_TYPE_AXAR1500_RECEIVER 2752#define MACH_TYPE_WBD222 2753
arch/arm/mach-omap2/omap3/Kconfig +0 -7
@@ -54,12 +54,6 @@ config TARGET_CM_T35 select OMAP3_GPIO_5 select OMAP3_GPIO_6 if LED_STATUS -config TARGET_CM_T3517 - bool "CompuLab CM-T3517 boards" - select OMAP3_GPIO_2 - select OMAP3_GPIO_5 - select OMAP3_GPIO_6 if LED_STATUS - config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select DM
@@ -198,7 +192,6 @@ source "board/logicpd/am3517evm/Kconfig" source "board/teejet/mt_ventoux/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" -source "board/compulab/cm_t3517/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig"
board/compulab/cm_t3517/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_CM_T3517 - -config SYS_BOARD - default "cm_t3517" - -config SYS_VENDOR - default "compulab" - -config SYS_CONFIG_NAME - default "cm_t3517" - -endif
board/compulab/cm_t3517/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CM_T3517 BOARD -M: Igor Grinberg <[email protected]> -S: Maintained -F: board/compulab/cm_t3517/ -F: include/configs/cm_t3517.h -F: configs/cm_t3517_defconfig
board/compulab/cm_t3517/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> -# -# Authors: Igor Grinberg <[email protected]> - -obj-y += cm_t3517.o mux.o
board/compulab/cm_t3517/cm_t3517.c deleted +0 -240
240 lines not on this page · raw message
board/compulab/cm_t3517/mux.c deleted +0 -235
235 lines not on this page · raw message
board/compulab/common/eeprom.c +1 -1
@@ -410,7 +410,7 @@ struct eeprom_field layout_legacy[5] = {#define layout_legacy layout_unknown#endif -#if defined(CONFIG_CM_T3X ) || defined(CONFIG_CM_T3517 ) +#if defined(CONFIG_CM_T3X )struct eeprom_field layout_v1[12 ] = { {"Major Revision" ,2 ,NULL ,DEFINE_PRINT_UPDATE (bin_ver) }, { "Minor Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
configs/cm_t3517_defconfig deleted +0 -60
60 lines not on this page · raw message
include/configs/cm_t3517.h deleted +0 -219
219 lines not on this page · raw message
scripts/config_whitelist.txt +0 -1
@@ -219,7 +219,6 @@ CONFIG_CM_MULTIPLE_SSRAM CONFIG_CM_REMAP CONFIG_CM_SPD_DETECT CONFIG_CM_T335 -CONFIG_CM_T3517 CONFIG_CM_T3X CONFIG_CM_T43 CONFIG_CM_T54
Signature · 1 line
2.21.0
PATCH 5/8 cm_t3517: remove board
Quoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/4dea4ee5/attachment.sig>
PATCH 6/8 mt_ventoux: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-omap2/omap3/Kconfig | 6 - board/teejet/mt_ventoux/Kconfig | 12 - board/teejet/mt_ventoux/MAINTAINERS | 6 - board/teejet/mt_ventoux/Makefile | 7 - board/teejet/mt_ventoux/mt_ventoux.c | 342 ----------------------- board/teejet/mt_ventoux/mt_ventoux.h | 403 --------------------------- configs/mt_ventoux_defconfig | 54 ---- include/configs/mt_ventoux.h | 46 --- 9 files changed, 877 deletions(-) delete mode 100644 board/teejet/mt_ventoux/Kconfig delete mode 100644 board/teejet/mt_ventoux/MAINTAINERS delete mode 100644 board/teejet/mt_ventoux/Makefile delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.c delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.h delete mode 100644 configs/mt_ventoux_defconfig delete mode 100644 include/configs/mt_ventoux.h
arch/arm/include/asm/mach-types.h +0 -1
@@ -3772,7 +3772,6 @@#define MACH_TYPE_IMXT_NAV 3829#define MACH_TYPE_IMXT_FULL 3830#define MACH_TYPE_AG09015 3831 -#define MACH_TYPE_AM3517_MT_VENTOUX 3832#define MACH_TYPE_DP1ARM9 3833#define MACH_TYPE_PICASSO_M 3834#define MACH_TYPE_VIDEO_GADGET 3835
arch/arm/mach-omap2/omap3/Kconfig +0 -6
@@ -34,11 +34,6 @@ config TARGET_AM3517_EVM select DM_SERIAL imply CMD_DM -config TARGET_MT_VENTOUX - bool "TeeJet Mt.Ventoux" - select OMAP3_GPIO_4 - select OMAP3_GPIO_5 if USB_EHCI_HCD - config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select DM
@@ -189,7 +184,6 @@ config SYS_SOC default "omap3" source "board/logicpd/am3517evm/Kconfig" -source "board/teejet/mt_ventoux/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" source "board/timll/devkit8000/Kconfig"
board/teejet/mt_ventoux/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MT_VENTOUX - -config SYS_BOARD - default "mt_ventoux" - -config SYS_VENDOR - default "teejet" - -config SYS_CONFIG_NAME - default "mt_ventoux" - -endif
board/teejet/mt_ventoux/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MT_VENTOUX BOARD -M: Stefano Babic <[email protected]> -S: Maintained -F: board/teejet/mt_ventoux/ -F: include/configs/mt_ventoux.h -F: configs/mt_ventoux_defconfig
board/teejet/mt_ventoux/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Ilya Yanok, Emcraft Systems -# -# Based on ti/evm/Makefile - -obj-y := mt_ventoux.o
board/teejet/mt_ventoux/mt_ventoux.c deleted +0 -342
342 lines not on this page · raw message
board/teejet/mt_ventoux/mt_ventoux.h deleted +0 -403
403 lines not on this page · raw message
configs/mt_ventoux_defconfig deleted +0 -54
54 lines not on this page · raw message
include/configs/mt_ventoux.h deleted +0 -46
46 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 6/8 mt_ventoux: remove board
Quoted 6 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
Best regards,
Stefano Babic
Quoted 970 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-omap2/omap3/Kconfig | 6 - board/teejet/mt_ventoux/Kconfig | 12 - board/teejet/mt_ventoux/MAINTAINERS | 6 - board/teejet/mt_ventoux/Makefile | 7 - board/teejet/mt_ventoux/mt_ventoux.c | 342 ----------------------- board/teejet/mt_ventoux/mt_ventoux.h | 403 --------------------------- configs/mt_ventoux_defconfig | 54 ---- include/configs/mt_ventoux.h | 46 --- 9 files changed, 877 deletions(-) delete mode 100644 board/teejet/mt_ventoux/Kconfig delete mode 100644 board/teejet/mt_ventoux/MAINTAINERS delete mode 100644 board/teejet/mt_ventoux/Makefile delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.c delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.h delete mode 100644 configs/mt_ventoux_defconfig delete mode 100644 include/configs/mt_ventoux.harch/arm/include/asm/mach-types.h +0
-1@@ -3772,7 +3772,6 @@#define MACH_TYPE_IMXT_NAV 3829#define MACH_TYPE_IMXT_FULL 3830#define MACH_TYPE_AG09015 3831 -#define MACH_TYPE_AM3517_MT_VENTOUX 3832#define MACH_TYPE_DP1ARM9 3833#define MACH_TYPE_PICASSO_M 3834#define MACH_TYPE_VIDEO_GADGET 3835arch/arm/mach-omap2/omap3/Kconfig +0
-6@@ -34,11 +34,6 @@ config TARGET_AM3517_EVM select DM_SERIAL imply CMD_DM -config TARGET_MT_VENTOUX - bool "TeeJet Mt.Ventoux" - select OMAP3_GPIO_4 - select OMAP3_GPIO_5 if USB_EHCI_HCD - config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select DM@@ -189,7 +184,6 @@ config SYS_SOC default "omap3" source "board/logicpd/am3517evm/Kconfig" -source "board/teejet/mt_ventoux/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" source "board/timll/devkit8000/Kconfig"board/teejet/mt_ventoux/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_MT_VENTOUX - -config SYS_BOARD - default "mt_ventoux" - -config SYS_VENDOR - default "teejet" - -config SYS_CONFIG_NAME - default "mt_ventoux" - -endifboard/teejet/mt_ventoux/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -MT_VENTOUX BOARD -M: Stefano Babic <[email protected]> -S: Maintained -F: board/teejet/mt_ventoux/ -F: include/configs/mt_ventoux.h -F: configs/mt_ventoux_defconfigboard/teejet/mt_ventoux/Makefile deleted +0
-7@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Ilya Yanok, Emcraft Systems -# -# Based on ti/evm/Makefile - -obj-y := mt_ventoux.oboard/teejet/mt_ventoux/mt_ventoux.c deleted +0
-342@@ -1,342 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2011 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de. -* -* Copyright (C) 2009 TechNexion Ltd. -*/ - -#include <common.h> -#include <netdev.h> -#include <malloc.h> -#include <fpga.h> -#include <video_fb.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/omap_gpio.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/dss.h> -#include <asm/arch/clock.h> -#include <i2c.h> -#include <spartan3.h> -#include <asm/gpio.h> -#ifdef CONFIG_USB_EHCI_HCD -#include <usb.h> -#include <asm/ehci-omap.h> -#endif -#include "mt_ventoux.h" - -DECLARE_GLOBAL_DATA_PTR ; - -#define BUZZER 140 -#define SPEAKER 141 -#define USB1_PWR 127 -#define USB2_PWR 149 - -#ifndef CONFIG_FPGA -#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" -#endif - -#define FPGA_RESET 62 -#define FPGA_PROG 116 -#define FPGA_CCLK 117 -#define FPGA_DIN 118 -#define FPGA_INIT 119 -#define FPGA_DONE 154 - -#define LCD_PWR 138 -#define LCD_PON_PIN 139 - -#if defined(CONFIG_VIDEO ) && !defined(CONFIG_SPL_BUILD ) -static struct { -u32 xres; -u32 yres; -} panel_resolution[] = { - {480 ,272 }, - {800 ,480 } -}; - -static struct panel_config lcd_cfg[] = { - { - .timing_h =PANEL_TIMING_H (40 ,5 ,2 ), - .timing_v =PANEL_TIMING_V (8 ,8 ,2 ), - .pol_freq =0x00003000 ,/* Pol Freq */ - .divisor =0x00010033 ,/* 9 Mhz Pixel Clock */ - .panel_type =0x01 ,/* TFT */ - .data_lines =0x03 ,/* 24 Bit RGB */ - .load_mode =0x02 ,/* Frame Mode */ - .panel_color =0 , - .gfx_format =GFXFORMAT_RGB24_UNPACKED , - }, - { - .timing_h =PANEL_TIMING_H (20 ,192 ,4 ), - .timing_v =PANEL_TIMING_V (2 ,20 ,10 ), - .pol_freq =0x00004000 ,/* Pol Freq */ - .divisor =0x0001000E ,/* 36Mhz Pixel Clock */ - .panel_type =0x01 ,/* TFT */ - .data_lines =0x03 ,/* 24 Bit RGB */ - .load_mode =0x02 ,/* Frame Mode */ - .panel_color =0 , - .gfx_format =GFXFORMAT_RGB24_UNPACKED , - } -}; -#endif - -/* Timing definitions for FPGA */ -static const u32 gpmc_fpga[] = { -FPGA_GPMC_CONFIG1 , -FPGA_GPMC_CONFIG2 , -FPGA_GPMC_CONFIG3 , -FPGA_GPMC_CONFIG4 , -FPGA_GPMC_CONFIG5 , -FPGA_GPMC_CONFIG6 , -}; - -#ifdef CONFIG_USB_EHCI_HCD -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0 ] =OMAP_EHCI_PORT_MODE_PHY , - .port_mode[1 ] =OMAP_EHCI_PORT_MODE_PHY , - .port_mode[2 ] =OMAP_USBHS_PORT_MODE_UNUSED , -}; - -int ehci_hcd_init (int index,enum usb_init_type init, -struct ehci_hccr **hccr,struct ehci_hcor **hcor) -{ -return omap_ehci_hcd_init (index, &usbhs_bdata, hccr, hcor); -} - -int ehci_hcd_stop (int index) -{ -return omap_ehci_hcd_stop (); -} -#endif - - -static inline void fpga_reset (int nassert) -{ -gpio_set_value (FPGA_RESET , !nassert); -} - -int fpga_pgm_fn (int nassert,int nflush,int cookie) -{ -debug ("%s:%d: FPGA PROGRAM " , __func__, __LINE__); - -gpio_set_value (FPGA_PROG , !nassert); - -return nassert; -} - -int fpga_init_fn (int cookie) -{ -return !gpio_get_value (FPGA_INIT ); -} - -int fpga_done_fn (int cookie) -{ -return gpio_get_value (FPGA_DONE ); -} - -int fpga_pre_config_fn (int cookie) -{ -debug ("%s:%d: FPGA pre-configuration\n" , __func__, __LINE__); - -/* Setting GPIOs for programming Mode */ -gpio_request (FPGA_RESET ,"FPGA_RESET" ); -gpio_direction_output (FPGA_RESET ,1 ); -gpio_request (FPGA_PROG ,"FPGA_PROG" ); -gpio_direction_output (FPGA_PROG ,1 ); -gpio_request (FPGA_CCLK ,"FPGA_CCLK" ); -gpio_direction_output (FPGA_CCLK ,1 ); -gpio_request (FPGA_DIN ,"FPGA_DIN" ); -gpio_direction_output (FPGA_DIN ,0 ); -gpio_request (FPGA_INIT ,"FPGA_INIT" ); -gpio_direction_input (FPGA_INIT ); -gpio_request (FPGA_DONE ,"FPGA_DONE" ); -gpio_direction_input (FPGA_DONE ); - -/* Be sure that signal are deasserted */ -gpio_set_value (FPGA_RESET ,1 ); -gpio_set_value (FPGA_PROG ,1 ); - -return 0 ; -} - -int fpga_post_config_fn (int cookie) -{ -debug ("%s:%d: FPGA post-configuration\n" , __func__, __LINE__); - -fpga_reset (true); -udelay (100 ); -fpga_reset (false); - -return 0 ; -} - -/* Write program to the FPGA */ -int fpga_wr_fn (int nassert_write,int flush,int cookie) -{ -gpio_set_value (FPGA_DIN , nassert_write); - -return nassert_write; -} - -int fpga_clk_fn (int assert_clk,int flush,int cookie) -{ -gpio_set_value (FPGA_CCLK , assert_clk); - -return assert_clk; -} - -xilinx_spartan3_slave_serial_fns mt_ventoux_fpga_fns = { - fpga_pre_config_fn, - fpga_pgm_fn, - fpga_clk_fn, - fpga_init_fn, - fpga_done_fn, - fpga_wr_fn, - fpga_post_config_fn, -}; - -xilinx_desc fpga =XILINX_XC6SLX4_DESC (slave_serial, - (void *)&mt_ventoux_fpga_fns,0 ); - -/* Initialize the FPGA */ -static void mt_ventoux_init_fpga (void ) -{ -fpga_pre_config_fn (0 ); - -/* Setting CS1 for FPGA access */ -enable_gpmc_cs_config (gpmc_fpga, &gpmc_cfg->cs[1 ], -FPGA_BASE_ADDR ,GPMC_SIZE_128M ); - -fpga_init (); -fpga_add (fpga_xilinx, &fpga); -} - -/* -* Routine: board_init -* Description: Early hardware init. -*/ -int board_init (void ) -{ -gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ - -/* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 ); - -mt_ventoux_init_fpga (); - -/* GPIO_140: speaker #mute */ -MUX_VAL (CP (MCBSP3_DX ), (IEN |PTU |EN |M4 )) - /* GPIO_141: Buzz Hi */ -MUX_VAL (CP (MCBSP3_DR ), (IEN |PTU |EN |M4 )) - - /* Turning off the buzzer */ -gpio_request (BUZZER ,"BUZZER_MUTE" ); -gpio_request (SPEAKER ,"SPEAKER" ); -gpio_direction_output (BUZZER ,0 ); -gpio_direction_output (SPEAKER ,0 ); - -/* Activate USB power */ -gpio_request (USB1_PWR ,"USB1_PWR" ); -gpio_request (USB2_PWR ,"USB2_PWR" ); -gpio_direction_output (USB1_PWR ,1 ); -gpio_direction_output (USB2_PWR ,1 ); - -return 0 ; -} - -#ifndef CONFIG_SPL_BUILD -int misc_init_r (void ) -{ -char *eth_addr; -struct tam3517_module_info info; -int ret; - -TAM3517_READ_EEPROM (&info, ret); -omap_die_id_display (); - -if (ret) -return 0 ; - eth_addr =env_get ("ethaddr" ); -if (!eth_addr) -TAM3517_READ_MAC_FROM_EEPROM (&info); - -TAM3517_PRINT_SOM_INFO (&info); -return 0 ; -} -#endif - -/* -* Routine: set_muxconf_regs -* Description: Setting up the configuration Mux registers specific to the -* hardware. Many pins need to be moved from protect to primary -* mode. -*/ -void set_muxconf_regs (void ) -{ -MUX_MT_VENTOUX (); -} - -/* -* Initializes on-chip ethernet controllers. -* to override, implement board_eth_init() -*/ -int board_eth_init (bd_t *bis) -{ -davinci_emac_initialize (); -return 0 ; -} - -#if defined(CONFIG_MMC_OMAP_HS ) && \ - !defined(CONFIG_SPL_BUILD ) -int board_mmc_init (bd_t *bis) -{ -return omap_mmc_init (0 ,0 ,0 ,-1 ,-1 ); -} -#endif - -#if defined(CONFIG_VIDEO ) && !defined(CONFIG_SPL_BUILD ) -int board_video_init (void ) -{ -struct prcm *prcm_base = (struct prcm *)PRCM_BASE ; -struct panel_config *panel = &lcd_cfg[0 ]; -char *s; -u32 index =0 ; - -void *fb; - - fb = (void *)0x88000000 ; - - s =env_get ("panel" ); -if (s) { - index =simple_strtoul (s,NULL ,10 ); -if (index <ARRAY_SIZE (lcd_cfg)) - panel = &lcd_cfg[index]; -else -return 0 ; - } - - panel->frame_buffer = fb; -printf ("Panel: %dx%d\n" , panel_resolution[index].xres, - panel_resolution[index].yres); - panel->lcd_size = (panel_resolution[index].yres -1 ) <<16 | - (panel_resolution[index].xres -1 ); - -gpio_request (LCD_PWR ,"LCD Power" ); -gpio_request (LCD_PON_PIN ,"LCD Pon" ); -gpio_direction_output (LCD_PWR ,0 ); -gpio_direction_output (LCD_PON_PIN ,1 ); - - -setbits_le32 (&prcm_base->fclken_dss,FCK_DSS_ON ); -setbits_le32 (&prcm_base->iclken_dss,ICK_DSS_ON ); - -omap3_dss_panel_config (panel); -omap3_dss_enable (); - -return 0 ; -} -#endif board/teejet/mt_ventoux/mt_ventoux.h deleted +0
-403@@ -1,403 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Stefano Babic <[email protected]> -* -* Author: Hardy Weng <[email protected]> -* -* Copyright (C) 2010 TechNexion Ltd. -*/ - -#ifndef _MT_VENTOUX_H_ -#define _MT_VENTOUX_H_ - -const omap3_sysinfo sysinfo = { -DDR_DISCRETE , -"Teejet MT_VENTOUX Board" , -"NAND" , -}; - -/* FPGA CS1 configuration */ -#define FPGA_GPMC_CONFIG1 0x00001200 -#define FPGA_GPMC_CONFIG2 0x00161f00 -#define FPGA_GPMC_CONFIG3 0x00040400 -#define FPGA_GPMC_CONFIG4 0x120c1f08 -#define FPGA_GPMC_CONFIG5 0x001e161f -#define FPGA_GPMC_CONFIG6 0x96080fcf - -#define FPGA_BASE_ADDR 0x20000000 - -/* -* IEN - Input Enable -* IDIS - Input Disable -* PTD - Pull type Down -* PTU - Pull type Up -* DIS - Pull type selection is inactive -* EN - Pull type selection is active -* M0 - Mode 0 -* The commented string gives the final mux configuration for that pin -*/ -#define MUX_MT_VENTOUX () \ -/* SDRC */ \ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_CKE0), (M0)) \ - MUX_VAL(CP(SDRC_CKE1), (M0)) \ - MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \ -/* GPMC */ \ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTD | EN | M4))/* GPIO 53 */\ - MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /* GPIO 54 */\ -MUX_VAL (CP (GPMC_NCS4 ), (IEN |PTD |EN |M4 )) \ - /* GPIO 55 : NFS */\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_NCS6), (IDIS | PTD | EN | M3)) /*PWM11*/ \ - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | EN | M4)) /*GPIO_58*/ \ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (GPMC_NWP ), (IEN |PTD |DIS |M4 )) \ - /*GPIO_62: FPGA_RESET */ \ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \ -MUX_VAL (CP (GPMC_WAIT2 ), (IEN |PTU |EN |M4 )) \ - /* GPIO_64*/ \ -MUX_VAL (CP (GPMC_WAIT3 ), (IEN |PTU |EN |M4 )) \ - /* DSS */\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ -MUX_VAL (CP (DSS_DATA23 ), (IDIS |PTD |DIS |M0 )) \ - /* CAMERA */\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (CSI2_DY1 ), (IEN |PTD |DIS |M0 )) \ - /* MMC */\ - MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \ -MUX_VAL (CP (MMC1_DAT4 ), (IEN |PTU |EN |M4 )) \ - /* GPIO_126: CardDetect */\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ -MUX_VAL (CP (MMC1_DAT6 ), (IEN |PTU |EN |M4 )) \ - /*GPIO_128 */ \ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ - \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) \ - MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \ -MUX_VAL (CP (MMC2_DAT6 ), (IDIS |PTU |EN |M4 )) \ - /* GPIO_138: LCD_ENVD */\ -MUX_VAL (CP (MMC2_DAT7 ), (IDIS |PTD |EN |M4 )) \ -/* GPIO_139: LCD_PON */ \ - /* McBSP */\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \ - \ -MUX_VAL (CP (MCBSP2_FSX ), (IEN |PTD |EN |M4 )) \ - /* GPIO_116: FPGA_PROG */ \ -MUX_VAL (CP (MCBSP2_CLKX ), (IEN |PTD |EN |M4 )) \ - /* GPIO_117: FPGA_CCLK */ \ -MUX_VAL (CP (MCBSP2_DR ), (IEN |PTD |EN |M4 )) \ - /* GPIO_118: FPGA_DIN */ \ -MUX_VAL (CP (MCBSP2_DX ), (IEN |PTD |EN |M4 )) \ - /* GPIO_119: FPGA_INIT */ \ - \ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \ - \ -MUX_VAL (CP (MCBSP4_CLKX ), (IEN |PTD |DIS |M4 )) \ - /*GPIO_152: Ignition Sense */ \ -MUX_VAL (CP (MCBSP4_DR ), (IEN |PTD |DIS |M4 )) \ - /*GPIO_153: Power Button Sense */ \ -MUX_VAL (CP (MCBSP4_DX ), (IEN |PTU |DIS |M4 )) \ - /* GPIO_154: FPGA_DONE */ \ -MUX_VAL (CP (MCBSP4_FSX ), (IEN |PTD |DIS |M4 )) \ -/* GPIO_155: CA8_irq */ \ - /* UART */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \ -MUX_VAL (CP (UART1_RTS ), (IEN |PTU |EN |M4 )) \ - /* GPIO_149: USB status 2 */\ -MUX_VAL (CP (UART1_CTS ), (IEN |PTU |EN |M4 )) \ - /* GPIO_150: USB status 1 */\ - \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (UART2_CTS ), (IEN |PTU |EN |M2 )) \ - /* gpt9_pwm */\ -MUX_VAL (CP (UART2_RTS ), (IEN |PTD |DIS |M2 )) \ - /* gpt10_pwm */\ -MUX_VAL (CP (UART2_TX ), (IEN |PTD |DIS |M2 )) \ - /* gpt8_pwm */\ -MUX_VAL (CP (UART2_RX ), (IEN |PTD |DIS |M2 )) \ - /* gpt11_pwm */\ - \ -MUX_VAL (CP (UART3_CTS_RCTX ), (IDIS |PTD |DIS |M4 )) \ - /*GPIO_163 : TS_PENIRQ*/ \ -MUX_VAL (CP (UART3_RTS_SD ), (IEN |PTD |DIS |M4 )) \ - /*GPIO_164 : MMC */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (UART3_TX_IRTX ), (IDIS |PTD |DIS |M0 )) \ - /* I2C */\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (I2C4_SDA ), (IEN |PTU |EN |M0 )) \ - /* McSPI */\ - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ - MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M4)) /*GPIO_176*/\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M4)) \ - \ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ -MUX_VAL (CP (MCSPI2_CS1 ), (IEN |PTD |EN |M0 )) \ - /* CCDC */\ -MUX_VAL (CP (CCDC_PCLK ), (IEN |PTU |EN |M4 )) \ - /* GPIO94 */\ -MUX_VAL (CP (CCDC_FIELD ), (IEN |PTD |DIS |M4 )) \ - /* GPIO95: #Enable Output */\ - MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M4)) \ -MUX_VAL (CP (CCDC_WEN ), (IEN |PTD |DIS |M4 )) \ - /* GPIO 99: #SOM_PWR_OFF */\ - MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M4)) \ -MUX_VAL (CP (CCDC_DATA1 ), (IEN |PTD |DIS |M4 )) \ - /* GPIO_100: #power out */\ - MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M4)) \ -MUX_VAL (CP (CCDC_DATA3 ), (IEN |PTD |DIS |M4 )) \ - /* GPIO_102 */\ - MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M4)) \ - MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M4)) \ - MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M4)) \ -MUX_VAL (CP (CCDC_DATA7 ), (IEN |PTD |DIS |M4 )) \ - /* RMII */\ - MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ - MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ - MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \ - MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \ - MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \ - MUX_VAL(CP(RMII_RXER), (PTD | M0)) \ - MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \ - MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \ - MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ -MUX_VAL (CP (RMII_50MHZ_CLK ), (IEN |PTD |EN |M0 )) \ - /* HECC */\ - MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (HECC1_RXD ), (IEN |PTU |EN |M0 )) \ - /* HSUSB */\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (USB0_DRVBUS ), (IEN |PTD |EN |M0 )) \ - /* HDQ */\ -MUX_VAL (CP (HDQ_SIO ), (IEN |PTD |EN |M4 )) \ -/* GPIO_170: auto update */ \ - /* Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (SYS_NRESWARM ), (IDIS |PTU |DIS |M4 )) \ - /* - GPIO30 */\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ - MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ - \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (SYS_CLKOUT1 ), (IDIS |PTD |DIS |M4 )) \ - /* gpio_10 */\ -MUX_VAL (CP (SYS_CLKOUT2 ), (IEN |PTU |EN |M0 )) \ - /* JTAG */\ - MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_EMU0), (IDIS | PTD | EN | M4)) /*GPIO_11*/ \ -MUX_VAL (CP (JTAG_EMU1 ), (IDIS |PTD |EN |M4 ))/*GPIO_31*/ \ - /* ETK (ES2 onwards) */\ -MUX_VAL (CP (ETK_CLK_ES2 ), (IDIS |PTD |DIS |M3 )) \ - /* hsusb1_stp */ \ -MUX_VAL (CP (ETK_CTL_ES2 ), (IDIS |PTD |DIS |M3 )) \ - /* hsusb1_clk */\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \ -MUX_VAL (CP (ETK_D10_ES2 ), (IDIS |PTD |EN |M4 )) \ - /* gpio_24 */\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \ -MUX_VAL (CP (ETK_D12_ES2 ), (IEN |PTD |DIS |M4 )) \ - /* gpio_26 */\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) \ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \ -MUX_VAL (CP (ETK_D15_ES2 ), (IEN |PTD |DIS |M4 )) \ -/* gpio_29 */ \ - /* Die to Die */\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \ - -#endif configs/mt_ventoux_defconfig deleted +0
-54@@ -1,54 +0,0 @@ -CONFIG_ARM=y -# CONFIG_SYS_THUMB_BUILD is not set -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_TEXT_BASE=0x80008000 -CONFIG_TARGET_MT_VENTOUX=y -CONFIG_EMIF4=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_SPL=y -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SPL_TEXT_BASE=0x40200000 -# CONFIG_SPL_FS_EXT4 is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="mt_ventoux => " -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),8m(ubisystem),-(rootfs)" -CONFIG_CMD_UBI=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_SPARTAN3=y -CONFIG_SYS_OMAP24_I2C_SPEED=400000 -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_MII=y -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_ULPI_VIEWPORT_OMAP=y -CONFIG_USB_ULPI=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO_OMAP3=y -CONFIG_VIDEO=y -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=yinclude/configs/mt_ventoux.h deleted +0
-46@@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de. -* -* -* Configuration settings for the Teejet mt_ventoux board. -* -* Copyright (C) 2009 TechNexion Ltd. -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "tam3517-common.h" - -#undef CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \ - 6 * 1024 * 1024) - -#define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX - -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_HOSTNAME "mt_ventoux" - -/* -* Set its own mtdparts, different from common -*/ - -/* -* FPGA -*/ -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_WAIT 10000 -#define CONFIG_MAX_FPGA_DEVICES 1 -#define CONFIG_FPGA_DELAY () udelay(1) -#define CONFIG_SYS_FPGA_PROG_FEEDBACK - -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_BMP_RLE8 - -#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ - "bootcmd=run net_nfs\0" - -#endif /* __CONFIG_H */
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 6/8 mt_ventoux: remove board
In reply to Bartosz GolaszewskiQuoted 9 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>Acked-by Stefano Babic <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/35a3968c/attachment.sig>
PATCH 7/8 twister: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-omap2/omap3/Kconfig | 6 - board/technexion/twister/Kconfig | 12 - board/technexion/twister/MAINTAINERS | 6 - board/technexion/twister/Makefile | 7 - board/technexion/twister/twister.c | 160 ----------- board/technexion/twister/twister.h | 400 --------------------------- configs/twister_defconfig | 52 ---- include/configs/twister.h | 34 --- 9 files changed, 678 deletions(-) delete mode 100644 board/technexion/twister/Kconfig delete mode 100644 board/technexion/twister/MAINTAINERS delete mode 100644 board/technexion/twister/Makefile delete mode 100644 board/technexion/twister/twister.c delete mode 100644 board/technexion/twister/twister.h delete mode 100644 configs/twister_defconfig delete mode 100644 include/configs/twister.h
arch/arm/include/asm/mach-types.h +0 -1
@@ -629,7 +629,6 @@#define MACH_TYPE_ECIA 623#define MACH_TYPE_CM4008 624#define MACH_TYPE_P2001 625 -#define MACH_TYPE_TWISTER 626#define MACH_TYPE_MUDSHARK 627#define MACH_TYPE_HB2 628#define MACH_TYPE_IQ80332 629
arch/arm/mach-omap2/omap3/Kconfig +0 -6
@@ -133,11 +133,6 @@ config TARGET_TAO3530 select OMAP3_GPIO_5 select OMAP3_GPIO_6 -config TARGET_TWISTER - bool "Twister" - select OMAP3_GPIO_2 - select OMAP3_GPIO_5 if USB_EHCI_HCD - config TARGET_OMAP3_CAIRO bool "QUIPOS CAIRO" select DM
@@ -198,7 +193,6 @@ source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" -source "board/technexion/twister/Kconfig" source "board/quipos/cairo/Kconfig" source "board/lg/sniper/Kconfig"
board/technexion/twister/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_TWISTER - -config SYS_BOARD - default "twister" - -config SYS_VENDOR - default "technexion" - -config SYS_CONFIG_NAME - default "twister" - -endif
board/technexion/twister/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -TWISTER BOARD -M: Stefano Babic <[email protected]> -S: Maintained -F: board/technexion/twister/ -F: include/configs/twister.h -F: configs/twister_defconfig
board/technexion/twister/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Ilya Yanok, Emcraft Systems -# -# Based on ti/evm/Makefile - -obj-y := twister.o
board/technexion/twister/twister.c deleted +0 -160
160 lines not on this page · raw message
board/technexion/twister/twister.h deleted +0 -400
400 lines not on this page · raw message
configs/twister_defconfig deleted +0 -52
52 lines not on this page · raw message
include/configs/twister.h deleted +0 -34
@@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de. -* -* Copyright (C) 2009 TechNexion Ltd. -* -* Configuration for the Technexion twister board. -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "tam3517-common.h" - -#define CONFIG_MACH_TYPE MACH_TYPE_TAM3517 - -#define CONFIG_TAM3517_SW3_SETTINGS -#define CONFIG_XR16L2751 - - -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_HOSTNAME "twister" - -#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ - "bootcmd=run nandboot\0" - -/* SPL OS boot options */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 - -#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) - -#endif /* __CONFIG_H */
Signature · 1 line
2.21.0
PATCH 7/8 twister: remove board
Hi Bartosz,
Quoted 7 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
Yes, correct, and I have not a working board anymore.
Best regards,
Stefano Babic
Quoted 770 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-omap2/omap3/Kconfig | 6 - board/technexion/twister/Kconfig | 12 - board/technexion/twister/MAINTAINERS | 6 - board/technexion/twister/Makefile | 7 - board/technexion/twister/twister.c | 160 ----------- board/technexion/twister/twister.h | 400 --------------------------- configs/twister_defconfig | 52 ---- include/configs/twister.h | 34 --- 9 files changed, 678 deletions(-) delete mode 100644 board/technexion/twister/Kconfig delete mode 100644 board/technexion/twister/MAINTAINERS delete mode 100644 board/technexion/twister/Makefile delete mode 100644 board/technexion/twister/twister.c delete mode 100644 board/technexion/twister/twister.h delete mode 100644 configs/twister_defconfig delete mode 100644 include/configs/twister.harch/arm/include/asm/mach-types.h +0
-1@@ -629,7 +629,6 @@#define MACH_TYPE_ECIA 623#define MACH_TYPE_CM4008 624#define MACH_TYPE_P2001 625 -#define MACH_TYPE_TWISTER 626#define MACH_TYPE_MUDSHARK 627#define MACH_TYPE_HB2 628#define MACH_TYPE_IQ80332 629arch/arm/mach-omap2/omap3/Kconfig +0
-6@@ -133,11 +133,6 @@ config TARGET_TAO3530 select OMAP3_GPIO_5 select OMAP3_GPIO_6 -config TARGET_TWISTER - bool "Twister" - select OMAP3_GPIO_2 - select OMAP3_GPIO_5 if USB_EHCI_HCD - config TARGET_OMAP3_CAIRO bool "QUIPOS CAIRO" select DM@@ -198,7 +193,6 @@ source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" -source "board/technexion/twister/Kconfig" source "board/quipos/cairo/Kconfig" source "board/lg/sniper/Kconfig"board/technexion/twister/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_TWISTER - -config SYS_BOARD - default "twister" - -config SYS_VENDOR - default "technexion" - -config SYS_CONFIG_NAME - default "twister" - -endifboard/technexion/twister/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -TWISTER BOARD -M: Stefano Babic <[email protected]> -S: Maintained -F: board/technexion/twister/ -F: include/configs/twister.h -F: configs/twister_defconfigboard/technexion/twister/Makefile deleted +0
-7@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Ilya Yanok, Emcraft Systems -# -# Based on ti/evm/Makefile - -obj-y := twister.oboard/technexion/twister/twister.c deleted +0
-160@@ -1,160 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2011 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de. -* -* Copyright (C) 2009 TechNexion Ltd. -*/ - -#include <common.h> -#include <netdev.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/omap_gpio.h> -#include <asm/arch/mmc_host_def.h> -#include <i2c.h> -#include <spl.h> -#include <mmc.h> -#include <asm/gpio.h> -#include <usb.h> -#include <asm/ehci-omap.h> -#include "twister.h" - -DECLARE_GLOBAL_DATA_PTR ; - -/* Timing definitions for Ethernet Controller */ -static const u32 gpmc_smc911[] = { -NET_GPMC_CONFIG1 , -NET_GPMC_CONFIG2 , -NET_GPMC_CONFIG3 , -NET_GPMC_CONFIG4 , -NET_GPMC_CONFIG5 , -NET_GPMC_CONFIG6 , -}; - -static const u32 gpmc_XR16L2751[] = { -XR16L2751_GPMC_CONFIG1 , -XR16L2751_GPMC_CONFIG2 , -XR16L2751_GPMC_CONFIG3 , -XR16L2751_GPMC_CONFIG4 , -XR16L2751_GPMC_CONFIG5 , -XR16L2751_GPMC_CONFIG6 , -}; - -#ifdef CONFIG_USB_EHCI_OMAP -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0 ] =OMAP_EHCI_PORT_MODE_PHY , - .port_mode[1 ] =OMAP_EHCI_PORT_MODE_PHY , - .port_mode[2 ] =OMAP_USBHS_PORT_MODE_UNUSED , -}; - -int ehci_hcd_init (int index,enum usb_init_type init, -struct ehci_hccr **hccr,struct ehci_hcor **hcor) -{ -return omap_ehci_hcd_init (index, &usbhs_bdata, hccr, hcor); -} - -int ehci_hcd_stop (int index) -{ -return omap_ehci_hcd_stop (); -} -#endif - -int board_init (void ) -{ -gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ - -/* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 ); - -/* Chip select 1 and 3 are used for XR16L2751 UART controller */ -enable_gpmc_cs_config (gpmc_XR16L2751, &gpmc_cfg->cs[1 ], -XR16L2751_UART1_BASE ,GPMC_SIZE_16M ); - -enable_gpmc_cs_config (gpmc_XR16L2751, &gpmc_cfg->cs[3 ], -XR16L2751_UART2_BASE ,GPMC_SIZE_16M ); - -gpio_request (CONFIG_OMAP_EHCI_PHY1_RESET_GPIO ,"USB_PHY1_RESET" ); -gpio_direction_output (CONFIG_OMAP_EHCI_PHY1_RESET_GPIO ,1 ); - -return 0 ; -} - -#ifndef CONFIG_SPL_BUILD -int misc_init_r (void ) -{ -char *eth_addr; -struct tam3517_module_info info; -int ret; - -omap_die_id_display (); - - eth_addr =env_get ("ethaddr" ); -if (eth_addr) -return 0 ; - -TAM3517_READ_EEPROM (&info, ret); -if (!ret) -TAM3517_READ_MAC_FROM_EEPROM (&info); - -return 0 ; -} -#endif - -/* -* Routine: set_muxconf_regs -* Description: Setting up the configuration Mux registers specific to the -* hardware. Many pins need to be moved from protect to primary -* mode. -*/ -void set_muxconf_regs (void ) -{ -MUX_TWISTER (); -} - -int board_eth_init (bd_t *bis) -{ -#ifdef CONFIG_DRIVER_TI_EMAC -davinci_emac_initialize (); -#endif -/* init cs for extern lan */ -enable_gpmc_cs_config (gpmc_smc911, &gpmc_cfg->cs[5 ], -CONFIG_SMC911X_BASE ,GPMC_SIZE_16M ); -#ifdef CONFIG_SMC911X -return smc911x_initialize (0 ,CONFIG_SMC911X_BASE ); -#else -return 0 ; -#endif -} - -#if defined(CONFIG_MMC_OMAP_HS ) -int board_mmc_init (bd_t *bis) -{ -return omap_mmc_init (0 ,0 ,0 ,-1 ,-1 ); -} -#endif - -#ifdef CONFIG_SPL_OS_BOOT -/* -* Do board specific preparation before SPL -* Linux boot -*/ -void spl_board_prepare_for_linux (void ) -{ -/* init cs for extern lan */ -enable_gpmc_cs_config (gpmc_smc911, &gpmc_cfg->cs[5 ], -CONFIG_SMC911X_BASE ,GPMC_SIZE_16M ); -} -int spl_start_uboot (void ) -{ -int val =0 ; -if (!gpio_request (SPL_OS_BOOT_KEY ,"U-Boot key" )) { -gpio_direction_input (SPL_OS_BOOT_KEY ); - val =gpio_get_value (SPL_OS_BOOT_KEY ); -gpio_free (SPL_OS_BOOT_KEY ); - } -return val; -} -#endif board/technexion/twister/twister.h deleted +0
-400@@ -1,400 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de. -* -* Copyright (C) 2010 TechNexion Ltd. -*/ - -#ifndef _TAM3517_H_ -#define _TAM3517_H_ - -const omap3_sysinfo sysinfo = { -DDR_DISCRETE , -"TAM3517 TWISTER Board" , -"NAND" , -}; - -#define XR16L2751_GPMC_CONFIG1 0x00000000 -#define XR16L2751_GPMC_CONFIG2 0x001e1e01 -#define XR16L2751_GPMC_CONFIG3 0x00080300 -#define XR16L2751_GPMC_CONFIG4 0x1c091c09 -#define XR16L2751_GPMC_CONFIG5 0x04181f1f -#define XR16L2751_GPMC_CONFIG6 0x00000FCF - -#define XR16L2751_UART1_BASE 0x21000000 -#define XR16L2751_UART2_BASE 0x23000000 - -/* GPIO used to select between U-Boot and kernel */ -#define SPL_OS_BOOT_KEY 55 - -/* -* IEN - Input Enable -* IDIS - Input Disable -* PTD - Pull type Down -* PTU - Pull type Up -* DIS - Pull type selection is inactive -* EN - Pull type selection is active -* M0 - Mode 0 -* The commented string gives the final mux configuration for that pin -*/ -#define MUX_TWISTER () \ -/* SDRC */ \ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SDRC_CKE0), (M0)) \ - MUX_VAL(CP(SDRC_CKE1), (M0)) \ - MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \ -/*sdrc_strben_dly0*/ \ -MUX_VAL (CP (STRBEN_DLY1 ), (IEN |PTD |EN |M0 )) \ -/*sdrc_strben_dly1*/ \ - /* GPMC */\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTD | EN | M2)) /*PWM9*/\ - MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS4), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NCS6), (IDIS | PTD | EN | M3)) /*PWM11*/ \ - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | EN | M4)) /*GPIO_58*/ \ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ -MUX_VAL (CP (GPMC_WAIT3 ), (IEN |PTU |EN |M4 )) \ - /* DSS */\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ -MUX_VAL (CP (DSS_DATA23 ), (IDIS |PTD |DIS |M0 )) \ - /* CAMERA */\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (CSI2_DY1 ), (IEN |PTD |DIS |M0 )) \ - /* MMC */\ - MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \ -MUX_VAL (CP (MMC1_DAT4 ), (IEN |PTU |EN |M4 )) \ - /* CardDetect */\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ - \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) \ - MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \ - MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \ -MUX_VAL (CP (MMC2_DAT7 ), (IDIS |PTU |EN |M4 )) \ - /* McBSP */\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \ - \ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | EN | M4)) /*GPIO_116*/ \ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \ - \ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \ - \ - MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_152*/\ - MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\ - MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\ -MUX_VAL (CP (MCBSP4_FSX ), (IEN |PTD |DIS |M4 ))/*GPIO_155*/ \ - /* UART */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART1_RTS), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) \ - \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ - \ - MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) /*GPIO_163*/ \ - MUX_VAL(CP(UART3_RTS_SD), (IEN | PTD | DIS | M4)) /*GPIO_164*/\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (UART3_TX_IRTX ), (IDIS |PTD |DIS |M0 )) \ - /* I2C */\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (I2C4_SDA ), (IEN |PTU |EN |M0 )) \ - /* McSPI */\ - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ - MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M4)) /*GPIO_176*/\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M4)) \ - \ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ -MUX_VAL (CP (MCSPI2_CS1 ), (IEN |PTD |EN |M4 )) \ - /* CCDC */\ - MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \ - MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \ - MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (CCDC_DATA7 ), (IEN |PTD |DIS |M0 )) \ - /* RMII */\ - MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ - MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ - MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \ - MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \ - MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \ - MUX_VAL(CP(RMII_RXER), (PTD | M0)) \ - MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \ - MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \ - MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ -MUX_VAL (CP (RMII_50MHZ_CLK ), (IEN |PTD |EN |M0 )) \ - /* HECC */\ - MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (HECC1_RXD ), (IEN |PTU |EN |M0 )) \ - /* HSUSB */\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTU | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (USB0_DRVBUS ), (IEN |PTD |EN |M0 )) \ - /* HDQ */\ -MUX_VAL (CP (HDQ_SIO ), (IEN |PTD |EN |M4 )) \ - /* Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \ -MUX_VAL (CP (SYS_NRESWARM ), (IDIS |PTU |DIS |M4 )) \ - /* - GPIO30 */\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ -MUX_VAL (CP (SYS_BOOT6 ), (IDIS |PTD |DIS |M4 ))/*GPIO_8*/ \ - /* - VIO_1V8*/\ - MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ - \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ -MUX_VAL (CP (SYS_CLKOUT2 ), (IEN |PTU |EN |M0 )) \ - /* JTAG */\ - MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(JTAG_EMU0), (IDIS | PTD | EN | M4)) /*GPIO_11*/ \ -MUX_VAL (CP (JTAG_EMU1 ), (IDIS |PTD |EN |M4 ))/*GPIO_31*/ \ - /* ETK (ES2 onwards) */\ -MUX_VAL (CP (ETK_CLK_ES2 ), (IDIS |PTD |DIS |M3 )) \ - /* hsusb1_stp */ \ -MUX_VAL (CP (ETK_CTL_ES2 ), (IDIS |PTD |DIS |M3 )) \ - /* hsusb1_clk */\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M3)) \ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \ -MUX_VAL (CP (ETK_D8_ES2 ), (IEN |PTD |EN |M3 )) \ - /* hsusb1_dir */\ -MUX_VAL (CP (ETK_D9_ES2 ), (IEN |PTD |EN |M3 )) \ - /* hsusb1_nxt */\ - MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M4)) \ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \ -MUX_VAL (CP (ETK_D15_ES2 ), (IEN |PTD |DIS |M4 )) \ - /* Die to Die */\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \ - -#endif configs/twister_defconfig deleted +0
-52@@ -1,52 +0,0 @@ -CONFIG_ARM=y -# CONFIG_SYS_THUMB_BUILD is not set -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_TEXT_BASE=0x80008000 -CONFIG_TARGET_TWISTER=y -CONFIG_EMIF4=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_SPL=y -CONFIG_BOOTDELAY=10 -CONFIG_SPL_TEXT_BASE=0x40200000 -# CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="twister => " -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00800000 -CONFIG_CMD_SPL_WRITE_SIZE=0x400 -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),-(rootfs)" -CONFIG_CMD_UBI=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_OMAP24_I2C_SPEED=400000 -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_MII=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0x2C000000 -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_ULPI_VIEWPORT_OMAP=y -CONFIG_USB_ULPI=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=yinclude/configs/twister.h deleted +0
-34@@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 -* Stefano Babic, DENX Software Engineering, sbabic at denx.de. -* -* Copyright (C) 2009 TechNexion Ltd. -* -* Configuration for the Technexion twister board. -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "tam3517-common.h" - -#define CONFIG_MACH_TYPE MACH_TYPE_TAM3517 - -#define CONFIG_TAM3517_SW3_SETTINGS -#define CONFIG_XR16L2751 - - -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_HOSTNAME "twister" - -#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ - "bootcmd=run nandboot\0" - -/* SPL OS boot options */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 - -#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) - -#endif /* __CONFIG_H */
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 7/8 twister: remove board
In reply to Bartosz GolaszewskiQuoted 9 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>Acked-by Stefano Babic <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/1c888e14/attachment.sig>
PATCH 8/8 mcx: remove board
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.
--- arch/arm/include/asm/mach-types.h | 1 - arch/arm/mach-omap2/omap3/Kconfig | 7 - board/htkw/mcx/Kconfig | 12 - board/htkw/mcx/MAINTAINERS | 6 - board/htkw/mcx/Makefile | 7 - board/htkw/mcx/mcx.c | 141 ----------- board/htkw/mcx/mcx.h | 400 ------------------------------ configs/mcx_defconfig | 58 ----- include/configs/mcx.h | 294 ---------------------- 9 files changed, 926 deletions(-) delete mode 100644 board/htkw/mcx/Kconfig delete mode 100644 board/htkw/mcx/MAINTAINERS delete mode 100644 board/htkw/mcx/Makefile delete mode 100644 board/htkw/mcx/mcx.c delete mode 100644 board/htkw/mcx/mcx.h delete mode 100644 configs/mcx_defconfig delete mode 100644 include/configs/mcx.h
arch/arm/include/asm/mach-types.h +0 -1
@@ -3596,7 +3596,6 @@#define MACH_TYPE_TAISHAN 3653#define MACH_TYPE_TOUCHLINK 3654#define MACH_TYPE_STM32F103ZE 3655 -#define MACH_TYPE_MCX 3656#define MACH_TYPE_STM_NMHDK_FLI7610 3657#define MACH_TYPE_TOP28X 3658#define MACH_TYPE_OKL4VP_MICROVISOR 3659
arch/arm/mach-omap2/omap3/Kconfig +0 -7
@@ -105,12 +105,6 @@ config TARGET_TRICORDER bool "Tricorder" select OMAP3_GPIO_2 -config TARGET_MCX - bool "MCX" - select BOARD_LATE_INIT - select OMAP3_GPIO_2 if USB_EHCI_HCD - select OMAP3_GPIO_5 if USB_EHCI_HCD - config TARGET_OMAP3_LOGIC bool "OMAP3 Logic" select BOARD_LATE_INIT
@@ -189,7 +183,6 @@ source "board/logicpd/zoom1/Kconfig" source "board/ti/am3517crane/Kconfig" source "board/pandora/Kconfig" source "board/corscience/tricorder/Kconfig" -source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig"
board/htkw/mcx/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MCX - -config SYS_BOARD - default "mcx" - -config SYS_VENDOR - default "htkw" - -config SYS_CONFIG_NAME - default "mcx" - -endif
board/htkw/mcx/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MCX BOARD -M: Anatolij Gustschin <[email protected]> -S: Maintained -F: board/htkw/mcx/ -F: include/configs/mcx.h -F: configs/mcx_defconfig
board/htkw/mcx/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Ilya Yanok, Emcraft Systems -# -# Based on ti/evm/Makefile - -obj-y := mcx.o
board/htkw/mcx/mcx.c deleted +0 -141
141 lines not on this page · raw message
board/htkw/mcx/mcx.h deleted +0 -400
400 lines not on this page · raw message
configs/mcx_defconfig deleted +0 -58
58 lines not on this page · raw message
include/configs/mcx.h deleted +0 -294
294 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 8/8 mcx: remove board
Quoted 8 lines · On Fri, 17 May 2019 11:17:20 +0200 Bartosz Golaszewski brgl at bgdev.pl wrote:
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>
I do not have this board any more, so
--
Anatolij
PATCH 8/8 mcx: remove board
In reply to Bartosz GolaszewskiQuoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
This board still doesn't select
CONFIG_DMand seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it.Signed-off-by Bartosz Golaszewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/89555ea1/attachment.sig>