Skip to contentSkip to conversation

clocksource/arm_arch_timer: mark arch_counter_get_* as notrace

PATCH In review Anders Roxell 3 participants 3 messages Jun 3, 2019 – Jun 4, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 clocksource/arm_arch_timer: mark arch_counter_get_* as notrace

When CONFIG_FUNCTION_GRAPH_TRACER is enabled we end up in this circular call trace since function arch_counter_get_cntvct() isn't marked with no trace:

[   17.914934] Call trace:
[   17.915211]  ftrace_return_to_handler+0x194/0x288
[   17.915551]  return_to_handler+0x1c/0x38
[   17.915855]  trace_clock_local+0x38/0x88
[   17.916159]  function_graph_enter+0xf0/0x258
[   17.916465]  prepare_ftrace_return+0x60/0x90
[   17.916772]  ftrace_graph_caller+0x1c/0x24
[   17.917093]  arch_counter_get_cntvct+0x10/0x30
[   17.917417]  sched_clock+0x70/0x218
[   17.917723]  trace_clock_local+0x38/0x88
[   17.918026]  function_graph_enter+0xf0/0x258
[   17.918332]  prepare_ftrace_return+0x60/0x90
[   17.918649]  ftrace_graph_caller+0x1c/0x24
[   17.918963]  arch_counter_get_cntvct+0x10/0x30
[   17.919286]  sched_clock+0x70/0x218

Rework so that function arch_counter_get_cntvct() is marked with notrace.

Fixes 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")
---
 drivers/clocksource/arm_arch_timer.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/clocksource/arm_arch_timer.c +5 -5
index b2a951a798e2..f4d5bd8fe906 100644
@@ -149,22 +149,22 @@ u32 arch_timer_reg_read(int access, enum arch_timer_reg reg,
 	return val;
 }
 
-static u64 arch_counter_get_cntpct_stable(void)
+static u64 notrace arch_counter_get_cntpct_stable(void)
 {
 	return __arch_counter_get_cntpct_stable();
 }
 
-static u64 arch_counter_get_cntpct(void)
+static u64 notrace arch_counter_get_cntpct(void)
 {
 	return __arch_counter_get_cntpct();
 }
 
-static u64 arch_counter_get_cntvct_stable(void)
+static u64 notrace arch_counter_get_cntvct_stable(void)
 {
 	return __arch_counter_get_cntvct_stable();
 }
 
-static u64 arch_counter_get_cntvct(void)
+static u64 notrace arch_counter_get_cntvct(void)
 {
 	return __arch_counter_get_cntvct();
 }
@@ -947,7 +947,7 @@ bool arch_timer_evtstrm_available(void)
 	return cpumask_test_cpu(raw_smp_processor_id(), &evtstrm_available);
 }
 
-static u64 arch_counter_get_cntvct_mem(void)
+static u64 notrace arch_counter_get_cntvct_mem(void)
 {
 	u32 vct_lo, vct_hi, tmp_hi;
 
Signature · 7 lines
2.20.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

Hi Anders,

Quoted 20 lines · Anders Roxell

When CONFIG_FUNCTION_GRAPH_TRACER is enabled we end up in this circular call trace since function arch_counter_get_cntvct() isn't marked with no trace:

[   17.914934] Call trace:
[   17.915211]  ftrace_return_to_handler+0x194/0x288
[   17.915551]  return_to_handler+0x1c/0x38
[   17.915855]  trace_clock_local+0x38/0x88
[   17.916159]  function_graph_enter+0xf0/0x258
[   17.916465]  prepare_ftrace_return+0x60/0x90
[   17.916772]  ftrace_graph_caller+0x1c/0x24
[   17.917093]  arch_counter_get_cntvct+0x10/0x30
[   17.917417]  sched_clock+0x70/0x218
[   17.917723]  trace_clock_local+0x38/0x88
[   17.918026]  function_graph_enter+0xf0/0x258
[   17.918332]  prepare_ftrace_return+0x60/0x90
[   17.918649]  ftrace_graph_caller+0x1c/0x24
[   17.918963]  arch_counter_get_cntvct+0x10/0x30
[   17.919286]  sched_clock+0x70/0x218
Quoted 4 lines

Rework so that function arch_counter_get_cntvct() is marked with notrace.

Fixes 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")

This has already been queued by Daniel, I believe [1].

[1] https://lore.kernel.org/lkml/[email protected]/

Thanks,

	M.
Signature · 1 line
Jazz is not dead. It just smells funny...
#2 lore raw

Hi Anders,

thanks for your patch. As mentioned by Mark I already applied this fix from Julien Thierry.

-- Daniel

Quoted 32 lines · Marc Zyngier

Hi Anders,

Quoted 20 lines · Anders Roxell

When CONFIG_FUNCTION_GRAPH_TRACER is enabled we end up in this circular call trace since function arch_counter_get_cntvct() isn't marked with no trace:

[   17.914934] Call trace:
[   17.915211]  ftrace_return_to_handler+0x194/0x288
[   17.915551]  return_to_handler+0x1c/0x38
[   17.915855]  trace_clock_local+0x38/0x88
[   17.916159]  function_graph_enter+0xf0/0x258
[   17.916465]  prepare_ftrace_return+0x60/0x90
[   17.916772]  ftrace_graph_caller+0x1c/0x24
[   17.917093]  arch_counter_get_cntvct+0x10/0x30
[   17.917417]  sched_clock+0x70/0x218
[   17.917723]  trace_clock_local+0x38/0x88
[   17.918026]  function_graph_enter+0xf0/0x258
[   17.918332]  prepare_ftrace_return+0x60/0x90
[   17.918649]  ftrace_graph_caller+0x1c/0x24
[   17.918963]  arch_counter_get_cntvct+0x10/0x30
[   17.919286]  sched_clock+0x70/0x218
Quoted 4 lines

Rework so that function arch_counter_get_cntvct() is marked with notrace.

Fixes 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")

This has already been queued by Daniel, I believe [1].

[1] https://lore.kernel.org/lkml/[email protected]/

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog