Skip to contentSkip to conversation

Improve stability and add bug fixes of Aspeed video engine driver

PATCH New Jae Hyun Yoo 3 participants 15 messages May 31, 2019 – Jun 12, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover Improve stability and add bug fixes of Aspeed video engine driver

This patch series improves stability of Aspeed video engine driver by fixing clock control and irq handling logic in the driver. Also, it adds a couple of bug fixes and a workaroud for a silicon bug.

Changes since v2:
- Corrected re-allocation logic of source buffer.
- Removed an incorrect patch from this series (10/11 in v2).
- Added more details into the silicon bug workaround fix comment.

Changes since v1:
- Removed spinlock handling code from 0001 patch.
- Added 4 more patches.
Jae Hyun Yoo (10):
media: aspeed: fix a kernel warning on clk control
media: aspeed: refine clock control logic
media: aspeed: change irq to threaded irq
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
media: aspeed: remove source buffer allocation before mode detection
media: aspeed: use different delays for triggering VE H/W reset
media: aspeed: add a workaround to fix a silicon bug

 drivers/media/platform/aspeed-video.c | 156 ++++++++++++++------------
 1 file changed, 86 insertions(+), 70 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH v3 1/10 media: aspeed: fix a kernel warning on clk control

Video engine clock control can be double disabled and eventually it causes a kernel warning with stack dump printing out like below:

[  515.540498] ------------[ cut here ]------------
[  515.545174] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:684 clk_core_unprepare+0x13c/0x170
[  515.553806] vclk-gate already unprepared
[  515.557841] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G        W         5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1
[  515.568973] Hardware name: Generic DT based system
[  515.573777] Backtrace:
[  515.576272] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24)
[  515.583930]  r7:803a5614 r6:00000009 r5:00000000 r4:9d88fe1c
[  515.589712] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28)
[  515.597053] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc)
[  515.604557] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90)
[  515.612734]  r6:000002ac r5:8080befc r4:80a07008
[  515.617463] [<80116070>] (warn_slowpath_fmt) from [<803a5614>] (clk_core_unprepare+0x13c/0x170)
[  515.626167]  r3:8080cdf4 r2:8080bfc0
[  515.629834]  r7:98d682a8 r6:9d8a9200 r5:9e5151a0 r4:97abd620
[  515.635530] [<803a54d8>] (clk_core_unprepare) from [<803a76a4>] (clk_unprepare+0x34/0x3c)
[  515.643812]  r5:9e5151a0 r4:97abd620
[  515.647529] [<803a7670>] (clk_unprepare) from [<804f36ec>] (aspeed_video_off+0x38/0x50)
[  515.655539]  r5:9e5151a0 r4:9e504000
[  515.659242] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114)
[  515.668036]  r5:9e5044b0 r4:9e504000
[  515.671643] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8)
[  515.679999]  r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318
[  515.685695] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4)
[  515.692914]  r5:9e51b608 r4:9d8a9200
[  515.696597] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c)
[  515.703315]  r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc
[  515.711167] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0)
[  515.718596] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578)
[  515.726777]  r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000
[  515.732466] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20)
[  515.740727] Exception stack(0x9d88ffb0 to 0x9d88fff8)
[  515.745840] ffa0:                                     00000000 76f18094 00000000 00000000
[  515.754122] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000
[  515.762386] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007
[  515.769097]  r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778
[  515.777006]  r4:00000007
[  515.779558] ---[ end trace 12c04aadef8afbbb ]---
[  515.784176] ------------[ cut here ]------------
[  515.788817] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:825 clk_core_disable+0x18c/0x204
[  515.797161] eclk-gate already disabled
[  515.800916] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G        W         5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1
[  515.811945] Hardware name: Generic DT based system
[  515.816730] Backtrace:
[  515.819210] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24)
[  515.826782]  r7:803a5900 r6:00000009 r5:00000000 r4:9d88fe04
[  515.832454] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28)
[  515.839687] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc)
[  515.847170] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90)
[  515.855247]  r6:00000339 r5:8080befc r4:80a07008
[  515.859868] [<80116070>] (warn_slowpath_fmt) from [<803a5900>] (clk_core_disable+0x18c/0x204)
[  515.868385]  r3:8080cdd0 r2:8080c00c
[  515.871957]  r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:97abd560
[  515.877615] [<803a5774>] (clk_core_disable) from [<803a59a0>] (clk_core_disable_lock+0x28/0x34)
[  515.886301]  r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:a0000013
[  515.891960] [<803a5978>] (clk_core_disable_lock) from [<803a7714>] (clk_disable+0x2c/0x30)
[  515.900216]  r5:9e5151a0 r4:9e515f60
[  515.903816] [<803a76e8>] (clk_disable) from [<804f36f8>] (aspeed_video_off+0x44/0x50)
[  515.911656] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114)
[  515.920341]  r5:9e5044b0 r4:9e504000
[  515.923921] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8)
[  515.932184]  r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318
[  515.937851] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4)
[  515.944980]  r5:9e51b608 r4:9d8a9200
[  515.948559] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c)
[  515.955257]  r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc
[  515.963008] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0)
[  515.970333] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578)
[  515.978421]  r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000
[  515.984086] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20)
[  515.992247] Exception stack(0x9d88ffb0 to 0x9d88fff8)
[  515.997296] ffa0:                                     00000000 76f18094 00000000 00000000
[  516.005473] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000
[  516.013642] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007
[  516.020257]  r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778
[  516.028072]  r4:00000007
[  516.030606] ---[ end trace 12c04aadef8afbbc ]---

To prevent this issue, this commit adds clock status checking logic into the Aspeed video engine driver.

---
v2 -> v3:
None.

v1 -> v2:
Removed spinlock handling code. Actual fix for removing the kernel warning is blocking double disabling of video clocks. Refactoring of protection mechanism of this driver will be submitted using a seprate patch series.

 drivers/media/platform/aspeed-video.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/media/platform/aspeed-video.c +11 -0
index 8144fe36ad48..562d7c0adc78 100644
@@ -187,6 +187,7 @@ enum {
 	VIDEO_STREAMING,
 	VIDEO_FRAME_INPRG,
 	VIDEO_STOPPED,
+	VIDEO_CLOCKS_ON,
 };
 
 struct aspeed_video_addr {
@@ -483,19 +484,29 @@ static void aspeed_video_enable_mode_detect(struct aspeed_video *video)
 
 static void aspeed_video_off(struct aspeed_video *video)
 {
+	if (!test_bit(VIDEO_CLOCKS_ON, &video->flags))
+		return;
+
 	/* Disable interrupts */
 	aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
 
 	/* Turn off the relevant clocks */
 	clk_disable_unprepare(video->vclk);
 	clk_disable_unprepare(video->eclk);
+
+	clear_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
 
 static void aspeed_video_on(struct aspeed_video *video)
 {
+	if (test_bit(VIDEO_CLOCKS_ON, &video->flags))
+		return;
+
 	/* Turn on the relevant clocks */
 	clk_prepare_enable(video->eclk);
 	clk_prepare_enable(video->vclk);
+
+	set_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
 
 static void aspeed_video_bufs_done(struct aspeed_video *video,
Signature · 1 line
2.21.0
#2 lore raw

PATCH v3 2/10 media: aspeed: refine clock control logic

In reply to Jae Hyun Yoo

Currently, this driver calls clk_prepare and clk_unprepare from interrupt context too but these should be called from sleepable context only. To fix this issue, this commit splits out clk_enable/disable and clk_prepare/unprepare, and it places clk_prepare/unprepare calls into the module probe/remove function.

---
v2 -> v3:
None.

v1 -> v2:
None.

 drivers/media/platform/aspeed-video.c | 38 ++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 9 deletions(-)
drivers/media/platform/aspeed-video.c +29 -9
index 562d7c0adc78..7982ce634936 100644
@@ -491,8 +491,8 @@ static void aspeed_video_off(struct aspeed_video *video)
 	aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
 
 	/* Turn off the relevant clocks */
-	clk_disable_unprepare(video->vclk);
-	clk_disable_unprepare(video->eclk);
+	clk_disable(video->vclk);
+	clk_disable(video->eclk);
 
 	clear_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
@@ -503,8 +503,8 @@ static void aspeed_video_on(struct aspeed_video *video)
 		return;
 
 	/* Turn on the relevant clocks */
-	clk_prepare_enable(video->eclk);
-	clk_prepare_enable(video->vclk);
+	clk_enable(video->eclk);
+	clk_enable(video->vclk);
 
 	set_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
@@ -1613,31 +1613,46 @@ static int aspeed_video_init(struct aspeed_video *video)
 		return PTR_ERR(video->eclk);
 	}
 
+	rc = clk_prepare(video->eclk);
+	if (rc)
+		return rc;
+
 	video->vclk = devm_clk_get(dev, "vclk");
 	if (IS_ERR(video->vclk)) {
 		dev_err(dev, "Unable to get VCLK\n");
-		return PTR_ERR(video->vclk);
+		rc = PTR_ERR(video->vclk);
+		goto err_unprepare_eclk;
 	}
 
+	rc = clk_prepare(video->vclk);
+	if (rc)
+		goto err_unprepare_eclk;
+
 	of_reserved_mem_device_init(dev);
 
 	rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(dev, "Failed to set DMA mask\n");
-		of_reserved_mem_device_release(dev);
-		return rc;
+		goto err_release_reserved_mem;
 	}
 
 	if (!aspeed_video_alloc_buf(video, &video->jpeg,
 				    VE_JPEG_HEADER_SIZE)) {
 		dev_err(dev, "Failed to allocate DMA for JPEG header\n");
-		of_reserved_mem_device_release(dev);
-		return rc;
+		goto err_release_reserved_mem;
 	}
 
 	aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
 
 	return 0;
+
+err_release_reserved_mem:
+	of_reserved_mem_device_release(dev);
+	clk_unprepare(video->vclk);
+err_unprepare_eclk:
+	clk_unprepare(video->eclk);
+
+	return rc;
 }
 
 static int aspeed_video_probe(struct platform_device *pdev)
@@ -1681,6 +1696,11 @@ static int aspeed_video_remove(struct platform_device *pdev)
 	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
 	struct aspeed_video *video = to_aspeed_video(v4l2_dev);
 
+	aspeed_video_off(video);
+
+	clk_unprepare(video->vclk);
+	clk_unprepare(video->eclk);
+
 	video_unregister_device(&video->vdev);
 
 	vb2_queue_release(&video->queue);
Signature · 1 line
2.21.0
#3 lore raw

PATCH v3 3/10 media: aspeed: change irq to threaded irq

In reply to Jae Hyun Yoo

Differently from other Aspeed drivers, this driver calls clock control APIs in interrupt context. Since ECLK is coupled with a reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of busy waiting delay for triggering the reset and it will eventually disturb other drivers' interrupt handling. To fix this issue, this commit changes this driver's irq to threaded irq so that the delay can be happened in a thread context.

---
v2 -> v3:
None.

v1 -> v2:
None.

 drivers/media/platform/aspeed-video.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/media/platform/aspeed-video.c +3 -2
index 7982ce634936..f7db8969c8f2 100644
@@ -1600,8 +1600,9 @@ static int aspeed_video_init(struct aspeed_video *video)
 		return -ENODEV;
 	}
 
-	rc = devm_request_irq(dev, irq, aspeed_video_irq, IRQF_SHARED,
-			      DEVICE_NAME, video);
+	rc = devm_request_threaded_irq(dev, irq, NULL, aspeed_video_irq,
+				       IRQF_ONESHOT | IRQF_SHARED, DEVICE_NAME,
+				       video);
 	if (rc < 0) {
 		dev_err(dev, "Unable to request IRQ %d\n", irq);
 		return rc;
Signature · 1 line
2.21.0
#4 lore raw

PATCH v3 4/10 media: aspeed: remove IRQF_SHARED flag

In reply to Jae Hyun Yoo

Video Engine has a dedicated interrupt line so this driver doesn't need to use IRQF_SHARED flag so remove it. Also, it'd be good for following what Thomas recommended in the IRQF_ONESHOT support patch like below:

"Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms."

---
v2 -> v3:
None.

v1 -> v2:
None.

 drivers/media/platform/aspeed-video.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/media/platform/aspeed-video.c +1 -2
index f7db8969c8f2..d1b541409544 100644
@@ -1601,8 +1601,7 @@ static int aspeed_video_init(struct aspeed_video *video)
 	}
 
 	rc = devm_request_threaded_irq(dev, irq, NULL, aspeed_video_irq,
-				       IRQF_ONESHOT | IRQF_SHARED, DEVICE_NAME,
-				       video);
+				       IRQF_ONESHOT, DEVICE_NAME, video);
 	if (rc < 0) {
 		dev_err(dev, "Unable to request IRQ %d\n", irq);
 		return rc;
Signature · 1 line
2.21.0
#5 lore raw

PATCH v3 5/10 media: aspeed: reduce noisy log printing outs

In reply to Jae Hyun Yoo

Currently, this driver prints out too much log messages when a mode change happens, video turned off by screen saver and etc. Actually, all cases are reported to user space properly. Also, these are not critical errors but recoverable things, so this commit changes the log level of some noisy printing outs.

---
v2 -> v3:
None.

v1 -> v2:
None.

 drivers/media/platform/aspeed-video.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/media/platform/aspeed-video.c +5 -5
index d1b541409544..92abdfc79e76 100644
@@ -441,7 +441,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 
 	if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
 	    !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
-		dev_err(video->dev, "Engine busy; don't start frame\n");
+		dev_dbg(video->dev, "Engine busy; don't start frame\n");
 		return -EBUSY;
 	}
 
@@ -769,7 +769,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      res_check(video),
 						      MODE_DETECT_TIMEOUT);
 		if (!rc) {
-			dev_err(video->dev, "Timed out; first mode detect\n");
+			dev_dbg(video->dev, "Timed out; first mode detect\n");
 			clear_bit(VIDEO_RES_DETECT, &video->flags);
 			return;
 		}
@@ -787,7 +787,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      MODE_DETECT_TIMEOUT);
 		clear_bit(VIDEO_RES_DETECT, &video->flags);
 		if (!rc) {
-			dev_err(video->dev, "Timed out; second mode detect\n");
+			dev_dbg(video->dev, "Timed out; second mode detect\n");
 			return;
 		}
 
@@ -821,7 +821,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	} while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
 
 	if (invalid_resolution) {
-		dev_err(video->dev, "Invalid resolution detected\n");
+		dev_dbg(video->dev, "Invalid resolution detected\n");
 		return;
 	}
 
@@ -1456,7 +1456,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
 				!test_bit(VIDEO_FRAME_INPRG, &video->flags),
 				STOP_TIMEOUT);
 	if (!rc) {
-		dev_err(video->dev, "Timed out when stopping streaming\n");
+		dev_dbg(video->dev, "Timed out when stopping streaming\n");
 
 		/*
 		 * Need to force stop any DMA and try and get HW into a good
Signature · 1 line
2.21.0
#6 lore raw

PATCH v3 6/10 media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE

In reply to Jae Hyun Yoo

VE_INTERRUPT_CAPTURE_COMPLETE and VE_INTERRUPT_COMP_COMPLETE are not set at the same time but the current interrupt handling mechanism of this driver doesn't clear the interrupt flag until both two are set, and this behavior causes unnecessary interrupt handler calls. In fact, this driver provides JPEG format only so taking care of the VE_INTERRUPT_COMP_COMPLETE is enough for getting compressed image frame so this commit gets rid of the VE_INTERRUPT_CAPTURE_COMPLETE checking logic to simplify the logic. Handling of VE_INTERRUPT_CAPTURE_COMPLETE could be added back later when it's actually needed.

---
v2 -> v3:
None.

v1 -> v2:
None.

 drivers/media/platform/aspeed-video.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/media/platform/aspeed-video.c +4 -8
index 92abdfc79e76..1cba582918cc 100644
@@ -463,8 +463,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 	aspeed_video_write(video, VE_COMP_ADDR, addr);
 
 	aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
-			    VE_INTERRUPT_COMP_COMPLETE |
-			    VE_INTERRUPT_CAPTURE_COMPLETE);
+			    VE_INTERRUPT_COMP_COMPLETE);
 
 	aspeed_video_update(video, VE_SEQ_CTRL, 0,
 			    VE_SEQ_CTRL_TRIG_CAPTURE | VE_SEQ_CTRL_TRIG_COMP);
@@ -568,8 +567,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 		}
 	}
 
-	if ((sts & VE_INTERRUPT_COMP_COMPLETE) &&
-	    (sts & VE_INTERRUPT_CAPTURE_COMPLETE)) {
+	if (sts & VE_INTERRUPT_COMP_COMPLETE) {
 		struct aspeed_video_buffer *buf;
 		u32 frame_size = aspeed_video_read(video,
 						   VE_OFFSET_COMP_STREAM);
@@ -598,11 +596,9 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 				    VE_SEQ_CTRL_FORCE_IDLE |
 				    VE_SEQ_CTRL_TRIG_COMP, 0);
 		aspeed_video_update(video, VE_INTERRUPT_CTRL,
-				    VE_INTERRUPT_COMP_COMPLETE |
-				    VE_INTERRUPT_CAPTURE_COMPLETE, 0);
+				    VE_INTERRUPT_COMP_COMPLETE, 0);
 		aspeed_video_write(video, VE_INTERRUPT_STATUS,
-				   VE_INTERRUPT_COMP_COMPLETE |
-				   VE_INTERRUPT_CAPTURE_COMPLETE);
+				   VE_INTERRUPT_COMP_COMPLETE);
 
 		if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
 			aspeed_video_start_frame(video);
Signature · 1 line
2.21.0
#7 lore raw

PATCH v3 7/10 media: aspeed: refine interrupt handling logic

In reply to Jae Hyun Yoo

There are cases that interrupt bits are cleared by a 500ms delayed work which causes unnecessary irq calls. Also, the current interrupt handler returns IRQ_HANDLED always but it should return IRQ_NONE if there is any unhandled interrupt. So this commit refines the interrupt handling logic to fix these issues.

---
v2 -> v3:
None.

v1 -> v2:
None.

 drivers/media/platform/aspeed-video.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/media/platform/aspeed-video.c +4 -3
index 1cba582918cc..c0b889141b8f 100644
@@ -488,6 +488,7 @@ static void aspeed_video_off(struct aspeed_video *video)
 
 	/* Disable interrupts */
 	aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
+	aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
 
 	/* Turn off the relevant clocks */
 	clk_disable(video->vclk);
@@ -554,7 +555,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 					    VE_INTERRUPT_MODE_DETECT, 0);
 			aspeed_video_write(video, VE_INTERRUPT_STATUS,
 					   VE_INTERRUPT_MODE_DETECT);
-
+			sts &= ~VE_INTERRUPT_MODE_DETECT;
 			set_bit(VIDEO_MODE_DETECT_DONE, &video->flags);
 			wake_up_interruptible_all(&video->wait);
 		} else {
@@ -599,12 +600,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 				    VE_INTERRUPT_COMP_COMPLETE, 0);
 		aspeed_video_write(video, VE_INTERRUPT_STATUS,
 				   VE_INTERRUPT_COMP_COMPLETE);
-
+		sts &= ~VE_INTERRUPT_COMP_COMPLETE;
 		if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
 			aspeed_video_start_frame(video);
 	}
 
-	return IRQ_HANDLED;
+	return sts ? IRQ_NONE : IRQ_HANDLED;
 }
 
 static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
Signature · 1 line
2.21.0
#8 lore raw

PATCH v3 8/10 media: aspeed: remove source buffer allocation before mode detection

In reply to Jae Hyun Yoo

Mode detection doesn't require source buffer allocation so this commit removes that.

---
v2 -> v3:
Corrected re-allocation logic of source buffers.

v1 -> v2:
New.

 drivers/media/platform/aspeed-video.c | 37 ++++-----------------------
 1 file changed, 5 insertions(+), 32 deletions(-)
drivers/media/platform/aspeed-video.c +5 -32
index c0b889141b8f..d6708ddb0391 100644
@@ -731,27 +731,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	det->height = MIN_HEIGHT;
 	video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
 
-	/*
-	 * Since we need max buffer size for detection, free the second source
-	 * buffer first.
-	 */
-	if (video->srcs[1].size)
-		aspeed_video_free_buf(video, &video->srcs[1]);
-
-	if (video->srcs[0].size < VE_MAX_SRC_BUFFER_SIZE) {
-		if (video->srcs[0].size)
-			aspeed_video_free_buf(video, &video->srcs[0]);
-
-		if (!aspeed_video_alloc_buf(video, &video->srcs[0],
-					    VE_MAX_SRC_BUFFER_SIZE)) {
-			dev_err(video->dev,
-				"Failed to allocate source buffers\n");
-			return;
-		}
-	}
-
-	aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
-
 	do {
 		if (tries) {
 			set_current_state(TASK_INTERRUPTIBLE);
@@ -871,20 +850,14 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 
 	size *= 4;
 
-	if (size == video->srcs[0].size / 2) {
-		aspeed_video_write(video, VE_SRC1_ADDR,
-				   video->srcs[0].dma + size);
-	} else if (size == video->srcs[0].size) {
-		if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
-			goto err_mem;
-
-		aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
-	} else {
-		aspeed_video_free_buf(video, &video->srcs[0]);
+	if (size != video->srcs[0].size) {
+		if (video->srcs[0].size)
+			aspeed_video_free_buf(video, &video->srcs[0]);
+		if (video->srcs[1].size)
+			aspeed_video_free_buf(video, &video->srcs[1]);
 
 		if (!aspeed_video_alloc_buf(video, &video->srcs[0], size))
 			goto err_mem;
-
 		if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
 			goto err_mem;
 
Signature · 1 line
2.21.0
#9 lore raw

PATCH v3 9/10 media: aspeed: use different delays for triggering VE H/W reset

In reply to Jae Hyun Yoo

In case of watchdog timeout detected while doing mode detection, it's better triggering video engine hardware reset immediately so this commit fixes code for the case. Other than the case, it will trigger video engine hardware reset after RESOLUTION_CHANGE_DELAY.

---
v2 -> v3:
None.

v1 -> v2:
New.

 drivers/media/platform/aspeed-video.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/media/platform/aspeed-video.c +5 -4
index d6708ddb0391..ba093096a5a7 100644
@@ -522,7 +522,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
 	spin_unlock_irqrestore(&video->lock, flags);
 }
 
-static void aspeed_video_irq_res_change(struct aspeed_video *video)
+static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
 {
 	dev_dbg(video->dev, "Resolution changed; resetting\n");
 
@@ -532,7 +532,7 @@ static void aspeed_video_irq_res_change(struct aspeed_video *video)
 	aspeed_video_off(video);
 	aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
 
-	schedule_delayed_work(&video->res_work, RESOLUTION_CHANGE_DELAY);
+	schedule_delayed_work(&video->res_work, delay);
 }
 
 static irqreturn_t aspeed_video_irq(int irq, void *arg)
@@ -545,7 +545,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 	 * re-initialize
 	 */
 	if (sts & VE_INTERRUPT_MODE_DETECT_WD) {
-		aspeed_video_irq_res_change(video);
+		aspeed_video_irq_res_change(video, 0);
 		return IRQ_HANDLED;
 	}
 
@@ -563,7 +563,8 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 			 * Signal acquired while NOT doing resolution
 			 * detection; reset the engine and re-initialize
 			 */
-			aspeed_video_irq_res_change(video);
+			aspeed_video_irq_res_change(video,
+						    RESOLUTION_CHANGE_DELAY);
 			return IRQ_HANDLED;
 		}
 	}
Signature · 1 line
2.21.0
#10 lore raw

PATCH v3 10/10 media: aspeed: add a workaround to fix a silicon bug

In reply to Jae Hyun Yoo

AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same.

---
v2 -> v3:
Added more detail comments why the value 1728 is picked.

v1 -> v2:
New.

 drivers/media/platform/aspeed-video.c | 28 ++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)
drivers/media/platform/aspeed-video.c +21 -7
index ba093096a5a7..f899ac3b4a61 100644
@@ -824,8 +824,29 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 	struct v4l2_bt_timings *act = &video->active_timings;
 	unsigned int size = act->width * act->height;
 
+	/* Set capture/compression frame sizes */
 	aspeed_video_calc_compressed_size(video, size);
 
+	if (video->active_timings.width == 1680) {
+		/*
+		 * This is a workaround to fix a silicon bug on A1 and A2
+		 * revisions. Since it doesn't break capturing operation of
+		 * other revisions, use it for all revisions without checking
+		 * the revision ID. It picked 1728 which is a very next
+		 * 64-pixels aligned value to 1680 to minimize memory bandwidth
+		 * and to get better access speed from video engine.
+		 */
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   1728 << 16 | act->height);
+		size += (1728 - 1680) * video->active_timings.height;
+	} else {
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   act->width << 16 | act->height);
+	}
+	aspeed_video_write(video, VE_COMP_WINDOW,
+			   act->width << 16 | act->height);
+	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
+
 	/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
 	if (size < DIRECT_FETCH_THRESHOLD) {
 		aspeed_video_write(video, VE_TGS_0,
@@ -842,13 +863,6 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
 	}
 
-	/* Set capture/compression frame sizes */
-	aspeed_video_write(video, VE_CAP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_COMP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
-
 	size *= 4;
 
 	if (size != video->srcs[0].size) {
Signature · 1 line
2.21.0
#11 lore raw

PATCH v3 10/10 media: aspeed: add a workaround to fix a silicon bug

Hi Eddie,

All patches in this series were queued to linux/media tree except this one. Can you please review this patch?

Thanks,
Jae

Quoted 67 lines · Jae Hyun Yoo

AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same.

---
v2 -> v3:
Added more detail comments why the value 1728 is picked.

v1 -> v2:
New.

  drivers/media/platform/aspeed-video.c | 28 ++++++++++++++++++++-------
  1 file changed, 21 insertions(+), 7 deletions(-)
drivers/media/platform/aspeed-video.c +21 -7
index ba093096a5a7..f899ac3b4a61 100644
@@ -824,8 +824,29 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
  	struct v4l2_bt_timings *act = &video->active_timings;
  	unsigned int size = act->width * act->height;
 
+	/* Set capture/compression frame sizes */
  	aspeed_video_calc_compressed_size(video, size);
 
+	if (video->active_timings.width == 1680) {
+		/*
+		 * This is a workaround to fix a silicon bug on A1 and A2
+		 * revisions. Since it doesn't break capturing operation of
+		 * other revisions, use it for all revisions without checking
+		 * the revision ID. It picked 1728 which is a very next
+		 * 64-pixels aligned value to 1680 to minimize memory bandwidth
+		 * and to get better access speed from video engine.
+		 */
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   1728 << 16 | act->height);
+		size += (1728 - 1680) * video->active_timings.height;
+	} else {
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   act->width << 16 | act->height);
+	}
+	aspeed_video_write(video, VE_COMP_WINDOW,
+			   act->width << 16 | act->height);
+	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
+
  	/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
  	if (size < DIRECT_FETCH_THRESHOLD) {
  		aspeed_video_write(video, VE_TGS_0,
@@ -842,13 +863,6 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
  		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
  	}
 
-	/* Set capture/compression frame sizes */
-	aspeed_video_write(video, VE_CAP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_COMP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
-
  	size *= 4;
 
  	if (size != video->srcs[0].size) {
#12 lore raw

PATCH v3 10/10 media: aspeed: add a workaround to fix a silicon bug

Eddie: ping!

Regards,

Hans

Quoted 76 lines · Jae Hyun Yoo

Hi Eddie,

All patches in this series were queued to linux/media tree except this one. Can you please review this patch?

Thanks,
Jae

Quoted 67 lines · Jae Hyun Yoo

AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same.

---
v2 -> v3:
Added more detail comments why the value 1728 is picked.

v1 -> v2:
New.

  drivers/media/platform/aspeed-video.c | 28 ++++++++++++++++++++-------
  1 file changed, 21 insertions(+), 7 deletions(-)
drivers/media/platform/aspeed-video.c +21 -7
index ba093096a5a7..f899ac3b4a61 100644
@@ -824,8 +824,29 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
  	struct v4l2_bt_timings *act = &video->active_timings;
  	unsigned int size = act->width * act->height;
 
+	/* Set capture/compression frame sizes */
  	aspeed_video_calc_compressed_size(video, size);
 
+	if (video->active_timings.width == 1680) {
+		/*
+		 * This is a workaround to fix a silicon bug on A1 and A2
+		 * revisions. Since it doesn't break capturing operation of
+		 * other revisions, use it for all revisions without checking
+		 * the revision ID. It picked 1728 which is a very next
+		 * 64-pixels aligned value to 1680 to minimize memory bandwidth
+		 * and to get better access speed from video engine.
+		 */
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   1728 << 16 | act->height);
+		size += (1728 - 1680) * video->active_timings.height;
+	} else {
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   act->width << 16 | act->height);
+	}
+	aspeed_video_write(video, VE_COMP_WINDOW,
+			   act->width << 16 | act->height);
+	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
+
  	/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
  	if (size < DIRECT_FETCH_THRESHOLD) {
  		aspeed_video_write(video, VE_TGS_0,
@@ -842,13 +863,6 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
  		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
  	}
 
-	/* Set capture/compression frame sizes */
-	aspeed_video_write(video, VE_CAP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_COMP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
-
  	size *= 4;
 
  	if (size != video->srcs[0].size) {
#13 lore raw

PATCH v3 10/10 media: aspeed: add a workaround to fix a silicon bug

Quoted 22 lines · Hans Verkuil

Eddie: ping!

Regards,

Hans

Quoted 15 lines · Jae Hyun Yoo

Hi Eddie,

All patches in this series were queued to linux/media tree except this one. Can you please review this patch?

Thanks,
Jae

Quoted 6 lines · Jae Hyun Yoo

AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same.

Sorry, missed your followup email Jae and assumed everything was merged.

Looks fine to me.

Quoted 61 lines
Quoted 61 lines
Quoted 61 lines

---
v2 -> v3:
Added more detail comments why the value 1728 is picked.

v1 -> v2:
New.

   drivers/media/platform/aspeed-video.c | 28 ++++++++++++++++++++-------
   1 file changed, 21 insertions(+), 7 deletions(-)
drivers/media/platform/aspeed-video.c +21 -7
index ba093096a5a7..f899ac3b4a61 100644
@@ -824,8 +824,29 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
   	struct v4l2_bt_timings *act = &video->active_timings;
   	unsigned int size = act->width * act->height;
 
+	/* Set capture/compression frame sizes */
   	aspeed_video_calc_compressed_size(video, size);
 
+	if (video->active_timings.width == 1680) {
+		/*
+		 * This is a workaround to fix a silicon bug on A1 and A2
+		 * revisions. Since it doesn't break capturing operation of
+		 * other revisions, use it for all revisions without checking
+		 * the revision ID. It picked 1728 which is a very next
+		 * 64-pixels aligned value to 1680 to minimize memory bandwidth
+		 * and to get better access speed from video engine.
+		 */
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   1728 << 16 | act->height);
+		size += (1728 - 1680) * video->active_timings.height;
+	} else {
+		aspeed_video_write(video, VE_CAP_WINDOW,
+				   act->width << 16 | act->height);
+	}
+	aspeed_video_write(video, VE_COMP_WINDOW,
+			   act->width << 16 | act->height);
+	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
+
   	/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
   	if (size < DIRECT_FETCH_THRESHOLD) {
   		aspeed_video_write(video, VE_TGS_0,
@@ -842,13 +863,6 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
   		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
   	}
 
-	/* Set capture/compression frame sizes */
-	aspeed_video_write(video, VE_CAP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_COMP_WINDOW,
-			   act->width << 16 | act->height);
-	aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
-
   	size *= 4;
 
   	if (size != video->srcs[0].size) {
#14 lore raw

PATCH v3 10/10 media: aspeed: add a workaround to fix a silicon bug

Quoted 17 lines · Eddie James
Quoted 15 lines · Hans Verkuil

Eddie: ping!

Regards,

????Hans

Quoted 8 lines · Jae Hyun Yoo

Hi Eddie,

All patches in this series were queued to linux/media tree except this one. Can you please review this patch?

Thanks,
Jae

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines · Jae Hyun Yoo
Quoted 6 lines

AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same.

Hi Hans,

Can you please fix a typo in the commit message when you queue this patch? Thanks in advance!

s/extremly/extremely/g

Quoted 8 lines

Sorry, missed your followup email Jae and assumed everything was merged.

Looks fine to me.

Thanks for your review Eddie!

Regards,
Jae