fix warnings for same module names
Subsystems (4)
cover fix warnings for same module names
Hi,
This patch set addresses warnings that module names are named the same, this may lead to a problem that wrong module gets loaded or if one of the two same-name modules exports a symbol, this can confuse the dependency resolution. and the build may fail.
Patch "drivers: net: dsa: realtek: fix warning same module names" and "drivers: net: phy: realtek: fix warning same module names" resolves the name clatch realtek.ko.
warning: same module names found:
drivers/net/phy/realtek.ko
drivers/net/dsa/realtek.ko
Patch "drivers: (video|gpu): fix warning same module names" resolves the name clatch mxsfb.ko.
warning: same module names found:
drivers/video/fbdev/mxsfb.ko
drivers/gpu/drm/mxsfb/mxsfb.ko
Patch "drivers: media: i2c: fix warning same module names" resolves the name clatch adv7511.ko however, it seams to refer to the same device name in i2c_device_id, does anyone have any guidance how that should be solved?
warning: same module names found:
drivers/gpu/drm/bridge/adv7511/adv7511.ko
drivers/media/i2c/adv7511.ko
Patch "drivers: media: coda: fix warning same module names" resolves the name clatch coda.ko.
warning: same module names found:
fs/coda/coda.ko
drivers/media/platform/coda/coda.ko
Patch "drivers: net: phy: fix warning same module names" resolves the name clatch asix.ko.
warning: same module names found:
drivers/net/phy/asix.ko
drivers/net/usb/asix.ko
Patch "drivers: mfd: 88pm800: fix warning same module names" and "drivers: regulator: 88pm800: fix warning same module names" resolves the name clatch 88pm800.ko.
warning: same module names found:
drivers/regulator/88pm800.ko
drivers/mfd/88pm800.ko
Cheers,
Anders
Anders Roxell (8):
drivers: net: dsa: realtek: fix warning same module names
drivers: net: phy: realtek: fix warning same module names
drivers: (video|gpu): fix warning same module names
drivers: media: i2c: fix warning same module names
drivers: media: coda: fix warning same module names
drivers: net: phy: fix warning same module names
drivers: mfd: 88pm800: fix warning same module names
drivers: regulator: 88pm800: fix warning same module names
drivers/gpu/drm/bridge/adv7511/Makefile | 10 +++++----- drivers/gpu/drm/mxsfb/Makefile | 4 ++-- drivers/media/i2c/Makefile | 3 ++- drivers/media/platform/coda/Makefile | 4 ++-- drivers/mfd/Makefile | 7 +++++-- drivers/net/dsa/Makefile | 4 ++-- drivers/net/phy/Makefile | 6 ++++-- drivers/regulator/Makefile | 3 ++- drivers/video/fbdev/Makefile | 3 ++- 9 files changed, 26 insertions(+), 18 deletions(-)
Signature · 1 line
2.20.1
Mauro Carvalho Chehab
maintainerEm Thu, 6 Jun 2019 11:46:57 +0200
Anders Roxell <[email protected]> escreveu:
Quoted 34 lines
Hi,
This patch set addresses warnings that module names are named the same, this may lead to a problem that wrong module gets loaded or if one of the two same-name modules exports a symbol, this can confuse the dependency resolution. and the build may fail.
Patch "drivers: net: dsa: realtek: fix warning same module names" and "drivers: net: phy: realtek: fix warning same module names" resolves the name clatch realtek.ko.
warning: same module names found:
drivers/net/phy/realtek.ko
drivers/net/dsa/realtek.koPatch "drivers: (video|gpu): fix warning same module names" resolves the name clatch mxsfb.ko.
warning: same module names found:
drivers/video/fbdev/mxsfb.ko
drivers/gpu/drm/mxsfb/mxsfb.koPatch "drivers: media: i2c: fix warning same module names" resolves the name clatch adv7511.ko however, it seams to refer to the same device name in
i2c_device_id, does anyone have any guidance how that should be solved?warning: same module names found:
drivers/gpu/drm/bridge/adv7511/adv7511.ko
drivers/media/i2c/adv7511.ko
Quoted 6 lines
Patch "drivers: media: coda: fix warning same module names" resolves the name clatch coda.ko.
warning: same module names found:
fs/coda/coda.ko
drivers/media/platform/coda/coda.ko
Media change look ok, and probably the other patches too, but the problem here is: who will apply it and when.
The way you grouped the changes makes harder for subsystem maintainers to pick, as the same patch touches multiple subsystems.
On the other hand, if this gets picked by someone else, it has the potential to cause conflicts between linux-next and the maintainer's tree.
So, the best would be if you re-arrange this series to submit one patch per subsystem.
Quoted 31 lines
Patch "drivers: net: phy: fix warning same module names" resolves the name clatch asix.ko.
warning: same module names found:
drivers/net/phy/asix.ko
drivers/net/usb/asix.koPatch "drivers: mfd: 88pm800: fix warning same module names" and "drivers: regulator: 88pm800: fix warning same module names" resolves the name clatch 88pm800.ko.
warning: same module names found:
drivers/regulator/88pm800.ko
drivers/mfd/88pm800.koCheers,
AndersAnders Roxell (8):
drivers: net: dsa: realtek: fix warning same module names
drivers: net: phy: realtek: fix warning same module names
drivers: (video|gpu): fix warning same module names
drivers: media: i2c: fix warning same module names
drivers: media: coda: fix warning same module names
drivers: net: phy: fix warning same module names
drivers: mfd: 88pm800: fix warning same module names
drivers: regulator: 88pm800: fix warning same module names
Quoted 11 lines
drivers/gpu/drm/bridge/adv7511/Makefile | 10 +++++----- drivers/gpu/drm/mxsfb/Makefile | 4 ++-- drivers/media/i2c/Makefile | 3 ++- drivers/media/platform/coda/Makefile | 4 ++-- drivers/mfd/Makefile | 7 +++++-- drivers/net/dsa/Makefile | 4 ++-- drivers/net/phy/Makefile | 6 ++++-- drivers/regulator/Makefile | 3 ++- drivers/video/fbdev/Makefile | 3 ++- 9 files changed, 26 insertions(+), 18 deletions(-)
Thanks,
Mauro
Quoted 51 lines · Mauro Carvalho Chehab
Em Thu, 6 Jun 2019 11:46:57 +0200
Anders Roxell <[email protected]> escreveu:Quoted 34 lines
Hi,
This patch set addresses warnings that module names are named the same, this may lead to a problem that wrong module gets loaded or if one of the two same-name modules exports a symbol, this can confuse the dependency resolution. and the build may fail.
Patch "drivers: net: dsa: realtek: fix warning same module names" and "drivers: net: phy: realtek: fix warning same module names" resolves the name clatch realtek.ko.
warning: same module names found:
drivers/net/phy/realtek.ko
drivers/net/dsa/realtek.koPatch "drivers: (video|gpu): fix warning same module names" resolves the name clatch mxsfb.ko.
warning: same module names found:
drivers/video/fbdev/mxsfb.ko
drivers/gpu/drm/mxsfb/mxsfb.koPatch "drivers: media: i2c: fix warning same module names" resolves the name clatch adv7511.ko however, it seams to refer to the same device name in
i2c_device_id, does anyone have any guidance how that should be solved?warning: same module names found:
drivers/gpu/drm/bridge/adv7511/adv7511.ko
drivers/media/i2c/adv7511.koQuoted 6 lines
Patch "drivers: media: coda: fix warning same module names" resolves the name clatch coda.ko.
warning: same module names found:
fs/coda/coda.ko
drivers/media/platform/coda/coda.koMedia change look ok, and probably the other patches too, but the problem here is: who will apply it and when.
The way you grouped the changes makes harder for subsystem maintainers to pick, as the same patch touches multiple subsystems.
Quoted 6 lines
On the other hand, if this gets picked by someone else, it has the potential to cause conflicts between linux-next and the maintainer's tree.
So, the best would be if you re-arrange this series to submit one patch per subsystem.
I will send it per subsystem.
Cheers,
Anders
Quoted 49 lines
Quoted 33 lines
Patch "drivers: net: phy: fix warning same module names" resolves the name clatch asix.ko.
warning: same module names found:
drivers/net/phy/asix.ko
drivers/net/usb/asix.koPatch "drivers: mfd: 88pm800: fix warning same module names" and "drivers: regulator: 88pm800: fix warning same module names" resolves the name clatch 88pm800.ko.
warning: same module names found:
drivers/regulator/88pm800.ko
drivers/mfd/88pm800.koCheers,
AndersAnders Roxell (8):
drivers: net: dsa: realtek: fix warning same module names
drivers: net: phy: realtek: fix warning same module names
drivers: (video|gpu): fix warning same module names
drivers: media: i2c: fix warning same module names
drivers: media: coda: fix warning same module names
drivers: net: phy: fix warning same module names
drivers: mfd: 88pm800: fix warning same module names
drivers: regulator: 88pm800: fix warning same module namesQuoted 11 lines
drivers/gpu/drm/bridge/adv7511/Makefile | 10 +++++----- drivers/gpu/drm/mxsfb/Makefile | 4 ++-- drivers/media/i2c/Makefile | 3 ++- drivers/media/platform/coda/Makefile | 4 ++-- drivers/mfd/Makefile | 7 +++++-- drivers/net/dsa/Makefile | 4 ++-- drivers/net/phy/Makefile | 6 ++++-- drivers/regulator/Makefile | 3 ++- drivers/video/fbdev/Makefile | 3 ++- 9 files changed, 26 insertions(+), 18 deletions(-)Thanks,
Mauro