Skip to contentSkip to conversation

RMRR related fixes and enhancements

PATCH Applied Eric Auger 2 participants 9 messages Jun 3, 2019 – Jun 12, 2019 IOMMU

lore
Share & tools
lore

Eric Auger

author
#0 lore raw

v6 cover RMRR related fixes and enhancements

Currently the Intel reserved region is attached to the RMRR unit and when building the list of RMRR seen by a device we link this unique reserved region without taking care of potential multiple usage of this reserved region by several devices.

Also while reading the vtd spec it is unclear to me whether the RMRR device scope referenced by an RMRR ACPI struct could be a PCI-PCI bridge, in which case I think we also need to check the device belongs to the PCI sub-hierarchy of the device referenced in the scope. This would be true for device_has_rmrr() and intel_iommu_get_resv_regions().

Last, the VFIO subsystem would need to compute the usable IOVA range by querying the iommu_get_group_resv_regions() API. This would allow, for instance, to report potential conflicts between the guest physical address space and host reserved regions.

However iommu_get_group_resv_regions() currently fails to differentiate RMRRs that are known safe for device assignment and RMRRs that must be enforced. So we introduce a new reserved memory region type (relaxable), reported when associated to an USB or GFX device. The last 2 patches aim at unblocking [1] which is stuck since 4.18.

[1-5] are fixes
[6-7] are enhancements

The two parts can be considered separately if needed.

References:
[1] [PATCH v6 0/7] vfio/type1: Add support for valid iova list management

    https://patchwork.kernel.org/patch/10425309/

Branch: This series is available at:
https://github.com/eauger/linux/tree/v5.2-rc2-rmrr-v6

History:

v5 -> v6:
- Collected Lu's R-b
- fix 2 kerneldoc comments
- dmar_global_lock down_read/up_read instead of write

v4 -> v5:
- remove iommu: Pass a GFP flag parameter to iommu_alloc_resv_region()
- use dmar_global_lock instead of rcu-lock in intel_iommu_get_resv_regions

v3 -> v4:
- added "iommu: Fix a leak in iommu_insert_resv_region"
- introduced device_rmrr_is_relaxable and fixed to_pci_dev call without checking dev_is_pci
- Despite Robin suggested to hide direct relaxable behind direct ones, I think this would lead to a very complex implementation of iommu_insert_resv_region while in general the relaxable regions are going to be ignored by the caller. By the way I found a leak in this function, hence the new first patch

v2 -> v3:
- s/||/&& in iommu_group_create_direct_mappings

v1 -> v2:
- introduce is_downstream_to_pci_bridge() in a separate patch, change param names and add kerneldoc comment
- add 6,7

Eric Auger (7):
iommu: Fix a leak in iommu_insert_resv_region
iommu/vt-d: Duplicate iommu_resv_region objects per device list iommu/vt-d: Introduce is_downstream_to_pci_bridge helper iommu/vt-d: Handle RMRR with PCI bridge device scopes iommu/vt-d: Handle PCI bridge RMRR device scopes in
intel_iommu_get_resv_regions
iommu: Introduce IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions iommu/vt-d: Differentiate relaxable and non relaxable RMRRs

 .../ABI/testing/sysfs-kernel-iommu_groups     |   9 ++
 drivers/iommu/intel-iommu.c                   | 127 ++++++++++++------
 drivers/iommu/iommu.c                         |  20 +--
 include/linux/iommu.h                         |   6 +
 4 files changed, 114 insertions(+), 48 deletions(-)
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH v6 1/7 iommu: Fix a leak in iommu_insert_resv_region

In case we expand an existing region, we unlink this latter and insert the larger one. In that case we should free the original region after the insertion. Also we can immediately return.

Fixes 6c65fb318e8b ("iommu: iommu_get_group_resv_regions")
---
 drivers/iommu/iommu.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/iommu/iommu.c +5 -3
index 67ee6623f9b2..f961f71e4ff8 100644
@@ -237,18 +237,21 @@ static int iommu_insert_resv_region(struct iommu_resv_region *new,
 			pos = pos->next;
 		} else if ((start >= a) && (end <= b)) {
 			if (new->type == type)
-				goto done;
+				return 0;
 			else
 				pos = pos->next;
 		} else {
 			if (new->type == type) {
 				phys_addr_t new_start = min(a, start);
 				phys_addr_t new_end = max(b, end);
+				int ret;
 
 				list_del(&entry->list);
 				entry->start = new_start;
 				entry->length = new_end - new_start + 1;
-				iommu_insert_resv_region(entry, regions);
+				ret = iommu_insert_resv_region(entry, regions);
+				kfree(entry);
+				return ret;
 			} else {
 				pos = pos->next;
 			}
@@ -261,7 +264,6 @@ static int iommu_insert_resv_region(struct iommu_resv_region *new,
 		return -ENOMEM;
 
 	list_add_tail(&region->list, pos);
-done:
 	return 0;
 }
 
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author
#2 lore raw

PATCH v6 2/7 iommu/vt-d: Duplicate iommu_resv_region objects per device list

In reply to Eric Auger

intel_iommu_get_resv_regions() aims to return the list of reserved regions accessible by a given @device. However several devices can access the same reserved memory region and when building the list it is not safe to use a single iommu_resv_region object, whose container is the RMRR. This iommu_resv_region must be duplicated per device reserved region list.

Let's remove the struct iommu_resv_region from the RMRR unit and allocate the iommu_resv_region directly in intel_iommu_get_resv_regions(). We hold the dmar_global_lock instead of the rcu-lock to allow sleeping.

Fixes 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks")

---
v5 -> v6:
- added space between | operands
- dmar_global_lock down_read/up_read instead of write
- added Lu's R-b

v4 -> v5
- replace rcu-lock by the dmar_global_lock

---
 drivers/iommu/intel-iommu.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
drivers/iommu/intel-iommu.c +17 -17
index a209199f3af6..4dc012966964 100644
@@ -322,7 +322,6 @@ struct dmar_rmrr_unit {
 	u64	end_address;		/* reserved end address */
 	struct dmar_dev_scope *devices;	/* target devices */
 	int	devices_cnt;		/* target device count */
-	struct iommu_resv_region *resv; /* reserved region handle */
 };
 
 struct dmar_atsr_unit {
@@ -4205,7 +4204,6 @@ static inline void init_iommu_pm_ops(void) {}
 int __init dmar_parse_one_rmrr(struct acpi_dmar_header *header, void *arg)
 {
 	struct acpi_dmar_reserved_memory *rmrr;
-	int prot = DMA_PTE_READ|DMA_PTE_WRITE;
 	struct dmar_rmrr_unit *rmrru;
 	size_t length;
 
@@ -4219,22 +4217,16 @@ int __init dmar_parse_one_rmrr(struct acpi_dmar_header *header, void *arg)
 	rmrru->end_address = rmrr->end_address;
 
 	length = rmrr->end_address - rmrr->base_address + 1;
-	rmrru->resv = iommu_alloc_resv_region(rmrr->base_address, length, prot,
-					      IOMMU_RESV_DIRECT);
-	if (!rmrru->resv)
-		goto free_rmrru;
 
 	rmrru->devices = dmar_alloc_dev_scope((void *)(rmrr + 1),
 				((void *)rmrr) + rmrr->header.length,
 				&rmrru->devices_cnt);
 	if (rmrru->devices_cnt && rmrru->devices == NULL)
-		goto free_all;
+		goto free_rmrru;
 
 	list_add(&rmrru->list, &dmar_rmrr_units);
 
 	return 0;
-free_all:
-	kfree(rmrru->resv);
 free_rmrru:
 	kfree(rmrru);
 out:
@@ -4452,7 +4444,6 @@ static void intel_iommu_free_dmars(void)
 	list_for_each_entry_safe(rmrru, rmrr_n, &dmar_rmrr_units, list) {
 		list_del(&rmrru->list);
 		dmar_free_dev_scope(&rmrru->devices, &rmrru->devices_cnt);
-		kfree(rmrru->resv);
 		kfree(rmrru);
 	}
 
@@ -5470,22 +5461,33 @@ static void intel_iommu_remove_device(struct device *dev)
 static void intel_iommu_get_resv_regions(struct device *device,
 					 struct list_head *head)
 {
+	int prot = DMA_PTE_READ | DMA_PTE_WRITE;
 	struct iommu_resv_region *reg;
 	struct dmar_rmrr_unit *rmrr;
 	struct device *i_dev;
 	int i;
 
-	rcu_read_lock();
+	down_read(&dmar_global_lock);
 	for_each_rmrr_units(rmrr) {
 		for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
 					  i, i_dev) {
+			struct iommu_resv_region *resv;
+			size_t length;
+
 			if (i_dev != device)
 				continue;
 
-			list_add_tail(&rmrr->resv->list, head);
+			length = rmrr->end_address - rmrr->base_address + 1;
+			resv = iommu_alloc_resv_region(rmrr->base_address,
+						       length, prot,
+						       IOMMU_RESV_DIRECT);
+			if (!resv)
+				break;
+
+			list_add_tail(&resv->list, head);
 		}
 	}
-	rcu_read_unlock();
+	up_read(&dmar_global_lock);
 
 	reg = iommu_alloc_resv_region(IOAPIC_RANGE_START,
 				      IOAPIC_RANGE_END - IOAPIC_RANGE_START + 1,
@@ -5500,10 +5502,8 @@ static void intel_iommu_put_resv_regions(struct device *dev,
 {
 	struct iommu_resv_region *entry, *next;
 
-	list_for_each_entry_safe(entry, next, head, list) {
-		if (entry->type == IOMMU_RESV_MSI)
-			kfree(entry);
-	}
+	list_for_each_entry_safe(entry, next, head, list)
+		kfree(entry);
 }
 
 int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct device *dev)
Signature · 1 line
2.20.1
author
#3 lore raw

PATCH v6 3/7 iommu/vt-d: Introduce is_downstream_to_pci_bridge helper

In reply to Eric Auger

Several call sites are about to check whether a device belongs to the PCI sub-hierarchy of a candidate PCI-PCI bridge. Introduce an helper to perform that check.

---

v5 -> v6:
- fix kerneldoc comment as suggested by Christoph
- added Lu's R-b

---
 drivers/iommu/intel-iommu.c | 37 +++++++++++++++++++++++++++++--------
 1 file changed, 29 insertions(+), 8 deletions(-)
drivers/iommu/intel-iommu.c +29 -8
index 4dc012966964..bcef10328879 100644
@@ -736,12 +736,39 @@ static int iommu_dummy(struct device *dev)
 	return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
 }
 
+/**
+ * is_downstream_to_pci_bridge - test if a device belongs to the PCI
+ *				 sub-hierarchy of a candidate PCI-PCI bridge
+ * @dev: candidate PCI device belonging to @bridge PCI sub-hierarchy
+ * @bridge: the candidate PCI-PCI bridge
+ *
+ * Return: true if @dev belongs to @bridge PCI sub-hierarchy, else false.
+ */
+static bool
+is_downstream_to_pci_bridge(struct device *dev, struct device *bridge)
+{
+	struct pci_dev *pdev, *pbridge;
+
+	if (!dev_is_pci(dev) || !dev_is_pci(bridge))
+		return false;
+
+	pdev = to_pci_dev(dev);
+	pbridge = to_pci_dev(bridge);
+
+	if (pbridge->subordinate &&
+	    pbridge->subordinate->number <= pdev->bus->number &&
+	    pbridge->subordinate->busn_res.end >= pdev->bus->number)
+		return true;
+
+	return false;
+}
+
 static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn)
 {
 	struct dmar_drhd_unit *drhd = NULL;
 	struct intel_iommu *iommu;
 	struct device *tmp;
-	struct pci_dev *ptmp, *pdev = NULL;
+	struct pci_dev *pdev = NULL;
 	u16 segment = 0;
 	int i;
 
@@ -787,13 +814,7 @@ static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devf
 				goto out;
 			}
 
-			if (!pdev || !dev_is_pci(tmp))
-				continue;
-
-			ptmp = to_pci_dev(tmp);
-			if (ptmp->subordinate &&
-			    ptmp->subordinate->number <= pdev->bus->number &&
-			    ptmp->subordinate->busn_res.end >= pdev->bus->number)
+			if (is_downstream_to_pci_bridge(dev, tmp))
 				goto got_pdev;
 		}
 
Signature · 1 line
2.20.1
author
#4 lore raw

PATCH v6 4/7 iommu/vt-d: Handle RMRR with PCI bridge device scopes

In reply to Eric Auger

When reading the vtd specification and especially the Reserved Memory Region Reporting Structure chapter, it is not obvious a device scope element cannot be a PCI-PCI bridge, in which case all downstream ports are likely to access the reserved memory region. Let's handle this case in device_has_rmrr.

Fixes ea2447f700ca ("intel-iommu: Prevent devices with RMRRs from being placed into SI Domain")

---

v5 -> v6:
- added Lu's R-b

v1 -> v2:
- is_downstream_to_pci_bridge helper introduced in a separate patch

---
 drivers/iommu/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +2 -1
index bcef10328879..346103ce16d3 100644
@@ -2910,7 +2910,8 @@ static bool device_has_rmrr(struct device *dev)
 		 */
 		for_each_active_dev_scope(rmrr->devices,
 					  rmrr->devices_cnt, i, tmp)
-			if (tmp == dev) {
+			if (tmp == dev ||
+			    is_downstream_to_pci_bridge(dev, tmp)) {
 				rcu_read_unlock();
 				return true;
 			}
Signature · 1 line
2.20.1
author
#5 lore raw

PATCH v6 5/7 iommu/vt-d: Handle PCI bridge RMRR device scopes in intel_iommu_get_resv_regions

In reply to Eric Auger

In the case the RMRR device scope is a PCI-PCI bridge, let's check the device belongs to the PCI sub-hierarchy.

Fixes 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks")

---

v5 -> v6:
- Added Lu's R-b

---
 drivers/iommu/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +2 -1
index 346103ce16d3..eed7ac206777 100644
@@ -5496,7 +5496,8 @@ static void intel_iommu_get_resv_regions(struct device *device,
 			struct iommu_resv_region *resv;
 			size_t length;
 
-			if (i_dev != device)
+			if (i_dev != device &&
+			    !is_downstream_to_pci_bridge(device, i_dev))
 				continue;
 
 			length = rmrr->end_address - rmrr->base_address + 1;
Signature · 1 line
2.20.1
author
#6 lore raw

PATCH v6 6/7 iommu: Introduce IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions

In reply to Eric Auger

Introduce a new type for reserved region. This corresponds to directly mapped regions which are known to be relaxable in some specific conditions, such as device assignment use case. Well known examples are those used by USB controllers providing PS/2 keyboard emulation for pre-boot BIOS and early BOOT or RMRRs associated to IGD working in legacy mode.

Since commit c875d2c1b808 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API domains") and commit 18436afdc11a ("iommu/vt-d: Allow RMRR on graphics devices too"), those regions are currently considered "safe" with respect to device assignment use case which requires a non direct mapping at IOMMU physical level (RAM GPA -> HPA mapping).

Those RMRRs currently exist and sometimes the device is attempting to access it but this has not been considered an issue until now.

However at the moment, iommu_get_group_resv_regions() is not able to make any difference between directly mapped
regions: those which must be absolutely enforced and those like above ones which are known as relaxable.

This is a blocker for reporting severe conflicts between non relaxable RMRRs (like MSI doorbells) and guest GPA space.

With this new reserved region type we will be able to use iommu_get_group_resv_regions() to enumerate the IOVA space that is usable through the IOMMU API without introducing regressions with respect to existing device assignment use cases (USB and IGD).

---

v3 -> v4:
- expose the relaxable regions as "direct-relaxable" in the sysfs
- update ABI documentation

v2 -> v3:
- fix direct type check

---
 Documentation/ABI/testing/sysfs-kernel-iommu_groups |  9 +++++++++
 drivers/iommu/iommu.c                               | 12 +++++++-----
 include/linux/iommu.h                               |  6 ++++++
 3 files changed, 22 insertions(+), 5 deletions(-)
Documentation/ABI/testing/sysfs-kernel-iommu_groups +9 -0
index 35c64e00b35c..017f5bc3920c 100644
@@ -24,3 +24,12 @@ Description:    /sys/kernel/iommu_groups/reserved_regions list IOVA
 		region is described on a single line: the 1st field is
 		the base IOVA, the second is the end IOVA and the third
 		field describes the type of the region.
+
+What:		/sys/kernel/iommu_groups/reserved_regions
+Date: 		June 2019
+KernelVersion:  v5.3
+Contact: 	Eric Auger <[email protected]>
+Description:    In case an RMRR is used only by graphics or USB devices
+		it is now exposed as "direct-relaxable" instead of "direct".
+		In device assignment use case, for instance, those RMRR
+		are considered to be relaxable and safe.
drivers/iommu/iommu.c +7 -5
index f961f71e4ff8..276eae9822f2 100644
@@ -73,10 +73,11 @@ struct iommu_group_attribute {
 };
 
 static const char * const iommu_group_resv_type_string[] = {
-	[IOMMU_RESV_DIRECT]	= "direct",
-	[IOMMU_RESV_RESERVED]	= "reserved",
-	[IOMMU_RESV_MSI]	= "msi",
-	[IOMMU_RESV_SW_MSI]	= "msi",
+	[IOMMU_RESV_DIRECT]			= "direct",
+	[IOMMU_RESV_DIRECT_RELAXABLE]		= "direct-relaxable",
+	[IOMMU_RESV_RESERVED]			= "reserved",
+	[IOMMU_RESV_MSI]			= "msi",
+	[IOMMU_RESV_SW_MSI]			= "msi",
 };
 
 #define IOMMU_GROUP_ATTR(_name, _mode, _show, _store)		\
@@ -575,7 +576,8 @@ static int iommu_group_create_direct_mappings(struct iommu_group *group,
 		start = ALIGN(entry->start, pg_size);
 		end   = ALIGN(entry->start + entry->length, pg_size);
 
-		if (entry->type != IOMMU_RESV_DIRECT)
+		if (entry->type != IOMMU_RESV_DIRECT &&
+		    entry->type != IOMMU_RESV_DIRECT_RELAXABLE)
 			continue;
 
 		for (addr = start; addr < end; addr += pg_size) {
include/linux/iommu.h +6 -0
index a815cf6f6f47..d7d1c8de9bbc 100644
@@ -135,6 +135,12 @@ enum iommu_attr {
 enum iommu_resv_type {
 	/* Memory regions which must be mapped 1:1 at all times */
 	IOMMU_RESV_DIRECT,
+	/*
+	 * Memory regions which are advertised to be 1:1 but are
+	 * commonly considered relaxable in some conditions,
+	 * for instance in device assignment use case (USB, Graphics)
+	 */
+	IOMMU_RESV_DIRECT_RELAXABLE,
 	/* Arbitrary "never map this or give it to a device" address ranges */
 	IOMMU_RESV_RESERVED,
 	/* Hardware MSI region (untranslated) */
Signature · 1 line
2.20.1
author
#7 lore raw

PATCH v6 7/7 iommu/vt-d: Differentiate relaxable and non relaxable RMRRs

In reply to Eric Auger

Now we have a new IOMMU_RESV_DIRECT_RELAXABLE reserved memory region type, let's report USB and GFX RMRRs as relaxable ones.

We introduce a new device_rmrr_is_relaxable() helper to check whether the rmrr belongs to the relaxable category.

This allows to have a finer reporting at IOMMU API level of reserved memory regions. This will be exploitable by VFIO to define the usable IOVA range and detect potential conflicts between the guest physical address space and host reserved regions.

---

v5 -> v6:
- added Lu's R-b
- minor change in the kerneldoc comment

v3 -> v4:
- introduce device_rmrr_is_relaxable and reshuffle the comments

---
 drivers/iommu/intel-iommu.c | 54 ++++++++++++++++++++++++++-----------
 1 file changed, 39 insertions(+), 15 deletions(-)
drivers/iommu/intel-iommu.c +39 -15
index eed7ac206777..a5cca85d8e19 100644
@@ -2920,6 +2920,35 @@ static bool device_has_rmrr(struct device *dev)
 	return false;
 }
 
+/**
+ * device_rmrr_is_relaxable - Test whether the RMRR of this device
+ * is relaxable (ie. is allowed to be not enforced under some conditions)
+ * @dev: device handle
+ *
+ * We assume that PCI USB devices with RMRRs have them largely
+ * for historical reasons and that the RMRR space is not actively used post
+ * boot.  This exclusion may change if vendors begin to abuse it.
+ *
+ * The same exception is made for graphics devices, with the requirement that
+ * any use of the RMRR regions will be torn down before assigning the device
+ * to a guest.
+ *
+ * Return: true if the RMRR is relaxable, false otherwise
+ */
+static bool device_rmrr_is_relaxable(struct device *dev)
+{
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(dev))
+		return false;
+
+	pdev = to_pci_dev(dev);
+	if (IS_USB_DEVICE(pdev) || IS_GFX_DEVICE(pdev))
+		return true;
+	else
+		return false;
+}
+
 /*
  * There are a couple cases where we need to restrict the functionality of
  * devices associated with RMRRs.  The first is when evaluating a device for
@@ -2934,25 +2963,16 @@ static bool device_has_rmrr(struct device *dev)
  * We therefore prevent devices associated with an RMRR from participating in
  * the IOMMU API, which eliminates them from device assignment.
  *
- * In both cases we assume that PCI USB devices with RMRRs have them largely
- * for historical reasons and that the RMRR space is not actively used post
- * boot.  This exclusion may change if vendors begin to abuse it.
- *
- * The same exception is made for graphics devices, with the requirement that
- * any use of the RMRR regions will be torn down before assigning the device
- * to a guest.
+ * In both cases, devices which have relaxable RMRRs are not concerned by this
+ * restriction. See device_rmrr_is_relaxable comment.
  */
 static bool device_is_rmrr_locked(struct device *dev)
 {
 	if (!device_has_rmrr(dev))
 		return false;
 
-	if (dev_is_pci(dev)) {
-		struct pci_dev *pdev = to_pci_dev(dev);
-
-		if (IS_USB_DEVICE(pdev) || IS_GFX_DEVICE(pdev))
-			return false;
-	}
+	if (device_rmrr_is_relaxable(dev))
+		return false;
 
 	return true;
 }
@@ -5494,6 +5514,7 @@ static void intel_iommu_get_resv_regions(struct device *device,
 		for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
 					  i, i_dev) {
 			struct iommu_resv_region *resv;
+			enum iommu_resv_type type;
 			size_t length;
 
 			if (i_dev != device &&
@@ -5501,9 +5522,12 @@ static void intel_iommu_get_resv_regions(struct device *device,
 				continue;
 
 			length = rmrr->end_address - rmrr->base_address + 1;
+
+			type = device_rmrr_is_relaxable(device) ?
+				IOMMU_RESV_DIRECT_RELAXABLE : IOMMU_RESV_DIRECT;
+
 			resv = iommu_alloc_resv_region(rmrr->base_address,
-						       length, prot,
-						       IOMMU_RESV_DIRECT);
+						       length, prot, type);
 			if (!resv)
 				break;
 
Signature · 1 line
2.20.1
maintainer Applied
#8 lore raw
In reply to Eric Auger
Quoted 9 lines · Eric Auger

Eric Auger (7):
iommu: Fix a leak in iommu_insert_resv_region
iommu/vt-d: Duplicate iommu_resv_region objects per device list iommu/vt-d: Introduce is_downstream_to_pci_bridge helper iommu/vt-d: Handle RMRR with PCI bridge device scopes iommu/vt-d: Handle PCI bridge RMRR device scopes in
intel_iommu_get_resv_regions
iommu: Introduce IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions iommu/vt-d: Differentiate relaxable and non relaxable RMRRs

Applied, thanks.