board/friendlyarm: Add support for friendlyarm nanopi neo4 board
PATCH 1/3 board/friendlyarm: Add support for friendlyarm nanopi neo4 board
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++ board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++ board/friendlyarm/nanopi-neo4/post-build.sh | 9 +++++ board/friendlyarm/nanopi-neo4/readme.txt | 53 +++++++++++++++++++++++++++ configs/nanopi_neo4_defconfig | 55 +++++++++++++++++++++++++++++ 7 files changed, 146 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt create mode 100644 configs/nanopi_neo4_defconfig
.gitlab-ci.yml +1 -0
@@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } nanopi_m4_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } +nanopi_neo4_defconfig: { extends: .defconfig } nexbox_a95x_defconfig: { extends: .defconfig } nitrogen6sx_defconfig: { extends: .defconfig } nitrogen6x_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2044,10 +2044,12 @@ F: package/wolfssl/ N: Shyam Saini <[email protected]> F: board/friendlyarm/nanopc-t4/ F: board/friendlyarm/nanopi-m4/ +F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig +F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig
board/friendlyarm/nanopi-neo4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label NanoPi Neo4 linux + kernel /boot/Image + devicetree /boot/rk3399-nanopi-neo4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
board/friendlyarm/nanopi-neo4/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/friendlyarm/nanopi-neo4/post-build.sh new file +9 -0
@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/friendlyarm/nanopi-neo4/readme.txt new file +53 -0
53 lines not on this page · raw message
configs/nanopi_neo4_defconfig new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 2/3 board/radxa: Add support for Radxa Rock Pi4 board
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rock-pi4/extlinux.conf | 4 +++ board/radxa/rock-pi4/genimage.cfg | 22 +++++++++++++++ board/radxa/rock-pi4/post-build.sh | 9 +++++++ board/radxa/rock-pi4/readme.txt | 51 +++++++++++++++++++++++++++++++++++ configs/radxa_rock_pi4_defconfig | 55 ++++++++++++++++++++++++++++++++++++++ 7 files changed, 144 insertions(+) create mode 100644 board/radxa/rock-pi4/extlinux.conf create mode 100644 board/radxa/rock-pi4/genimage.cfg create mode 100755 board/radxa/rock-pi4/post-build.sh create mode 100644 board/radxa/rock-pi4/readme.txt create mode 100644 configs/radxa_rock_pi4_defconfig
.gitlab-ci.yml +1 -0
@@ -250,6 +250,7 @@ qemu_x86_64_defconfig: { extends: .defconfig } qemu_x86_defconfig: { extends: .defconfig } qemu_xtensa_lx60_defconfig: { extends: .defconfig } qemu_xtensa_lx60_nommu_defconfig: { extends: .defconfig } +radxa_rock_pi4_defconfig: { extends: .defconfig } raspberrypi0_defconfig: { extends: .defconfig } raspberrypi0w_defconfig: { extends: .defconfig } raspberrypi2_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2047,11 +2047,13 @@ F: board/friendlyarm/nanopi-m4/ F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ +F: board/radxa/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig +F: configs/radxa_rock_pi4_defconfig N: Simon Dawson <[email protected]> F: boot/at91bootstrap3/
board/radxa/rock-pi4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label Radxa Rock pi4 linux + kernel /boot/Image + devicetree /boot/rk3399-rock-pi-4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
board/radxa/rock-pi4/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/radxa/rock-pi4/post-build.sh new file +9 -0
@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/radxa/rock-pi4/readme.txt new file +51 -0
51 lines not on this page · raw message
configs/radxa_rock_pi4_defconfig new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 3/3 board/pine64: Add support for Pine64 RockPro64 board
In reply to Shyam SainiThis initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/pine64/rockpro64/extlinux.conf | 4 +++ board/pine64/rockpro64/genimage.cfg | 22 +++++++++++++++ board/pine64/rockpro64/post-build.sh | 9 ++++++ board/pine64/rockpro64/readme.txt | 51 +++++++++++++++++++++++++++++++++ configs/pine64_rockpro64_defconfig | 55 ++++++++++++++++++++++++++++++++++++ 7 files changed, 144 insertions(+) create mode 100644 board/pine64/rockpro64/extlinux.conf create mode 100644 board/pine64/rockpro64/genimage.cfg create mode 100755 board/pine64/rockpro64/post-build.sh create mode 100644 board/pine64/rockpro64/readme.txt create mode 100644 configs/pine64_rockpro64_defconfig
.gitlab-ci.yml +1 -0
@@ -215,6 +215,7 @@ pandaboard_defconfig: { extends: .defconfig } pc_x86_64_bios_defconfig: { extends: .defconfig } pc_x86_64_efi_defconfig: { extends: .defconfig } pine64_defconfig: { extends: .defconfig } +pine64_rockpro64_defconfig: { extends: .defconfig } pine64_sopine_defconfig: { extends: .defconfig } qemu_aarch64_virt_defconfig: { extends: .defconfig } qemu_arm_versatile_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2047,12 +2047,14 @@ F: board/friendlyarm/nanopi-m4/ F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ +F: board/pine64/rockpro64 F: board/radxa/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig +F: configs/pine64_rockpro64_defconfig F: configs/radxa_rock_pi4_defconfig N: Simon Dawson <[email protected]>
board/pine64/rockpro64/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RockPro64 linux + kernel /boot/Image + devicetree /boot/rk3399-rockpro64.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
board/pine64/rockpro64/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/pine64/rockpro64/post-build.sh new file +9 -0
@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/pine64/rockpro64/readme.txt new file +51 -0
51 lines not on this page · raw message
configs/pine64_rockpro64_defconfig new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 3/3 board/pine64: Add support for Pine64 RockPro64 board
My sincere apologies, these patches were intended for buildroot mailing list My reverse search did some mistake.
Quoted 228 lines · Shyam Saini
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packagesSigned-off-by Shyam Saini <[email protected]>--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/pine64/rockpro64/extlinux.conf | 4 +++ board/pine64/rockpro64/genimage.cfg | 22 +++++++++++++++ board/pine64/rockpro64/post-build.sh | 9 ++++++ board/pine64/rockpro64/readme.txt | 51 +++++++++++++++++++++++++++++++++ configs/pine64_rockpro64_defconfig | 55 ++++++++++++++++++++++++++++++++++++ 7 files changed, 144 insertions(+) create mode 100644 board/pine64/rockpro64/extlinux.conf create mode 100644 board/pine64/rockpro64/genimage.cfg create mode 100755 board/pine64/rockpro64/post-build.sh create mode 100644 board/pine64/rockpro64/readme.txt create mode 100644 configs/pine64_rockpro64_defconfig.gitlab-ci.yml +1
-0@@ -215,6 +215,7 @@ pandaboard_defconfig: { extends: .defconfig } pc_x86_64_bios_defconfig: { extends: .defconfig } pc_x86_64_efi_defconfig: { extends: .defconfig } pine64_defconfig: { extends: .defconfig } +pine64_rockpro64_defconfig: { extends: .defconfig } pine64_sopine_defconfig: { extends: .defconfig } qemu_aarch64_virt_defconfig: { extends: .defconfig } qemu_arm_versatile_defconfig: { extends: .defconfig }DEVELOPERS +2
-0@@ -2047,12 +2047,14 @@ F: board/friendlyarm/nanopi-m4/ F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ +F: board/pine64/rockpro64 F: board/radxa/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig +F: configs/pine64_rockpro64_defconfig F: configs/radxa_rock_pi4_defconfig N: Simon Dawson <[email protected]>board/pine64/rockpro64/extlinux.conf new file +4
-0@@ -0,0 +1,4 @@ +label RockPro64 linux + kernel /boot/Image + devicetree /boot/rk3399-rockpro64.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwaitboard/pine64/rockpro64/genimage.cfg new file +22
-0@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}board/pine64/rockpro64/post-build.sh new file +9
-0@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.confboard/pine64/rockpro64/readme.txt new file +51
-0@@ -0,0 +1,51 @@ +Intro +===== + +Pine64 RockPro64 is a RK3399 SoC based ARM64 board. + +Wiki: https://wiki.pine64.org/index.php/ROCKPro64_Main_Page + +Build +===== + +Run Pine64 RockPro64 configuration + + $ make pine64_rockpro64_defconfig + +To build, run make comamnd. + + $ make + +Files created in output directory +================================= + +output/images + +├── bl31.bin +├── bl31.elf +├── Image +├── rk3399-rockpro64.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +├── u-boot.itb +├── u-boot-spl-dtb.bin +├── u-boot-tpl-dtb.bin +├── u-boot-tpl-dtb.img +└── u-boot-tpl-spl-dtb.img + +Creating bootable SD card: +========================= + +Simply invoke (as root) + + # dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device + +Serial console +-------------- + +Baudrate for this board is 1500000configs/pine64_rockpro64_defconfig new file +55
-1@@ -0,0 +1,55 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.1 series +BR2_KERNEL_HEADERS_5_1=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="RockPro 64" +BR2_TARGET_GENERIC_ISSUE="Welcome to RockPro64!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="512M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh" --2.11.0
PATCH 1/3 board/friendlyarm: Add support for friendlyarm nanopi neo4 board
In reply to Shyam SainiQuoted 27 lines · Shyam Saini
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packagesSigned-off-by Shyam Saini <[email protected]>--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++ board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++ board/friendlyarm/nanopi-neo4/post-build.sh | 9 +++++ board/friendlyarm/nanopi-neo4/readme.txt | 53 +++++++++++++++++++++++++++ configs/nanopi_neo4_defconfig | 55 +++++++++++++++++++++++++++++ 7 files changed, 146 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt create mode 100644 configs/nanopi_neo4_defconfig.gitlab-ci.yml +0
-0
.gitlab-ci.yml nanopi_m1_defconfig: { extends: .defconfig } · line 187
Quoted 7 lines
.gitlab-ci.yml +1
-0@@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } nanopi_m4_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } +nanopi_neo4_defconfig: { extends: .defconfig } nexbox_a95x_defconfig: { extends: .defconfig } nitrogen6sx_defconfig: { extends: .defconfig } nitrogen6x_defconfig: { extends: .defconfig }
We don't have gitlab-ci setup in mainline, so this won't apply as-is. I would however very much like to see what you have as I'd posted elsewhere my gitlab-ci file that converts what we do in travis to gitlab. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190605/2ea71be0/attachment.sig>
PATCH 1/3 board/friendlyarm: Add support for friendlyarm nanopi neo4 board
Hi Tom,
Quoted 31 lines
Quoted 31 lines
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packagesSigned-off-by Shyam Saini <[email protected]>--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++ board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++ board/friendlyarm/nanopi-neo4/post-build.sh | 9 +++++ board/friendlyarm/nanopi-neo4/readme.txt | 53 +++++++++++++++++++++++++++ configs/nanopi_neo4_defconfig | 55 +++++++++++++++++++++++++++++ 7 files changed, 146 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt create mode 100644 configs/nanopi_neo4_defconfig.gitlab-ci.yml +1
-0@@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } nanopi_m4_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } +nanopi_neo4_defconfig: { extends: .defconfig }
Quoted 8 lines
.gitlab-ci.yml nanopi_m1_defconfig: { extends: .defconfig } · line 187
Quoted 3 lines
.gitlab-ci.yml +0
-0nexbox_a95x_defconfig: { extends: .defconfig } nitrogen6sx_defconfig: { extends: .defconfig } nitrogen6x_defconfig: { extends: .defconfig }We don't have gitlab-ci setup in mainline, so this won't apply as-is. I would however very much like to see what you have as I'd posted elsewhere my gitlab-ci file that converts what we do in travis to gitlab. Thanks!
These are the buildroot patches which I accidentally sent to u-boot mailing list.
Sorry for the confusion and noise.
Thanks!!