board: am335x/mux: configure the pins for 8-bit data transfer on MMC1
PATCH 1/1 board: am335x/mux: configure the pins for 8-bit data transfer on MMC1
This is required for proper operation of the 8-bit data transfers. This fixes transient errors seen on BeagleBone Black.
Signed-off-by Jean-Jacques Hiblot <[email protected]>
--- board/ti/am335x/mux.c | 4 ++++ 1 file changed, 4 insertions(+)
board/ti/am335x/mux.c +4 -0
@@ -93,6 +93,10 @@ static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { };static struct module_pin_mux mmc1_pin_mux[] = { + {OFFSET (gpmc_ad7), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT7 */ + {OFFSET (gpmc_ad6), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT6 */ + {OFFSET (gpmc_ad5), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT5 */ + {OFFSET (gpmc_ad4), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT4 */ {OFFSET (gpmc_ad3), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT3 */ {OFFSET (gpmc_ad2), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT2 */ {OFFSET (gpmc_ad1), (MODE (1 ) |RXACTIVE |PULLUP_EN )},/* MMC1_DAT1 */
Signature · 1 line
2.17.1
PATCH 1/1 board: am335x/mux: configure the pins for 8-bit data transfer on MMC1
Quoted 4 lines · Jean-Jacques Hiblot
This is required for proper operation of the 8-bit data transfers. This fixes transient errors seen on BeagleBone Black.
Signed-off-by Jean-Jacques Hiblot <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190605/d53257cb/attachment.sig>