Skip to contentSkip to conversation

configs/imx8mmpico: new defconfig

PATCH New Julien Olivain 2 participants 7 messages Jun 10, 2019 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

cover configs/imx8mmpico: new defconfig

This patch series add support for i.MX8M Mini SoC and a new defconfig for the Technexion i.MX8M Mini Pico board.

Julien Olivain (5):
package/freescale-imx: add option for i.MX8MM package/freescale-imx/firmware-imx: add support for i.MX8MM package/imx-mkimage: add support for i.MX8MM board/freescale/common/imx: add support for i.MX8MM configs/imx8mmpico: new defconfig

 .gitlab-ci.yml                                |  1 +
 DEVELOPERS                                    |  2 +
 .../common/imx/imx8-bootloader-prepare.sh     |  7 ++
 board/freescale/common/imx/post-image.sh      |  4 +
 board/technexion/imx8mmpico/readme.txt        | 96 +++++++++++++++++++
 configs/imx8mmpico_defconfig                  | 39 ++++++++
 package/freescale-imx/Config.in               |  6 +-
 .../firmware-imx/firmware-imx.mk              |  2 +-
 package/imx-mkimage/imx-mkimage.mk            |  2 +-
 9 files changed, 156 insertions(+), 3 deletions(-)
 create mode 100644 board/technexion/imx8mmpico/readme.txt
 create mode 100644 configs/imx8mmpico_defconfig
Signature · 1 line
2.21.0
#1 lore raw

PATCH 1/5 package/freescale-imx: add option for i.MX8MM

The i.MX8MMini is slightly different from the i.MX8M. The main difference of interrest here is that the i.MX8MMini has no HDMI support. The boot image must not include the HDMI signed firmware, which is why we need this new configuration option.

---
 package/freescale-imx/Config.in | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
package/freescale-imx/Config.in +5 -1
index fcceacdc9e..f010aab87b 100644
@@ -43,6 +43,9 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
 	bool "imx8m"
 
+config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
+	bool "imx8mm"
+
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 	bool "imx8x"
 endchoice
@@ -77,7 +80,8 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6S || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 || \
-		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
+		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M || \
+		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
 
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
Signature · 1 line
2.21.0
#2 lore raw

PATCH 1/5 package/freescale-imx: add option for i.MX8MM

Hi Julien,

Quoted 25 lines · Julien Olivain

The i.MX8MMini is slightly different from the i.MX8M. The main difference of interrest here is that the i.MX8MMini has no HDMI support. The boot image must not include the HDMI signed firmware, which is why we need this new configuration option.

---
 package/freescale-imx/Config.in | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
package/freescale-imx/Config.in +3 -0
index fcceacdc9e..f010aab87b 100644
@@ -43,6 +43,9 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
 	bool "imx8m"
 
+config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
+	bool "imx8mm"
+
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 	bool "imx8x"
 endchoice

package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 84

Quoted 6 lines
package/freescale-imx/Config.in +2 -1
@@ -77,7 +80,8 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6S || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 || \
-		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
+		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M || \
+		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM

Here, you set BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU, but you don't add a value
for BR2_PACKAGE_FREESCALE_IMX_PLATFORM, which will be used by the imx-lib package. Now, I don't think the imx-lib package is even relevant for imx8, but it *can* be built... Or maybe we should revisit the conditions on that package.

Also, in imx-gpu-viv/Config.in, for IMX8M, only the wayland output is enabled,
but now for IMX8MM, you allow all outputs. Is that intended?

Anyway, these things can be fixed up in follow-up patches, if needed, so I've
applied the entire series to master, thanks.

Regards,
Arnout

Quoted 4 lines
package/freescale-imx/Config.in +0 -0
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
 
#3 lore raw

PATCH 2/5 package/freescale-imx/firmware-imx: add support for i.MX8MM

In reply to Julien Olivain
---
 package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/freescale-imx/firmware-imx/firmware-imx.mk +1 -1
index 0e2ff7bba2..b70b581523 100644
@@ -18,7 +18,7 @@ define FIRMWARE_IMX_EXTRACT_CMDS
 	$(call FREESCALE_IMX_EXTRACT_HELPER,$(FIRMWARE_IMX_DL_DIR)/$(FIRMWARE_IMX_SOURCE))
 endef
 
-ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
+ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M)$(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM),y)
 FIRMWARE_IMX_INSTALL_IMAGES = YES
 FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
 define FIRMWARE_IMX_PREPARE_LPDDR4_FW
Signature · 1 line
2.21.0
#4 lore raw

PATCH 3/5 package/imx-mkimage: add support for i.MX8MM

In reply to Julien Olivain
---
 package/imx-mkimage/imx-mkimage.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/imx-mkimage/imx-mkimage.mk +1 -1
index d8d8b10b32..c2a4379b44 100644
@@ -11,7 +11,7 @@ IMX_MKIMAGE_LICENSE = GPL-2.0+
 IMX_MKIMAGE_LICENSE_FILES = COPYING
 HOST_IMX_MKIMAGE_DEPENDENCIES = host-zlib
 
-ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
+ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M)$(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM),y)
 # i.MX8M needs a different binary
 define HOST_IMX_MKIMAGE_BUILD_CMDS
 	$(HOST_MAKE_ENV) $(MAKE) $(HOST_CONFIGURE_OPTS) \
Signature · 1 line
2.21.0
#5 lore raw

PATCH 4/5 board/freescale/common/imx: add support for i.MX8MM

In reply to Julien Olivain

For the boot image creation for the i.MX8MM, the main differences with i.MX8M are that there is no HDMI firmware image passed, and the ATF load address is different.

---
 board/freescale/common/imx/imx8-bootloader-prepare.sh | 7 +++++++
 board/freescale/common/imx/post-image.sh              | 4 ++++
 2 files changed, 11 insertions(+)
board/freescale/common/imx/imx8-bootloader-prepare.sh +7 -0
index 3b319693ea..df528b0df5 100755
@@ -15,6 +15,13 @@ main ()
 		rm -f ${BINARIES_DIR}/u-boot.its
 
 		${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
+		rm -f ${BINARIES_DIR}/u-boot.its
+
+		${HOST_DIR}/bin/mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	else
 		${HOST_DIR}/bin/mkimage_imx8 -commit > ${BINARIES_DIR}/mkimg.commit
 		cat ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/mkimg.commit > ${BINARIES_DIR}/u-boot-hash.bin
board/freescale/common/imx/post-image.sh +4 -0
index 12a5bea73b..d07ad2ef5d 100755
@@ -34,6 +34,8 @@ genimage_type()
 {
 	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
+		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
@@ -47,6 +49,8 @@ imx_offset()
 {
 	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "33K"
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
+		echo "33K"
 	else
 		echo "32K"
 	fi
Signature · 1 line
2.21.0
#6 lore raw

PATCH 5/5 configs/imx8mmpico: new defconfig

In reply to Julien Olivain
---
 .gitlab-ci.yml                         |  1 +
 DEVELOPERS                             |  2 +
 board/technexion/imx8mmpico/readme.txt | 96 ++++++++++++++++++++++++++
 configs/imx8mmpico_defconfig           | 39 +++++++++++
 4 files changed, 138 insertions(+)
 create mode 100644 board/technexion/imx8mmpico/readme.txt
 create mode 100644 configs/imx8mmpico_defconfig
.gitlab-ci.yml +1 -0
index 836944faf5..2557ce16b1 100644
@@ -196,6 +196,7 @@ imx6ulevk_defconfig: { extends: .defconfig }
 imx6ulpico_defconfig: { extends: .defconfig }
 imx7d-sdb_defconfig: { extends: .defconfig }
 imx7dpico_defconfig: { extends: .defconfig }
+imx8mmpico_defconfig: { extends: .defconfig }
 imx8mpico_defconfig: { extends: .defconfig }
 lego_ev3_defconfig: { extends: .defconfig }
 licheepi_zero_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 7025ac69ef..e745197380 100644
@@ -1259,7 +1259,9 @@ N:	Julien Grossholtz <[email protected]>
 F:	package/paho-mqtt-c
 
 N:	Julien Olivain <[email protected]>
+F:	board/technexion/imx8mmpico/
 F:	board/technexion/imx8mpico/
+F:	configs/imx8mmpico_defconfig
 F:	configs/imx8mpico_defconfig
 
 N:	Julien Viard de Galbert <[email protected]>
board/technexion/imx8mmpico/readme.txt new file +96 -0

96 lines not on this page · raw message

configs/imx8mmpico_defconfig new file +39 -0
new file mode 100644
index 0000000000..d30dc0672a
@@ -0,0 +1,39 @@
+BR2_aarch64=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/imx8-bootloader-prepare.sh board/freescale/common/imx/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/imx8mm-pico-pi.dtb"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,TechNexion,linux,7ff5de3f5d79c77ab7ecaa6e346ad0e7fb7f0570)/linux-7ff5de3f5d79c77ab7ecaa6e346ad0e7fb7f0570.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="tn_imx8"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-pico-pi freescale/imx8mm-pico-pi-ili9881c freescale/imx8mm-pico-pi-sn65dsi84-hj070na"
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,TechNexion,u-boot-edm,d3391226ba25b1cc6cba7e6c15a2a7e09319b969)/u-boot-edm-d3391226ba25b1cc6cba7e6c15a2a7e09319b969.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pico-imx8mm"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_IMX_MKIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
Signature · 1 line
2.21.0