drm/tegra: dpaux: Make VDD supply optional
PATCH 1/1 drm/tegra: dpaux: Make VDD supply optional
From: Thierry Reding <[email protected]>
The VDD supply is only needed to supply power to eDP panels connected to DPAUX. Technically that supply should be dealt with in the panel driver, but for backwards-compatibility we need to keep this around anyway.
Also as a bit of background: the reason for why this supply is attached to DPAUX is to make sure the panel is properly powered early on so that it can generate a hotplug pulse at the appropriate time. This may no longer be required given the support for deferred fbdev setup that was "recently" introduced in DRM/KMS.
Signed-off-by Thierry Reding <[email protected]>
--- drivers/gpu/drm/tegra/dpaux.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/gpu/drm/tegra/dpaux.c +9 -4
@@ -485,11 +485,16 @@ static int tegra_dpaux_probe(struct platform_device *pdev)return err; } - dpaux->vdd =devm_regulator_get (&pdev->dev,"vdd" ); + dpaux->vdd =devm_regulator_get_optional (&pdev->dev,"vdd" );if (IS_ERR (dpaux->vdd)) { -dev_err (&pdev->dev,"failed to get VDD supply: %ld\n" , -PTR_ERR (dpaux->vdd)); -return PTR_ERR (dpaux->vdd); +if (PTR_ERR (dpaux->vdd) != -ENODEV ) { +if (PTR_ERR (dpaux->vdd) != -EPROBE_DEFER ) +dev_err (&pdev->dev, +"failed to get VDD supply: %ld\n" , +PTR_ERR (dpaux->vdd)); + +return PTR_ERR (dpaux->vdd); + } }platform_set_drvdata (pdev, dpaux);
Signature · 6 lines
2.21.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel