davinci: remove leftover low-level routines
Subsystems (4)
v2 cover davinci: remove leftover low-level routines
From: Bartosz Golaszewski <[email protected]>
I'm resending my earlier patch together with David's commit that makes this series not break the build for LEGO EV3.
Bartosz Golaszewski (1):
arm: davinci: remove leftover assembly
David Lechner (1):
configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT
arch/arm/mach-davinci/Makefile | 4 - arch/arm/mach-davinci/lowlevel_init.S | 692 -------------------------- include/configs/legoev3.h | 1 + 3 files changed, 1 insertion(+), 696 deletions(-) delete mode 100644 arch/arm/mach-davinci/lowlevel_init.S
Signature · 1 line
2.21.0
PATCH v2 1/2 configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT
From: David Lechner <[email protected]>
This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config. On the EV3, U-Boot is loaded into RAM by another bootloader, so we don't need the lowlevel init in U-Boot.
--- include/configs/legoev3.h | 1 + 1 file changed, 1 insertion(+)
include/configs/legoev3.h +1 -0
@@ -22,6 +22,7 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SKIP_LOWLEVEL_INIT /* * Memory Info
Signature · 1 line
2.21.0
PATCH v2 1/2 configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT
Quoted 8 lines · Bartosz Golaszewski
From: David Lechner <[email protected]>
This adds a define for
CONFIG_SKIP_LOWLEVEL_INITin the legoev3 config. On the EV3, U-Boot is loaded into RAM by another bootloader, so we don't need the lowlevel init in U-Boot.Signed-off-by David Lechner <[email protected]>Signed-off-by Bartosz Golaszewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190605/29ffd5a6/attachment.sig>
PATCH v2 2/2 arm: davinci: remove leftover assembly
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
There are no more users of lowlevel_init.S. Remove the file.
--- arch/arm/mach-davinci/Makefile | 4 - arch/arm/mach-davinci/lowlevel_init.S | 692 -------------------------- 2 files changed, 696 deletions(-) delete mode 100644 arch/arm/mach-davinci/lowlevel_init.S
arch/arm/mach-davinci/Makefile +0 -4
@@ -18,7 +18,3 @@ obj-$(CONFIG_SPL_FRAMEWORK) += spl.o obj-$(CONFIG_SOC_DM365) += dm365_lowlevel.o obj-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o endif - -ifndef CONFIG_SKIP_LOWLEVEL_INIT -obj-y += lowlevel_init.o -endif
arch/arm/mach-davinci/lowlevel_init.S deleted +0 -692
692 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH v2 2/2 arm: davinci: remove leftover assembly
Quoted 6 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
There are no more users of
lowlevel_init.S. Remove the file.Suggested-by Adam Ford <[email protected]>Signed-off-by Bartosz Golaszewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190605/65a4a76f/attachment.sig>