nbd: block/dev size changes
Subsystems (2)
cover nbd: block/dev size changes
This is just Xiubo's zero blksize patch from here:
https://marc.info/?l=linux-kernel&m=155893597828674&w=2
and my resize patch.
Xiubo's zero blksize patch and my resize patch conflicted, so I fixed the issue mentioned in the link so his patch does "goto out" instead of returning while holding resources, and rebuilt my patch over his. I also fixed a issue in my resize patch so we only call nbd_size_set if a value has changed.
PATCH 1/2 nbd: fix crash when the blksize is zero v2
From: Xiubo Li <[email protected]>
This will allow the blksize to be set zero and then use 1024 as default.
---
V2:
- Fix error handling in genl_connect.
drivers/block/nbd.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/block/nbd.c +20 -3
@@ -135,6 +135,8 @@ static struct dentry *nbd_dbg_dir;#define NBD_MAGIC 0x68797548 +#define NBD_DEF_BLKSIZE 1024 +static unsigned int nbds_max =16 ;static int max_part =16 ;static struct workqueue_struct *recv_workqueue;
@@ -1237,6 +1239,14 @@ static void nbd_clear_sock_ioctl(struct nbd_device *nbd,nbd_config_put (nbd); } +static bool nbd_is_valid_blksize (unsigned long blksize) +{ +if (!blksize || !is_power_of_2 (blksize) || blksize <512 || + blksize >PAGE_SIZE ) +return false; +return true; +} +/* Must be called with config_lock held */ static int __nbd_ioctl (struct block_device *bdev,struct nbd_device *nbd,unsigned int cmd,unsigned long arg)
@@ -1252,8 +1262,9 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd,case NBD_SET_SOCK :return nbd_add_socket (nbd, arg, false);case NBD_SET_BLKSIZE : -if (!arg || !is_power_of_2 (arg) || arg <512 || - arg >PAGE_SIZE ) +if (!arg) + arg =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (arg))return -EINVAL ;nbd_size_set (nbd, arg,div_s64 (config->bytesize, arg));
@@ -1333,7 +1344,7 @@ static struct nbd_config *nbd_alloc_config(void)atomic_set (&config->recv_threads,0 );init_waitqueue_head (&config->recv_wq);init_waitqueue_head (&config->conn_wait); - config->blksize =1024 ; + config->blksize =NBD_DEF_BLKSIZE ;atomic_set (&config->live_connections,0 );try_module_get (THIS_MODULE );return config;
@@ -1769,6 +1780,12 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) {u64 bsize =nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]); +if (!bsize) + bsize =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (bsize)) { + ret = -EINVAL ; + goto out; + }nbd_size_set (nbd, bsize,div64_u64 (config->bytesize, bsize)); }if (info->attrs[NBD_ATTR_TIMEOUT ]) {
Signature · 1 line
2.21.0
Re: [PATCH 1/2] nbd: fix crash when the blksize is zero v2
Quoted 5 lines · Mike Christie
From: Xiubo Li <[email protected]>
This will allow the blksize to be set zero and then use 1024 as default.
Quoted 7 lines
Signed-off-by Xiubo Li <[email protected]>[fix to use goto out instead of return in genl_connect]Signed-off-by Mike Christie <[email protected]>---
V2:
- Fix error handling ingenl_connect.
This change looks good to me.
Thanks.
BRs
Xiubo
Quoted 65 lines
drivers/block/nbd.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)drivers/block/nbd.c +20
-3@@ -135,6 +135,8 @@ static struct dentry *nbd_dbg_dir;#define NBD_MAGIC 0x68797548 +#define NBD_DEF_BLKSIZE 1024 +static unsigned int nbds_max =16 ;static int max_part =16 ;static struct workqueue_struct *recv_workqueue;@@ -1237,6 +1239,14 @@ static void nbd_clear_sock_ioctl(struct nbd_device *nbd,nbd_config_put (nbd); } +static bool nbd_is_valid_blksize (unsigned long blksize) +{ +if (!blksize || !is_power_of_2 (blksize) || blksize <512 || + blksize >PAGE_SIZE ) +return false; +return true; +} +/* Must be called with config_lock held */ static int __nbd_ioctl (struct block_device *bdev,struct nbd_device *nbd,unsigned int cmd,unsigned long arg)@@ -1252,8 +1262,9 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd,case NBD_SET_SOCK :return nbd_add_socket (nbd, arg, false);case NBD_SET_BLKSIZE : -if (!arg || !is_power_of_2 (arg) || arg <512 || - arg >PAGE_SIZE ) +if (!arg) + arg =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (arg))return -EINVAL ;nbd_size_set (nbd, arg,div_s64 (config->bytesize, arg));@@ -1333,7 +1344,7 @@ static struct nbd_config *nbd_alloc_config(void)atomic_set (&config->recv_threads,0 );init_waitqueue_head (&config->recv_wq);init_waitqueue_head (&config->conn_wait); - config->blksize =1024 ; + config->blksize =NBD_DEF_BLKSIZE ;atomic_set (&config->live_connections,0 );try_module_get (THIS_MODULE );return config;@@ -1769,6 +1780,12 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) {u64 bsize =nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]); +if (!bsize) + bsize =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (bsize)) { + ret = -EINVAL ; + goto out; + }nbd_size_set (nbd, bsize,div64_u64 (config->bytesize, bsize)); }if (info->attrs[NBD_ATTR_TIMEOUT ]) {
Re: [PATCH 1/2] nbd: fix crash when the blksize is zero v2
In reply to Mike ChristieQuoted 9 lines · Mike Christie
From: Xiubo Li <[email protected]>
This will allow the blksize to be set zero and then use 1024 as default.
Signed-off-by Xiubo Li <[email protected]>[fix to use goto out instead of return in genl_connect]Signed-off-by Mike Christie <[email protected]>---
Sorry I missed this second go around
Thanks,
Josef
PATCH 2/2 nbd: add netlink reconfigure resize support v3
In reply to Mike ChristieIf the device is setup with ioctl we can resize the device after the initial setup, but if the device is setup with netlink we cannot use the resize related ioctls and there is no netlink reconfigure size ATTR handling code.
This patch adds netlink reconfigure resize support to match the ioctl interface.
---
V3;
- If the device size or block size has not changed do not call nbd_size_set.
V2:
- Merge reconfig and connect resize related code to helper and avoid multiple nbd_size_set calls.
drivers/block/nbd.c | 48 ++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 16 deletions(-)
drivers/block/nbd.c +32 -16
@@ -1685,6 +1685,30 @@ nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { [NBD_DEVICE_CONNECTED] = { .type = NLA_U8 }, }; +static int nbd_genl_size_set (struct genl_info *info,struct nbd_device *nbd) +{ +struct nbd_config *config = nbd->config; +u64 bsize = config->blksize; +u64 bytes = config->bytesize; + +if (info->attrs[NBD_ATTR_SIZE_BYTES ]) + bytes =nla_get_u64 (info->attrs[NBD_ATTR_SIZE_BYTES ]); + +if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) { + bsize =nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]); +if (!bsize) + bsize =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (bsize)) { +printk (KERN_ERR "Invalid block size %llu\n" , bsize); +return -EINVAL ; + } + } + +if (bytes != config->bytesize || bsize != config->blksize) +nbd_size_set (nbd, bsize,div64_u64 (bytes, bsize)); +return 0 ; +} +static int nbd_genl_connect (struct sk_buff *skb,struct genl_info *info) {struct nbd_device *nbd =NULL ;
@@ -1772,22 +1796,10 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)refcount_set (&nbd->config_refs,1 );set_bit (NBD_BOUND , &config->runtime_flags); -if (info->attrs[NBD_ATTR_SIZE_BYTES ]) { -u64 bytes =nla_get_u64 (info->attrs[NBD_ATTR_SIZE_BYTES ]); -nbd_size_set (nbd, config->blksize, -div64_u64 (bytes, config->blksize)); - } -if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) { -u64 bsize = -nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]); -if (!bsize) - bsize =NBD_DEF_BLKSIZE ; -if (!nbd_is_valid_blksize (bsize)) { - ret = -EINVAL ; - goto out; - } -nbd_size_set (nbd, bsize,div64_u64 (config->bytesize, bsize)); - } + ret =nbd_genl_size_set (info, nbd); +if (ret) + goto out; +if (info->attrs[NBD_ATTR_TIMEOUT ]) {u64 timeout =nla_get_u64 (info->attrs[NBD_ATTR_TIMEOUT ]); nbd->tag_set.timeout = timeout *HZ ;
@@ -1956,6 +1968,10 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info) goto out; } + ret =nbd_genl_size_set (info, nbd); +if (ret) + goto out; +if (info->attrs[NBD_ATTR_TIMEOUT ]) {u64 timeout =nla_get_u64 (info->attrs[NBD_ATTR_TIMEOUT ]); nbd->tag_set.timeout = timeout *HZ ;
Signature · 1 line
2.21.0
Josef Bacik
maintainerRe: [PATCH 2/2] nbd: add netlink reconfigure resize support v3
Quoted 9 lines · Mike Christie
If the device is setup with ioctl we can resize the device after the initial setup, but if the device is setup with netlink we cannot use the resize related ioctls and there is no netlink reconfigure size ATTR handling code.
This patch adds netlink reconfigure resize support to match the ioctl interface.
Signed-off-by Mike Christie <[email protected]>
Sorry I missed this too, but I think there's a problem with this actually.
Quoted 32 lines
---
V3;
- If the device size or block size has not changed do not callnbd_size_set.V2:
- Merge reconfig and connect resize related code to helper and avoid multiplenbd_size_setcalls.drivers/block/nbd.c | 48 ++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 16 deletions(-)drivers/block/nbd.c +11
-0@@ -1685,6 +1685,30 @@ nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { [NBD_DEVICE_CONNECTED] = { .type = NLA_U8 }, }; +static int nbd_genl_size_set (struct genl_info *info,struct nbd_device *nbd) +{ +struct nbd_config *config = nbd->config; +u64 bsize = config->blksize; +u64 bytes = config->bytesize; + +if (info->attrs[NBD_ATTR_SIZE_BYTES ]) + bytes =nla_get_u64 (info->attrs[NBD_ATTR_SIZE_BYTES ]); + +if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) { + bsize =nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]);
drivers/block/nbd.c nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { · line 1708
Quoted 10 lines
drivers/block/nbd.c +10
-0+if (!bsize) + bsize =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (bsize)) { +printk (KERN_ERR "Invalid block size %llu\n" , bsize); +return -EINVAL ; + } + } + +if (bytes != config->bytesize || bsize != config->blksize) +nbd_size_set (nbd, bsize,div64_u64 (bytes, bsize));
This part won't actually update the bdev if there already is one because nbd->task_recv is NULL for netlink related devices. Probably need to fix that to update the bdev unconditionally, and then just see if bdget_disk() returns NULL in nbd_size_update. Also I hate myself for how many size update functions there are. Thanks,
Josef
Re: [PATCH 2/2] nbd: add netlink reconfigure resize support v3
Quoted 50 lines · Josef Bacik
Quoted 9 lines · Mike Christie
If the device is setup with ioctl we can resize the device after the initial setup, but if the device is setup with netlink we cannot use the resize related ioctls and there is no netlink reconfigure size ATTR handling code.
This patch adds netlink reconfigure resize support to match the ioctl interface.
Signed-off-by Mike Christie <[email protected]>Sorry I missed this too, but I think there's a problem with this actually.
Quoted 37 lines
---
V3;
- If the device size or block size has not changed do not callnbd_size_set.V2:
- Merge reconfig and connect resize related code to helper and avoid multiplenbd_size_setcalls.drivers/block/nbd.c | 48 ++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 16 deletions(-)drivers/block/nbd.c +16
-0@@ -1685,6 +1685,30 @@ nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { [NBD_DEVICE_CONNECTED] = { .type = NLA_U8 }, }; +static int nbd_genl_size_set (struct genl_info *info,struct nbd_device *nbd) +{ +struct nbd_config *config = nbd->config; +u64 bsize = config->blksize; +u64 bytes = config->bytesize; + +if (info->attrs[NBD_ATTR_SIZE_BYTES ]) + bytes =nla_get_u64 (info->attrs[NBD_ATTR_SIZE_BYTES ]); + +if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) { + bsize =nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]); +if (!bsize) + bsize =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (bsize)) { +printk (KERN_ERR "Invalid block size %llu\n" , bsize); +return -EINVAL ;
Quoted 8 lines
drivers/block/nbd.c nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { · line 1708
Quoted 5 lines
drivers/block/nbd.c +5
-0+ } + } + +if (bytes != config->bytesize || bsize != config->blksize) +nbd_size_set (nbd, bsize,div64_u64 (bytes, bsize));This part won't actually update the bdev if there already is one because
nbd->task_recvis NULL for netlink related devices. Probably need to fix that
I'm not sure I understand this part of the comment. For netlink we do:
nbd_genl_connect -> nbd_start_device:
nbd_start_device()
{
.....
nbd->task_recv = current;Quoted 6 lines
to update the bdev unconditionally, and then just see if
bdget_disk()returns NULL innbd_size_update. Also I hate myself for how many size update functions there are. Thanks,Josef
Re: [PATCH 2/2] nbd: add netlink reconfigure resize support v3
Quoted 60 lines · Mike Christie
Quoted 50 lines · Josef Bacik
Quoted 9 lines · Mike Christie
If the device is setup with ioctl we can resize the device after the initial setup, but if the device is setup with netlink we cannot use the resize related ioctls and there is no netlink reconfigure size ATTR handling code.
This patch adds netlink reconfigure resize support to match the ioctl interface.
Signed-off-by Mike Christie <[email protected]>Sorry I missed this too, but I think there's a problem with this actually.
Quoted 37 lines
---
V3;
- If the device size or block size has not changed do not callnbd_size_set.V2:
- Merge reconfig and connect resize related code to helper and avoid multiplenbd_size_setcalls.drivers/block/nbd.c | 48 ++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 16 deletions(-)drivers/block/nbd.c +16
-0@@ -1685,6 +1685,30 @@ nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { [NBD_DEVICE_CONNECTED] = { .type = NLA_U8 }, }; +static int nbd_genl_size_set (struct genl_info *info,struct nbd_device *nbd) +{ +struct nbd_config *config = nbd->config; +u64 bsize = config->blksize; +u64 bytes = config->bytesize; + +if (info->attrs[NBD_ATTR_SIZE_BYTES ]) + bytes =nla_get_u64 (info->attrs[NBD_ATTR_SIZE_BYTES ]); + +if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]) { + bsize =nla_get_u64 (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES ]); +if (!bsize) + bsize =NBD_DEF_BLKSIZE ; +if (!nbd_is_valid_blksize (bsize)) { +printk (KERN_ERR "Invalid block size %llu\n" , bsize); +return -EINVAL ;Quoted 8 lines
drivers/block/nbd.c nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { · line 1708
Quoted 5 lines
drivers/block/nbd.c +5
-0+ } + } + +if (bytes != config->bytesize || bsize != config->blksize) +nbd_size_set (nbd, bsize,div64_u64 (bytes, bsize));This part won't actually update the bdev if there already is one because
nbd->task_recvis NULL for netlink related devices. Probably need to fix that
Quoted 9 lines
I'm not sure I understand this part of the comment. For netlink we do:
nbd_genl_connect->nbd_start_device:
nbd_start_device(){ ..... nbd->task_recv = current;
Sorry, I can't read apparently.
Thanks,
Josef