Skip to contentSkip to conversation

tc358767 driver improvements

PATCH Superseded Andrey Smirnov 2 participants 26 messages Jun 5, 2019 – Jun 6, 2019

Subsystems (3)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v3 cover tc358767 driver improvements

Everyone:

This series contains various improvements (at least in my mind) and fixes that I made to tc358767 while working with the code of the driver. Hopefuly each patch is self explanatory.

Feedback is welcome!

Thanks,
Andrey Smirnov

Changes since [v2]:

- Patchset rebased on top of v4 of Tomi's series that recently went in (https://patchwork.freedesktop.org/series/58176/#rev5)

- AUX transfer code converted to user regmap_bulk_read(), regmap_bulk_write()

Changes since [v1]:

- Patchset rebased on top of
https://patchwork.freedesktop.org/series/58176/

- Patches to remove both tc_write() and tc_read() helpers added

- Patches to rework AUX transfer code added

- Both "drm/bridge: tc358767: Simplify polling in tc_main_link_setup()" and "drm/bridge: tc358767: Simplify polling in tc_link_training()" changed to use tc_poll_timeout() instead of regmap_read_poll_timeout()

[v2] lkml.kernel.org/r/[email protected] [v1] lkml.kernel.org/r/[email protected]

Andrey Smirnov (15):
drm/bridge: tc358767: Simplify tc_poll_timeout() drm/bridge: tc358767: Simplify polling in tc_main_link_setup() drm/bridge: tc358767: Simplify polling in tc_link_training() drm/bridge: tc358767: Simplify tc_set_video_mode() drm/bridge: tc358767: Drop custom tc_write()/tc_read() accessors drm/bridge: tc358767: Simplify AUX data read
drm/bridge: tc358767: Simplify AUX data write drm/bridge: tc358767: Increase AUX transfer length limit drm/bridge: tc358767: Use reported AUX transfer size drm/bridge: tc358767: Add support for address-only I2C transfers drm/bridge: tc358767: Introduce tc_set_syspllparam() drm/bridge: tc358767: Introduce tc_pllupdate_pllen() drm/bridge: tc358767: Simplify tc_aux_wait_busy() drm/bridge: tc358767: Drop unnecessary 8 byte buffer drm/bridge: tc358767: Replace magic number in tc_main_link_enable()

 drivers/gpu/drm/bridge/tc358767.c | 668 ++++++++++++++++++------------
 1 file changed, 392 insertions(+), 276 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH v3 1/15 drm/bridge: tc358767: Simplify tc_poll_timeout()

Implementation of tc_poll_timeout() is almost a 100% copy-and-paste of the code for regmap_read_poll_timeout(). Replace copied code with a call to the original. While at it change tc_poll_timeout to accept "struct tc_data *" instead of "struct regmap *" for brevity. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 26 ++++++--------------------
 1 file changed, 6 insertions(+), 20 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +6 -20
index 58e3ca0e25af..fb8a1942ec54 100644
@@ -264,34 +264,21 @@ static inline struct tc_data *connector_to_tc(struct drm_connector *c)
 			goto err;				\
 	} while (0)
 
-static inline int tc_poll_timeout(struct regmap *map, unsigned int addr,
+static inline int tc_poll_timeout(struct tc_data *tc, unsigned int addr,
 				  unsigned int cond_mask,
 				  unsigned int cond_value,
 				  unsigned long sleep_us, u64 timeout_us)
 {
-	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us);
 	unsigned int val;
-	int ret;
 
-	for (;;) {
-		ret = regmap_read(map, addr, &val);
-		if (ret)
-			break;
-		if ((val & cond_mask) == cond_value)
-			break;
-		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) {
-			ret = regmap_read(map, addr, &val);
-			break;
-		}
-		if (sleep_us)
-			usleep_range((sleep_us >> 2) + 1, sleep_us);
-	}
-	return ret ?: (((val & cond_mask) == cond_value) ? 0 : -ETIMEDOUT);
+	return regmap_read_poll_timeout(tc->regmap, addr, val,
+					(val & cond_mask) == cond_value,
+					sleep_us, timeout_us);
 }
 
 static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
 {
-	return tc_poll_timeout(tc->regmap, DP0_AUXSTATUS, AUX_BUSY, 0,
+	return tc_poll_timeout(tc, DP0_AUXSTATUS, AUX_BUSY, 0,
 			       1000, 1000 * timeout_ms);
 }
 
@@ -598,8 +585,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
 	tc_wait_pll_lock(tc);
 
-	ret = tc_poll_timeout(tc->regmap, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1,
-			      1000);
+	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
 	if (ret == -ETIMEDOUT) {
 		dev_err(tc->dev, "Timeout waiting for PHY to become ready");
 		return ret;
Signature · 1 line
2.21.0
#2 lore raw

PATCH v3 2/15 drm/bridge: tc358767: Simplify polling in tc_main_link_setup()

In reply to Andrey Smirnov

Replace explicit polling loop with equivalent call to tc_poll_timeout() for brevity. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +5 -10
index fb8a1942ec54..5e1e73a91696 100644
@@ -774,7 +774,6 @@ static int tc_main_link_enable(struct tc_data *tc)
 	struct device *dev = tc->dev;
 	unsigned int rate;
 	u32 dp_phy_ctrl;
-	int timeout;
 	u32 value;
 	int ret;
 	u8 tmp[8];
@@ -831,15 +830,11 @@ static int tc_main_link_enable(struct tc_data *tc)
 	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 
-	timeout = 1000;
-	do {
-		tc_read(DP_PHY_CTRL, &value);
-		udelay(1);
-	} while ((!(value & PHY_RDY)) && (--timeout));
-
-	if (timeout == 0) {
-		dev_err(dev, "timeout waiting for phy become ready");
-		return -ETIMEDOUT;
+	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
+	if (ret) {
+		if (ret == -ETIMEDOUT)
+			dev_err(dev, "timeout waiting for phy become ready");
+		return ret;
 	}
 
 	/* Set misc: 8 bits per color */
Signature · 1 line
2.21.0
Reviewed-by on v3 2/15
#3 lore raw

Re: [PATCH v3 02/15] drm/bridge: tc358767: Simplify polling in tc_main_link_setup()

Quoted 39 lines · Andrey Smirnov

Replace explicit polling loop with equivalent call to tc_poll_timeout() for brevity. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +0 -5
index fb8a1942ec54..5e1e73a91696 100644
@@ -774,7 +774,6 @@ static int tc_main_link_enable(struct tc_data *tc)
 	struct device *dev = tc->dev;
 	unsigned int rate;
 	u32 dp_phy_ctrl;
-	int timeout;
 	u32 value;
 	int ret;
 	u8 tmp[8];
@@ -831,15 +830,11 @@ static int tc_main_link_enable(struct tc_data *tc)
 	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 
-	timeout = 1000;
-	do {
-		tc_read(DP_PHY_CTRL, &value);
-		udelay(1);

drivers/gpu/drm/bridge/tc358767.c static int tc_main_link_enable(struct tc_data *tc) · line 837

Quoted 10 lines
drivers/gpu/drm/bridge/tc358767.c +5 -5
-	} while ((!(value & PHY_RDY)) && (--timeout));
-
-	if (timeout == 0) {
-		dev_err(dev, "timeout waiting for phy become ready");
-		return -ETIMEDOUT;
+	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
+	if (ret) {
+		if (ret == -ETIMEDOUT)
+			dev_err(dev, "timeout waiting for phy become ready");
+		return ret;

 --
Regards
Andrzej

drivers/gpu/drm/bridge/tc358767.c static int tc_main_link_enable(struct tc_data *tc) · line 840

Quoted 3 lines
drivers/gpu/drm/bridge/tc358767.c +0 -0
 	}
 
 	/* Set misc: 8 bits per color */

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#4 lore raw

PATCH v3 3/15 drm/bridge: tc358767: Simplify polling in tc_link_training()

In reply to Andrey Smirnov

Replace explicit polling in tc_link_training() with equivalent call to tc_poll_timeout() for simplicity. No functional change intended (not including slightly altered debug output).

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +6 -9
index 5e1e73a91696..115cffc55a96 100644
@@ -748,22 +748,19 @@ static int tc_set_video_mode(struct tc_data *tc,
 
 static int tc_wait_link_training(struct tc_data *tc)
 {
-	u32 timeout = 1000;
 	u32 value;
 	int ret;
 
-	do {
-		udelay(1);
-		tc_read(DP0_LTSTAT, &value);
-	} while ((!(value & LT_LOOPDONE)) && (--timeout));
-
-	if (timeout == 0) {
+	ret = tc_poll_timeout(tc, DP0_LTSTAT, LT_LOOPDONE,
+			      LT_LOOPDONE, 1, 1000);
+	if (ret) {
 		dev_err(tc->dev, "Link training timeout waiting for LT_LOOPDONE!\n");
-		return -ETIMEDOUT;
+		return ret;
 	}
 
-	return (value >> 8) & 0x7;
+	tc_read(DP0_LTSTAT, &value);
 
+	return (value >> 8) & 0x7;
 err:
 	return ret;
 }
Signature · 1 line
2.21.0
Reviewed-by on v3 3/15
#5 lore raw

Re: [PATCH v3 03/15] drm/bridge: tc358767: Simplify polling in tc_link_training()

Quoted 35 lines · Andrey Smirnov

Replace explicit polling in tc_link_training() with equivalent call to tc_poll_timeout() for simplicity. No functional change intended (not including slightly altered debug output).

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +0 -4
index 5e1e73a91696..115cffc55a96 100644
@@ -748,22 +748,19 @@ static int tc_set_video_mode(struct tc_data *tc,
 
 static int tc_wait_link_training(struct tc_data *tc)
 {
-	u32 timeout = 1000;
 	u32 value;
 	int ret;
 
-	do {
-		udelay(1);
-		tc_read(DP0_LTSTAT, &value);

drivers/gpu/drm/bridge/tc358767.c static int tc_set_video_mode(struct tc_data *tc, · line 759

Quoted 10 lines
drivers/gpu/drm/bridge/tc358767.c +4 -4
-	} while ((!(value & LT_LOOPDONE)) && (--timeout));
-
-	if (timeout == 0) {
+	ret = tc_poll_timeout(tc, DP0_LTSTAT, LT_LOOPDONE,
+			      LT_LOOPDONE, 1, 1000);
+	if (ret) {
 		dev_err(tc->dev, "Link training timeout waiting for LT_LOOPDONE!\n");
-		return -ETIMEDOUT;
+		return ret;
 	}

Inconsistent coding, in previous patch you check (ret == -ETIMEDOUT) but not here. To simplify the code you can assume that tc_poll_timeout < 0, means timeout, in such case please adjust previous patch.

Beside this:

 --
Regards
Andrzej

drivers/gpu/drm/bridge/tc358767.c static int tc_set_video_mode(struct tc_data *tc, · line 766

Quoted 8 lines
drivers/gpu/drm/bridge/tc358767.c +2 -1
-	return (value >> 8) & 0x7;
+	tc_read(DP0_LTSTAT, &value);
 
+	return (value >> 8) & 0x7;
 err:
 	return ret;
 }

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#6 lore raw

Re: [PATCH v3 03/15] drm/bridge: tc358767: Simplify polling in tc_link_training()

Quoted 44 lines · Andrzej Hajda
Quoted 42 lines · Andrey Smirnov

Replace explicit polling in tc_link_training() with equivalent call to tc_poll_timeout() for simplicity. No functional change intended (not including slightly altered debug output).

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +3 -7
index 5e1e73a91696..115cffc55a96 100644
@@ -748,22 +748,19 @@ static int tc_set_video_mode(struct tc_data *tc,
 
 static int tc_wait_link_training(struct tc_data *tc)
 {
-     u32 timeout = 1000;
      u32 value;
      int ret;
 
-     do {
-             udelay(1);
-             tc_read(DP0_LTSTAT, &value);
-     } while ((!(value & LT_LOOPDONE)) && (--timeout));
-
-     if (timeout == 0) {
+     ret = tc_poll_timeout(tc, DP0_LTSTAT, LT_LOOPDONE,
+                           LT_LOOPDONE, 1, 1000);
+     if (ret) {
              dev_err(tc->dev, "Link training timeout waiting for LT_LOOPDONE!\n");
Quoted 9 lines

drivers/gpu/drm/bridge/tc358767.c static int tc_set_video_mode(struct tc_data *tc, · line 759

Quoted 3 lines
drivers/gpu/drm/bridge/tc358767.c +1 -1
-             return -ETIMEDOUT;
+             return ret;
      }

Inconsistent coding, in previous patch you check (ret == -ETIMEDOUT) but not here. To simplify the code you can assume that tc_poll_timeout < 0, means timeout, in such case please adjust previous patch.

Sure, will do.

Thanks,
Andrey Smirnov

#7 lore raw

PATCH v3 4/15 drm/bridge: tc358767: Simplify tc_set_video_mode()

In reply to Andrey Smirnov

Simplify tc_set_video_mode() by replacing explicit shifting using macros from <linux/bitfield.h>. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 106 ++++++++++++++++++++++--------
 1 file changed, 78 insertions(+), 28 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +78 -28
index 115cffc55a96..c0fc686ce5ec 100644
@@ -24,6 +24,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
@@ -56,6 +57,7 @@
 
 /* Video Path */
 #define VPCTRL0			0x0450
+#define VSDELAY			GENMASK(31, 20)
 #define OPXLFMT_RGB666			(0 << 8)
 #define OPXLFMT_RGB888			(1 << 8)
 #define FRMSYNC_DISABLED		(0 << 4) /* Video Timing Gen Disabled */
@@ -63,9 +65,17 @@
 #define MSF_DISABLED			(0 << 0) /* Magic Square FRC disabled */
 #define MSF_ENABLED			(1 << 0) /* Magic Square FRC enabled */
 #define HTIM01			0x0454
+#define HPW			GENMASK(8, 0)
+#define HBPR			GENMASK(24, 16)
 #define HTIM02			0x0458
+#define HDISPR			GENMASK(10, 0)
+#define HFPR			GENMASK(24, 16)
 #define VTIM01			0x045c
+#define VSPR			GENMASK(7, 0)
+#define VBPR			GENMASK(23, 16)
 #define VTIM02			0x0460
+#define VFPR			GENMASK(23, 16)
+#define VDISPR			GENMASK(10, 0)
 #define VFUEN0			0x0464
 #define VFUEN				BIT(0)   /* Video Frame Timing Upload */
 
@@ -108,14 +118,28 @@
 /* Main Channel */
 #define DP0_SECSAMPLE		0x0640
 #define DP0_VIDSYNCDELAY	0x0644
+#define VID_SYNC_DLY		GENMASK(15, 0)
+#define THRESH_DLY		GENMASK(31, 16)
+
 #define DP0_TOTALVAL		0x0648
+#define H_TOTAL			GENMASK(15, 0)
+#define V_TOTAL			GENMASK(31, 16)
 #define DP0_STARTVAL		0x064c
+#define H_START			GENMASK(15, 0)
+#define V_START			GENMASK(31, 16)
 #define DP0_ACTIVEVAL		0x0650
+#define H_ACT			GENMASK(15, 0)
+#define V_ACT			GENMASK(31, 16)
+
 #define DP0_SYNCVAL		0x0654
+#define VS_WIDTH		GENMASK(30, 16)
+#define HS_WIDTH		GENMASK(14, 0)
 #define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
 #define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
 #define DP0_MISC		0x0658
 #define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
+#define MAX_TU_SYMBOL		GENMASK(28, 23)
+#define TU_SIZE			GENMASK(21, 16)
 #define BPC_6				(0 << 5)
 #define BPC_8				(1 << 5)
 
@@ -192,6 +216,12 @@
 
 /* Test & Debug */
 #define TSTCTL			0x0a00
+#define COLOR_R			GENMASK(31, 24)
+#define COLOR_G			GENMASK(23, 16)
+#define COLOR_B			GENMASK(15, 8)
+#define ENI2CFILTER		BIT(4)
+#define COLOR_BAR_MODE		GENMASK(1, 0)
+#define COLOR_BAR_MODE_BARS	2
 #define PLL_DBG			0x0a04
 
 static bool tc_test_pattern;
@@ -672,6 +702,7 @@ static int tc_set_video_mode(struct tc_data *tc,
 	int upper_margin = mode->vtotal - mode->vsync_end;
 	int lower_margin = mode->vsync_start - mode->vdisplay;
 	int vsync_len = mode->vsync_end - mode->vsync_start;
+	u32 dp0_syncval;
 
 	/*
 	 * Recommended maximum number of symbols transferred in a transfer unit:
@@ -696,50 +727,69 @@ static int tc_set_video_mode(struct tc_data *tc,
 	 * assume we do not need any delay when DPI is a source of
 	 * sync signals
 	 */
-	tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
+	tc_write(VPCTRL0,
+		 FIELD_PREP(VSDELAY, 0) |
 		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
-	tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
-			 (ALIGN(hsync_len, 2) << 0));	 /* Hsync */
-	tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) |  /* H front porch */
-			 (ALIGN(mode->hdisplay, 2) << 0)); /* width */
-	tc_write(VTIM01, (upper_margin << 16) |		/* V back porch */
-			 (vsync_len << 0));		/* Vsync */
-	tc_write(VTIM02, (lower_margin << 16) |		/* V front porch */
-			 (mode->vdisplay << 0));	/* height */
+	tc_write(HTIM01,
+		 FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
+		 FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
+	tc_write(HTIM02,
+		 FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
+		 FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
+	tc_write(VTIM01,
+		 FIELD_PREP(VBPR, upper_margin) |
+		 FIELD_PREP(VSPR, vsync_len));
+	tc_write(VTIM02,
+		 FIELD_PREP(VFPR, lower_margin) |
+		 FIELD_PREP(VDISPR, mode->vdisplay));
 	tc_write(VFUEN0, VFUEN);		/* update settings */
 
 	/* Test pattern settings */
 	tc_write(TSTCTL,
-		 (120 << 24) |	/* Red Color component value */
-		 (20 << 16) |	/* Green Color component value */
-		 (99 << 8) |	/* Blue Color component value */
-		 (1 << 4) |	/* Enable I2C Filter */
-		 (2 << 0) |	/* Color bar Mode */
-		 0);
+		 FIELD_PREP(COLOR_R, 120) |
+		 FIELD_PREP(COLOR_G, 20) |
+		 FIELD_PREP(COLOR_B, 99) |
+		 ENI2CFILTER |
+		 FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
 
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
 	tc_write(DP0_VIDSYNCDELAY,
-		 (max_tu_symbol << 16) |	/* thresh_dly */
-		 (vid_sync_dly << 0));
+		 FIELD_PREP(THRESH_DLY, max_tu_symbol) |
+		 FIELD_PREP(VID_SYNC_DLY, vid_sync_dly));
 
-	tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
+	tc_write(DP0_TOTALVAL,
+		 FIELD_PREP(H_TOTAL, mode->htotal) |
+		 FIELD_PREP(V_TOTAL, mode->vtotal));
 
 	tc_write(DP0_STARTVAL,
-		 ((upper_margin + vsync_len) << 16) |
-		 ((left_margin + hsync_len) << 0));
+		 FIELD_PREP(H_START, left_margin + hsync_len) |
+		 FIELD_PREP(V_START, upper_margin + vsync_len));
+
+	tc_write(DP0_ACTIVEVAL,
+		 FIELD_PREP(V_ACT, mode->vdisplay) |
+		 FIELD_PREP(H_ACT, mode->hdisplay));
+
+	dp0_syncval = FIELD_PREP(VS_WIDTH, vsync_len) |
+		      FIELD_PREP(HS_WIDTH, hsync_len);
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		dp0_syncval |= SYNCVAL_VS_POL_ACTIVE_LOW;
 
-	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		dp0_syncval |= SYNCVAL_HS_POL_ACTIVE_LOW;
 
-	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
-		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
-		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
+	tc_write(DP0_SYNCVAL, dp0_syncval);
 
-	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
-		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
+	tc_write(DPIPXLFMT,
+		 VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
+		 DPI_BPP_RGB888);
 
-	tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) |
-			   BPC_8);
+	tc_write(DP0_MISC,
+		 FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
+		 FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
+		 BPC_8);
 
 	return 0;
 err:
Signature · 1 line
2.21.0
Reviewed-by on v3 4/15
#8 lore raw

Re: [PATCH v3 04/15] drm/bridge: tc358767: Simplify tc_set_video_mode()

Quoted 15 lines · Andrey Smirnov

Simplify tc_set_video_mode() by replacing explicit shifting using macros from <linux/bitfield.h>. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>

 --
Regards
Andrzej

Quoted 180 lines
---
 drivers/gpu/drm/bridge/tc358767.c | 106 ++++++++++++++++++++++--------
 1 file changed, 78 insertions(+), 28 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +74 -26
index 115cffc55a96..c0fc686ce5ec 100644
@@ -24,6 +24,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
@@ -56,6 +57,7 @@
 
 /* Video Path */
 #define VPCTRL0			0x0450
+#define VSDELAY			GENMASK(31, 20)
 #define OPXLFMT_RGB666			(0 << 8)
 #define OPXLFMT_RGB888			(1 << 8)
 #define FRMSYNC_DISABLED		(0 << 4) /* Video Timing Gen Disabled */
@@ -63,9 +65,17 @@
 #define MSF_DISABLED			(0 << 0) /* Magic Square FRC disabled */
 #define MSF_ENABLED			(1 << 0) /* Magic Square FRC enabled */
 #define HTIM01			0x0454
+#define HPW			GENMASK(8, 0)
+#define HBPR			GENMASK(24, 16)
 #define HTIM02			0x0458
+#define HDISPR			GENMASK(10, 0)
+#define HFPR			GENMASK(24, 16)
 #define VTIM01			0x045c
+#define VSPR			GENMASK(7, 0)
+#define VBPR			GENMASK(23, 16)
 #define VTIM02			0x0460
+#define VFPR			GENMASK(23, 16)
+#define VDISPR			GENMASK(10, 0)
 #define VFUEN0			0x0464
 #define VFUEN				BIT(0)   /* Video Frame Timing Upload */
 
@@ -108,14 +118,28 @@
 /* Main Channel */
 #define DP0_SECSAMPLE		0x0640
 #define DP0_VIDSYNCDELAY	0x0644
+#define VID_SYNC_DLY		GENMASK(15, 0)
+#define THRESH_DLY		GENMASK(31, 16)
+
 #define DP0_TOTALVAL		0x0648
+#define H_TOTAL			GENMASK(15, 0)
+#define V_TOTAL			GENMASK(31, 16)
 #define DP0_STARTVAL		0x064c
+#define H_START			GENMASK(15, 0)
+#define V_START			GENMASK(31, 16)
 #define DP0_ACTIVEVAL		0x0650
+#define H_ACT			GENMASK(15, 0)
+#define V_ACT			GENMASK(31, 16)
+
 #define DP0_SYNCVAL		0x0654
+#define VS_WIDTH		GENMASK(30, 16)
+#define HS_WIDTH		GENMASK(14, 0)
 #define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
 #define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
 #define DP0_MISC		0x0658
 #define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
+#define MAX_TU_SYMBOL		GENMASK(28, 23)
+#define TU_SIZE			GENMASK(21, 16)
 #define BPC_6				(0 << 5)
 #define BPC_8				(1 << 5)
 
@@ -192,6 +216,12 @@
 
 /* Test & Debug */
 #define TSTCTL			0x0a00
+#define COLOR_R			GENMASK(31, 24)
+#define COLOR_G			GENMASK(23, 16)
+#define COLOR_B			GENMASK(15, 8)
+#define ENI2CFILTER		BIT(4)
+#define COLOR_BAR_MODE		GENMASK(1, 0)
+#define COLOR_BAR_MODE_BARS	2
 #define PLL_DBG			0x0a04
 
 static bool tc_test_pattern;
@@ -672,6 +702,7 @@ static int tc_set_video_mode(struct tc_data *tc,
 	int upper_margin = mode->vtotal - mode->vsync_end;
 	int lower_margin = mode->vsync_start - mode->vdisplay;
 	int vsync_len = mode->vsync_end - mode->vsync_start;
+	u32 dp0_syncval;
 
 	/*
 	 * Recommended maximum number of symbols transferred in a transfer unit:
@@ -696,50 +727,69 @@ static int tc_set_video_mode(struct tc_data *tc,
 	 * assume we do not need any delay when DPI is a source of
 	 * sync signals
 	 */
-	tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
+	tc_write(VPCTRL0,
+		 FIELD_PREP(VSDELAY, 0) |
 		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
-	tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
-			 (ALIGN(hsync_len, 2) << 0));	 /* Hsync */
-	tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) |  /* H front porch */
-			 (ALIGN(mode->hdisplay, 2) << 0)); /* width */
-	tc_write(VTIM01, (upper_margin << 16) |		/* V back porch */
-			 (vsync_len << 0));		/* Vsync */
-	tc_write(VTIM02, (lower_margin << 16) |		/* V front porch */
-			 (mode->vdisplay << 0));	/* height */
+	tc_write(HTIM01,
+		 FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
+		 FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
+	tc_write(HTIM02,
+		 FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
+		 FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
+	tc_write(VTIM01,
+		 FIELD_PREP(VBPR, upper_margin) |
+		 FIELD_PREP(VSPR, vsync_len));
+	tc_write(VTIM02,
+		 FIELD_PREP(VFPR, lower_margin) |
+		 FIELD_PREP(VDISPR, mode->vdisplay));
 	tc_write(VFUEN0, VFUEN);		/* update settings */
 
 	/* Test pattern settings */
 	tc_write(TSTCTL,
-		 (120 << 24) |	/* Red Color component value */
-		 (20 << 16) |	/* Green Color component value */
-		 (99 << 8) |	/* Blue Color component value */
-		 (1 << 4) |	/* Enable I2C Filter */
-		 (2 << 0) |	/* Color bar Mode */
-		 0);
+		 FIELD_PREP(COLOR_R, 120) |
+		 FIELD_PREP(COLOR_G, 20) |
+		 FIELD_PREP(COLOR_B, 99) |
+		 ENI2CFILTER |
+		 FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
 
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
 	tc_write(DP0_VIDSYNCDELAY,
-		 (max_tu_symbol << 16) |	/* thresh_dly */
-		 (vid_sync_dly << 0));
+		 FIELD_PREP(THRESH_DLY, max_tu_symbol) |
+		 FIELD_PREP(VID_SYNC_DLY, vid_sync_dly));
 
-	tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
+	tc_write(DP0_TOTALVAL,
+		 FIELD_PREP(H_TOTAL, mode->htotal) |
+		 FIELD_PREP(V_TOTAL, mode->vtotal));
 
 	tc_write(DP0_STARTVAL,
-		 ((upper_margin + vsync_len) << 16) |
-		 ((left_margin + hsync_len) << 0));
+		 FIELD_PREP(H_START, left_margin + hsync_len) |
+		 FIELD_PREP(V_START, upper_margin + vsync_len));
+
+	tc_write(DP0_ACTIVEVAL,
+		 FIELD_PREP(V_ACT, mode->vdisplay) |
+		 FIELD_PREP(H_ACT, mode->hdisplay));
+
+	dp0_syncval = FIELD_PREP(VS_WIDTH, vsync_len) |
+		      FIELD_PREP(HS_WIDTH, hsync_len);
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		dp0_syncval |= SYNCVAL_VS_POL_ACTIVE_LOW;
 
-	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		dp0_syncval |= SYNCVAL_HS_POL_ACTIVE_LOW;
 
-	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
-		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
-		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
+	tc_write(DP0_SYNCVAL, dp0_syncval);
 
-	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
-		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
+	tc_write(DPIPXLFMT,
+		 VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
+		 DPI_BPP_RGB888);

drivers/gpu/drm/bridge/tc358767.c static int tc_set_video_mode(struct tc_data *tc, · line 795

Quoted 10 lines
drivers/gpu/drm/bridge/tc358767.c +4 -2
 
-	tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) |
-			   BPC_8);
+	tc_write(DP0_MISC,
+		 FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
+		 FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
+		 BPC_8);
 
 	return 0;
 err:

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#9 lore raw

PATCH v3 5/15 drm/bridge: tc358767: Drop custom tc_write()/tc_read() accessors

In reply to Andrey Smirnov

A very unfortunate aspect of tc_write()/tc_read() macro helpers is that they capture quite a bit of context around them and thus require the caller to have magic variables 'ret' and 'tc' as well as label 'err'. That makes a number of code paths rather counterintuitive and somewhat clunky, for example tc_stream_clock_calc() ends up being like this:

	int ret;

	tc_write(DP0_VIDMNGEN1, 32768);

	return 0;
err:
	return ret;

which is rather surprising when you read the code for the first time. Since those helpers arguably aren't really saving that much code and there's no way of fixing them without making them too verbose to be worth it change the driver code to not use them at all.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 381 ++++++++++++++++++------------
 1 file changed, 229 insertions(+), 152 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +229 -152
index c0fc686ce5ec..e197ce0fb166 100644
@@ -280,20 +280,6 @@ static inline struct tc_data *connector_to_tc(struct drm_connector *c)
 	return container_of(c, struct tc_data, connector);
 }
 
-/* Simple macros to avoid repeated error checks */
-#define tc_write(reg, var)					\
-	do {							\
-		ret = regmap_write(tc->regmap, reg, var);	\
-		if (ret)					\
-			goto err;				\
-	} while (0)
-#define tc_read(reg, var)					\
-	do {							\
-		ret = regmap_read(tc->regmap, reg, var);	\
-		if (ret)					\
-			goto err;				\
-	} while (0)
-
 static inline int tc_poll_timeout(struct tc_data *tc, unsigned int addr,
 				  unsigned int cond_mask,
 				  unsigned int cond_value,
@@ -351,7 +337,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 
 	ret = tc_aux_wait_busy(tc, 100);
 	if (ret)
-		goto err;
+		return ret;
 
 	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
 		/* Store data */
@@ -362,7 +348,11 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 				tmp = (tmp << 8) | buf[i];
 			i++;
 			if (((i % 4) == 0) || (i == size)) {
-				tc_write(DP0_AUXWDATA((i - 1) >> 2), tmp);
+				ret = regmap_write(tc->regmap,
+						   DP0_AUXWDATA((i - 1) >> 2),
+						   tmp);
+				if (ret)
+					return ret;
 				tmp = 0;
 			}
 		}
@@ -372,23 +362,32 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	}
 
 	/* Store address */
-	tc_write(DP0_AUXADDR, msg->address);
+	ret = regmap_write(tc->regmap, DP0_AUXADDR, msg->address);
+	if (ret)
+		return ret;
 	/* Start transfer */
-	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | request);
+	ret = regmap_write(tc->regmap, DP0_AUXCFG0,
+			   ((size - 1) << 8) | request);
+	if (ret)
+		return ret;
 
 	ret = tc_aux_wait_busy(tc, 100);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = tc_aux_get_status(tc, &msg->reply);
 	if (ret)
-		goto err;
+		return ret;
 
 	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
 		/* Read data */
 		while (i < size) {
-			if ((i % 4) == 0)
-				tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+			if ((i % 4) == 0) {
+				ret = regmap_read(tc->regmap,
+						  DP0_AUXRDATA(i >> 2), &tmp);
+				if (ret)
+					return ret;
+			}
 			buf[i] = tmp & 0xff;
 			tmp = tmp >> 8;
 			i++;
@@ -396,8 +395,6 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	}
 
 	return size;
-err:
-	return ret;
 }
 
 static const char * const training_pattern1_errors[] = {
@@ -454,6 +451,7 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 	int ext_div[] = {1, 2, 3, 5, 7};
 	int best_pixelclock = 0;
 	int vco_hi = 0;
+	u32 pxl_pllparam;
 
 	dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
 		refclk);
@@ -523,24 +521,29 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 		best_mul = 0;
 
 	/* Power up PLL and switch to bypass */
-	tc_write(PXL_PLLCTRL, PLLBYP | PLLEN);
+	ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP | PLLEN);
+	if (ret)
+		return ret;
+
+	pxl_pllparam  = vco_hi << 24; /* For PLL VCO >= 300 MHz = 1 */
+	pxl_pllparam |= ext_div[best_pre] << 20; /* External Pre-divider */
+	pxl_pllparam |= ext_div[best_post] << 16; /* External Post-divider */
+	pxl_pllparam |= IN_SEL_REFCLK; /* Use RefClk as PLL input */
+	pxl_pllparam |= best_div << 8; /* Divider for PLL RefClk */
+	pxl_pllparam |= best_mul; /* Multiplier for PLL */
 
-	tc_write(PXL_PLLPARAM,
-		 (vco_hi << 24) |		/* For PLL VCO >= 300 MHz = 1 */
-		 (ext_div[best_pre] << 20) |	/* External Pre-divider */
-		 (ext_div[best_post] << 16) |	/* External Post-divider */
-		 IN_SEL_REFCLK |		/* Use RefClk as PLL input */
-		 (best_div << 8) |		/* Divider for PLL RefClk */
-		 (best_mul << 0));		/* Multiplier for PLL */
+	ret = regmap_write(tc->regmap, PXL_PLLPARAM, pxl_pllparam);
+	if (ret)
+		return ret;
 
 	/* Force PLL parameter update and disable bypass */
-	tc_write(PXL_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
 
 	tc_wait_pll_lock(tc);
 
 	return 0;
-err:
-	return ret;
 }
 
 static int tc_pxl_pll_dis(struct tc_data *tc)
@@ -551,7 +554,6 @@ static int tc_pxl_pll_dis(struct tc_data *tc)
 
 static int tc_stream_clock_calc(struct tc_data *tc)
 {
-	int ret;
 	/*
 	 * If the Stream clock and Link Symbol clock are
 	 * asynchronous with each other, the value of M changes over
@@ -567,16 +569,13 @@ static int tc_stream_clock_calc(struct tc_data *tc)
 	 * M/N = f_STRMCLK / f_LSCLK
 	 *
 	 */
-	tc_write(DP0_VIDMNGEN1, 32768);
-
-	return 0;
-err:
-	return ret;
+	return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
 }
 
 static int tc_aux_link_setup(struct tc_data *tc)
 {
 	unsigned long rate;
+	u32 dp0_auxcfg1;
 	u32 value;
 	int ret;
 
@@ -601,18 +600,25 @@ static int tc_aux_link_setup(struct tc_data *tc)
 
 	/* Setup DP-PHY / PLL */
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
-	tc_write(SYS_PLLPARAM, value);
-
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN);
+	ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+	if (ret)
+		goto err;
 
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN);
+	if (ret)
+		goto err;
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
 	 * disable PLL bypass, enable PLL
 	 */
-	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		goto err;
 	tc_wait_pll_lock(tc);
 
-	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		goto err;
 	tc_wait_pll_lock(tc);
 
 	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
@@ -624,9 +630,13 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	}
 
 	/* Setup AUX link */
-	tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
-		 (0x06 << 8) |	/* Aux Bit Period Calculator Threshold */
-		 (0x3f << 0));	/* Aux Response Timeout Timer */
+	dp0_auxcfg1  = AUX_RX_FILTER_EN;
+	dp0_auxcfg1 |= 0x06 << 8; /* Aux Bit Period Calculator Threshold */
+	dp0_auxcfg1 |= 0x3f << 0; /* Aux Response Timeout Timer */
+
+	ret = regmap_write(tc->regmap, DP0_AUXCFG1, dp0_auxcfg1);
+	if (ret)
+		goto err;
 
 	return 0;
 err:
@@ -727,48 +737,73 @@ static int tc_set_video_mode(struct tc_data *tc,
 	 * assume we do not need any delay when DPI is a source of
 	 * sync signals
 	 */
-	tc_write(VPCTRL0,
-		 FIELD_PREP(VSDELAY, 0) |
-		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
-	tc_write(HTIM01,
-		 FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
-		 FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
-	tc_write(HTIM02,
-		 FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
-		 FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
-	tc_write(VTIM01,
-		 FIELD_PREP(VBPR, upper_margin) |
-		 FIELD_PREP(VSPR, vsync_len));
-	tc_write(VTIM02,
-		 FIELD_PREP(VFPR, lower_margin) |
-		 FIELD_PREP(VDISPR, mode->vdisplay));
-	tc_write(VFUEN0, VFUEN);		/* update settings */
+	ret = regmap_write(tc->regmap, VPCTRL0,
+			   FIELD_PREP(VSDELAY, 0) |
+			   OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, HTIM01,
+			   FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
+			   FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, HTIM02,
+			   FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
+			   FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, VTIM01,
+			   FIELD_PREP(VBPR, upper_margin) |
+			   FIELD_PREP(VSPR, vsync_len));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, VTIM02,
+			   FIELD_PREP(VFPR, lower_margin) |
+			   FIELD_PREP(VDISPR, mode->vdisplay));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, VFUEN0, VFUEN); /* update settings */
+	if (ret)
+		return ret;
 
 	/* Test pattern settings */
-	tc_write(TSTCTL,
-		 FIELD_PREP(COLOR_R, 120) |
-		 FIELD_PREP(COLOR_G, 20) |
-		 FIELD_PREP(COLOR_B, 99) |
-		 ENI2CFILTER |
-		 FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
+	ret = regmap_write(tc->regmap, TSTCTL,
+			   FIELD_PREP(COLOR_R, 120) |
+			   FIELD_PREP(COLOR_G, 20) |
+			   FIELD_PREP(COLOR_B, 99) |
+			   ENI2CFILTER |
+			   FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
+	if (ret)
+		return ret;
 
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
-	tc_write(DP0_VIDSYNCDELAY,
+	ret = regmap_write(tc->regmap, DP0_VIDSYNCDELAY,
 		 FIELD_PREP(THRESH_DLY, max_tu_symbol) |
 		 FIELD_PREP(VID_SYNC_DLY, vid_sync_dly));
 
-	tc_write(DP0_TOTALVAL,
-		 FIELD_PREP(H_TOTAL, mode->htotal) |
-		 FIELD_PREP(V_TOTAL, mode->vtotal));
+	ret = regmap_write(tc->regmap, DP0_TOTALVAL,
+			   FIELD_PREP(H_TOTAL, mode->htotal) |
+			   FIELD_PREP(V_TOTAL, mode->vtotal));
+	if (ret)
+		return ret;
 
-	tc_write(DP0_STARTVAL,
-		 FIELD_PREP(H_START, left_margin + hsync_len) |
-		 FIELD_PREP(V_START, upper_margin + vsync_len));
+	ret = regmap_write(tc->regmap, DP0_STARTVAL,
+			   FIELD_PREP(H_START, left_margin + hsync_len) |
+			   FIELD_PREP(V_START, upper_margin + vsync_len));
+	if (ret)
+		return ret;
 
-	tc_write(DP0_ACTIVEVAL,
-		 FIELD_PREP(V_ACT, mode->vdisplay) |
-		 FIELD_PREP(H_ACT, mode->hdisplay));
+	ret = regmap_write(tc->regmap, DP0_ACTIVEVAL,
+			   FIELD_PREP(V_ACT, mode->vdisplay) |
+			   FIELD_PREP(H_ACT, mode->hdisplay));
+	if (ret)
+		return ret;
 
 	dp0_syncval = FIELD_PREP(VS_WIDTH, vsync_len) |
 		      FIELD_PREP(HS_WIDTH, hsync_len);
@@ -779,21 +814,25 @@ static int tc_set_video_mode(struct tc_data *tc,
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		dp0_syncval |= SYNCVAL_HS_POL_ACTIVE_LOW;
 
-	tc_write(DP0_SYNCVAL, dp0_syncval);
+	ret = regmap_write(tc->regmap, DP0_SYNCVAL, dp0_syncval);
+	if (ret)
+		return ret;
 
-	tc_write(DPIPXLFMT,
-		 VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
-		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
-		 DPI_BPP_RGB888);
+	ret = regmap_write(tc->regmap, DPIPXLFMT,
+			   VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+			   DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
+			   DPI_BPP_RGB888);
+	if (ret)
+		return ret;
 
-	tc_write(DP0_MISC,
-		 FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
-		 FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
-		 BPC_8);
+	ret = regmap_write(tc->regmap, DP0_MISC,
+			   FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
+			   FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
+			   BPC_8);
+	if (ret)
+		return ret;
 
 	return 0;
-err:
-	return ret;
 }
 
 static int tc_wait_link_training(struct tc_data *tc)
@@ -808,11 +847,11 @@ static int tc_wait_link_training(struct tc_data *tc)
 		return ret;
 	}
 
-	tc_read(DP0_LTSTAT, &value);
+	ret = regmap_read(tc->regmap, DP0_LTSTAT, &value);
+	if (ret)
+		return ret;
 
 	return (value >> 8) & 0x7;
-err:
-	return ret;
 }
 
 static int tc_main_link_enable(struct tc_data *tc)
@@ -827,15 +866,25 @@ static int tc_main_link_enable(struct tc_data *tc)
 
 	dev_dbg(tc->dev, "link enable\n");
 
-	tc_read(DP0CTL, &value);
-	if (WARN_ON(value & DP_EN))
-		tc_write(DP0CTL, 0);
+	ret = regmap_read(tc->regmap, DP0CTL, &value);
+	if (ret)
+		return ret;
+
+	if (WARN_ON(value & DP_EN)) {
+		ret = regmap_write(tc->regmap, DP0CTL, 0);
+		if (ret)
+			return ret;
+	}
 
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc));
+	if (ret)
+		return ret;
 	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
-	tc_write(DP1_SRCCTRL,
+	ret = regmap_write(tc->regmap, DP1_SRCCTRL,
 		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
 		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
+	if (ret)
+		return ret;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -855,27 +904,36 @@ static int tc_main_link_enable(struct tc_data *tc)
 		return -EINVAL;
 	}
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
-	tc_write(SYS_PLLPARAM, value);
+	ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+	if (ret)
+		return ret;
 
 	/* Setup Main Link */
 	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
 	if (tc->link.base.num_lanes == 2)
 		dp_phy_ctrl |= PHY_2LANE;
-	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
+	if (ret)
+		return ret;
 
 	/* PLL setup */
-	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
 	tc_wait_pll_lock(tc);
 
-	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
 	tc_wait_pll_lock(tc);
 
 	/* Reset/Enable Main Links */
 	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
-	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
 	usleep_range(100, 200);
 	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
-	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
 
 	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
 	if (ret) {
@@ -887,7 +945,7 @@ static int tc_main_link_enable(struct tc_data *tc)
 	/* Set misc: 8 bits per color */
 	ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
 	if (ret)
-		goto err;
+		return ret;
 
 	/*
 	 * ASSR mode
@@ -940,53 +998,71 @@ static int tc_main_link_enable(struct tc_data *tc)
 	/* Clock-Recovery */
 
 	/* Set DPCD 0x102 for Training Pattern 1 */
-	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE |
-		 DP_TRAINING_PATTERN_1);
+	ret = regmap_write(tc->regmap, DP0_SNKLTCTRL,
+			   DP_LINK_SCRAMBLING_DISABLE |
+			   DP_TRAINING_PATTERN_1);
+	if (ret)
+		return ret;
 
-	tc_write(DP0_LTLOOPCTRL,
-		 (15 << 28) |	/* Defer Iteration Count */
-		 (15 << 24) |	/* Loop Iteration Count */
-		 (0xd << 0));	/* Loop Timer Delay */
+	ret = regmap_write(tc->regmap, DP0_LTLOOPCTRL,
+			   (15 << 28) |	/* Defer Iteration Count */
+			   (15 << 24) |	/* Loop Iteration Count */
+			   (0xd << 0));	/* Loop Timer Delay */
+	if (ret)
+		return ret;
 
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
-		 DP0_SRCCTRL_AUTOCORRECT | DP0_SRCCTRL_TP1);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL,
+			   tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+			   DP0_SRCCTRL_AUTOCORRECT |
+			   DP0_SRCCTRL_TP1);
+	if (ret)
+		return ret;
 
 	/* Enable DP0 to start Link Training */
-	tc_write(DP0CTL,
-		 ((tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING) ? EF_EN : 0) |
-		 DP_EN);
+	ret = regmap_write(tc->regmap, DP0CTL,
+			   ((tc->link.base.capabilities &
+			     DP_LINK_CAP_ENHANCED_FRAMING) ? EF_EN : 0) |
+			   DP_EN);
+	if (ret)
+		return ret;
 
 	/* wait */
+
 	ret = tc_wait_link_training(tc);
 	if (ret < 0)
-		goto err;
+		return ret;
 
 	if (ret) {
 		dev_err(tc->dev, "Link training phase 1 failed: %s\n",
 			training_pattern1_errors[ret]);
-		ret = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	/* Channel Equalization */
 
 	/* Set DPCD 0x102 for Training Pattern 2 */
-	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE |
-		 DP_TRAINING_PATTERN_2);
+	ret = regmap_write(tc->regmap, DP0_SNKLTCTRL,
+			   DP_LINK_SCRAMBLING_DISABLE |
+			   DP_TRAINING_PATTERN_2);
+	if (ret)
+		return ret;
 
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
-		 DP0_SRCCTRL_AUTOCORRECT | DP0_SRCCTRL_TP2);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL,
+			   tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+			   DP0_SRCCTRL_AUTOCORRECT |
+			   DP0_SRCCTRL_TP2);
+	if (ret)
+		return ret;
 
 	/* wait */
 	ret = tc_wait_link_training(tc);
 	if (ret < 0)
-		goto err;
+		return ret;
 
 	if (ret) {
 		dev_err(tc->dev, "Link training phase 2 failed: %s\n",
 			training_pattern2_errors[ret]);
-		ret = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	/*
@@ -999,7 +1075,10 @@ static int tc_main_link_enable(struct tc_data *tc)
 	 */
 
 	/* Clear Training Pattern, set AutoCorrect Mode = 1 */
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc) |
+			   DP0_SRCCTRL_AUTOCORRECT);
+	if (ret)
+		return ret;
 
 	/* Clear DPCD 0x102 */
 	/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
@@ -1043,7 +1122,7 @@ static int tc_main_link_enable(struct tc_data *tc)
 		dev_err(dev, "0x0205 SINK_STATUS:               0x%02x\n", tmp[3]);
 		dev_err(dev, "0x0206 ADJUST_REQUEST_LANE0_1:    0x%02x\n", tmp[4]);
 		dev_err(dev, "0x0207 ADJUST_REQUEST_LANE2_3:    0x%02x\n", tmp[5]);
-		goto err;
+		return ret;
 	}
 
 	return 0;
@@ -1052,7 +1131,6 @@ static int tc_main_link_enable(struct tc_data *tc)
 	return ret;
 err_dpcd_write:
 	dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
-err:
 	return ret;
 }
 
@@ -1062,12 +1140,11 @@ static int tc_main_link_disable(struct tc_data *tc)
 
 	dev_dbg(tc->dev, "link disable\n");
 
-	tc_write(DP0_SRCCTRL, 0);
-	tc_write(DP0CTL, 0);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL, 0);
+	if (ret)
+		return ret;
 
-	return 0;
-err:
-	return ret;
+	return regmap_write(tc->regmap, DP0CTL, 0);
 }
 
 static int tc_stream_enable(struct tc_data *tc)
@@ -1082,7 +1159,7 @@ static int tc_stream_enable(struct tc_data *tc)
 		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
 				    1000 * tc->mode.clock);
 		if (ret)
-			goto err;
+			return ret;
 	}
 
 	ret = tc_set_video_mode(tc, &tc->mode);
@@ -1097,7 +1174,9 @@ static int tc_stream_enable(struct tc_data *tc)
 	value = VID_MN_GEN | DP_EN;
 	if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
 		value |= EF_EN;
-	tc_write(DP0CTL, value);
+	ret = regmap_write(tc->regmap, DP0CTL, value);
+	if (ret)
+		return ret;
 	/*
 	 * VID_EN assertion should be delayed by at least N * LSCLK
 	 * cycles from the time VID_MN_GEN is enabled in order to
@@ -1107,36 +1186,35 @@ static int tc_stream_enable(struct tc_data *tc)
 	 */
 	usleep_range(500, 1000);
 	value |= VID_EN;
-	tc_write(DP0CTL, value);
+	ret = regmap_write(tc->regmap, DP0CTL, value);
+	if (ret)
+		return ret;
 	/* Set input interface */
 	value = DP0_AUDSRC_NO_INPUT;
 	if (tc_test_pattern)
 		value |= DP0_VIDSRC_COLOR_BAR;
 	else
 		value |= DP0_VIDSRC_DPI_RX;
-	tc_write(SYSCTRL, value);
+	ret = regmap_write(tc->regmap, SYSCTRL, value);
+	if (ret)
+		return ret;
 
 	return 0;
-err:
-	return ret;
 }
 
 static int tc_stream_disable(struct tc_data *tc)
 {
 	int ret;
-	u32 val;
 
 	dev_dbg(tc->dev, "disable video stream\n");
 
-	tc_read(DP0CTL, &val);
-	val &= ~VID_EN;
-	tc_write(DP0CTL, val);
+	ret = regmap_update_bits(tc->regmap, DP0CTL, VID_EN, 0);
+	if (ret)
+		return ret;
 
 	tc_pxl_pll_dis(tc);
 
 	return 0;
-err:
-	return ret;
 }
 
 static void tc_bridge_pre_enable(struct drm_bridge *bridge)
@@ -1328,7 +1406,9 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
 			return connector_status_unknown;
 	}
 
-	tc_read(GPIOI, &val);
+	ret = regmap_read(tc->regmap, GPIOI, &val);
+	if (ret)
+		return connector_status_unknown;
 
 	conn = val & BIT(tc->hpd_pin);
 
@@ -1336,9 +1416,6 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
 		return connector_status_connected;
 	else
 		return connector_status_disconnected;
-
-err:
-	return connector_status_unknown;
 }
 
 static const struct drm_connector_funcs tc_connector_funcs = {
Signature · 1 line
2.21.0
Reviewed-by on v3 5/15
#10 lore raw

Re: [PATCH v3 05/15] drm/bridge: tc358767: Drop custom tc_write()/tc_read() accessors

Quoted 15 lines · Andrey Smirnov

A very unfortunate aspect of tc_write()/tc_read() macro helpers is that they capture quite a bit of context around them and thus require the caller to have magic variables 'ret' and 'tc' as well as label 'err'. That makes a number of code paths rather counterintuitive and somewhat clunky, for example tc_stream_clock_calc() ends up being like this:

	int ret;

	tc_write(DP0_VIDMNGEN1, 32768);

	return 0;
err:
	return ret;
Quoted 4 lines

which is rather surprising when you read the code for the first time. Since those helpers arguably aren't really saving that much code and there's no way of fixing them without making them too verbose to be worth it change the driver code to not use them at all.

On the other side, error checking after every registry access is very annoying and significantly augments the code, makes it redundant and less readable. To avoid it one can cache error state, and do not perform real work until the error is clear. For example with following accessor:

void tc_write(struct tc_data *tc, u32 reg, u32 val){

    int ret;

    if (tc->error) //This check is IMPORTANT

        return;

    ret =regmap_write(...);

    if (ret >= 0)

        return;

    tc->error = ret;

    dev_err(tc->dev, "Error writing register %#x\n", reg);

}

You can safely write code like:

    tc_write(tc, DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN);

    tc_write(tc, DP0_PLLCTRL, PLLUPDATE | PLLEN);

    tc_write(tc, DP1_PLLCTRL, PLLUPDATE | PLLEN);

    if (tc->error) {

        tc->error = 0;

        goto err;

    }

This is of course loose suggestion.

Anyway:

 --
Regards
Andrzej

Quoted 703 lines
Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 381 ++++++++++++++++++------------
 1 file changed, 229 insertions(+), 152 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +229 -152
index c0fc686ce5ec..e197ce0fb166 100644
@@ -280,20 +280,6 @@ static inline struct tc_data *connector_to_tc(struct drm_connector *c)
 	return container_of(c, struct tc_data, connector);
 }
 
-/* Simple macros to avoid repeated error checks */
-#define tc_write(reg, var)					\
-	do {							\
-		ret = regmap_write(tc->regmap, reg, var);	\
-		if (ret)					\
-			goto err;				\
-	} while (0)
-#define tc_read(reg, var)					\
-	do {							\
-		ret = regmap_read(tc->regmap, reg, var);	\
-		if (ret)					\
-			goto err;				\
-	} while (0)
-
 static inline int tc_poll_timeout(struct tc_data *tc, unsigned int addr,
 				  unsigned int cond_mask,
 				  unsigned int cond_value,
@@ -351,7 +337,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 
 	ret = tc_aux_wait_busy(tc, 100);
 	if (ret)
-		goto err;
+		return ret;
 
 	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
 		/* Store data */
@@ -362,7 +348,11 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 				tmp = (tmp << 8) | buf[i];
 			i++;
 			if (((i % 4) == 0) || (i == size)) {
-				tc_write(DP0_AUXWDATA((i - 1) >> 2), tmp);
+				ret = regmap_write(tc->regmap,
+						   DP0_AUXWDATA((i - 1) >> 2),
+						   tmp);
+				if (ret)
+					return ret;
 				tmp = 0;
 			}
 		}
@@ -372,23 +362,32 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	}
 
 	/* Store address */
-	tc_write(DP0_AUXADDR, msg->address);
+	ret = regmap_write(tc->regmap, DP0_AUXADDR, msg->address);
+	if (ret)
+		return ret;
 	/* Start transfer */
-	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | request);
+	ret = regmap_write(tc->regmap, DP0_AUXCFG0,
+			   ((size - 1) << 8) | request);
+	if (ret)
+		return ret;
 
 	ret = tc_aux_wait_busy(tc, 100);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = tc_aux_get_status(tc, &msg->reply);
 	if (ret)
-		goto err;
+		return ret;
 
 	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
 		/* Read data */
 		while (i < size) {
-			if ((i % 4) == 0)
-				tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+			if ((i % 4) == 0) {
+				ret = regmap_read(tc->regmap,
+						  DP0_AUXRDATA(i >> 2), &tmp);
+				if (ret)
+					return ret;
+			}
 			buf[i] = tmp & 0xff;
 			tmp = tmp >> 8;
 			i++;
@@ -396,8 +395,6 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	}
 
 	return size;
-err:
-	return ret;
 }
 
 static const char * const training_pattern1_errors[] = {
@@ -454,6 +451,7 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 	int ext_div[] = {1, 2, 3, 5, 7};
 	int best_pixelclock = 0;
 	int vco_hi = 0;
+	u32 pxl_pllparam;
 
 	dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
 		refclk);
@@ -523,24 +521,29 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 		best_mul = 0;
 
 	/* Power up PLL and switch to bypass */
-	tc_write(PXL_PLLCTRL, PLLBYP | PLLEN);
+	ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP | PLLEN);
+	if (ret)
+		return ret;
+
+	pxl_pllparam  = vco_hi << 24; /* For PLL VCO >= 300 MHz = 1 */
+	pxl_pllparam |= ext_div[best_pre] << 20; /* External Pre-divider */
+	pxl_pllparam |= ext_div[best_post] << 16; /* External Post-divider */
+	pxl_pllparam |= IN_SEL_REFCLK; /* Use RefClk as PLL input */
+	pxl_pllparam |= best_div << 8; /* Divider for PLL RefClk */
+	pxl_pllparam |= best_mul; /* Multiplier for PLL */
 
-	tc_write(PXL_PLLPARAM,
-		 (vco_hi << 24) |		/* For PLL VCO >= 300 MHz = 1 */
-		 (ext_div[best_pre] << 20) |	/* External Pre-divider */
-		 (ext_div[best_post] << 16) |	/* External Post-divider */
-		 IN_SEL_REFCLK |		/* Use RefClk as PLL input */
-		 (best_div << 8) |		/* Divider for PLL RefClk */
-		 (best_mul << 0));		/* Multiplier for PLL */
+	ret = regmap_write(tc->regmap, PXL_PLLPARAM, pxl_pllparam);
+	if (ret)
+		return ret;
 
 	/* Force PLL parameter update and disable bypass */
-	tc_write(PXL_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
 
 	tc_wait_pll_lock(tc);
 
 	return 0;
-err:
-	return ret;
 }
 
 static int tc_pxl_pll_dis(struct tc_data *tc)
@@ -551,7 +554,6 @@ static int tc_pxl_pll_dis(struct tc_data *tc)
 
 static int tc_stream_clock_calc(struct tc_data *tc)
 {
-	int ret;
 	/*
 	 * If the Stream clock and Link Symbol clock are
 	 * asynchronous with each other, the value of M changes over
@@ -567,16 +569,13 @@ static int tc_stream_clock_calc(struct tc_data *tc)
 	 * M/N = f_STRMCLK / f_LSCLK
 	 *
 	 */
-	tc_write(DP0_VIDMNGEN1, 32768);
-
-	return 0;
-err:
-	return ret;
+	return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
 }
 
 static int tc_aux_link_setup(struct tc_data *tc)
 {
 	unsigned long rate;
+	u32 dp0_auxcfg1;
 	u32 value;
 	int ret;
 
@@ -601,18 +600,25 @@ static int tc_aux_link_setup(struct tc_data *tc)
 
 	/* Setup DP-PHY / PLL */
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
-	tc_write(SYS_PLLPARAM, value);
-
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN);
+	ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+	if (ret)
+		goto err;
 
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN);
+	if (ret)
+		goto err;
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
 	 * disable PLL bypass, enable PLL
 	 */
-	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		goto err;
 	tc_wait_pll_lock(tc);
 
-	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		goto err;
 	tc_wait_pll_lock(tc);
 
 	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
@@ -624,9 +630,13 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	}
 
 	/* Setup AUX link */
-	tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
-		 (0x06 << 8) |	/* Aux Bit Period Calculator Threshold */
-		 (0x3f << 0));	/* Aux Response Timeout Timer */
+	dp0_auxcfg1  = AUX_RX_FILTER_EN;
+	dp0_auxcfg1 |= 0x06 << 8; /* Aux Bit Period Calculator Threshold */
+	dp0_auxcfg1 |= 0x3f << 0; /* Aux Response Timeout Timer */
+
+	ret = regmap_write(tc->regmap, DP0_AUXCFG1, dp0_auxcfg1);
+	if (ret)
+		goto err;
 
 	return 0;
 err:
@@ -727,48 +737,73 @@ static int tc_set_video_mode(struct tc_data *tc,
 	 * assume we do not need any delay when DPI is a source of
 	 * sync signals
 	 */
-	tc_write(VPCTRL0,
-		 FIELD_PREP(VSDELAY, 0) |
-		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
-	tc_write(HTIM01,
-		 FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
-		 FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
-	tc_write(HTIM02,
-		 FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
-		 FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
-	tc_write(VTIM01,
-		 FIELD_PREP(VBPR, upper_margin) |
-		 FIELD_PREP(VSPR, vsync_len));
-	tc_write(VTIM02,
-		 FIELD_PREP(VFPR, lower_margin) |
-		 FIELD_PREP(VDISPR, mode->vdisplay));
-	tc_write(VFUEN0, VFUEN);		/* update settings */
+	ret = regmap_write(tc->regmap, VPCTRL0,
+			   FIELD_PREP(VSDELAY, 0) |
+			   OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, HTIM01,
+			   FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
+			   FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, HTIM02,
+			   FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
+			   FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, VTIM01,
+			   FIELD_PREP(VBPR, upper_margin) |
+			   FIELD_PREP(VSPR, vsync_len));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, VTIM02,
+			   FIELD_PREP(VFPR, lower_margin) |
+			   FIELD_PREP(VDISPR, mode->vdisplay));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(tc->regmap, VFUEN0, VFUEN); /* update settings */
+	if (ret)
+		return ret;
 
 	/* Test pattern settings */
-	tc_write(TSTCTL,
-		 FIELD_PREP(COLOR_R, 120) |
-		 FIELD_PREP(COLOR_G, 20) |
-		 FIELD_PREP(COLOR_B, 99) |
-		 ENI2CFILTER |
-		 FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
+	ret = regmap_write(tc->regmap, TSTCTL,
+			   FIELD_PREP(COLOR_R, 120) |
+			   FIELD_PREP(COLOR_G, 20) |
+			   FIELD_PREP(COLOR_B, 99) |
+			   ENI2CFILTER |
+			   FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
+	if (ret)
+		return ret;
 
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
-	tc_write(DP0_VIDSYNCDELAY,
+	ret = regmap_write(tc->regmap, DP0_VIDSYNCDELAY,
 		 FIELD_PREP(THRESH_DLY, max_tu_symbol) |
 		 FIELD_PREP(VID_SYNC_DLY, vid_sync_dly));
 
-	tc_write(DP0_TOTALVAL,
-		 FIELD_PREP(H_TOTAL, mode->htotal) |
-		 FIELD_PREP(V_TOTAL, mode->vtotal));
+	ret = regmap_write(tc->regmap, DP0_TOTALVAL,
+			   FIELD_PREP(H_TOTAL, mode->htotal) |
+			   FIELD_PREP(V_TOTAL, mode->vtotal));
+	if (ret)
+		return ret;
 
-	tc_write(DP0_STARTVAL,
-		 FIELD_PREP(H_START, left_margin + hsync_len) |
-		 FIELD_PREP(V_START, upper_margin + vsync_len));
+	ret = regmap_write(tc->regmap, DP0_STARTVAL,
+			   FIELD_PREP(H_START, left_margin + hsync_len) |
+			   FIELD_PREP(V_START, upper_margin + vsync_len));
+	if (ret)
+		return ret;
 
-	tc_write(DP0_ACTIVEVAL,
-		 FIELD_PREP(V_ACT, mode->vdisplay) |
-		 FIELD_PREP(H_ACT, mode->hdisplay));
+	ret = regmap_write(tc->regmap, DP0_ACTIVEVAL,
+			   FIELD_PREP(V_ACT, mode->vdisplay) |
+			   FIELD_PREP(H_ACT, mode->hdisplay));
+	if (ret)
+		return ret;
 
 	dp0_syncval = FIELD_PREP(VS_WIDTH, vsync_len) |
 		      FIELD_PREP(HS_WIDTH, hsync_len);
@@ -779,21 +814,25 @@ static int tc_set_video_mode(struct tc_data *tc,
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		dp0_syncval |= SYNCVAL_HS_POL_ACTIVE_LOW;
 
-	tc_write(DP0_SYNCVAL, dp0_syncval);
+	ret = regmap_write(tc->regmap, DP0_SYNCVAL, dp0_syncval);
+	if (ret)
+		return ret;
 
-	tc_write(DPIPXLFMT,
-		 VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
-		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
-		 DPI_BPP_RGB888);
+	ret = regmap_write(tc->regmap, DPIPXLFMT,
+			   VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+			   DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
+			   DPI_BPP_RGB888);
+	if (ret)
+		return ret;
 
-	tc_write(DP0_MISC,
-		 FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
-		 FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
-		 BPC_8);
+	ret = regmap_write(tc->regmap, DP0_MISC,
+			   FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
+			   FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
+			   BPC_8);
+	if (ret)
+		return ret;
 
 	return 0;
-err:
-	return ret;
 }
 
 static int tc_wait_link_training(struct tc_data *tc)
@@ -808,11 +847,11 @@ static int tc_wait_link_training(struct tc_data *tc)
 		return ret;
 	}
 
-	tc_read(DP0_LTSTAT, &value);
+	ret = regmap_read(tc->regmap, DP0_LTSTAT, &value);
+	if (ret)
+		return ret;
 
 	return (value >> 8) & 0x7;
-err:
-	return ret;
 }
 
 static int tc_main_link_enable(struct tc_data *tc)
@@ -827,15 +866,25 @@ static int tc_main_link_enable(struct tc_data *tc)
 
 	dev_dbg(tc->dev, "link enable\n");
 
-	tc_read(DP0CTL, &value);
-	if (WARN_ON(value & DP_EN))
-		tc_write(DP0CTL, 0);
+	ret = regmap_read(tc->regmap, DP0CTL, &value);
+	if (ret)
+		return ret;
+
+	if (WARN_ON(value & DP_EN)) {
+		ret = regmap_write(tc->regmap, DP0CTL, 0);
+		if (ret)
+			return ret;
+	}
 
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc));
+	if (ret)
+		return ret;
 	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
-	tc_write(DP1_SRCCTRL,
+	ret = regmap_write(tc->regmap, DP1_SRCCTRL,
 		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
 		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
+	if (ret)
+		return ret;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -855,27 +904,36 @@ static int tc_main_link_enable(struct tc_data *tc)
 		return -EINVAL;
 	}
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
-	tc_write(SYS_PLLPARAM, value);
+	ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+	if (ret)
+		return ret;
 
 	/* Setup Main Link */
 	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
 	if (tc->link.base.num_lanes == 2)
 		dp_phy_ctrl |= PHY_2LANE;
-	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
+	if (ret)
+		return ret;
 
 	/* PLL setup */
-	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
 	tc_wait_pll_lock(tc);
 
-	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = regmap_write(tc->regmap, DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
 	tc_wait_pll_lock(tc);
 
 	/* Reset/Enable Main Links */
 	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
-	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
 	usleep_range(100, 200);
 	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
-	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
 
 	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
 	if (ret) {
@@ -887,7 +945,7 @@ static int tc_main_link_enable(struct tc_data *tc)
 	/* Set misc: 8 bits per color */
 	ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
 	if (ret)
-		goto err;
+		return ret;
 
 	/*
 	 * ASSR mode
@@ -940,53 +998,71 @@ static int tc_main_link_enable(struct tc_data *tc)
 	/* Clock-Recovery */
 
 	/* Set DPCD 0x102 for Training Pattern 1 */
-	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE |
-		 DP_TRAINING_PATTERN_1);
+	ret = regmap_write(tc->regmap, DP0_SNKLTCTRL,
+			   DP_LINK_SCRAMBLING_DISABLE |
+			   DP_TRAINING_PATTERN_1);
+	if (ret)
+		return ret;
 
-	tc_write(DP0_LTLOOPCTRL,
-		 (15 << 28) |	/* Defer Iteration Count */
-		 (15 << 24) |	/* Loop Iteration Count */
-		 (0xd << 0));	/* Loop Timer Delay */
+	ret = regmap_write(tc->regmap, DP0_LTLOOPCTRL,
+			   (15 << 28) |	/* Defer Iteration Count */
+			   (15 << 24) |	/* Loop Iteration Count */
+			   (0xd << 0));	/* Loop Timer Delay */
+	if (ret)
+		return ret;
 
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
-		 DP0_SRCCTRL_AUTOCORRECT | DP0_SRCCTRL_TP1);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL,
+			   tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+			   DP0_SRCCTRL_AUTOCORRECT |
+			   DP0_SRCCTRL_TP1);
+	if (ret)
+		return ret;
 
 	/* Enable DP0 to start Link Training */
-	tc_write(DP0CTL,
-		 ((tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING) ? EF_EN : 0) |
-		 DP_EN);
+	ret = regmap_write(tc->regmap, DP0CTL,
+			   ((tc->link.base.capabilities &
+			     DP_LINK_CAP_ENHANCED_FRAMING) ? EF_EN : 0) |
+			   DP_EN);
+	if (ret)
+		return ret;
 
 	/* wait */
+
 	ret = tc_wait_link_training(tc);
 	if (ret < 0)
-		goto err;
+		return ret;
 
 	if (ret) {
 		dev_err(tc->dev, "Link training phase 1 failed: %s\n",
 			training_pattern1_errors[ret]);
-		ret = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	/* Channel Equalization */
 
 	/* Set DPCD 0x102 for Training Pattern 2 */
-	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE |
-		 DP_TRAINING_PATTERN_2);
+	ret = regmap_write(tc->regmap, DP0_SNKLTCTRL,
+			   DP_LINK_SCRAMBLING_DISABLE |
+			   DP_TRAINING_PATTERN_2);
+	if (ret)
+		return ret;
 
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
-		 DP0_SRCCTRL_AUTOCORRECT | DP0_SRCCTRL_TP2);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL,
+			   tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+			   DP0_SRCCTRL_AUTOCORRECT |
+			   DP0_SRCCTRL_TP2);
+	if (ret)
+		return ret;
 
 	/* wait */
 	ret = tc_wait_link_training(tc);
 	if (ret < 0)
-		goto err;
+		return ret;
 
 	if (ret) {
 		dev_err(tc->dev, "Link training phase 2 failed: %s\n",
 			training_pattern2_errors[ret]);
-		ret = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	/*
@@ -999,7 +1075,10 @@ static int tc_main_link_enable(struct tc_data *tc)
 	 */
 
 	/* Clear Training Pattern, set AutoCorrect Mode = 1 */
-	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc) |
+			   DP0_SRCCTRL_AUTOCORRECT);
+	if (ret)
+		return ret;
 
 	/* Clear DPCD 0x102 */
 	/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
@@ -1043,7 +1122,7 @@ static int tc_main_link_enable(struct tc_data *tc)
 		dev_err(dev, "0x0205 SINK_STATUS:               0x%02x\n", tmp[3]);
 		dev_err(dev, "0x0206 ADJUST_REQUEST_LANE0_1:    0x%02x\n", tmp[4]);
 		dev_err(dev, "0x0207 ADJUST_REQUEST_LANE2_3:    0x%02x\n", tmp[5]);
-		goto err;
+		return ret;
 	}
 
 	return 0;
@@ -1052,7 +1131,6 @@ static int tc_main_link_enable(struct tc_data *tc)
 	return ret;
 err_dpcd_write:
 	dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
-err:
 	return ret;
 }
 
@@ -1062,12 +1140,11 @@ static int tc_main_link_disable(struct tc_data *tc)
 
 	dev_dbg(tc->dev, "link disable\n");
 
-	tc_write(DP0_SRCCTRL, 0);
-	tc_write(DP0CTL, 0);
+	ret = regmap_write(tc->regmap, DP0_SRCCTRL, 0);
+	if (ret)
+		return ret;
 
-	return 0;
-err:
-	return ret;
+	return regmap_write(tc->regmap, DP0CTL, 0);
 }
 
 static int tc_stream_enable(struct tc_data *tc)
@@ -1082,7 +1159,7 @@ static int tc_stream_enable(struct tc_data *tc)
 		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
 				    1000 * tc->mode.clock);
 		if (ret)
-			goto err;
+			return ret;
 	}
 
 	ret = tc_set_video_mode(tc, &tc->mode);
@@ -1097,7 +1174,9 @@ static int tc_stream_enable(struct tc_data *tc)
 	value = VID_MN_GEN | DP_EN;
 	if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
 		value |= EF_EN;
-	tc_write(DP0CTL, value);
+	ret = regmap_write(tc->regmap, DP0CTL, value);
+	if (ret)
+		return ret;
 	/*
 	 * VID_EN assertion should be delayed by at least N * LSCLK
 	 * cycles from the time VID_MN_GEN is enabled in order to
@@ -1107,36 +1186,35 @@ static int tc_stream_enable(struct tc_data *tc)
 	 */
 	usleep_range(500, 1000);
 	value |= VID_EN;
-	tc_write(DP0CTL, value);
+	ret = regmap_write(tc->regmap, DP0CTL, value);
+	if (ret)
+		return ret;
 	/* Set input interface */
 	value = DP0_AUDSRC_NO_INPUT;
 	if (tc_test_pattern)
 		value |= DP0_VIDSRC_COLOR_BAR;
 	else
 		value |= DP0_VIDSRC_DPI_RX;
-	tc_write(SYSCTRL, value);
+	ret = regmap_write(tc->regmap, SYSCTRL, value);
+	if (ret)
+		return ret;
 
 	return 0;
-err:
-	return ret;
 }
 
 static int tc_stream_disable(struct tc_data *tc)
 {
 	int ret;
-	u32 val;
 
 	dev_dbg(tc->dev, "disable video stream\n");
 
-	tc_read(DP0CTL, &val);
-	val &= ~VID_EN;
-	tc_write(DP0CTL, val);
+	ret = regmap_update_bits(tc->regmap, DP0CTL, VID_EN, 0);
+	if (ret)
+		return ret;
 
 	tc_pxl_pll_dis(tc);
 
 	return 0;
-err:
-	return ret;
 }
 
 static void tc_bridge_pre_enable(struct drm_bridge *bridge)
@@ -1328,7 +1406,9 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
 			return connector_status_unknown;
 	}
 
-	tc_read(GPIOI, &val);
+	ret = regmap_read(tc->regmap, GPIOI, &val);
+	if (ret)
+		return connector_status_unknown;
 
 	conn = val & BIT(tc->hpd_pin);
 
@@ -1336,9 +1416,6 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
 		return connector_status_connected;
 	else
 		return connector_status_disconnected;
-
-err:
-	return connector_status_unknown;
 }
 
 static const struct drm_connector_funcs tc_connector_funcs = {
#11 lore raw

Re: [PATCH v3 05/15] drm/bridge: tc358767: Drop custom tc_write()/tc_read() accessors

Quoted 64 lines · Andrzej Hajda
Quoted 15 lines · Andrey Smirnov

A very unfortunate aspect of tc_write()/tc_read() macro helpers is that they capture quite a bit of context around them and thus require the caller to have magic variables 'ret' and 'tc' as well as label 'err'. That makes a number of code paths rather counterintuitive and somewhat clunky, for example tc_stream_clock_calc() ends up being like this:

      int ret;

      tc_write(DP0_VIDMNGEN1, 32768);

      return 0;
err:
      return ret;
Quoted 4 lines

which is rather surprising when you read the code for the first time. Since those helpers arguably aren't really saving that much code and there's no way of fixing them without making them too verbose to be worth it change the driver code to not use them at all.

On the other side, error checking after every registry access is very annoying and significantly augments the code, makes it redundant and less readable. To avoid it one can cache error state, and do not perform real work until the error is clear. For example with following accessor:

void tc_write(struct tc_data *tc, u32 reg, u32 val){

    int ret;

    if (tc->error) //This check is IMPORTANT

        return;

    ret =regmap_write(...);

    if (ret >= 0)

        return;

    tc->error = ret;

    dev_err(tc->dev, "Error writing register %#x\n", reg);

}

You can safely write code like:

    tc_write(tc, DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN);

    tc_write(tc, DP0_PLLCTRL, PLLUPDATE | PLLEN);

    tc_write(tc, DP1_PLLCTRL, PLLUPDATE | PLLEN);

    if (tc->error) {

        tc->error = 0;

        goto err;

    }
Quoted 2 lines

This is of course loose suggestion.

I am going to have to disagree with you on this one, unfortunately. Using regmap API explicitly definitely makes code more verbose, less readable or more annoying though? Not really from my perspective. With regmap code I know what the code is doing the moment I look at it, with the example above, not so much. I also find it annoying that I now have to remember the tricks that tc_write is pulling internally as well as be mindful of a global-ish error state object. My problem with original code was that a) it traded explicitness for conciseness in a an unfavorable way, which I still think is true for code above b) it didn't provide a comprehensive abstraction completely removing regmap API and still relied on things like regmap_update_bits() explicitly, making the code even more confusing (true for above example as well). I think this driver isn't big enough to have a dedicated person always working on it and it will mostly see occasional commits from somewhat random folks who are coming to the codebase fresh, so creating as little "institutional knowledge", so to speak, in a form of a custom exception-like mechanism and opting for explicit but verbose code seems like a preferable choice.

Anyway, I get it that's it is a loose suggestion :-), just wanted to provide a detailed explanation why I'd rather not go that way.

Thanks,
Andrey Smirnov

#12 lore raw

PATCH v3 6/15 drm/bridge: tc358767: Simplify AUX data read

In reply to Andrey Smirnov

Simplify AUX data read by removing index arithmetic and shifting with a helper functions that does three things:

1. Fetch data from up to 4 32-bit registers from the chip
2. Optionally fix data endianness (not needed on LE hosts)
3. Copy read data into user provided array.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 40 +++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 13 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +27 -13
index e197ce0fb166..da47d81e7109 100644
@@ -321,6 +321,29 @@ static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
 	return 0;
 }
 
+static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
+{
+	u32 auxrdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)];
+	int ret, i, count = DIV_ROUND_UP(size, sizeof(u32));
+
+	ret = regmap_bulk_read(tc->regmap, DP0_AUXRDATA(0), auxrdata, count);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * Our regmap is configured as LE for register data,
+		 * so we need undo any byte swapping that might have
+		 * happened to preserve original byte order.
+		 */
+		le32_to_cpus(&auxrdata[i]);
+	}
+
+	memcpy(data, auxrdata, size);
+
+	return size;
+}
+
 static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
@@ -379,19 +402,10 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 
-	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
-		/* Read data */
-		while (i < size) {
-			if ((i % 4) == 0) {
-				ret = regmap_read(tc->regmap,
-						  DP0_AUXRDATA(i >> 2), &tmp);
-				if (ret)
-					return ret;
-			}
-			buf[i] = tmp & 0xff;
-			tmp = tmp >> 8;
-			i++;
-		}
+	switch (request) {
+	case DP_AUX_NATIVE_READ:
+	case DP_AUX_I2C_READ:
+		return tc_aux_read_data(tc, msg->buffer, size);
 	}
 
 	return size;
Signature · 1 line
2.21.0
Reviewed-by on v3 6/15
#13 lore raw

Re: [PATCH v3 06/15] drm/bridge: tc358767: Simplify AUX data read

Quoted 44 lines · Andrey Smirnov

Simplify AUX data read by removing index arithmetic and shifting with a helper functions that does three things:

1. Fetch data from up to 4 32-bit registers from the chip
2. Optionally fix data endianness (not needed on LE hosts)
3. Copy read data into user provided array.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 40 +++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 13 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +13 -0
index e197ce0fb166..da47d81e7109 100644
@@ -321,6 +321,29 @@ static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
 	return 0;
 }
 
+static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
+{
+	u32 auxrdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)];
+	int ret, i, count = DIV_ROUND_UP(size, sizeof(u32));
+
+	ret = regmap_bulk_read(tc->regmap, DP0_AUXRDATA(0), auxrdata, count);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * Our regmap is configured as LE for register data,
+		 * so we need undo any byte swapping that might have

drivers/gpu/drm/bridge/tc358767.c static int tc_aux_get_status(struct tc_data *tc, u8 *reply) · line 346

Quoted 10 lines
drivers/gpu/drm/bridge/tc358767.c +10 -0
+		 * happened to preserve original byte order.
+		 */
+		le32_to_cpus(&auxrdata[i]);
+	}
+
+	memcpy(data, auxrdata, size);
+
+	return size;
+}
+

Hmm, cannot we just use regmap_raw_read?

Beside this:

 --
Regards
Andrzej

Quoted 27 lines
drivers/gpu/drm/bridge/tc358767.c +4 -13
 static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
@@ -379,19 +402,10 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 
-	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
-		/* Read data */
-		while (i < size) {
-			if ((i % 4) == 0) {
-				ret = regmap_read(tc->regmap,
-						  DP0_AUXRDATA(i >> 2), &tmp);
-				if (ret)
-					return ret;
-			}
-			buf[i] = tmp & 0xff;
-			tmp = tmp >> 8;
-			i++;
-		}
+	switch (request) {
+	case DP_AUX_NATIVE_READ:
+	case DP_AUX_I2C_READ:
+		return tc_aux_read_data(tc, msg->buffer, size);
 	}
 
 	return size;
#14 lore raw

Re: [PATCH v3 06/15] drm/bridge: tc358767: Simplify AUX data read

Quoted 51 lines · Andrzej Hajda
Quoted 49 lines · Andrey Smirnov

Simplify AUX data read by removing index arithmetic and shifting with a helper functions that does three things:

1. Fetch data from up to 4 32-bit registers from the chip
2. Optionally fix data endianness (not needed on LE hosts)
3. Copy read data into user provided array.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 40 +++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 13 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +18 -0
index e197ce0fb166..da47d81e7109 100644
@@ -321,6 +321,29 @@ static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
      return 0;
 }
 
+static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
+{
+     u32 auxrdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)];
+     int ret, i, count = DIV_ROUND_UP(size, sizeof(u32));
+
+     ret = regmap_bulk_read(tc->regmap, DP0_AUXRDATA(0), auxrdata, count);
+     if (ret)
+             return ret;
+
+     for (i = 0; i < count; i++) {
+             /*
+              * Our regmap is configured as LE for register data,
+              * so we need undo any byte swapping that might have
+              * happened to preserve original byte order.
+              */
+             le32_to_cpus(&auxrdata[i]);
+     }
+
Quoted 8 lines

drivers/gpu/drm/bridge/tc358767.c static int tc_aux_get_status(struct tc_data *tc, u8 *reply) · line 346

Quoted 5 lines
drivers/gpu/drm/bridge/tc358767.c +5 -0
+     memcpy(data, auxrdata, size);
+
+     return size;
+}
+

Hmm, cannot we just use regmap_raw_read?

I'll give it a try in v4.

Thanks,
Andrey Smirnov

#15 lore raw

PATCH v3 7/15 drm/bridge: tc358767: Simplify AUX data write

In reply to Andrey Smirnov

Simplify AUX data write by dropping index arithmetic and shifting and replacing it with a call to a helper function that does three things:

1. Copies user-provided data into a write buffer
2. Optionally fixes the endianness of the write buffer (not needed on LE hosts)
3. Transfers contenst of the write buffer to up to 4 32-bit registers on the chip

Note that separate data endianness fix:

    tmp = (tmp << 8) | buf[i];

that was reserved for DP_AUX_I2C_WRITE looks really strange, since it will place data differently depending on the passed user-data size. E.g. for a write of 1 byte, data transferred to the chip would look like:

[byte0] [dummy1] [dummy2] [dummy3]

whereas for a write of 4 bytes we'd get:

[byte3] [byte2] [byte1] [byte0]

Since there's no indication in the datasheet that I2C write buffer should be treated differently than AUX write buffer and no comment in the original code explaining why it was done this way, that special I2C write buffer transformation was dropped in this patch.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 59 +++++++++++++++++++------------
 1 file changed, 37 insertions(+), 22 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +37 -22
index da47d81e7109..260fbcd0271e 100644
@@ -321,6 +321,32 @@ static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
 	return 0;
 }
 
+static int tc_aux_write_data(struct tc_data *tc, const void *data,
+			     size_t size)
+{
+	u32 auxwdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)] = { 0 };
+	int ret, i, count = DIV_ROUND_UP(size, sizeof(u32));
+
+	memcpy(auxwdata, data, size);
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * Our regmap is configured as LE
+		 * for register data, so we need
+		 * undo any byte swapping that will
+		 * happened to preserve original
+		 * byte order.
+		 */
+		cpu_to_le32s(&auxwdata[i]);
+	}
+
+	ret = regmap_bulk_write(tc->regmap, DP0_AUXWDATA(0), auxwdata, count);
+	if (ret)
+		return ret;
+
+	return size;
+}
+
 static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
 {
 	u32 auxrdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)];
@@ -350,9 +376,6 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	struct tc_data *tc = aux_to_tc(aux);
 	size_t size = min_t(size_t, 8, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
-	u8 *buf = msg->buffer;
-	u32 tmp = 0;
-	int i = 0;
 	int ret;
 
 	if (size == 0)
@@ -362,25 +385,17 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 
-	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
-		/* Store data */
-		while (i < size) {
-			if (request == DP_AUX_NATIVE_WRITE)
-				tmp = tmp | (buf[i] << (8 * (i & 0x3)));
-			else
-				tmp = (tmp << 8) | buf[i];
-			i++;
-			if (((i % 4) == 0) || (i == size)) {
-				ret = regmap_write(tc->regmap,
-						   DP0_AUXWDATA((i - 1) >> 2),
-						   tmp);
-				if (ret)
-					return ret;
-				tmp = 0;
-			}
-		}
-	} else if (request != DP_AUX_I2C_READ &&
-		   request != DP_AUX_NATIVE_READ) {
+	switch (request) {
+	case DP_AUX_NATIVE_READ:
+	case DP_AUX_I2C_READ:
+		break;
+	case DP_AUX_NATIVE_WRITE:
+	case DP_AUX_I2C_WRITE:
+		ret = tc_aux_write_data(tc, msg->buffer, size);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
 		return -EINVAL;
 	}
 
Signature · 1 line
2.21.0
Reviewed-by on v3 7/15
#16 lore raw

Re: [PATCH v3 07/15] drm/bridge: tc358767: Simplify AUX data write

Quoted 68 lines · Andrey Smirnov

Simplify AUX data write by dropping index arithmetic and shifting and replacing it with a call to a helper function that does three things:

1. Copies user-provided data into a write buffer
2. Optionally fixes the endianness of the write buffer (not needed on LE hosts)
3. Transfers contenst of the write buffer to up to 4 32-bit registers on the chip

Note that separate data endianness fix:

    tmp = (tmp << 8) | buf[i];

that was reserved for DP_AUX_I2C_WRITE looks really strange, since it will place data differently depending on the passed user-data size. E.g. for a write of 1 byte, data transferred to the chip would look like:

[byte0] [dummy1] [dummy2] [dummy3]

whereas for a write of 4 bytes we'd get:

[byte3] [byte2] [byte1] [byte0]

Since there's no indication in the datasheet that I2C write buffer should be treated differently than AUX write buffer and no comment in the original code explaining why it was done this way, that special I2C write buffer transformation was dropped in this patch.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 59 +++++++++++++++++++------------
 1 file changed, 37 insertions(+), 22 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +15 -0
index da47d81e7109..260fbcd0271e 100644
@@ -321,6 +321,32 @@ static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
 	return 0;
 }
 
+static int tc_aux_write_data(struct tc_data *tc, const void *data,
+			     size_t size)
+{
+	u32 auxwdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)] = { 0 };
+	int ret, i, count = DIV_ROUND_UP(size, sizeof(u32));
+
+	memcpy(auxwdata, data, size);
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * Our regmap is configured as LE
+		 * for register data, so we need
+		 * undo any byte swapping that will
+		 * happened to preserve original
+		 * byte order.

drivers/gpu/drm/bridge/tc358767.c static int tc_aux_get_status(struct tc_data *tc, u8 *reply) · line 348

Quoted 10 lines
drivers/gpu/drm/bridge/tc358767.c +10 -0
+		 */
+		cpu_to_le32s(&auxwdata[i]);
+	}
+
+	ret = regmap_bulk_write(tc->regmap, DP0_AUXWDATA(0), auxwdata, count);
+	if (ret)
+		return ret;
+
+	return size;
+}

As prevoiusly maybe regmap_raw_write.

Beside this:

 --
Regards
Andrzej

Quoted 51 lines
drivers/gpu/drm/bridge/tc358767.c +12 -22
+
 static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
 {
 	u32 auxrdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)];
@@ -350,9 +376,6 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	struct tc_data *tc = aux_to_tc(aux);
 	size_t size = min_t(size_t, 8, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
-	u8 *buf = msg->buffer;
-	u32 tmp = 0;
-	int i = 0;
 	int ret;
 
 	if (size == 0)
@@ -362,25 +385,17 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 
-	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
-		/* Store data */
-		while (i < size) {
-			if (request == DP_AUX_NATIVE_WRITE)
-				tmp = tmp | (buf[i] << (8 * (i & 0x3)));
-			else
-				tmp = (tmp << 8) | buf[i];
-			i++;
-			if (((i % 4) == 0) || (i == size)) {
-				ret = regmap_write(tc->regmap,
-						   DP0_AUXWDATA((i - 1) >> 2),
-						   tmp);
-				if (ret)
-					return ret;
-				tmp = 0;
-			}
-		}
-	} else if (request != DP_AUX_I2C_READ &&
-		   request != DP_AUX_NATIVE_READ) {
+	switch (request) {
+	case DP_AUX_NATIVE_READ:
+	case DP_AUX_I2C_READ:
+		break;
+	case DP_AUX_NATIVE_WRITE:
+	case DP_AUX_I2C_WRITE:
+		ret = tc_aux_write_data(tc, msg->buffer, size);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
 		return -EINVAL;
 	}
 
#17 lore raw

PATCH v3 8/15 drm/bridge: tc358767: Increase AUX transfer length limit

In reply to Andrey Smirnov

According to the datasheet tc358767 can transfer up to 16 bytes via its AUX channel, so the artificial limit of 8 apperas to be too low. However only up to 15-bytes seem to be actually supported and trying to use 16-byte transfers results in transfers failing sporadically (with bogus status in case of I2C transfers), so limit it to 15.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tc358767.c +1 -1
index 260fbcd0271e..0125e2f7e076 100644
@@ -374,7 +374,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
 	struct tc_data *tc = aux_to_tc(aux);
-	size_t size = min_t(size_t, 8, msg->size);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
 	int ret;
 
Signature · 1 line
2.21.0
Reviewed-by on v3 8/15
#18 lore raw

Re: [PATCH v3 08/15] drm/bridge: tc358767: Increase AUX transfer length limit

Quoted 9 lines · Andrey Smirnov

According to the datasheet tc358767 can transfer up to 16 bytes via its AUX channel, so the artificial limit of 8 apperas to be too low. However only up to 15-bytes seem to be actually supported and trying to use 16-byte transfers results in transfers failing sporadically (with bogus status in case of I2C transfers), so limit it to 15.

Please remove Archit's mail (from all patches), it is no longer valid.

 --
Regards
Andrzej

Quoted 27 lines
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tc358767.c +1 -1
index 260fbcd0271e..0125e2f7e076 100644
@@ -374,7 +374,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
 	struct tc_data *tc = aux_to_tc(aux);
-	size_t size = min_t(size_t, 8, msg->size);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
 	int ret;
 
#19 lore raw

PATCH v3 9/15 drm/bridge: tc358767: Use reported AUX transfer size

In reply to Andrey Smirnov

Don't assume that requested data transfer size is the same as amount of data that was transferred. Change the code to get that information from DP0_AUXSTATUS instead.

Since the check for AUX_BUSY in tc_aux_get_status() is pointless (it will always called after tc_aux_wait_busy()) and there's only one user of it, inline its code into tc_aux_transfer() instead of trying to accommodate the change above.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 40 ++++++++++---------------------
 1 file changed, 12 insertions(+), 28 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +12 -28
index 0125e2f7e076..90ec33caacbc 100644
@@ -152,10 +152,10 @@
 #define DP0_AUXWDATA(i)		(0x066c + (i) * 4)
 #define DP0_AUXRDATA(i)		(0x067c + (i) * 4)
 #define DP0_AUXSTATUS		0x068c
-#define AUX_STATUS_MASK			0xf0
-#define AUX_STATUS_SHIFT		4
-#define AUX_TIMEOUT			BIT(1)
-#define AUX_BUSY			BIT(0)
+#define AUX_BYTES		GENMASK(15, 8)
+#define AUX_STATUS		GENMASK(7, 4)
+#define AUX_TIMEOUT		BIT(1)
+#define AUX_BUSY		BIT(0)
 #define DP0_AUXI2CADR		0x0698
 
 /* Link Training */
@@ -298,29 +298,6 @@ static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
 			       1000, 1000 * timeout_ms);
 }
 
-static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
-{
-	int ret;
-	u32 value;
-
-	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &value);
-	if (ret < 0)
-		return ret;
-
-	if (value & AUX_BUSY) {
-		dev_err(tc->dev, "aux busy!\n");
-		return -EBUSY;
-	}
-
-	if (value & AUX_TIMEOUT) {
-		dev_err(tc->dev, "aux access timeout!\n");
-		return -ETIMEDOUT;
-	}
-
-	*reply = (value & AUX_STATUS_MASK) >> AUX_STATUS_SHIFT;
-	return 0;
-}
-
 static int tc_aux_write_data(struct tc_data *tc, const void *data,
 			     size_t size)
 {
@@ -376,6 +353,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	struct tc_data *tc = aux_to_tc(aux);
 	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
+	u32 auxstatus;
 	int ret;
 
 	if (size == 0)
@@ -413,10 +391,16 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 
-	ret = tc_aux_get_status(tc, &msg->reply);
+	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &auxstatus);
 	if (ret)
 		return ret;
 
+	if (auxstatus & AUX_TIMEOUT)
+		return -ETIMEDOUT;
+
+	size = FIELD_GET(AUX_BYTES, auxstatus);
+	msg->reply = FIELD_GET(AUX_STATUS, auxstatus);
+
 	switch (request) {
 	case DP_AUX_NATIVE_READ:
 	case DP_AUX_I2C_READ:
Signature · 1 line
2.21.0
#20 lore raw

PATCH v3 10/15 drm/bridge: tc358767: Add support for address-only I2C transfers

In reply to Andrey Smirnov

Transfer size of zero means a request to do an address-only transfer. Since the HW support this, we probably shouldn't be just ignoring such requests. While at it allow DP_AUX_I2C_MOT flag to pass through, since it is supported by the HW as well.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +23 -7
index 90ec33caacbc..7b84fbb72973 100644
@@ -145,6 +145,8 @@
 
 /* AUX channel */
 #define DP0_AUXCFG0		0x0660
+#define DP0_AUXCFG0_BSIZE	GENMASK(11, 8)
+#define DP0_AUXCFG0_ADDR_ONLY	BIT(4)
 #define DP0_AUXCFG1		0x0664
 #define AUX_RX_FILTER_EN		BIT(16)
 
@@ -347,6 +349,18 @@ static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
 	return size;
 }
 
+static u32 tc_auxcfg0(struct drm_dp_aux_msg *msg, size_t size)
+{
+	u32 auxcfg0 = msg->request;
+
+	if (size)
+		auxcfg0 |= FIELD_PREP(DP0_AUXCFG0_BSIZE, size - 1);
+	else
+		auxcfg0 |= DP0_AUXCFG0_ADDR_ONLY;
+
+	return auxcfg0;
+}
+
 static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
@@ -356,9 +370,6 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	u32 auxstatus;
 	int ret;
 
-	if (size == 0)
-		return 0;
-
 	ret = tc_aux_wait_busy(tc, 100);
 	if (ret)
 		return ret;
@@ -382,8 +393,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 	/* Start transfer */
-	ret = regmap_write(tc->regmap, DP0_AUXCFG0,
-			   ((size - 1) << 8) | request);
+	ret = regmap_write(tc->regmap, DP0_AUXCFG0, tc_auxcfg0(msg, size));
 	if (ret)
 		return ret;
 
@@ -397,8 +407,14 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 
 	if (auxstatus & AUX_TIMEOUT)
 		return -ETIMEDOUT;
-
-	size = FIELD_GET(AUX_BYTES, auxstatus);
+	/*
+	 * For some reason address-only DP_AUX_I2C_WRITE (MOT), still
+	 * reports 1 byte transferred in its status. To deal we that
+	 * we ignore aux_bytes field if we know that this was an
+	 * address-only transfer
+	 */
+	if (size)
+		size = FIELD_GET(AUX_BYTES, auxstatus);
 	msg->reply = FIELD_GET(AUX_STATUS, auxstatus);
 
 	switch (request) {
Signature · 1 line
2.21.0
#21 lore raw

PATCH v3 11/15 drm/bridge: tc358767: Introduce tc_set_syspllparam()

In reply to Andrey Smirnov

Move common code converting clock rate to an appropriate constant and configuring SYS_PLLPARAM register into a separate routine and convert the rest of the code to use it. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Chris Healy <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 46 +++++++++++--------------------
 1 file changed, 16 insertions(+), 30 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +16 -30
index 7b84fbb72973..c58714daa0a1 100644
@@ -601,35 +601,40 @@ static int tc_stream_clock_calc(struct tc_data *tc)
 	return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
 }
 
-static int tc_aux_link_setup(struct tc_data *tc)
+static int tc_set_syspllparam(struct tc_data *tc)
 {
 	unsigned long rate;
-	u32 dp0_auxcfg1;
-	u32 value;
-	int ret;
+	u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
 	case 38400000:
-		value = REF_FREQ_38M4;
+		pllparam |= REF_FREQ_38M4;
 		break;
 	case 26000000:
-		value = REF_FREQ_26M;
+		pllparam |= REF_FREQ_26M;
 		break;
 	case 19200000:
-		value = REF_FREQ_19M2;
+		pllparam |= REF_FREQ_19M2;
 		break;
 	case 13000000:
-		value = REF_FREQ_13M;
+		pllparam |= REF_FREQ_13M;
 		break;
 	default:
 		dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
 		return -EINVAL;
 	}
 
+	return regmap_write(tc->regmap, SYS_PLLPARAM, pllparam);
+}
+
+static int tc_aux_link_setup(struct tc_data *tc)
+{
+	int ret;
+	u32 dp0_auxcfg1;
+
 	/* Setup DP-PHY / PLL */
-	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
-	ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+	ret = tc_set_syspllparam(tc);
 	if (ret)
 		goto err;
 
@@ -887,7 +892,6 @@ static int tc_main_link_enable(struct tc_data *tc)
 {
 	struct drm_dp_aux *aux = &tc->aux;
 	struct device *dev = tc->dev;
-	unsigned int rate;
 	u32 dp_phy_ctrl;
 	u32 value;
 	int ret;
@@ -915,25 +919,7 @@ static int tc_main_link_enable(struct tc_data *tc)
 	if (ret)
 		return ret;
 
-	rate = clk_get_rate(tc->refclk);
-	switch (rate) {
-	case 38400000:
-		value = REF_FREQ_38M4;
-		break;
-	case 26000000:
-		value = REF_FREQ_26M;
-		break;
-	case 19200000:
-		value = REF_FREQ_19M2;
-		break;
-	case 13000000:
-		value = REF_FREQ_13M;
-		break;
-	default:
-		return -EINVAL;
-	}
-	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
-	ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+	ret = tc_set_syspllparam(tc);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.21.0
#22 lore raw

PATCH v3 12/15 drm/bridge: tc358767: Introduce tc_pllupdate_pllen()

In reply to Andrey Smirnov

tc_wait_pll_lock() is always called as a follow-up for updating PLLUPDATE and PLLEN bit of a given PLL control register. To simplify things, merge the two operation into a single helper function tc_pllupdate_pllen() and convert the rest of the code to use it. No functional change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +14 -16
index c58714daa0a1..a04401cf2a92 100644
@@ -463,10 +463,18 @@ static u32 tc_srcctrl(struct tc_data *tc)
 	return reg;
 }
 
-static void tc_wait_pll_lock(struct tc_data *tc)
+static int tc_pllupdate_pllen(struct tc_data *tc, unsigned int pllctrl)
 {
+	int ret;
+
+	ret = regmap_write(tc->regmap, pllctrl, PLLUPDATE | PLLEN);
+	if (ret)
+		return ret;
+
 	/* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
 	usleep_range(3000, 6000);
+
+	return 0;
 }
 
 static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
@@ -566,13 +574,7 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 		return ret;
 
 	/* Force PLL parameter update and disable bypass */
-	ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLUPDATE | PLLEN);
-	if (ret)
-		return ret;
-
-	tc_wait_pll_lock(tc);
-
-	return 0;
+	return tc_pllupdate_pllen(tc, PXL_PLLCTRL);
 }
 
 static int tc_pxl_pll_dis(struct tc_data *tc)
@@ -645,15 +647,13 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	 * Initially PLLs are in bypass. Force PLL parameter update,
 	 * disable PLL bypass, enable PLL
 	 */
-	ret = regmap_write(tc->regmap, DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = tc_pllupdate_pllen(tc, DP0_PLLCTRL);
 	if (ret)
 		goto err;
-	tc_wait_pll_lock(tc);
 
-	ret = regmap_write(tc->regmap, DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = tc_pllupdate_pllen(tc, DP1_PLLCTRL);
 	if (ret)
 		goto err;
-	tc_wait_pll_lock(tc);
 
 	ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000);
 	if (ret == -ETIMEDOUT) {
@@ -933,15 +933,13 @@ static int tc_main_link_enable(struct tc_data *tc)
 		return ret;
 
 	/* PLL setup */
-	ret = regmap_write(tc->regmap, DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = tc_pllupdate_pllen(tc, DP0_PLLCTRL);
 	if (ret)
 		return ret;
-	tc_wait_pll_lock(tc);
 
-	ret = regmap_write(tc->regmap, DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	ret = tc_pllupdate_pllen(tc, DP1_PLLCTRL);
 	if (ret)
 		return ret;
-	tc_wait_pll_lock(tc);
 
 	/* Reset/Enable Main Links */
 	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
Signature · 1 line
2.21.0
#23 lore raw

PATCH v3 13/15 drm/bridge: tc358767: Simplify tc_aux_wait_busy()

In reply to Andrey Smirnov

We never pass anything but 100 as timeout_ms to tc_aux_wait_busy(), so we may as well hardcode that value and simplify function's signature.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +4 -5
index a04401cf2a92..4fe7641f84ee 100644
@@ -294,10 +294,9 @@ static inline int tc_poll_timeout(struct tc_data *tc, unsigned int addr,
 					sleep_us, timeout_us);
 }
 
-static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
+static int tc_aux_wait_busy(struct tc_data *tc)
 {
-	return tc_poll_timeout(tc, DP0_AUXSTATUS, AUX_BUSY, 0,
-			       1000, 1000 * timeout_ms);
+	return tc_poll_timeout(tc, DP0_AUXSTATUS, AUX_BUSY, 0, 1000, 100000);
 }
 
 static int tc_aux_write_data(struct tc_data *tc, const void *data,
@@ -370,7 +369,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	u32 auxstatus;
 	int ret;
 
-	ret = tc_aux_wait_busy(tc, 100);
+	ret = tc_aux_wait_busy(tc);
 	if (ret)
 		return ret;
 
@@ -397,7 +396,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 
-	ret = tc_aux_wait_busy(tc, 100);
+	ret = tc_aux_wait_busy(tc);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.21.0
#24 lore raw

PATCH v3 14/15 drm/bridge: tc358767: Drop unnecessary 8 byte buffer

In reply to Andrey Smirnov

tc_get_display_props() never reads more than a byte via AUX, so there's no need to reserve 8 for that purpose. No function change intended.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +6 -7
index 4fe7641f84ee..41a976dff13b 100644
@@ -680,8 +680,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 static int tc_get_display_props(struct tc_data *tc)
 {
 	int ret;
-	/* temp buffer */
-	u8 tmp[8];
+	u8 reg;
 
 	/* Read DP Rx Link Capability */
 	ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
@@ -697,21 +696,21 @@ static int tc_get_display_props(struct tc_data *tc)
 		tc->link.base.num_lanes = 2;
 	}
 
-	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, &reg);
 	if (ret < 0)
 		goto err_dpcd_read;
-	tc->link.spread = tmp[0] & DP_MAX_DOWNSPREAD_0_5;
+	tc->link.spread = reg & DP_MAX_DOWNSPREAD_0_5;
 
-	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, tmp);
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, &reg);
 	if (ret < 0)
 		goto err_dpcd_read;
 
 	tc->link.scrambler_dis = false;
 	/* read assr */
-	ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, tmp);
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, &reg);
 	if (ret < 0)
 		goto err_dpcd_read;
-	tc->link.assr = tmp[0] & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+	tc->link.assr = reg & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
 
 	dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
 		tc->link.base.revision >> 4, tc->link.base.revision & 0x0f,
Signature · 1 line
2.21.0
#25 lore raw

PATCH v3 15/15 drm/bridge: tc358767: Replace magic number in tc_main_link_enable()

In reply to Andrey Smirnov

We don't need 8 byte array, DP_LINK_STATUS_SIZE (6) should be enough. This also gets rid of a magic number as a bonus.

Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc Andrey Gusakov <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Cory Tusar <[email protected]>
Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tc358767.c +1 -1
index 41a976dff13b..cf38f943e656 100644
@@ -893,7 +893,7 @@ static int tc_main_link_enable(struct tc_data *tc)
 	u32 dp_phy_ctrl;
 	u32 value;
 	int ret;
-	u8 tmp[8];
+	u8 tmp[DP_LINK_STATUS_SIZE];
 
 	dev_dbg(tc->dev, "link enable\n");
 
Signature · 1 line
2.21.0