Skip to contentSkip to conversation

migration/xbzrle: update cache and current_data in one place

PATCH In review Wei Yang 3 participants 3 messages Jun 10, 2019 – Jun 12, 2019

lore
Share & tools
lore

Wei Yang

author
#0 lore raw

PATCH v2 1/1 migration/xbzrle: update cache and current_data in one place

When we are not in the last_stage, we need to update the cache if page is not the same.

Currently this procedure is scattered in two places and mixed with encoding status check.

This patch extract this general step out to make the code a little bit easy to read.

---
v2: give more comment on the behavior

---
 migration/ram.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
migration/ram.c +15 -10
index e9b40d636d..17cc9b2b44 100644
@@ -1594,25 +1594,30 @@ static int save_xbzrle_page(RAMState *rs, uint8_t **current_data,
     encoded_len = xbzrle_encode_buffer(prev_cached_page, XBZRLE.current_buf,
                                        TARGET_PAGE_SIZE, XBZRLE.encoded_buf,
                                        TARGET_PAGE_SIZE);
+
+    /*
+     * Update the cache contents, so that it corresponds to the data
+     * sent, in all cases except where we skip the page.
+     */
+    if (!last_stage && encoded_len != 0) {
+        memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
+        /*
+         * In the case where we couldn't compress, ensure that the caller
+         * sends the data from the cache, since the guest might have
+         * changed the RAM since we copied it.
+         */
+        *current_data = prev_cached_page;
+    }
+
     if (encoded_len == 0) {
         trace_save_xbzrle_page_skipping();
         return 0;
     } else if (encoded_len == -1) {
         trace_save_xbzrle_page_overflow();
         xbzrle_counters.overflow++;
-        /* update data in the cache */
-        if (!last_stage) {
-            memcpy(prev_cached_page, *current_data, TARGET_PAGE_SIZE);
-            *current_data = prev_cached_page;
-        }
         return -1;
     }
 
-    /* we need to update the data in the cache, in order to get the same data */
-    if (!last_stage) {
-        memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
-    }
-
     /* Send XBZRLE based compressed page */
     bytes_xbzrle = save_page_header(rs, rs->f, block,
                                     offset | RAM_SAVE_FLAG_XBZRLE);
Signature · 1 line
2.19.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 11 lines · * Wei Yang ([email protected]) wrote:

When we are not in the last_stage, we need to update the cache if page is not the same.

Currently this procedure is scattered in two places and mixed with encoding status check.

This patch extract this general step out to make the code a little bit easy to read.

Quoted 54 lines

---
v2: give more comment on the behavior

---
 migration/ram.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
migration/ram.c +15 -10
index e9b40d636d..17cc9b2b44 100644
@@ -1594,25 +1594,30 @@ static int save_xbzrle_page(RAMState *rs, uint8_t **current_data,
     encoded_len = xbzrle_encode_buffer(prev_cached_page, XBZRLE.current_buf,
                                        TARGET_PAGE_SIZE, XBZRLE.encoded_buf,
                                        TARGET_PAGE_SIZE);
+
+    /*
+     * Update the cache contents, so that it corresponds to the data
+     * sent, in all cases except where we skip the page.
+     */
+    if (!last_stage && encoded_len != 0) {
+        memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
+        /*
+         * In the case where we couldn't compress, ensure that the caller
+         * sends the data from the cache, since the guest might have
+         * changed the RAM since we copied it.
+         */
+        *current_data = prev_cached_page;
+    }
+
     if (encoded_len == 0) {
         trace_save_xbzrle_page_skipping();
         return 0;
     } else if (encoded_len == -1) {
         trace_save_xbzrle_page_overflow();
         xbzrle_counters.overflow++;
-        /* update data in the cache */
-        if (!last_stage) {
-            memcpy(prev_cached_page, *current_data, TARGET_PAGE_SIZE);
-            *current_data = prev_cached_page;
-        }
         return -1;
     }
 
-    /* we need to update the data in the cache, in order to get the same data */
-    if (!last_stage) {
-        memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
-    }
-
     /* Send XBZRLE based compressed page */
     bytes_xbzrle = save_page_header(rs, rs->f, block,
                                     offset | RAM_SAVE_FLAG_XBZRLE);
Signature · 1 line
2.19.1

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK