Skip to contentSkip to conversation

dmaengine: fsl-qdma: fixed the source/destination descriptor format

PATCH Applied Peng Ma 2 participants 4 messages May 22, 2019 – Jun 4, 2019 dmaengine

lore
Share & tools
lore

Peng Ma

author
#0 lore raw

PATCH v3 1/2 dmaengine: fsl-qdma: fixed the source/destination descriptor format

CMD of Source/Destination descriptor format should be lower of struct fsl_qdma_engine number data address.

---
changed for V3:
- Delete macro to simplify code.

 drivers/dma/fsl-qdma.c |   18 ++++++++++--------
 1 files changed, 10 insertions(+), 8 deletions(-)
drivers/dma/fsl-qdma.c +10 -8
index aa1d0ae..da8fdf5 100644
@@ -113,6 +113,7 @@
 /* Field definition for Descriptor offset */
 #define QDMA_CCDF_STATUS		20
 #define QDMA_CCDF_OFFSET		20
+#define QDMA_SDDF_CMD(x)		(((u64)(x)) << 32)
 
 /* Field definition for safe loop count*/
 #define FSL_QDMA_HALT_COUNT		1500
@@ -341,6 +342,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan *chan)
 static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
 				      dma_addr_t dst, dma_addr_t src, u32 len)
 {
+	u32 cmd;
 	struct fsl_qdma_format *sdf, *ddf;
 	struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;
 
@@ -369,14 +371,14 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
 	/* This entry is the last entry. */
 	qdma_csgf_set_f(csgf_dest, len);
 	/* Descriptor Buffer */
-	sdf->data =
-		cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
-			    FSL_QDMA_CMD_RWTTYPE_OFFSET);
-	ddf->data =
-		cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
-			    FSL_QDMA_CMD_RWTTYPE_OFFSET);
-	ddf->data |=
-		cpu_to_le64(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
+	cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
+			  FSL_QDMA_CMD_RWTTYPE_OFFSET);
+	sdf->data = QDMA_SDDF_CMD(cmd);
+
+	cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
+			  FSL_QDMA_CMD_RWTTYPE_OFFSET);
+	cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
+	ddf->data = QDMA_SDDF_CMD(cmd);
 }
 
 /*
Signature · 1 line
1.7.1
author
#1 lore raw

PATCH v3 2/2 dmaengine: fsl-qdma: Add improvement

When an error occurs we should clean the error register then to return

---
changed for V3:
- no changed.

 drivers/dma/fsl-qdma.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)
drivers/dma/fsl-qdma.c +1 -3
index da8fdf5..8e341c0 100644
@@ -703,10 +703,8 @@ static irqreturn_t fsl_qdma_error_handler(int irq, void *dev_id)
 
 	intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
 
-	if (intr) {
+	if (intr)
 		dev_err(fsl_qdma->dma_dev.dev, "DMA transaction error!\n");
-		return IRQ_NONE;
-	}
 
 	qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status + FSL_QDMA_DEDR);
 	return IRQ_HANDLED;
Signature · 1 line
1.7.1
maintainer
#2 lore raw

Re: [V3 2/2] dmaengine: fsl-qdma: Add improvement

Quoted 1 line · Peng Ma

When an error occurs we should clean the error register then to return

The patch title is supposed to tell us about the change. "Add
improvement: is a very generic term!

I have change title to "Continue to clear register on error" and applied

Quoted 27 lines

---
changed for V3:
- no changed.

 drivers/dma/fsl-qdma.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)
drivers/dma/fsl-qdma.c +1 -3
index da8fdf5..8e341c0 100644
@@ -703,10 +703,8 @@ static irqreturn_t fsl_qdma_error_handler(int irq, void *dev_id)
 
 	intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
 
-	if (intr) {
+	if (intr)
 		dev_err(fsl_qdma->dma_dev.dev, "DMA transaction error!\n");
-		return IRQ_NONE;
-	}
 
 	qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status + FSL_QDMA_DEDR);
 	return IRQ_HANDLED;
Signature · 1 line
1.7.1
Signature · 1 line
~Vinod
maintainer Applied
#3 lore raw
In reply to Peng Ma
Quoted 2 lines · Peng Ma

CMD of Source/Destination descriptor format should be lower of struct fsl_qdma_engine number data address.

Applied, thanks

Signature · 1 line
~Vinod