Skip to contentSkip to conversation

ARM: dts: qcom: ipq4019: directly define voltage per opp

PATCH New Christian Lamparter 1 participant 1 message Jun 15, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: qcom: ipq4019: directly define voltage per opp

From: Pavel Kubelun <[email protected]>

This should align opp table with what it was before converting to OPP v2.

---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
arch/arm/boot/dts/qcom-ipq4019.dtsi +5 -1
index c7fa9f61e1f1..0e3e79442c50 100644
@@ -111,20 +111,24 @@
 
 		opp-48000000 {
 			opp-hz = /bits/ 64 <48000000>;
+			opp-microvolt = <1100000>;
 			clock-latency-ns = <256000>;
 		};
 		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
 			clock-latency-ns = <256000>;
 		};
 		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
 			clock-latency-ns = <256000>;
 		};
 		opp-716000000 {
 			opp-hz = /bits/ 64 <716000000>;
+			opp-microvolt = <1100000>;
 			clock-latency-ns = <256000>;
- 		};
+		};
 	};
 
 	memory {
Signature · 1 line
2.20.1