Skip to contentSkip to conversation

doc: update NIC support guide for bnxt and release notes

PATCH In review Lance Richardson 2 participants 2 messages Jun 7, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 doc: update NIC support guide for bnxt and release notes

From: Ajit Khaparde <[email protected]>

Add support for the Broadcom NetXtreme-E (BCM57500) family of controllers (aka Thor). The BCM57500 device is a 200G Ethernet controller with 50G PAM-4 and PCIe 4.0

---
 doc/guides/nics/bnxt.rst               | 6 +++---
 doc/guides/rel_notes/release_19_08.rst | 6 ++++++
 2 files changed, 9 insertions(+), 3 deletions(-)
doc/guides/nics/bnxt.rst +3 -3
index 697b97e60..d88e02116 100644
@@ -7,10 +7,10 @@ BNXT Poll Mode Driver
 The bnxt poll mode library (**librte_pmd_bnxt**) implements support for:
 
   * **Broadcom NetXtreme-C®/NetXtreme-E®/NetXtreme-S®
-    BCM5730X / BCM574XX / BCM58000 family of Ethernet Network Controllers**
+    BCM5730X / BCM574XX / BCM58000 / BCM575XX family of Ethernet Network Controllers**
 
-    These adapters support Standards compliant 10/25/50/100Gbps 30MPPS
-    full-duplex throughput.
+    Adapters based on this family of controllers support standards-compliant Ethernet
+    operation with link speeds of 10/25/50/100/200Gbps.
 
     Information about the NetXtreme family of adapters can be found in the
     `NetXtreme® Brand section
doc/guides/rel_notes/release_19_08.rst +6 -0
index 8fcd4a747..575c590d9 100644
@@ -61,6 +61,12 @@ New Features
   * Added support for SSE vector mode
   * Updated HWRM API to version 1.10.0.74
 
+* **Added support for Broadcom NetXtreme-E BCM57500 Ethernet controllers.**
+
+  Added support to the bnxt PMD for the BCM57500 (a.k.a. "Thor") family
+  of Ethernet controllers. These controllers support link speeds up to
+  200Gbps, 50G PAM-4, and PCIe 4.0.
+
 * **Added memif PMD.**
 
   Added the new Shared Memory Packet Interface (``memif``) PMD.
Signature · 1 line
2.17.1