perf_pmu: Remove redundant check for engine
PATCH 1/1 perf_pmu: Remove redundant check for engine
__for_each_physical_engine already iterates over only engines that exist, we don't need to check again that they exist.
Removing the check also makes their respective subtest_groups not needed.
--- tests/perf_pmu.c | 223 ++++++++++++++++++++++------------------------- 1 file changed, 105 insertions(+), 118 deletions(-)
tests/perf_pmu.c +105 -118
@@ -1712,116 +1712,110 @@ igt_main igt_subtest_f("init-sema-%s", e->name)init (fd, e,I915_SAMPLE_SEMA ); - igt_subtest_group { - igt_fixture { -gem_context_has_engine (fd,0 , e->flags); - } +/** +* Test that engines show no load when idle. +*/ + igt_subtest_f("idle-%s", e->name) +single (fd, e,0 ); -/** -* Test that engines show no load when idle. -*/ - igt_subtest_f("idle-%s", e->name) -single (fd, e,0 ); - -/** -* Test that a single engine reports load correctly. -*/ - igt_subtest_f("busy-%s", e->name) -single (fd, e,TEST_BUSY ); - igt_subtest_f("busy-idle-%s", e->name) -single (fd, e,TEST_BUSY |TEST_TRAILING_IDLE ); - -/** -* Test that when one engine is loaded other report no -* load. -*/ - igt_subtest_f("busy-check-all-%s", e->name) -busy_check_all (fd, e, num_engines,TEST_BUSY ); - igt_subtest_f("busy-idle-check-all-%s", e->name) -busy_check_all (fd, e, num_engines, -TEST_BUSY |TEST_TRAILING_IDLE ); - -/** -* Test that when all except one engine are loaded all -* loads are correctly reported. -*/ - igt_subtest_f("most-busy-check-all-%s", e->name) -most_busy_check_all (fd, e, num_engines, -TEST_BUSY ); - igt_subtest_f("most-busy-idle-check-all-%s", e->name) -most_busy_check_all (fd, e, num_engines, -TEST_BUSY | -TEST_TRAILING_IDLE ); - -/** -* Test that semphore counters report no activity on -* idle or busy engines. -*/ - igt_subtest_f("idle-no-semaphores-%s", e->name) -no_sema (fd, e,0 ); - - igt_subtest_f("busy-no-semaphores-%s", e->name) -no_sema (fd, e,TEST_BUSY ); - - igt_subtest_f("busy-idle-no-semaphores-%s", e->name) -no_sema (fd, e,TEST_BUSY |TEST_TRAILING_IDLE ); - -/** -* Test that semaphore waits are correctly reported. -*/ - igt_subtest_f("semaphore-wait-%s", e->name) -sema_wait (fd, e,TEST_BUSY ); - - igt_subtest_f("semaphore-wait-idle-%s", e->name) -sema_wait (fd, e, -TEST_BUSY |TEST_TRAILING_IDLE ); - -/** -* Check that two perf clients do not influence each -* others observations. -*/ - igt_subtest_f("multi-client-%s", e->name) -multi_client (fd, e); - -/** -* Check that reported usage is correct when PMU is -* enabled after the batch is running. -*/ - igt_subtest_f("busy-start-%s", e->name) -busy_start (fd, e); - -/** -* Check that reported usage is correct when PMU is -* enabled after two batches are running. -*/ - igt_subtest_f("busy-double-start-%s", e->name) { -gem_require_contexts (fd); -busy_double_start (fd, e); - } +/** +* Test that a single engine reports load correctly. +*/ + igt_subtest_f("busy-%s", e->name) +single (fd, e,TEST_BUSY ); + igt_subtest_f("busy-idle-%s", e->name) +single (fd, e,TEST_BUSY |TEST_TRAILING_IDLE ); -/** -* Check that the PMU can be safely enabled in face of -* interrupt-heavy engine load. -*/ - igt_subtest_f("enable-race-%s", e->name) -test_enable_race (fd, e); - -/** -* Check engine busyness accuracy is as expected. -*/ -for (i =0 ; i <ARRAY_SIZE (pct); i++) { -igt_subtest_f ("busy-accuracy-%u-%s" , - pct[i], e->name) -accuracy (fd, e, pct[i],10 ); - } +/** +* Test that when one engine is loaded other report no +* load. +*/ + igt_subtest_f("busy-check-all-%s", e->name) +busy_check_all (fd, e, num_engines,TEST_BUSY ); + igt_subtest_f("busy-idle-check-all-%s", e->name) +busy_check_all (fd, e, num_engines, +TEST_BUSY |TEST_TRAILING_IDLE ); + +/** +* Test that when all except one engine are loaded all +* loads are correctly reported. +*/ + igt_subtest_f("most-busy-check-all-%s", e->name) +most_busy_check_all (fd, e, num_engines, +TEST_BUSY ); + igt_subtest_f("most-busy-idle-check-all-%s", e->name) +most_busy_check_all (fd, e, num_engines, +TEST_BUSY | +TEST_TRAILING_IDLE ); - igt_subtest_f("busy-hang-%s", e->name) { -igt_hang_t hang =igt_allow_hang (fd,0 ,0 ); +/** +* Test that semphore counters report no activity on +* idle or busy engines. +*/ + igt_subtest_f("idle-no-semaphores-%s", e->name) +no_sema (fd, e,0 ); -single (fd, e,TEST_BUSY |FLAG_HANG ); + igt_subtest_f("busy-no-semaphores-%s", e->name) +no_sema (fd, e,TEST_BUSY ); -igt_disallow_hang (fd, hang); - } + igt_subtest_f("busy-idle-no-semaphores-%s", e->name) +no_sema (fd, e,TEST_BUSY |TEST_TRAILING_IDLE ); + +/** +* Test that semaphore waits are correctly reported. +*/ + igt_subtest_f("semaphore-wait-%s", e->name) +sema_wait (fd, e,TEST_BUSY ); + + igt_subtest_f("semaphore-wait-idle-%s", e->name) +sema_wait (fd, e, +TEST_BUSY |TEST_TRAILING_IDLE ); + +/** +* Check that two perf clients do not influence each +* others observations. +*/ + igt_subtest_f("multi-client-%s", e->name) +multi_client (fd, e); + +/** +* Check that reported usage is correct when PMU is +* enabled after the batch is running. +*/ + igt_subtest_f("busy-start-%s", e->name) +busy_start (fd, e); + +/** +* Check that reported usage is correct when PMU is +* enabled after two batches are running. +*/ + igt_subtest_f("busy-double-start-%s", e->name) { +gem_require_contexts (fd); +busy_double_start (fd, e); + } + +/** +* Check that the PMU can be safely enabled in face of +* interrupt-heavy engine load. +*/ + igt_subtest_f("enable-race-%s", e->name) +test_enable_race (fd, e); + +/** +* Check engine busyness accuracy is as expected. +*/ +for (i =0 ; i <ARRAY_SIZE (pct); i++) { +igt_subtest_f ("busy-accuracy-%u-%s" , + pct[i], e->name) +accuracy (fd, e, pct[i],10 ); + } + + igt_subtest_f("busy-hang-%s", e->name) { +igt_hang_t hang =igt_allow_hang (fd,0 ,0 ); + +single (fd, e,TEST_BUSY |FLAG_HANG ); + +igt_disallow_hang (fd, hang); }/**
@@ -1901,19 +1895,12 @@ igt_main }__for_each_physical_engine (render_fd, e) { - igt_subtest_group { - igt_fixture { -gem_context_has_engine (render_fd, -0 , e->flags); - } - - igt_subtest_f("render-node-busy-%s", e->name) -single (render_fd, e,TEST_BUSY ); -igt_subtest_f ("render-node-busy-idle-%s" , - e->name) -single (render_fd, e, -TEST_BUSY |TEST_TRAILING_IDLE ); - } + igt_subtest_f("render-node-busy-%s", e->name) +single (render_fd, e,TEST_BUSY ); +igt_subtest_f ("render-node-busy-idle-%s" , + e->name) +single (render_fd, e, +TEST_BUSY |TEST_TRAILING_IDLE ); } igt_fixture {
Signature · 6 lines
2.19.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for perf_pmu: Remove redundant check for engine
== Series Details ==
== Series Details ==
Series: perf_pmu: Remove redundant check for engine
URL : https://patchwork.freedesktop.org/series/61653/
State : success
== Summary ==
CI Bug Log - changes from IGT_5040 -> IGTPW_3119
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/61653/revisions/1/mbox/
Known issues
------------
Here are the changes found in IGTPW_3119 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_pm_rpm@basic-rte:
- fi-icl-u3: [PASS][1] -> [DMESG-WARN][2] ([fdo#107724]) +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/fi-icl-u3/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/fi-icl-u3/igt@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank:
- fi-elk-e7500: [PASS][3] -> [FAIL][4] ([fdo#100368])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/fi-elk-e7500/igt@kms_flip@basic-flip-vs-wf_vblank.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/fi-elk-e7500/igt@kms_flip@basic-flip-vs-wf_vblank.html
#### Possible fixes ####
* igt@gem_exec_reloc@basic-softpin:
- fi-icl-u3: [DMESG-WARN][5] ([fdo#107724]) -> [PASS][6] +2 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/fi-icl-u3/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/fi-icl-u3/igt@[email protected]
* igt@gem_mmap_gtt@basic-small-bo-tiledy:
- fi-elk-e7500: [FAIL][7] -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/fi-elk-e7500/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/fi-elk-e7500/igt@[email protected]
[fdo#100368]: https://bugs.freedesktop.org/show_bug.cgi?id=100368
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
Participating hosts (52 -> 46)
------------------------------
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus
Build changes
-------------
* IGT: IGT_5040 -> IGTPW_3119
CI_DRM_6195: 06b71939f2477c76f9eecb1dd5e99dcb25cb8371 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_3119: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/
IGT_5040: f190ab5dcd3fa52f4b47bc28c01bcfbbdc888826 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Hi Petri,
Quoted 9 lines · Petri Latvala
__for_each_physical_enginealready iterates over only engines that exist, we don't need to check again that they exist.Removing the check also makes their respective
subtest_groupsnot needed.Signed-off-by Petri Latvala <[email protected]>Cc Tvrtko Ursulin <[email protected]>Cc Andi Shyti <[email protected]>
looks good,
Thanks,
Andi
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for perf_pmu: Remove redundant check for engine
In reply to Petri Latvala== Series Details ==
== Series Details ==
Series: perf_pmu: Remove redundant check for engine
URL : https://patchwork.freedesktop.org/series/61653/
State : success
== Summary ==
CI Bug Log - changes from IGT_5040_full -> IGTPW_3119_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/61653/revisions/1/mbox/
Known issues
------------
Here are the changes found in IGTPW_3119_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_eio@in-flight-suspend:
- shard-apl: [PASS][1] -> [DMESG-WARN][2] ([fdo#108566]) +3 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-apl3/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-apl3/igt@[email protected]
* igt@i915_suspend@debugfs-reader:
- shard-iclb: [PASS][3] -> [INCOMPLETE][4] ([fdo#107713])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb3/igt@[email protected]
* igt@kms_busy@basic-modeset-c:
- shard-hsw: [PASS][5] -> [INCOMPLETE][6] ([fdo#103540])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-hsw1/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-hsw8/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-256x85-random:
- shard-kbl: [PASS][7] -> [FAIL][8] ([fdo#103232])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-kbl7/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-kbl4/igt@[email protected]
- shard-apl: [PASS][9] -> [FAIL][10] ([fdo#103232])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-apl6/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-apl3/igt@[email protected]
* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: [PASS][11] -> [SKIP][12] ([fdo#109349])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb2/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb1/igt@[email protected]
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-hsw: [PASS][13] -> [SKIP][14] ([fdo#109271]) +29 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-hsw6/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-hsw1/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-tilingchange:
- shard-apl: [PASS][15] -> [FAIL][16] ([fdo#103167])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-apl4/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-apl4/igt@[email protected]
- shard-kbl: [PASS][17] -> [FAIL][18] ([fdo#103167])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-kbl4/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-kbl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-render:
- shard-iclb: [PASS][19] -> [FAIL][20] ([fdo#103167]) +5 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb6/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-render.html
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb2/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-render.html
* igt@kms_plane_scaling@pipe-c-scaler-with-rotation:
- shard-iclb: [PASS][21] -> [INCOMPLETE][22] ([fdo#107713] / [fdo#110041])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb1/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb7/igt@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][23] -> [SKIP][24] ([fdo#109441]) +2 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb4/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_sysfs_edid_timing:
- shard-hsw: [PASS][25] -> [FAIL][26] ([fdo#100047])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-hsw8/igt@kms_sysfs_edid_timing.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-hsw1/igt@kms_sysfs_edid_timing.html
- shard-iclb: [PASS][27] -> [FAIL][28] ([fdo#100047])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb7/igt@kms_sysfs_edid_timing.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb2/igt@kms_sysfs_edid_timing.html
#### Possible fixes ####
* {igt@gem_exec_balancer@bonded-cork}:
- shard-iclb: [FAIL][29] -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb1/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb6/igt@[email protected]
* igt@gem_mmap_gtt@forked-big-copy:
- shard-iclb: [INCOMPLETE][31] ([fdo#107713] / [fdo#109100]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb4/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb7/igt@[email protected]
* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: [INCOMPLETE][33] ([fdo#103540]) -> [PASS][34] +1 similar issue
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-hsw6/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-hsw8/igt@[email protected]
* igt@i915_suspend@debugfs-reader:
- shard-apl: [DMESG-WARN][35] ([fdo#108566]) -> [PASS][36] +4 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-apl1/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-apl7/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-256x256-random:
- shard-snb: [SKIP][37] ([fdo#109271]) -> [PASS][38] +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-snb5/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-snb5/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-256x256-random:
- shard-kbl: [FAIL][39] ([fdo#103232]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-kbl1/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-kbl2/igt@[email protected]
- shard-apl: [FAIL][41] ([fdo#103232]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-apl5/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-apl2/igt@[email protected]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-atomic:
- shard-glk: [FAIL][43] ([fdo#104873]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-glk9/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-glk7/igt@[email protected]
* igt@kms_cursor_legacy@cursorb-vs-flipb-atomic:
- shard-hsw: [SKIP][45] ([fdo#109271]) -> [PASS][46] +34 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-hsw1/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-hsw6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-pgflip-blt:
- shard-glk: [FAIL][47] ([fdo#103167]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-glk9/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-glk4/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-render:
- shard-iclb: [FAIL][49] ([fdo#103167]) -> [PASS][50] +1 similar issue
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb2/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-render.html
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-render.html
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
- shard-kbl: [INCOMPLETE][51] ([fdo#103665]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-kbl3/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-kbl7/igt@[email protected]
* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][53] ([fdo#109441]) -> [PASS][54] +2 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb7/igt@kms_psr@psr2_cursor_render.html
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][55] ([fdo#99912]) -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-apl5/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-apl5/igt@[email protected]
* igt@perf@oa-exponents:
- shard-glk: [FAIL][57] ([fdo#105483]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-glk8/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-glk2/igt@[email protected]
* igt@perf_pmu@rc6-runtime-pm:
- shard-glk: [FAIL][59] ([fdo#105010]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-glk8/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-glk2/igt@[email protected]
- shard-hsw: [FAIL][61] ([fdo#105010]) -> [PASS][62]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-hsw6/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-hsw7/igt@[email protected]
#### Warnings ####
* igt@gem_tiled_swapping@non-threaded:
- shard-iclb: [INCOMPLETE][63] ([fdo#107713] / [fdo#108686]) -> [FAIL][64] ([fdo#108686])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5040/shard-iclb7/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/shard-iclb2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#100047]: https://bugs.freedesktop.org/show_bug.cgi?id=100047
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#104873]: https://bugs.freedesktop.org/show_bug.cgi?id=104873
[fdo#105010]: https://bugs.freedesktop.org/show_bug.cgi?id=105010
[fdo#105483]: https://bugs.freedesktop.org/show_bug.cgi?id=105483
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110041]: https://bugs.freedesktop.org/show_bug.cgi?id=110041
[fdo#110836]: https://bugs.freedesktop.org/show_bug.cgi?id=110836
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (7 -> 6)
------------------------------
Missing (1): shard-skl
Build changes
-------------
* IGT: IGT_5040 -> IGTPW_3119
CI_DRM_6195: 06b71939f2477c76f9eecb1dd5e99dcb25cb8371 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_3119: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/
IGT_5040: f190ab5dcd3fa52f4b47bc28c01bcfbbdc888826 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_3119/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev