Skip to contentSkip to conversation

phy: meson-g12a-usb3-pcie: disable locking for cr_regmap

PATCH In review Neil Armstrong 3 participants 4 messages Jun 5, 2019 – Jun 25, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 phy: meson-g12a-usb3-pcie: disable locking for cr_regmap

Locking is not needed for the phy_g12a_usb3_pcie_cr_bus_read/write() and currently it causes the following BUG because of the usage of the regmap_read_poll_timeout() running in spinlock_irq, configured by regmap fast_io.

Simply disable locking in the cr_regmap config since it's only used from the PHY init callback function.

BUG: sleeping function called from invalid context at drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c:85
in_atomic(): 1, irqs_disabled(): 128, pid: 60, name: kworker/3:1
[snip]
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x190
 show_stack+0x14/0x20
 dump_stack+0x90/0xb4
 ___might_sleep+0xec/0x110
 __might_sleep+0x50/0x88
 phy_g12a_usb3_pcie_cr_bus_addr.isra.0+0x80/0x1a8
 phy_g12a_usb3_pcie_cr_bus_read+0x34/0x1d8
 _regmap_read+0x60/0xe0
 _regmap_update_bits+0xc4/0x110
 regmap_update_bits_base+0x60/0x90
 phy_g12a_usb3_pcie_init+0xdc/0x210
 phy_init+0x74/0xd0
 dwc3_meson_g12a_probe+0x2cc/0x4d0
 platform_drv_probe+0x50/0xa0
 really_probe+0x20c/0x3b8
 driver_probe_device+0x68/0x150
 __device_attach_driver+0xa8/0x170
 bus_for_each_drv+0x64/0xc8
 __device_attach+0xd8/0x158
 device_initial_probe+0x10/0x18
 bus_probe_device+0x90/0x98
 deferred_probe_work_func+0x94/0xe8
 process_one_work+0x1e0/0x338
 worker_thread+0x230/0x458
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1c
Fixes 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
---
 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +1 -1
index 6233a7979a93..ac322d643c7a 100644
@@ -188,7 +188,7 @@ static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
 	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
 	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
 	.max_register = 0xffff,
-	.fast_io = true,
+	.disable_locking = true,
 };
 
 static int phy_g12a_usb3_init(struct phy *phy)
Signature · 1 line
2.21.0
maintainer Tested-by on v2 1/1
#1 lore raw
Quoted 39 lines · Neil Armstrong

Locking is not needed for the phy_g12a_usb3_pcie_cr_bus_read/write() and currently it causes the following BUG because of the usage of the regmap_read_poll_timeout() running in spinlock_irq, configured by regmap fast_io.

Simply disable locking in the cr_regmap config since it's only used from the PHY init callback function.

BUG: sleeping function called from invalid context at drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c:85
in_atomic(): 1, irqs_disabled(): 128, pid: 60, name: kworker/3:1
[snip]
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x190
 show_stack+0x14/0x20
 dump_stack+0x90/0xb4
 ___might_sleep+0xec/0x110
 __might_sleep+0x50/0x88
 phy_g12a_usb3_pcie_cr_bus_addr.isra.0+0x80/0x1a8
 phy_g12a_usb3_pcie_cr_bus_read+0x34/0x1d8
 _regmap_read+0x60/0xe0
 _regmap_update_bits+0xc4/0x110
 regmap_update_bits_base+0x60/0x90
 phy_g12a_usb3_pcie_init+0xdc/0x210
 phy_init+0x74/0xd0
 dwc3_meson_g12a_probe+0x2cc/0x4d0
 platform_drv_probe+0x50/0xa0
 really_probe+0x20c/0x3b8
 driver_probe_device+0x68/0x150
 __device_attach_driver+0xa8/0x170
 bus_for_each_drv+0x64/0xc8
 __device_attach+0xd8/0x158
 device_initial_probe+0x10/0x18
 bus_probe_device+0x90/0x98
 deferred_probe_work_func+0x94/0xe8
 process_one_work+0x1e0/0x338
 worker_thread+0x230/0x458
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1c
Quoted 2 lines
Fixes 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
#2 lore raw
In reply to Neil Armstrong

Hi Kishon,

Quoted 6 lines · Neil Armstrong

Locking is not needed for the phy_g12a_usb3_pcie_cr_bus_read/write() and currently it causes the following BUG because of the usage of the regmap_read_poll_timeout() running in spinlock_irq, configured by regmap fast_io.

Simply disable locking in the cr_regmap config since it's only used from the PHY init callback function.

Gentle ping,
Is the commit log right now ?

Thanks,
Neil

Quoted 53 lines
BUG: sleeping function called from invalid context at drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c:85
in_atomic(): 1, irqs_disabled(): 128, pid: 60, name: kworker/3:1
[snip]
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x190
 show_stack+0x14/0x20
 dump_stack+0x90/0xb4
 ___might_sleep+0xec/0x110
 __might_sleep+0x50/0x88
 phy_g12a_usb3_pcie_cr_bus_addr.isra.0+0x80/0x1a8
 phy_g12a_usb3_pcie_cr_bus_read+0x34/0x1d8
 _regmap_read+0x60/0xe0
 _regmap_update_bits+0xc4/0x110
 regmap_update_bits_base+0x60/0x90
 phy_g12a_usb3_pcie_init+0xdc/0x210
 phy_init+0x74/0xd0
 dwc3_meson_g12a_probe+0x2cc/0x4d0
 platform_drv_probe+0x50/0xa0
 really_probe+0x20c/0x3b8
 driver_probe_device+0x68/0x150
 __device_attach_driver+0xa8/0x170
 bus_for_each_drv+0x64/0xc8
 __device_attach+0xd8/0x158
 device_initial_probe+0x10/0x18
 bus_probe_device+0x90/0x98
 deferred_probe_work_func+0x94/0xe8
 process_one_work+0x1e0/0x338
 worker_thread+0x230/0x458
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1con,
Fixes 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
---
 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +1 -1
index 6233a7979a93..ac322d643c7a 100644
@@ -188,7 +188,7 @@ static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
 	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
 	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
 	.max_register = 0xffff,
-	.fast_io = true,
+	.disable_locking = true,
 };
 
 static int phy_g12a_usb3_init(struct phy *phy)
#3 lore raw
Quoted 7 lines · Neil Armstrong

Hi Kishon,

Quoted 4 lines · Neil Armstrong

Locking is not needed for the phy_g12a_usb3_pcie_cr_bus_read/write() and currently it causes the following BUG because of the usage of the regmap_read_poll_timeout() running in spinlock_irq, configured by regmap fast_io.

Quoted 5 lines
Quoted 2 lines

Simply disable locking in the cr_regmap config since it's only used from the PHY init callback function.

Gentle ping,
Is the commit log right now ?

merged now, thanks!

-Kishon

Quoted 58 lines

Thanks,
Neil

Quoted 53 lines
BUG: sleeping function called from invalid context at drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c:85
in_atomic(): 1, irqs_disabled(): 128, pid: 60, name: kworker/3:1
[snip]
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x190
 show_stack+0x14/0x20
 dump_stack+0x90/0xb4
 ___might_sleep+0xec/0x110
 __might_sleep+0x50/0x88
 phy_g12a_usb3_pcie_cr_bus_addr.isra.0+0x80/0x1a8
 phy_g12a_usb3_pcie_cr_bus_read+0x34/0x1d8
 _regmap_read+0x60/0xe0
 _regmap_update_bits+0xc4/0x110
 regmap_update_bits_base+0x60/0x90
 phy_g12a_usb3_pcie_init+0xdc/0x210
 phy_init+0x74/0xd0
 dwc3_meson_g12a_probe+0x2cc/0x4d0
 platform_drv_probe+0x50/0xa0
 really_probe+0x20c/0x3b8
 driver_probe_device+0x68/0x150
 __device_attach_driver+0xa8/0x170
 bus_for_each_drv+0x64/0xc8
 __device_attach+0xd8/0x158
 device_initial_probe+0x10/0x18
 bus_probe_device+0x90/0x98
 deferred_probe_work_func+0x94/0xe8
 process_one_work+0x1e0/0x338
 worker_thread+0x230/0x458
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1con,
Fixes 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
---
 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +1 -1
index 6233a7979a93..ac322d643c7a 100644
@@ -188,7 +188,7 @@ static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
 	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
 	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
 	.max_register = 0xffff,
-	.fast_io = true,
+	.disable_locking = true,
 };
 
 static int phy_g12a_usb3_init(struct phy *phy)