Skip to contentSkip to conversation

riscv: add initial LiteX SoC support

RFC In review Antony Pavlov 4 participants 9 messages Jun 2, 2019 – Jun 7, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover riscv: add initial LiteX SoC support

This RFC patchseries adds initial LiteX RISC-V SoC support for barebox.

You can obtain this patchseries from github:

    $ git clone -b 20190602.litex https://github.com/frantony/barebox

LiteX is a Migen-based System on Chip [1], supporting softcore VexRiscv CPU,
a 32-bits Linux Capable RISC-V CPU [2].

All the components used to create the LiteX SoC are open-source and the flexibility of Spinal HDL/Migen allow targeting easily very various FPGA devices/boards: Lattice, Altera, Xilinx, Microsemi FPGAs with SDRAM/DDR/DDR2/DDR3/DDR4 RAMs, RMII/MII/RGMII/1000BASE-X Ethernet PHYs.

The LiteX SoC with VexRiscv CPU can be deployed on e.g. Digilent ARTY board [3] or Terasic DE0-Nano board [4].

You can boot barebox from serial port using flterm [5]:, e.g.:

flterm --port /dev/ttyUSB0 --kernel <path_to_barebox.bin> --kernel-adr 0x40000000

TODO
====

* add pbl support for riscv barebox;
* add liteeth Ethernet core support [6] (tip: use ARTY board);
* fix issues (see the WIP commit);
* use barebox to start linux [2] and zephyr [7].

REFERENCES
==========

[1] https://github.com/enjoy-digital/litex
[2] https://github.com/enjoy-digital/linux-on-litex-vexriscv
[3] https://store.digilentinc.com/arty-a7-artix-7-fpga-development-board-for-makers-and-hobbyists/
[4] http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=593
[5] https://github.com/timvideos/flterm
[6] https://github.com/enjoy-digital/liteeth
[7] https://github.com/zephyrproject-rtos/zephyr/tree/master/boards/riscv32/litex_vexriscv

Antony Pavlov (4):
riscv: add initial LiteX SoC support
serial: add litex UART driver
WIP: make it work on litex
riscv: add litex_defconfig

 arch/riscv/Kconfig                            |   6 +
 arch/riscv/Makefile                           |   1 +
 arch/riscv/boot/start.S                       |   2 -
 arch/riscv/configs/litex_defconfig            |  45 +++++++
 arch/riscv/dts/litex-generic.dts              |  17 +++
 arch/riscv/dts/litex.dtsi                     |  36 +++++
 arch/riscv/mach-litex/Kconfig                 |  11 ++
 arch/riscv/mach-litex/Makefile                |   3 +
 arch/riscv/mach-litex/include/mach/debug_ll.h | 124 ++++++++++++++++++
 common/bootm.c                                |   2 +
 drivers/serial/Makefile                       |   1 +
 drivers/serial/serial_litex.c                 |  99 ++++++++++++++
 12 files changed, 345 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/configs/litex_defconfig
 create mode 100644 arch/riscv/dts/litex-generic.dts
 create mode 100644 arch/riscv/dts/litex.dtsi
 create mode 100644 arch/riscv/mach-litex/Kconfig
 create mode 100644 arch/riscv/mach-litex/Makefile
 create mode 100644 arch/riscv/mach-litex/include/mach/debug_ll.h
 create mode 100644 drivers/serial/serial_litex.c
Signature · 7 lines
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

RFC 1/4 riscv: add initial LiteX SoC support

LiteX is a Migen-based System on Chip, supporting softcore VexRiscv CPU,
a 32-bits Linux Capable RISC-V CPU.

See https://github.com/enjoy-digital/litex for details.

---
 arch/riscv/Kconfig                            |   6 +
 arch/riscv/Makefile                           |   1 +
 arch/riscv/dts/litex-generic.dts              |  17 +++
 arch/riscv/dts/litex.dtsi                     |  36 +++++
 arch/riscv/mach-litex/Kconfig                 |  11 ++
 arch/riscv/mach-litex/Makefile                |   3 +
 arch/riscv/mach-litex/include/mach/debug_ll.h | 124 ++++++++++++++++++
 7 files changed, 198 insertions(+)
arch/riscv/Kconfig +6 -0
index 16c3eecce6..ca764d54d0 100644
@@ -24,6 +24,11 @@ config MACH_ERIZO
 	select HAS_DEBUG_LL
 	select HAS_NMON
 
+config MACH_LITEX
+	bool "litex family"
+	select HAS_DEBUG_LL
+	select HAS_NMON
+
 endchoice
 
 choice
@@ -63,6 +68,7 @@ config BUILTIN_DTB_NAME
 	depends on BUILTIN_DTB
 
 source "arch/riscv/mach-erizo/Kconfig"
+source "arch/riscv/mach-litex/Kconfig"
 
 endmenu
 
arch/riscv/Makefile +1 -0
index 643c0bc8eb..955a10cecb 100644
@@ -12,6 +12,7 @@ LDFLAGS += $(ldflags-y)
 LDFLAGS_barebox += -nostdlib
 
 machine-$(CONFIG_MACH_ERIZO)	:= erizo
+machine-$(CONFIG_MACH_LITEX)	:= litex
 
 TEXT_BASE = $(CONFIG_TEXT_BASE)
 CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
arch/riscv/dts/litex-generic.dts new file +17 -0
new file mode 100644
index 0000000000..7dc0fa6c79
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "litex.dtsi"
+
+/ {
+	model = "LiteX VexRiscV";
+	compatible = "litex,vexriscv";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x00800000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
arch/riscv/dts/litex.dtsi new file +36 -0
new file mode 100644
index 0000000000..dfd3d83404
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+/ {
+	compatible = "litex,vexriscv", "litex-dev";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		ref_clk: ref_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "spinalhdl,vexriscv", "riscv";
+			clocks = <&ref_clk>;
+			reg = <0>;
+		};
+	};
+
+	uart0: serial@e0001800 {
+		compatible = "litex,uart";
+		reg = <0xe0001800 0x18>;
+		status = "disabled";
+	};
+};
arch/riscv/mach-litex/Kconfig new file +11 -0
new file mode 100644
index 0000000000..ab6cd2fa01
@@ -0,0 +1,11 @@
+if MACH_LITEX
+
+choice
+	prompt "Board type"
+
+config BOARD_LITEX_GENERIC
+	bool "litex generic board"
+
+endchoice
+
+endif
arch/riscv/mach-litex/Makefile new file +3 -0
new file mode 100644
index 0000000000..d9c51e74c3
@@ -0,0 +1,3 @@
+# just to build a built-in.o. Otherwise compilation fails when no o-files is
+# created.
+obj- += dummy.o
arch/riscv/mach-litex/include/mach/debug_ll.h new file +124 -0

124 lines not on this page · raw message

Signature · 7 lines
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

RFC 2/4 serial: add litex UART driver

In reply to Antony Pavlov
---
 drivers/serial/Makefile       |  1 +
 drivers/serial/serial_litex.c | 99 +++++++++++++++++++++++++++++++++++
 2 files changed, 100 insertions(+)
drivers/serial/Makefile +1 -0
index 4174cc1ffb..fa86aa8c05 100644
@@ -23,3 +23,4 @@ obj-$(CONFIG_DRIVER_SERIAL_CADENCE)		+= serial_cadence.o
 obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO)		+= efi-stdio.o
 obj-$(CONFIG_DRIVER_SERIAL_DIGIC)		+= serial_digic.o
 obj-$(CONFIG_DRIVER_SERIAL_LPUART)		+= serial_lpuart.o
+obj-$(CONFIG_MACH_LITEX)			+= serial_litex.o
drivers/serial/serial_litex.c new file +99 -0

99 lines not on this page · raw message

Signature · 7 lines
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#3 lore raw

Re: [RFC 2/4] serial: add litex UART driver

Quoted 21 lines · Antony Pavlov
---
 drivers/serial/Makefile       |  1 +
 drivers/serial/serial_litex.c | 99 +++++++++++++++++++++++++++++++++++
 2 files changed, 100 insertions(+)
drivers/serial/Makefile +1 -0
index 4174cc1ffb..fa86aa8c05 100644
@@ -23,3 +23,4 @@ obj-$(CONFIG_DRIVER_SERIAL_CADENCE)		+= serial_cadence.o
 obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO)		+= efi-stdio.o
 obj-$(CONFIG_DRIVER_SERIAL_DIGIC)		+= serial_digic.o
 obj-$(CONFIG_DRIVER_SERIAL_LPUART)		+= serial_lpuart.o
+obj-$(CONFIG_MACH_LITEX)			+= serial_litex.o
drivers/serial/serial_litex.c new file +0 -0
new file mode 100644
index 0000000000..4a23921ac7

drivers/serial/serial_litex.c line 1

Quoted 1 line
drivers/serial/serial_litex.c new file +1 -0
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.

Rest of the line is missing is here.

Quoted 4 lines
drivers/serial/serial_litex.c new file +4 -0
+/*
+ * Copyright (C) 2019 Antony Pavlov <[email protected]>
+ *
+ * This file is part of barebox.

drivers/serial/serial_litex.c line 15

Quoted 10 lines
drivers/serial/serial_litex.c new file +10 -0
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <io.h>
+
+#include <mach/debug_ll.h>

left-over header?

drivers/serial/serial_litex.c line 18

Quoted 3 lines
drivers/serial/serial_litex.c new file +3 -0
+
+static inline uint32_t litex_serial_readb(struct console_device *cdev,
+						uint32_t offset)

Not a problem here, but I find it strange to have a readb that returns uint32_t.

Quoted 34 lines
drivers/serial/serial_litex.c new file +34 -0
+{
+	void __iomem *base = cdev->dev->priv;
+
+	return readb(base + offset);
+}
+
+static inline void litex_serial_writeb(struct console_device *cdev,
+					uint32_t value, uint32_t offset)
+{
+	void __iomem *base = cdev->dev->priv;
+
+	writeb(value, base + offset);
+}
+
+static void litex_serial_putc(struct console_device *cdev, char c)
+{
+	while (litex_serial_readb(cdev, UART_TXFULL))
+		;
+
+	litex_serial_writeb(cdev, c, UART_RXTX);
+}
+
+static int litex_serial_getc(struct console_device *cdev)
+{
+	int c;
+
+	while (litex_serial_readb(cdev, UART_RXEMPTY))
+		;
+
+	c = litex_serial_readb(cdev, UART_RXTX);
+
+	/* refresh UART_RXEMPTY by writing UART_EV_RX to UART_EV_PENDING */
+	litex_serial_writeb(cdev, UART_EV_RX, UART_EV_PENDING);
+

drivers/serial/serial_litex.c line 62

Quoted 10 lines
drivers/serial/serial_litex.c new file +10 -0
+	return c;
+}
+
+static int litex_serial_tstc(struct console_device *cdev)
+{
+	if (litex_serial_readb(cdev, UART_RXEMPTY)) {
+		return 0;
+	}
+
+	return 1;

return !litex_serial_readb(cdev, UART_RXEMPTY)); ?

Quoted 38 lines
drivers/serial/serial_litex.c new file +37 -0
+}
+
+static int litex_serial_probe(struct device_d *dev)
+{
+	struct resource *iores;
+	struct console_device *cdev;
+
+	cdev = xzalloc(sizeof(struct console_device));
+	iores = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(iores))
+		return PTR_ERR(iores);
+	dev->priv = IOMEM(iores->start);
+	cdev->dev = dev;
+	cdev->tstc = &litex_serial_tstc;
+	cdev->putc = &litex_serial_putc;
+	cdev->getc = &litex_serial_getc;
+	cdev->setbrg = NULL;
+
+	console_register(cdev);
+
+	return 0;
+}
+
+static __maybe_unused struct of_device_id litex_serial_dt_ids[] = {
+	{
+		.compatible = "litex,uart",
+	}, {
+		/* sentinel */
+	}
+};
+
+static struct driver_d litex_serial_driver = {
+	.name  = "litex-uart",
+	.probe = litex_serial_probe,
+	.of_compatible = DRV_OF_COMPAT(litex_serial_dt_ids),
+};
+console_platform_driver(litex_serial_driver);
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#4 lore raw

Re: [RFC 2/4] serial: add litex UART driver

Quoted 12 lines · Ahmad Fatoum
Quoted 10 lines · Antony Pavlov
---
 drivers/serial/Makefile       |  1 +
 drivers/serial/serial_litex.c | 99 +++++++++++++++++++++++++++++++++++
 2 files changed, 100 insertions(+)
drivers/serial/Makefile +0 -0
index 4174cc1ffb..fa86aa8c05 100644
Quoted 4 lines

drivers/serial/Makefile

Quoted 2 lines
drivers/serial/Makefile +2 -0
+
+#include <mach/debug_ll.h>

left-over header?

Ah never mind, it's used for the register definitions.

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#5 lore raw

RFC 3/4 WIP: make it work on litex

In reply to Antony Pavlov

* litex platform does not use ns16550 at all

    so debug_ll_ns16550_init should be eliminated;

* there is no IH_ARCH_RISCV definition in include/image.h
at the moment, so the error stops compiling:
common/bootm.c: In function 'bootm_open_os_uimage':
common/bootm.c:491:34: error: 'IH_ARCH' undeclared (first use in this function)
if (data->os->header.ih_arch != IH_ARCH) {
^~~~~~~

---
 arch/riscv/boot/start.S | 2 --
 common/bootm.c          | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/riscv/boot/start.S +0 -2
index d1dbe48b7b..fab23e926f 100644
@@ -28,8 +28,6 @@
 
 .globl _start
 _start:
-	debug_ll_ns16550_init
-
 	riscv_nmon
 
 	li	sp, STACK_BASE + STACK_SIZE
common/bootm.c +2 -0
index 36f6c41bbd..37379ef03f 100644
@@ -487,11 +487,13 @@ static int bootm_open_os_uimage(struct image_data *data)
 
 	uimage_print_contents(data->os);
 
+#if 0
 	if (data->os->header.ih_arch != IH_ARCH) {
 		printf("Unsupported Architecture 0x%x\n",
 		       data->os->header.ih_arch);
 		return -EINVAL;
 	}
+#endif
 
 	if (data->os_address == UIMAGE_SOME_ADDRESS)
 		data->os_address = data->os->header.ih_load;
Signature · 7 lines
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#6 lore raw

Re: [RFC 3/4] WIP: make it work on litex

Quoted 10 lines · Antony Pavlov

* litex platform does not use ns16550 at all

    so debug_ll_ns16550_init should be eliminated;

* there is no IH_ARCH_RISCV definition in include/image.h
at the moment, so the error stops compiling:
common/bootm.c: In function 'bootm_open_os_uimage':
common/bootm.c:491:34: error: 'IH_ARCH' undeclared (first use in this function)
if (data->os->header.ih_arch != IH_ARCH) {
^~~~~~~

U-Boot has IH_ARCH_RISCV already, you can copy it there.

Quoted 12 lines
---
 arch/riscv/boot/start.S | 2 --
 common/bootm.c          | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/riscv/boot/start.S +0 -0
index d1dbe48b7b..fab23e926f 100644

arch/riscv/boot/start.S line 32

Quoted 5 lines
arch/riscv/boot/start.S +0 -2
@@ -28,8 +28,6 @@
 
 .globl _start
 _start:
-	debug_ll_ns16550_init
-

This should be done by board code.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#7 lore raw

RFC 4/4 riscv: add litex_defconfig

In reply to Antony Pavlov
---
 arch/riscv/configs/litex_defconfig | 45 ++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
arch/riscv/configs/litex_defconfig new file +45 -0
new file mode 100644
index 0000000000..cc8404e4b1
@@ -0,0 +1,45 @@
+CONFIG_MACH_LITEX=y
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="litex-generic"
+CONFIG_NMON=y
+CONFIG_NMON_HELP=y
+CONFIG_TEXT_BASE=0x40000000
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x400e0000
+CONFIG_STACK_SIZE=0x20000
+CONFIG_MALLOC_BASE=0x40100000
+CONFIG_MALLOC_SIZE=0x100000
+CONFIG_MALLOC_TLSF=y
+CONFIG_PANIC_HANG=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_POLLER=y
+CONFIG_DEBUG_LL=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_BOOTM is not set
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_CMP=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_OFDEVICE=y
+# CONFIG_SPI is not set
+CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_PINCTRL is not set
+CONFIG_DIGEST_CRC32_GENERIC=y
Signature · 7 lines
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#8 lore raw
In reply to Antony Pavlov

Hi Antony

Nice patch series, thanks for sharing.

Quoted 14 lines · Antony Pavlov

This RFC patchseries adds initial LiteX RISC-V SoC support for barebox.

You can obtain this patchseries from github:

    $ git clone -b 20190602.litex https://github.com/frantony/barebox

LiteX is a Migen-based System on Chip [1], supporting softcore VexRiscv CPU,
a 32-bits Linux Capable RISC-V CPU [2].

All the components used to create the LiteX SoC are open-source and the flexibility of Spinal HDL/Migen allow targeting easily very various FPGA devices/boards: Lattice, Altera, Xilinx, Microsemi FPGAs with SDRAM/DDR/DDR2/DDR3/DDR4 RAMs, RMII/MII/RGMII/1000BASE-X Ethernet PHYs.

Quoted 6 lines

The LiteX SoC with VexRiscv CPU can be deployed on e.g. Digilent ARTY board [3] or Terasic DE0-Nano board [4].

You can boot barebox from serial port using flterm [5]:, e.g.:

flterm --port /dev/ttyUSB0 --kernel <path_to_barebox.bin> --kernel-adr 0x40000000

Can you be persuaded to include the above in a .rst file in Documentation, so others can find this info later?

Sam

Quoted 41 lines

TODO
====

* add pbl support for riscv barebox;
* add liteeth Ethernet core support [6] (tip: use ARTY board);
* fix issues (see the WIP commit);
* use barebox to start linux [2] and zephyr [7].

REFERENCES
==========

[1] https://github.com/enjoy-digital/litex
[2] https://github.com/enjoy-digital/linux-on-litex-vexriscv
[3] https://store.digilentinc.com/arty-a7-artix-7-fpga-development-board-for-makers-and-hobbyists/
[4] http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=593
[5] https://github.com/timvideos/flterm
[6] https://github.com/enjoy-digital/liteeth
[7] https://github.com/zephyrproject-rtos/zephyr/tree/master/boards/riscv32/litex_vexriscv

Antony Pavlov (4):
riscv: add initial LiteX SoC support
serial: add litex UART driver
WIP: make it work on litex
riscv: add litex_defconfig

 arch/riscv/Kconfig                            |   6 +
 arch/riscv/Makefile                           |   1 +
 arch/riscv/boot/start.S                       |   2 -
 arch/riscv/configs/litex_defconfig            |  45 +++++++
 arch/riscv/dts/litex-generic.dts              |  17 +++
 arch/riscv/dts/litex.dtsi                     |  36 +++++
 arch/riscv/mach-litex/Kconfig                 |  11 ++
 arch/riscv/mach-litex/Makefile                |   3 +
 arch/riscv/mach-litex/include/mach/debug_ll.h | 124 ++++++++++++++++++
 common/bootm.c                                |   2 +
 drivers/serial/Makefile                       |   1 +
 drivers/serial/serial_litex.c                 |  99 ++++++++++++++
Quoted 17 lines
 12 files changed, 345 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/configs/litex_defconfig
 create mode 100644 arch/riscv/dts/litex-generic.dts
 create mode 100644 arch/riscv/dts/litex.dtsi
 create mode 100644 arch/riscv/mach-litex/Kconfig
 create mode 100644 arch/riscv/mach-litex/Makefile
 create mode 100644 arch/riscv/mach-litex/include/mach/debug_ll.h
 create mode 100644 drivers/serial/serial_litex.c
Signature · 7 lines
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox