net: mvpp2: prs: Fixes for VID filtering
Subsystems (3)
cover net: mvpp2: prs: Fixes for VID filtering
This series fixes some issues with VID filtering offload, mainly due to the wrong ranges being used in the TCAM header parser.
The first patch fixes a bug where removing a VLAN from a port's whitelist would also remove it from other port's, if they are on the same PPv2 instance.
The second patch makes so that we don't invalidate the wrong TCAM entries when clearing the whole whitelist.
Maxime Chevallier (2):
net: mvpp2: prs: Fix parser range for VID filtering
net: mvpp2: prs: Use the correct helpers when removing all VID filters
.../net/ethernet/marvell/mvpp2/mvpp2_prs.c | 23 ++++++++++--------- 1 file changed, 12 insertions(+), 11 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/2 net: mvpp2: prs: Fix parser range for VID filtering
VID filtering is implemented in the Header Parser, with one range of 11 vids being assigned for each no-loopback port.
Make sure we use the per-port range when looking for existing entries in the Parser.
Since we used a global range instead of a per-port one, this causes VIDs to be removed from the whitelist from all ports of the same PPv2 instance.
--- drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +8 -9
@@ -1905,8 +1905,7 @@ static int mvpp2_prs_ip6_init(struct mvpp2 *priv) }/* Find tcam entry with matched pair <vid,port> */ -static int mvpp2_prs_vid_range_find (struct mvpp2 *priv,int pmap,u16 vid, -u16 mask) +static int mvpp2_prs_vid_range_find (struct mvpp2_port *port,u16 vid,u16 mask) {unsigned char byte[2 ], enable[2 ];struct mvpp2_prs_entry pe;
@@ -1914,13 +1913,13 @@ static int mvpp2_prs_vid_range_find(struct mvpp2 *priv, int pmap, u16 vid,int tid;/* Go through the all entries with MVPP2_PRS_LU_VID */ -for (tid =MVPP2_PE_VID_FILT_RANGE_START ; - tid <=MVPP2_PE_VID_FILT_RANGE_END ; tid++) { -if (!priv->prs_shadow[tid].valid || - priv->prs_shadow[tid].lu !=MVPP2_PRS_LU_VID ) +for (tid =MVPP2_PRS_VID_PORT_FIRST (port->id); + tid <=MVPP2_PRS_VID_PORT_LAST (port->id); tid++) { +if (!port->priv->prs_shadow[tid].valid || + port->priv->prs_shadow[tid].lu !=MVPP2_PRS_LU_VID )continue ; -mvpp2_prs_init_from_hw (priv, &pe, tid); +mvpp2_prs_init_from_hw (port->priv, &pe, tid);mvpp2_prs_tcam_data_byte_get (&pe,2 , &byte[0 ], &enable[0 ]);mvpp2_prs_tcam_data_byte_get (&pe,3 , &byte[1 ], &enable[1 ]);
@@ -1950,7 +1949,7 @@ int mvpp2_prs_vid_entry_add(struct mvpp2_port *port, u16 vid)memset (&pe,0 ,sizeof (pe));/* Scan TCAM and see if entry with this <vid,port> already exist */ - tid =mvpp2_prs_vid_range_find (priv, (1 << port->id), vid, mask); + tid =mvpp2_prs_vid_range_find (port, vid, mask); reg_val =mvpp2_read (priv,MVPP2_MH_REG (port->id));if (reg_val &MVPP2_DSA_EXTENDED )
@@ -2008,7 +2007,7 @@ void mvpp2_prs_vid_entry_remove(struct mvpp2_port *port, u16 vid)int tid;/* Scan TCAM and see if entry with this <vid,port> already exist */ - tid =mvpp2_prs_vid_range_find (priv, (1 << port->id), vid,0xfff ); + tid =mvpp2_prs_vid_range_find (port, vid,0xfff );/* No such entry */ if (tid <0 )
Signature · 1 line
2.20.1
PATCH 2/2 net: mvpp2: prs: Use the correct helpers when removing all VID filters
In reply to Maxime ChevallierWhen removing all VID filters, the mvpp2_prs_vid_entry_remove would be called with the TCAM id incorrectly used as a VID, causing the wrong TCAM entries to be invalidated.
Fix this by directly invalidating entries in the VID range.
--- drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +4 -2
@@ -2025,8 +2025,10 @@ void mvpp2_prs_vid_remove_all(struct mvpp2_port *port)for (tid =MVPP2_PRS_VID_PORT_FIRST (port->id); tid <=MVPP2_PRS_VID_PORT_LAST (port->id); tid++) { -if (priv->prs_shadow[tid].valid) -mvpp2_prs_vid_entry_remove (port, tid); +if (priv->prs_shadow[tid].valid) { +mvpp2_prs_hw_inv (priv, tid); + priv->prs_shadow[tid].valid = false; + } } }
Signature · 1 line
2.20.1
David Miller
maintainerFrom: Maxime Chevallier <[email protected]>
Date: Tue, 11 Jun 2019 11:51:41 +0200
Quoted 9 lines
This series fixes some issues with VID filtering offload, mainly due to the wrong ranges being used in the TCAM header parser.
The first patch fixes a bug where removing a VLAN from a port's whitelist would also remove it from other port's, if they are on the same PPv2 instance.
The second patch makes so that we don't invalidate the wrong TCAM entries when clearing the whole whitelist.
Series applied.