Skip to contentSkip to conversation

drm/edid: parse CEA blocks embedded in DisplayID

PATCH Superseded Andres Rodriguez 2 participants 2 messages Jun 12, 2019 – Jun 13, 2019

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/edid: parse CEA blocks embedded in DisplayID

DisplayID blocks allow embedding of CEA blocks. The payloads are identical to traditional top level CEA extension blocks, but the header is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID block. Additionally, it adds support for parsing the embedded CTA header. No further changes are necessary due to payload parity.

This change enables audio support for the Valve Index HMD.

---
 drivers/gpu/drm/drm_edid.c  | 79 +++++++++++++++++++++++++++++++++----
 include/drm/drm_displayid.h |  1 +
 2 files changed, 72 insertions(+), 8 deletions(-)
drivers/gpu/drm/drm_edid.c +71 -8
index 649cfd8b4200..3e71c6ae48d4 100644
@@ -1339,6 +1339,8 @@ MODULE_PARM_DESC(edid_fixup,
 
 static void drm_get_displayid(struct drm_connector *connector,
 			      struct edid *edid);
+static u8 *drm_find_displayid_extension(const struct edid *edid);
+static int validate_displayid(u8 *displayid, int length, int idx);
 
 static int drm_edid_block_checksum(const u8 *raw_edid)
 {
@@ -2885,7 +2887,40 @@ static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id)
 
 static u8 *drm_find_cea_extension(const struct edid *edid)
 {
-	return drm_find_edid_extension(edid, CEA_EXT);
+	int ret;
+	int idx = 1;
+	int length = EDID_LENGTH;
+	struct displayid_block *block;
+	u8 *cea = NULL;
+	u8 *displayid = NULL;
+
+	cea = drm_find_edid_extension(edid, CEA_EXT);
+
+	/* CEA blocks can also be found embedded in a DisplayID block */
+	if (!cea) {
+		displayid = drm_find_displayid_extension(edid);
+		if (!displayid)
+			return NULL;
+
+		ret = validate_displayid(displayid, length, idx);
+		if (ret)
+			return NULL;
+
+		idx += sizeof(struct displayid_hdr);
+		while (block = (struct displayid_block *)&displayid[idx],
+		       idx + sizeof(struct displayid_block) <= length &&
+		       idx + sizeof(struct displayid_block) + block->num_bytes <= length &&
+		       block->num_bytes > 0) {
+			idx += block->num_bytes + sizeof(struct displayid_block);
+			switch (block->tag) {
+			case DATA_BLOCK_CTA:
+				cea = (u8 *)block;
+				break;
+			}
+		}
+	}
+
+	return cea;
 }
 
 static u8 *drm_find_displayid_extension(const struct edid *edid)
@@ -3616,13 +3651,38 @@ cea_revision(const u8 *cea)
 static int
 cea_db_offsets(const u8 *cea, int *start, int *end)
 {
-	/* Data block offset in CEA extension block */
-	*start = 4;
-	*end = cea[2];
-	if (*end == 0)
-		*end = 127;
-	if (*end < 4 || *end > 127)
-		return -ERANGE;
+
+	/* DisplayID CTA extension blocks and top-level CEA EDID
+	 * blocks headers differ in two byte definitions:
+	 *   1) Byte 2 of the header specifies length differently,
+	 *   2) Byte 3 is only present in the CEA top level block.
+	 *
+	 * The different definitions for byte 2 follow.
+	 *
+	 * DisplayID CTA extension block defines byte 2 as:
+	 *   Number of payload bytes
+	 *
+	 * CEA EDID block defines byte 2 as:
+	 *   Byte number (decimal) within this block where the 18-byte
+	 *   DTDs begin. If no non-DTD data is present in this extension
+	 *   block, the value should be set to 04h (the byte after next).
+	 *   If set to 00h, there are no DTDs present in this block and
+	 *   no non-DTD data.
+	 */
+	if (cea[0] == DATA_BLOCK_CTA) {
+		*start = 3;
+		*end = *start + cea[2];
+	} else if (cea[0] == CEA_EXT) {
+		*start = 4;
+		*end = cea[2];
+		/* Data block offset in CEA extension block */
+		if (*end == 0)
+			*end = 127;
+		if (*end < 4 || *end > 127)
+			return -ERANGE;
+	} else
+		return -ENOTSUPP;
+
 	return 0;
 }
 
@@ -5240,6 +5300,9 @@ static int drm_parse_display_id(struct drm_connector *connector,
 		case DATA_BLOCK_TYPE_1_DETAILED_TIMING:
 			/* handled in mode gathering code. */
 			break;
+		case DATA_BLOCK_CTA:
+			/* handled in the cea parser code. */
+			break;
 		default:
 			DRM_DEBUG_KMS("found DisplayID tag 0x%x, unhandled\n", block->tag);
 			break;
include/drm/drm_displayid.h +1 -0
index c0d4df6a606f..c7af857f4764 100644
@@ -40,6 +40,7 @@
 #define DATA_BLOCK_DISPLAY_INTERFACE 0x0f
 #define DATA_BLOCK_STEREO_DISPLAY_INTERFACE 0x10
 #define DATA_BLOCK_TILED_DISPLAY 0x12
+#define DATA_BLOCK_CTA 0x81
 
 #define DATA_BLOCK_VENDOR_SPECIFIC 0x7f
 
Signature · 6 lines
2.19.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw
Quoted 30 lines · Andres Rodriguez

DisplayID blocks allow embedding of CEA blocks. The payloads are identical to traditional top level CEA extension blocks, but the header is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID block. Additionally, it adds support for parsing the embedded CTA header. No further changes are necessary due to payload parity.

This change enables audio support for the Valve Index HMD.

---
 drivers/gpu/drm/drm_edid.c  | 79 +++++++++++++++++++++++++++++++++----
 include/drm/drm_displayid.h |  1 +
 2 files changed, 72 insertions(+), 8 deletions(-)
drivers/gpu/drm/drm_edid.c +2 -0
index 649cfd8b4200..3e71c6ae48d4 100644
@@ -1339,6 +1339,8 @@ MODULE_PARM_DESC(edid_fixup,
 
 static void drm_get_displayid(struct drm_connector *connector,
 			      struct edid *edid);
+static u8 *drm_find_displayid_extension(const struct edid *edid);
+static int validate_displayid(u8 *displayid, int length, int idx);
 
 static int drm_edid_block_checksum(const u8 *raw_edid)
 {

drivers/gpu/drm/drm_edid.c static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id) · line 2895

Quoted 10 lines
drivers/gpu/drm/drm_edid.c +6 -1
@@ -2885,7 +2887,40 @@ static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id)
 
 static u8 *drm_find_cea_extension(const struct edid *edid)
 {
-	return drm_find_edid_extension(edid, CEA_EXT);
+	int ret;
+	int idx = 1;
+	int length = EDID_LENGTH;
+	struct displayid_block *block;
+	u8 *cea = NULL;
+	u8 *displayid = NULL;

Unnecessary initializations.

drivers/gpu/drm/drm_edid.c static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id) · line 2900

Quoted 5 lines
drivers/gpu/drm/drm_edid.c +5 -0
+
+	cea = drm_find_edid_extension(edid, CEA_EXT);
+
+	/* CEA blocks can also be found embedded in a DisplayID block */
+	if (!cea) {

It's customary to return early to reduce indent on the following code, i.e.

	if (cea)
		return cea;

drivers/gpu/drm/drm_edid.c static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id) · line 2913

Quoted 13 lines
drivers/gpu/drm/drm_edid.c +13 -0
+		displayid = drm_find_displayid_extension(edid);
+		if (!displayid)
+			return NULL;
+
+		ret = validate_displayid(displayid, length, idx);
+		if (ret)
+			return NULL;
+
+		idx += sizeof(struct displayid_hdr);
+		while (block = (struct displayid_block *)&displayid[idx],
+		       idx + sizeof(struct displayid_block) <= length &&
+		       idx + sizeof(struct displayid_block) + block->num_bytes <= length &&
+		       block->num_bytes > 0) {

I'm sure there's a for loop in there somewhere desperate to get out. The above is unnecessarily tricky.

drivers/gpu/drm/drm_edid.c static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id) · line 2919

Quoted 6 lines
drivers/gpu/drm/drm_edid.c +6 -0
+			idx += block->num_bytes + sizeof(struct displayid_block);
+			switch (block->tag) {
+			case DATA_BLOCK_CTA:
+				cea = (u8 *)block;
+				break;
+			}

Looks like an if statement here. Why do you continue the while loop after you've found the block?

BR,
Jani.

Quoted 74 lines
drivers/gpu/drm/drm_edid.c +39 -7
+		}
+	}
+
+	return cea;
 }
 
 static u8 *drm_find_displayid_extension(const struct edid *edid)
@@ -3616,13 +3651,38 @@ cea_revision(const u8 *cea)
 static int
 cea_db_offsets(const u8 *cea, int *start, int *end)
 {
-	/* Data block offset in CEA extension block */
-	*start = 4;
-	*end = cea[2];
-	if (*end == 0)
-		*end = 127;
-	if (*end < 4 || *end > 127)
-		return -ERANGE;
+
+	/* DisplayID CTA extension blocks and top-level CEA EDID
+	 * blocks headers differ in two byte definitions:
+	 *   1) Byte 2 of the header specifies length differently,
+	 *   2) Byte 3 is only present in the CEA top level block.
+	 *
+	 * The different definitions for byte 2 follow.
+	 *
+	 * DisplayID CTA extension block defines byte 2 as:
+	 *   Number of payload bytes
+	 *
+	 * CEA EDID block defines byte 2 as:
+	 *   Byte number (decimal) within this block where the 18-byte
+	 *   DTDs begin. If no non-DTD data is present in this extension
+	 *   block, the value should be set to 04h (the byte after next).
+	 *   If set to 00h, there are no DTDs present in this block and
+	 *   no non-DTD data.
+	 */
+	if (cea[0] == DATA_BLOCK_CTA) {
+		*start = 3;
+		*end = *start + cea[2];
+	} else if (cea[0] == CEA_EXT) {
+		*start = 4;
+		*end = cea[2];
+		/* Data block offset in CEA extension block */
+		if (*end == 0)
+			*end = 127;
+		if (*end < 4 || *end > 127)
+			return -ERANGE;
+	} else
+		return -ENOTSUPP;
+
 	return 0;
 }
 
@@ -5240,6 +5300,9 @@ static int drm_parse_display_id(struct drm_connector *connector,
 		case DATA_BLOCK_TYPE_1_DETAILED_TIMING:
 			/* handled in mode gathering code. */
 			break;
+		case DATA_BLOCK_CTA:
+			/* handled in the cea parser code. */
+			break;
 		default:
 			DRM_DEBUG_KMS("found DisplayID tag 0x%x, unhandled\n", block->tag);
 			break;
include/drm/drm_displayid.h +1 -0
index c0d4df6a606f..c7af857f4764 100644
@@ -40,6 +40,7 @@
 #define DATA_BLOCK_DISPLAY_INTERFACE 0x0f
 #define DATA_BLOCK_STEREO_DISPLAY_INTERFACE 0x10
 #define DATA_BLOCK_TILED_DISPLAY 0x12
+#define DATA_BLOCK_CTA 0x81
 
 #define DATA_BLOCK_VENDOR_SPECIFIC 0x7f
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel