net: dsa: use switchdev attr and obj handlers
Subsystems (3)
v2 cover net: dsa: use switchdev attr and obj handlers
This series reduces boilerplate in the handling of switchdev attribute and object operations by using the switchdev_handle_* helpers, which check the targeted devices and recurse into their lower devices.
This also brings back the ability to inspect operations targeting the bridge device itself (where .orig_dev and .dev were originally the bridge device), even though that is of no use yet and skipped by this series.
Changes in v2: Only VLAN and (non-host) MDB objects not directly targeting the slave device are unsupported at the moment, so only skip these cases.
Vivien Didelot (4):
net: dsa: do not check orig_dev in vlan del
net: dsa: make cpu_dp non const
net: dsa: make dsa_slave_dev_check use const
net: dsa: use switchdev handle helpers
include/net/dsa.h | 2 +- net/dsa/port.c | 9 ------ net/dsa/slave.c | 80 ++++++++++++++++++++--------------------------- 3 files changed, 35 insertions(+), 56 deletions(-)
Signature · 1 line
2.21.0
PATCH v2 1/4 net: dsa: do not check orig_dev in vlan del
The current DSA code handling switchdev objects does not recurse into the lower devices thus is never called with an orig_dev member being a bridge device, hence remove this useless check.
At the same time, remove the comments about the callers, which is unlikely to be updated if the code changes and thus will be confusing.
--- net/dsa/port.c | 9 --------- 1 file changed, 9 deletions(-)
net/dsa/port.c +0 -9
@@ -336,9 +336,6 @@ int dsa_port_vlan_add(struct dsa_port *dp, .vlan = vlan, }; -/* Can be called from dsa_slave_port_obj_add() or -* dsa_slave_vlan_rx_add_vid() -*/ if (!dp->bridge_dev ||br_vlan_enabled (dp->bridge_dev))return dsa_port_notify (dp,DSA_NOTIFIER_VLAN_ADD , &info);
@@ -354,12 +351,6 @@ int dsa_port_vlan_del(struct dsa_port *dp, .vlan = vlan, }; -if (vlan->obj.orig_dev &&netif_is_bridge_master (vlan->obj.orig_dev)) -return -EOPNOTSUPP ; - -/* Can be called from dsa_slave_port_obj_del() or -* dsa_slave_vlan_rx_kill_vid() -*/ if (!dp->bridge_dev ||br_vlan_enabled (dp->bridge_dev))return dsa_port_notify (dp,DSA_NOTIFIER_VLAN_DEL , &info);
Signature · 1 line
2.21.0
PATCH v2 2/4 net: dsa: make cpu_dp non const
In reply to Vivien DidelotA port may trigger operations on its dedicated CPU port, so using cpu_dp as const will raise warnings. Make cpu_dp non const.
--- include/net/dsa.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/net/dsa.h +1 -1
@@ -181,7 +181,7 @@ struct dsa_port {struct dsa_switch *ds;unsigned int index;const char *name; -const struct dsa_port *cpu_dp; +struct dsa_port *cpu_dp;const char *mac;struct device_node *dn;unsigned int ageing_time;
Signature · 1 line
2.21.0
PATCH v2 3/4 net: dsa: make dsa_slave_dev_check use const
In reply to Vivien DidelotThe switchdev handle helpers make use of a device checking helper requiring a const net_device. Make dsa_slave_dev_check compliant to this.
--- net/dsa/slave.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/dsa/slave.c +2 -2
@@ -22,7 +22,7 @@#include "dsa_priv.h" -static bool dsa_slave_dev_check (struct net_device *dev); +static bool dsa_slave_dev_check (const struct net_device *dev);/* slave mii_bus handling ***************************************************/ static int dsa_slave_phy_read (struct mii_bus *bus,int addr,int reg)
@@ -1408,7 +1408,7 @@ void dsa_slave_destroy(struct net_device *slave_dev)free_netdev (slave_dev); } -static bool dsa_slave_dev_check (struct net_device *dev) +static bool dsa_slave_dev_check (const struct net_device *dev) {return dev->netdev_ops == &dsa_slave_netdev_ops; }
Signature · 1 line
2.21.0
PATCH v2 4/4 net: dsa: use switchdev handle helpers
In reply to Vivien DidelotGet rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface.
This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches.
Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements.
--- net/dsa/slave.c | 76 +++++++++++++++++++++---------------------------- 1 file changed, 32 insertions(+), 44 deletions(-)
net/dsa/slave.c +32 -44
@@ -311,7 +311,8 @@ static int dsa_slave_port_attr_set(struct net_device *dev,static int dsa_slave_port_obj_add (struct net_device *dev,const struct switchdev_obj *obj, -struct switchdev_trans *trans) +struct switchdev_trans *trans, +struct netlink_ext_ack *extack) {struct dsa_port *dp =dsa_slave_to_port (dev);int err;
@@ -323,6 +324,8 @@ static int dsa_slave_port_obj_add(struct net_device *dev,switch (obj->id) {case SWITCHDEV_OBJ_ID_PORT_MDB : +if (obj->orig_dev != dev) +return -EOPNOTSUPP ; err =dsa_port_mdb_add (dp,SWITCHDEV_OBJ_PORT_MDB (obj), trans);break ;case SWITCHDEV_OBJ_ID_HOST_MDB :
@@ -333,6 +336,8 @@ static int dsa_slave_port_obj_add(struct net_device *dev, trans);break ;case SWITCHDEV_OBJ_ID_PORT_VLAN : +if (obj->orig_dev != dev) +return -EOPNOTSUPP ; err =dsa_port_vlan_add (dp,SWITCHDEV_OBJ_PORT_VLAN (obj), trans);break ;
@@ -352,6 +357,8 @@ static int dsa_slave_port_obj_del(struct net_device *dev,switch (obj->id) {case SWITCHDEV_OBJ_ID_PORT_MDB : +if (obj->orig_dev != dev) +return -EOPNOTSUPP ; err =dsa_port_mdb_del (dp,SWITCHDEV_OBJ_PORT_MDB (obj));break ;case SWITCHDEV_OBJ_ID_HOST_MDB :
@@ -361,6 +368,8 @@ static int dsa_slave_port_obj_del(struct net_device *dev, err =dsa_port_mdb_del (dp->cpu_dp,SWITCHDEV_OBJ_PORT_MDB (obj));break ;case SWITCHDEV_OBJ_ID_PORT_VLAN : +if (obj->orig_dev != dev) +return -EOPNOTSUPP ; err =dsa_port_vlan_del (dp,SWITCHDEV_OBJ_PORT_VLAN (obj));break ;default :
@@ -1479,19 +1488,6 @@ static int dsa_slave_netdevice_event(struct notifier_block *nb,return NOTIFY_DONE ; } -static int -dsa_slave_switchdev_port_attr_set_event (struct net_device *netdev, -struct switchdev_notifier_port_attr_info *port_attr_info) -{ -int err; - - err =dsa_slave_port_attr_set (netdev, port_attr_info->attr, - port_attr_info->trans); - - port_attr_info->handled = true; -return notifier_from_errno (err); -} -struct dsa_switchdev_event_work {struct work_struct work;struct switchdev_notifier_fdb_info fdb_info;
@@ -1566,13 +1562,18 @@ static int dsa_slave_switchdev_event(struct notifier_block *unused, {struct net_device *dev =switchdev_notifier_info_to_dev (ptr);struct dsa_switchdev_event_work *switchdev_work; +int err; + +if (event ==SWITCHDEV_PORT_ATTR_SET ) { + err =switchdev_handle_port_attr_set (dev, ptr, + dsa_slave_dev_check, + dsa_slave_port_attr_set); +return notifier_from_errno (err); + }if (!dsa_slave_dev_check (dev))return NOTIFY_DONE ; -if (event ==SWITCHDEV_PORT_ATTR_SET ) -return dsa_slave_switchdev_port_attr_set_event (dev, ptr); - switchdev_work =kzalloc (sizeof (*switchdev_work),GFP_ATOMIC );if (!switchdev_work)return NOTIFY_BAD ;
@@ -1602,41 +1603,28 @@ static int dsa_slave_switchdev_event(struct notifier_block *unused,return NOTIFY_BAD ; } -static int -dsa_slave_switchdev_port_obj_event (unsigned long event, -struct net_device *netdev, -struct switchdev_notifier_port_obj_info *port_obj_info) -{ -int err = -EOPNOTSUPP ; - -switch (event) { -case SWITCHDEV_PORT_OBJ_ADD : - err =dsa_slave_port_obj_add (netdev, port_obj_info->obj, - port_obj_info->trans); -break ; -case SWITCHDEV_PORT_OBJ_DEL : - err =dsa_slave_port_obj_del (netdev, port_obj_info->obj); -break ; - } - - port_obj_info->handled = true; -return notifier_from_errno (err); -} -static int dsa_slave_switchdev_blocking_event (struct notifier_block *unused,unsigned long event,void *ptr) {struct net_device *dev =switchdev_notifier_info_to_dev (ptr); - -if (!dsa_slave_dev_check (dev)) -return NOTIFY_DONE ; +int err;switch (event) { -case SWITCHDEV_PORT_OBJ_ADD :/* fall through */ +case SWITCHDEV_PORT_OBJ_ADD : + err =switchdev_handle_port_obj_add (dev, ptr, + dsa_slave_dev_check, + dsa_slave_port_obj_add); +return notifier_from_errno (err);case SWITCHDEV_PORT_OBJ_DEL : -return dsa_slave_switchdev_port_obj_event (event, dev, ptr); + err =switchdev_handle_port_obj_del (dev, ptr, + dsa_slave_dev_check, + dsa_slave_port_obj_del); +return notifier_from_errno (err);case SWITCHDEV_PORT_ATTR_SET : -return dsa_slave_switchdev_port_attr_set_event (dev, ptr); + err =switchdev_handle_port_attr_set (dev, ptr, + dsa_slave_dev_check, + dsa_slave_port_attr_set); +return notifier_from_errno (err); }return NOTIFY_DONE ;
Signature · 1 line
2.21.0
David Miller
maintainerFrom: Vivien Didelot <[email protected]>
Date: Fri, 14 Jun 2019 13:49:18 -0400
Quoted 10 lines
This series reduces boilerplate in the handling of switchdev attribute and object operations by using the switchdev_handle_* helpers, which check the targeted devices and recurse into their lower devices.
This also brings back the ability to inspect operations targeting the bridge device itself (where .orig_dev and .dev were originally the bridge device), even though that is of no use yet and skipped by this series.
Changes in v2: Only VLAN and (non-host) MDB objects not directly targeting the slave device are unsupported at the moment, so only skip these cases.
Series applied.