Skip to contentSkip to conversation

mISDN: make sure device name is NUL terminated

PATCH New Sasha Levin 1 participant 13 messages Jun 8, 2019

Subsystems (6)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/13 mISDN: make sure device name is NUL terminated

From: Dan Carpenter <[email protected]>

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we need to ensure that the user's name is NUL terminated. Otherwise it could result in a buffer overflow when we copy the name back to the user with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy(). Hopefully, there aren't any other ways to create a too long name, but it's nice to do this as a kernel hardening measure.

---
 drivers/isdn/mISDN/socket.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/isdn/mISDN/socket.c +3 -2
index 0d29b5a6356d..8cbb75d09a1d 100644
@@ -394,7 +394,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -678,7 +678,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -692,6 +692,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			err = -EFAULT;
 			break;
 		}
+		dn.name[sizeof(dn.name) - 1] = '\0';
 		dev = get_mdevice(dn.id);
 		if (dev)
 			err = device_rename(&dev->dev, dn.name);
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/13 x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor

From: Frank van der Linden <[email protected]>

[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set, because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good reasons. For example, KVM currently does not emulate setting the CPB bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU when running under a hypervisor.

Cc Andy Lutomirski <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Fixes 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
[ Minor edits to the changelog. ]
---
 arch/x86/kernel/cpu/amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
arch/x86/kernel/cpu/amd.c +5 -2
index e94e6f16172b..6f2483292de0 100644
@@ -717,8 +717,11 @@ static void init_amd_zn(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_ZEN);
 
-	/* Fix erratum 1076: CPB feature bit not being set in CPUID. */
-	if (!cpu_has(c, X86_FEATURE_CPB))
+	/*
+	 * Fix erratum 1076: CPB feature bit not being set in CPUID.
+	 * Always set it, except when running under a hypervisor.
+	 */
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
 		set_cpu_cap(c, X86_FEATURE_CPB);
 }
 
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/13 perf/ring_buffer: Fix exposing a temporarily decreased data_head

In reply to Sasha Levin

From: Yabin Cui <[email protected]>

[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and write records to the same ring buffer:

	...
	local_dec_and_test(&rb->nest)
	...                          <-- an IRQ/NMI can happen here
	rb->user_page->data_head = head;
	...

In this case, a value A is written to data_head in the IRQ, then a value B is written to data_head after the IRQ. And A > B. As a result, data_head is temporarily decreased from A to B. And a reader may see data_head < data_tail if it read the buffer frequently enough, which creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head, which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]

Cc Alexander Shishkin <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Vince Weaver <[email protected]>
Fixes ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
---
 kernel/events/ring_buffer.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)
kernel/events/ring_buffer.c +20 -4
index 7324d83d6bd8..70e31c48ae9b 100644
@@ -52,11 +52,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	head = local_read(&rb->head);
 
 	/*
-	 * IRQ/NMI can happen here, which means we can miss a head update.
+	 * IRQ/NMI can happen here and advance @rb->head, causing our
+	 * load above to be stale.
 	 */
 
-	if (!local_dec_and_test(&rb->nest))
+	/*
+	 * If this isn't the outermost nesting, we don't have to update
+	 * @rb->user_page->data_head.
+	 */
+	if (local_read(&rb->nest) > 1) {
+		local_dec(&rb->nest);
 		goto out;
+	}
 
 	/*
 	 * Since the mmap() consumer (userspace) can run on a different CPU:
@@ -88,9 +95,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	rb->user_page->data_head = head;
 
 	/*
-	 * Now check if we missed an update -- rely on previous implied
-	 * compiler barriers to force a re-read.
+	 * We must publish the head before decrementing the nest count,
+	 * otherwise an IRQ/NMI can publish a more recent head value and our
+	 * write will (temporarily) publish a stale value.
+	 */
+	barrier();
+	local_set(&rb->nest, 0);
+
+	/*
+	 * Ensure we decrement @rb->nest before we validate the @rb->head.
+	 * Otherwise we cannot be sure we caught the 'last' nested update.
 	 */
+	barrier();
 	if (unlikely(head != local_read(&rb->head))) {
 		local_inc(&rb->nest);
 		goto again;
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/13 perf/ring_buffer: Add ordering to rb->nest increment

In reply to Sasha Levin

From: Peter Zijlstra <[email protected]>

[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]

Similar to how decrementing rb->next too early can cause data_head to (temporarily) be observed to go backward, so too can this happen when we increment too late.

This barrier() ensures the rb->head load happens after the increment, both the one in the 'goto again' path, as the one from perf_output_get_handle() -- albeit very unlikely to matter for the latter.

Cc Alexander Shishkin <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Vince Weaver <[email protected]>
Fixes ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
---
 kernel/events/ring_buffer.c | 9 +++++++++
 1 file changed, 9 insertions(+)
kernel/events/ring_buffer.c +9 -0
index 70e31c48ae9b..410f83cad06c 100644
@@ -49,6 +49,15 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	unsigned long head;
 
 again:
+	/*
+	 * In order to avoid publishing a head value that goes backwards,
+	 * we must ensure the load of @rb->head happens after we've
+	 * incremented @rb->nest.
+	 *
+	 * Otherwise we can observe a @rb->head value before one published
+	 * by an IRQ/NMI happening between the load and the increment.
+	 */
+	barrier();
 	head = local_read(&rb->head);
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/13 gpio: fix gpio-adp5588 build errors

In reply to Sasha Levin

From: Randy Dunlap <[email protected]>

[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]

The gpio-adp5588 driver uses interfaces that are provided by GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’

            dev->gpio_chip.irq.domain, gpio));
                          ^

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
gpiochip_set_nested_irqchip(&dev->gpio_chip,
^

---
 drivers/gpio/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/gpio/Kconfig +1 -0
index 469dc378adeb..aaae6040b4c8 100644
@@ -579,6 +579,7 @@ config GPIO_ADP5588
 config GPIO_ADP5588_IRQ
 	bool "Interrupt controller support for ADP5588"
 	depends on GPIO_ADP5588=y
+	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to enable the adp5588 to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/13 net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

In reply to Sasha Levin

From: Kees Cook <[email protected]>

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table' MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'

extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^

<scratch space>:90:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'

extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^

<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common use of MODULE_DEVICE_TABLE().

Fixes 07563c711fbc ("EISA bus MODALIAS attributes support")
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/ethernet/dec/tulip/de4x5.c +0 -1
index 3acde3b9b767..7799cf33cc6e 100644
@@ -2106,7 +2106,6 @@ static struct eisa_driver de4x5_eisa_driver = {
 		.remove  = de4x5_eisa_remove,
         }
 };
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 #endif
 
 #ifdef CONFIG_PCI
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/13 i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

In reply to Sasha Levin

From: Yingjoe Chen <[email protected]>

[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user will not be freed. Pump index up so it will be freed.

Fixes 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN")
---
 drivers/i2c/i2c-dev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/i2c/i2c-dev.c +1 -0
index 57e3790c87b1..e56b774e7cf9 100644
@@ -295,6 +295,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
 			    rdwr_pa[i].buf[0] < 1 ||
 			    rdwr_pa[i].len < rdwr_pa[i].buf[0] +
 					     I2C_SMBUS_BLOCK_MAX) {
+				i++;
 				res = -EINVAL;
 				break;
 			}
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/13 configfs: Fix use-after-free when accessing sd->s_dentry

In reply to Sasha Levin

From: Sahitya Tummala <[email protected]>

[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]

In the vfs_statx() context, during path lookup, the dentry gets added to sd->s_dentry via configfs_attach_attr(). In the end, vfs_statx() kills the dentry by calling path_put(), which invokes configfs_d_iput(). Ideally, this dentry must be removed from sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result, sd->s_dentry is holding reference to a stale dentry pointer whose memory is already freed up. This results in use-after-free issue, when this stale sd->s_dentry is accessed later in configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case - sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes 76ae281f6307 ('configfs: fix race between dentry put and lookup')
---
 fs/configfs/dir.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
fs/configfs/dir.c +6 -8
index a7a1b218f308..8e709b641b55 100644
@@ -58,15 +58,13 @@ static void configfs_d_iput(struct dentry * dentry,
 	if (sd) {
 		/* Coordinate with configfs_readdir */
 		spin_lock(&configfs_dirent_lock);
-		/* Coordinate with configfs_attach_attr where will increase
-		 * sd->s_count and update sd->s_dentry to new allocated one.
-		 * Only set sd->dentry to null when this dentry is the only
-		 * sd owner.
-		 * If not do so, configfs_d_iput may run just after
-		 * configfs_attach_attr and set sd->s_dentry to null
-		 * even it's still in use.
+		/*
+		 * Set sd->s_dentry to null only when this dentry is the one
+		 * that is going to be killed.  Otherwise configfs_d_iput may
+		 * run just after configfs_attach_attr and set sd->s_dentry to
+		 * NULL even it's still in use.
 		 */
-		if (atomic_read(&sd->s_count) <= 2)
+		if (sd->s_dentry == dentry)
 			sd->s_dentry = NULL;
 
 		spin_unlock(&configfs_dirent_lock);
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/13 ia64: fix build errors by exporting paddr_to_nid()

In reply to Sasha Levin

From: Randy Dunlap <[email protected]>

[ Upstream commit 9a626c4a6326da4433a0d4d4a8a7d1571caf1ed3 ]

Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by exporting paddr_to_nid().

Fixes these build errors:

ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined!
ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined!
ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined!
ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined!
ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined!

---
 arch/ia64/mm/numa.c | 1 +
 1 file changed, 1 insertion(+)
arch/ia64/mm/numa.c +1 -0
index aa19b7ac8222..476c7b4be378 100644
@@ -49,6 +49,7 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+EXPORT_SYMBOL(paddr_to_nid);
 
 #if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
 /*
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/13 KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

In reply to Sasha Levin

From: Paul Mackerras <[email protected]>

[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]

Currently the Book 3S KVM code uses kvm->lock to synchronize access to the kvm->arch.rtas_tokens list. Because this list is scanned inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held, taking kvm->lock cause a lock inversion problem, which could lead to a deadlock.

To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests inside the vcpu mutexes, and use that instead of kvm->lock when accessing the rtas token list.

This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free(). At this point we don't hold the new mutex, but that is OK because kvmppc_rtas_tokens_free() is only called when the whole VM is being destroyed, and at that point nothing can be looking up a token in the list.

---
 arch/powerpc/include/asm/kvm_host.h |  1 +
 arch/powerpc/kvm/book3s.c           |  1 +
 arch/powerpc/kvm/book3s_rtas.c      | 14 ++++++--------
 3 files changed, 8 insertions(+), 8 deletions(-)
arch/powerpc/include/asm/kvm_host.h +1 -0
index a92d95aee42d..1883627eb12c 100644
@@ -250,6 +250,7 @@ struct kvm_arch {
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct list_head spapr_tce_tables;
 	struct list_head rtas_tokens;
+	struct mutex rtas_token_lock;
 	DECLARE_BITMAP(enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
 #endif
 #ifdef CONFIG_KVM_MPIC
arch/powerpc/kvm/book3s.c +1 -0
index 099c79d8c160..4aab1c9c83e1 100644
@@ -809,6 +809,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 #ifdef CONFIG_PPC64
 	INIT_LIST_HEAD(&kvm->arch.spapr_tce_tables);
 	INIT_LIST_HEAD(&kvm->arch.rtas_tokens);
+	mutex_init(&kvm->arch.rtas_token_lock);
 #endif
 
 	return kvm->arch.kvm_ops->init_vm(kvm);
arch/powerpc/kvm/book3s_rtas.c +6 -8
index ef27fbd5d9c5..b1b2273d1f6d 100644
@@ -133,7 +133,7 @@ static int rtas_token_undefine(struct kvm *kvm, char *name)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		if (rtas_name_matches(d->handler->name, name)) {
@@ -154,7 +154,7 @@ static int rtas_token_define(struct kvm *kvm, char *name, u64 token)
 	bool found;
 	int i;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry(d, &kvm->arch.rtas_tokens, list) {
 		if (d->token = token)
@@ -193,14 +193,14 @@ int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp)
 	if (copy_from_user(&args, argp, sizeof(args)))
 		return -EFAULT;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.rtas_token_lock);
 
 	if (args.token)
 		rc = rtas_token_define(kvm, args.name, args.token);
 	else
 		rc = rtas_token_undefine(kvm, args.name);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.rtas_token_lock);
 
 	return rc;
 }
@@ -232,7 +232,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 	orig_rets = args.rets;
 	args.rets = &args.args[be32_to_cpu(args.nargs)];
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
 
 	rc = -ENOENT;
 	list_for_each_entry(d, &vcpu->kvm->arch.rtas_tokens, list) {
@@ -243,7 +243,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.rtas_token_lock);
 
 	if (rc = 0) {
 		args.rets = orig_rets;
@@ -269,8 +269,6 @@ void kvmppc_rtas_tokens_free(struct kvm *kvm)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
-
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		list_del(&d->list);
 		kfree(d);
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 11/13 net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

In reply to Sasha Levin

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop() so that mdio read access result is incorrect without any error according to kernel trace like below:

ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1 before operation the Ethernet MAC. However, the previous code was not set to 1 after the driver issued the soft_reset in sh_eth_dev_exit() so that the mdio read access result seemed incorrect. To fix the issue, this patch adds a condition and set the RMII mode register in sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling after phy_stop() on sh_eth_close(), but it gets worse (kernel panic happened and it seems that a register is accessed while the clock is off).

---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/renesas/sh_eth.c +4 -0
index afaf79b8761f..2d9f4ed9a65e 100644
@@ -1408,6 +1408,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
 	sh_eth_get_stats(ndev);
 	sh_eth_reset(ndev);
 
+	/* Set the RMII mode again if required */
+	if (mdp->cd->rmiimode)
+		sh_eth_write(ndev, 0x1, RMIIMODE);
+
 	/* Set MAC address again */
 	update_mac_address(ndev);
 }
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/13 scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

In reply to Sasha Levin

From: Varun Prakash <[email protected]>

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

---
 drivers/scsi/cxgbi/libcxgbi.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/scsi/cxgbi/libcxgbi.c +4 -0
index f3bb7af4e984..5eaf14c15590 100644
@@ -634,6 +634,10 @@ static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
 
 	if (ndev->flags & IFF_LOOPBACK) {
 		ndev = ip_dev_find(&init_net, daddr->sin_addr.s_addr);
+		if (!ndev) {
+			err = -ENETUNREACH;
+			goto rel_neigh;
+		}
 		mtu = ndev->mtu;
 		pr_info("rt dev %s, loopback -> %s, mtu %u.\n",
 			n->dev->name, ndev->name, mtu);
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/13 scsi: libsas: delete sas port if expander discover failed

In reply to Sasha Levin

From: Jason Yan <[email protected]>

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be deleted when the expander failed to discover. This will cause resource leak and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38
Fixes 2908d778ab3e ("[SCSI] aic94xx: new driver")
CC John Garry <[email protected]>
---
 drivers/scsi/libsas/sas_expander.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/libsas/sas_expander.c +2 -0
index 1a6f65db615e..978a01ab6979 100644
@@ -978,6 +978,8 @@ static struct domain_device *sas_ex_discover_expander(
 		list_del(&child->dev_list_node);
 		spin_unlock_irq(&parent->port->dev_list_lock);
 		sas_put_device(child);
+		sas_port_delete(phy->port);
+		phy->port = NULL;
 		return NULL;
 	}
 	list_add_tail(&child->siblings, &parent->ex_dev.children);
Signature · 1 line
2.20.1