ARM/arm64: dts: exynos: Add support for Mali
Subsystems (7)
Krzysztof Kozlowski
maintainercover ARM/arm64: dts: exynos: Add support for Mali
Hi,
Inspired by patch from Joseph Kogut [1], let's add support for Mali GPUs to most of other boards. However it was tested only on Odroid U3 (Exynos4412) and not fully because requirement of special Mesa drivers with Lima support.
Even without tests it brings full description of hardware and replaces some out-of-tree downstream code (e.g. in Tizen).
Comments and tests are welcomed.
[1] https://patchwork.kernel.org/patch/10996887/
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
clk: samsung: Add bus clock for GPU/G3D on Exynos4412
ARM: dts: exynos: Fix language typo and indentation
ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4
arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7
ARM: multi_v7_defconfig: Enable Panfrost and LIMA drivers
ARM: exynos_defconfig: Enable Panfrost and LIMA drivers
arm64: defconfig: Enable Panfrost driver
.../bindings/gpu/arm,mali-midgard.txt | 1 + .../bindings/gpu/arm,mali-utgard.txt | 1 + arch/arm/boot/dts/exynos3250-artik5.dtsi | 5 ++ arch/arm/boot/dts/exynos3250-monk.dts | 5 ++ arch/arm/boot/dts/exynos3250-rinato.dts | 5 ++ arch/arm/boot/dts/exynos3250.dtsi | 33 ++++++++++++ arch/arm/boot/dts/exynos4.dtsi | 29 +++++++++++ arch/arm/boot/dts/exynos4210-origen.dts | 5 ++ arch/arm/boot/dts/exynos4210-trats.dts | 4 ++ .../boot/dts/exynos4210-universal_c210.dts | 5 ++ arch/arm/boot/dts/exynos4210.dtsi | 36 +++++++++++-- .../boot/dts/exynos4412-itop-scp-core.dtsi | 5 ++ arch/arm/boot/dts/exynos4412-midas.dtsi | 5 ++ .../boot/dts/exynos4412-odroid-common.dtsi | 5 ++ arch/arm/boot/dts/exynos4412.dtsi | 32 ++++++++++++ arch/arm/configs/exynos_defconfig | 3 +- arch/arm/configs/multi_v7_defconfig | 3 +- .../dts/exynos/exynos5433-tm2-common.dtsi | 5 ++ arch/arm64/boot/dts/exynos/exynos5433.dtsi | 51 +++++++++++++++++++ .../boot/dts/exynos/exynos7-espresso.dts | 5 ++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 11 ++++ arch/arm64/configs/defconfig | 2 +- drivers/clk/samsung/clk-exynos4.c | 1 + include/dt-bindings/clock/exynos4.h | 1 + 24 files changed, 251 insertions(+), 7 deletions(-)
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 1/10 dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
Add vendor compatibles for specific implementation of Mali Utgard (Exynos3250, Exynos4-family) and Midgard (Exynos5433, Exynos7).
--- Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt | 1 + Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 1 + 2 files changed, 2 insertions(+)
Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +1 -0
@@ -17,6 +17,7 @@ Required properties: * which must be preceded by one of the following vendor specifics: + "allwinner,sun50i-h6-mali" + "amlogic,meson-gxm-mali" + + "samsung,exynos5433-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali"
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +1 -0
@@ -17,6 +17,7 @@ Required properties: + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + samsung,exynos3250-mali + rockchip,rk3036-mali + rockchip,rk3066-mali + rockchip,rk3188-mali
Signature · 6 lines
2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [RFT 01/10] dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
Hi Krzysztof,
Quoted 26 lines · Krzysztof Kozlowski
Add vendor compatibles for specific implementation of Mali Utgard (Exynos3250, Exynos4-family) and Midgard (Exynos5433, Exynos7).
Signed-off-by Krzysztof Kozlowski <[email protected]>--- Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt | 1 + Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 1 + 2 files changed, 2 insertions(+)Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +1
-0@@ -17,6 +17,7 @@ Required properties: * which must be preceded by one of the following vendor specifics: + "allwinner,sun50i-h6-mali" + "amlogic,meson-gxm-mali" + + "samsung,exynos5433-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali"Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +0
-0
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt Required properties: · line 20
Quoted 4 lines
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +1
-0@@ -17,6 +17,7 @@ Required properties: + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + samsung,exynos3250-mali
I would prefer 'samsung,exynos4-mali', because historically Exynos4 was the first SoC with Mali400 and such prefix is already used for many hw blocks.
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt Required properties: · line 23
Quoted 3 lines
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +0
-0+ rockchip,rk3036-mali + rockchip,rk3066-mali + rockchip,rk3188-mali
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Krzysztof Kozlowski
maintainerRe: [RFT 01/10] dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
Quoted 25 lines · Marek Szyprowski
Hi Krzysztof,
Quoted 21 lines · Krzysztof Kozlowski
Add vendor compatibles for specific implementation of Mali Utgard (Exynos3250, Exynos4-family) and Midgard (Exynos5433, Exynos7).
Signed-off-by Krzysztof Kozlowski <[email protected]>--- Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt | 1 + Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 1 + 2 files changed, 2 insertions(+)Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +1
-0@@ -17,6 +17,7 @@ Required properties: * which must be preceded by one of the following vendor specifics: + "allwinner,sun50i-h6-mali" + "amlogic,meson-gxm-mali" + + "samsung,exynos5433-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali"
Quoted 12 lines
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt Required properties: · line 20
Quoted 9 lines
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +1
-0@@ -17,6 +17,7 @@ Required properties: + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + samsung,exynos3250-maliI would prefer 'samsung,exynos4-mali', because historically Exynos4 was the first SoC with Mali400 and such prefix is already used for many hw blocks.
Then maybe samsung,exynos4210-mali so it will not be confused with Exynos4415?
Best regards,
Krzysztof
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [RFT 01/10] dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
Hi Krzysztof,
Quoted 37 lines · Krzysztof Kozlowski
Quoted 24 lines · Marek Szyprowski
Hi Krzysztof,
Quoted 21 lines · Krzysztof Kozlowski
Add vendor compatibles for specific implementation of Mali Utgard (Exynos3250, Exynos4-family) and Midgard (Exynos5433, Exynos7).
Signed-off-by Krzysztof Kozlowski <[email protected]>--- Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt | 1 + Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 1 + 2 files changed, 2 insertions(+)Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +1
-0@@ -17,6 +17,7 @@ Required properties: * which must be preceded by one of the following vendor specifics: + "allwinner,sun50i-h6-mali" + "amlogic,meson-gxm-mali" + + "samsung,exynos5433-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali"Quoted 12 lines
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt Required properties: · line 20
Quoted 9 lines
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +1
-0@@ -17,6 +17,7 @@ Required properties: + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + samsung,exynos3250-maliI would prefer 'samsung,exynos4-mali', because historically Exynos4 was the first SoC with Mali400 and such prefix is already used for many hw blocks.
Quoted 1 line
Then maybe samsung,exynos4210-mali so it will not be confused with Exynos4415?
Fine for me. Exynos4415 also has Mali400, so don't see any issue here.
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Krzysztof Kozlowski
maintainerPATCH 2/10 clk: samsung: Add bus clock for GPU/G3D on Exynos4412
In reply to Krzysztof KozlowskiAdd ID and gate for bus clock for GPU (Mali 400) on Exynos4412.
--- drivers/clk/samsung/clk-exynos4.c | 1 + include/dt-bindings/clock/exynos4.h | 1 + 2 files changed, 2 insertions(+)
drivers/clk/samsung/clk-exynos4.c +1 -0
@@ -961,6 +961,7 @@ static const struct samsung_gate_clock exynos4210_gate_clks[] __initconst = {/* list of gate clocks supported in exynos4x12 soc */ static const struct samsung_gate_clock exynos4x12_gate_clks[]__initconst = { +GATE (CLK_ASYNC_G3D ,"async_g3d" ,"aclk200" ,GATE_IP_LEFTBUS ,6 ,0 ,0 ),GATE (CLK_AUDSS ,"audss" ,"sclk_epll" ,E4X12_GATE_IP_MAUDIO ,0 ,0 ,0 ),GATE (CLK_MDNIE0 ,"mdnie0" ,"aclk160" ,GATE_IP_LCD0 ,2 ,0 ,0 ),GATE (CLK_ROTATOR ,"rotator" ,"aclk200" ,E4X12_GATE_IP_IMAGE ,1 ,0 ,0 ),
include/dt-bindings/clock/exynos4.h +1 -0
@@ -187,6 +187,7 @@#define CLK_MIPI_HSI 349/* Exynos4210 only */ #define CLK_PIXELASYNCM0 351#define CLK_PIXELASYNCM1 352 +#define CLK_ASYNC_G3D 353/* Exynos4x12 only */ #define CLK_PWM_ISP_SCLK 379/* Exynos4x12 only */ #define CLK_SPI0_ISP_SCLK 380/* Exynos4x12 only */ #define CLK_SPI1_ISP_SCLK 381/* Exynos4x12 only */
Signature · 1 line
2.17.1
Sylwester Nawrocki
maintainerRe: [RFT 02/10] clk: samsung: Add bus clock for GPU/G3D on Exynos4412
Quoted 1 line · Krzysztof Kozlowski
Add ID and gate for bus clock for GPU (Mali 400) on Exynos4412.
Patch applied to clk/samsung tree, thanks.
Krzysztof Kozlowski
maintainerPATCH 3/10 ARM: dts: exynos: Fix language typo and indentation
In reply to Krzysztof KozlowskiCorrect language typo and wrong indentation.
--- arch/arm/boot/dts/exynos4210.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/exynos4210.dtsi +4 -4
@@ -8,7 +8,7 @@ * www.linaro.org * * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in
@@ -381,13 +381,13 @@ trips { cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ + temperature = <85000>; /* millicelsius */ }; cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ + temperature = <100000>; /* millicelsius */ }; cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ + temperature = <110000>; /* millicelsius */ }; }; };
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 4/10 ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
In reply to Krzysztof KozlowskiAdd nodes for GPU (Mali 400) to Exynos3250. This is still limited and not tested:
1. No dynamic voltage and frequency scaling,
2. Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused).
--- arch/arm/boot/dts/exynos3250-artik5.dtsi | 5 ++++ arch/arm/boot/dts/exynos3250-monk.dts | 5 ++++ arch/arm/boot/dts/exynos3250-rinato.dts | 5 ++++ arch/arm/boot/dts/exynos3250.dtsi | 33 ++++++++++++++++++++++++ 4 files changed, 48 insertions(+)
arch/arm/boot/dts/exynos3250-artik5.dtsi +5 -0
@@ -59,6 +59,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>;
arch/arm/boot/dts/exynos3250-monk.dts +5 -0
@@ -172,6 +172,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>;
arch/arm/boot/dts/exynos3250-rinato.dts +5 -0
@@ -244,6 +244,11 @@ }; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>;
arch/arm/boot/dts/exynos3250.dtsi +33 -0
@@ -126,6 +126,39 @@ }; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos3250-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&cmu CLK_ASYNC_G3D>, + <&cmu CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + /* TODO: operating points for DVFS */ + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 5/10 ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4
In reply to Krzysztof KozlowskiAdd nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing:
1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided,
2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused),
3. Regulator supplies on Trats board.
Limited testing on Odroid U3 (Exynos4412).
--- arch/arm/boot/dts/exynos4.dtsi | 29 +++++++++++++++++ arch/arm/boot/dts/exynos4210-origen.dts | 5 +++ arch/arm/boot/dts/exynos4210-trats.dts | 4 +++ .../boot/dts/exynos4210-universal_c210.dts | 5 +++ arch/arm/boot/dts/exynos4210.dtsi | 28 ++++++++++++++++ .../boot/dts/exynos4412-itop-scp-core.dtsi | 5 +++ arch/arm/boot/dts/exynos4412-midas.dtsi | 5 +++ .../boot/dts/exynos4412-odroid-common.dtsi | 5 +++ arch/arm/boot/dts/exynos4412.dtsi | 32 +++++++++++++++++++ 9 files changed, 118 insertions(+)
arch/arm/boot/dts/exynos4.dtsi +29 -0
@@ -51,6 +51,35 @@ serial3 = &serial_3; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos3250-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + power-domains = <&pd_g3d>; + status = "disabled"; + }; + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&combiner>;
arch/arm/boot/dts/exynos4210-origen.dts +5 -0
@@ -132,6 +132,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>;
arch/arm/boot/dts/exynos4210-trats.dts +4 -0
@@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hsotg { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>;
arch/arm/boot/dts/exynos4210-universal_c210.dts +5 -0
@@ -262,6 +262,11 @@ }; }; +&gpu { + mali-supply = <&buck2_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm/boot/dts/exynos4210.dtsi +28 -0
@@ -449,6 +449,34 @@ samsung,lcd-wb; }; +&gpu { + /* + * CLK_G3D is not actually bus clock but a IP-level clock. + * The bus clock is not described in hardware manual. + */ + clocks = <&clock CLK_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + opp-330000000 { + opp-hz = /bits/ 64 <330000000>; + opp-microvolt = <1100000>; + }; + }; +}; + &mdma1 { power-domains = <&pd_lcd0>; };
arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +5 -0
@@ -115,6 +115,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>;
arch/arm/boot/dts/exynos4412-midas.dtsi +5 -0
@@ -453,6 +453,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm/boot/dts/exynos4412-odroid-common.dtsi +5 -0
@@ -229,6 +229,11 @@ assigned-clock-rates = <0>, <176000000>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm/boot/dts/exynos4412.dtsi +32 -0
@@ -716,6 +716,38 @@ cpu-offset = <0x4000>; }; +&gpu { + clocks = <&clock CLK_ASYNC_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <875000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + &hdmi { compatible = "samsung,exynos4212-hdmi"; };
Signature · 6 lines
2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Krzysztof Kozlowski
maintainerPATCH 6/10 arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
In reply to Krzysztof KozlowskiAdd nodes for GPU (Mali T760) to Exynos5433. Missing element is the cooling device. Not tested on HW.
--- .../dts/exynos/exynos5433-tm2-common.dtsi | 5 ++ arch/arm64/boot/dts/exynos/exynos5433.dtsi | 51 +++++++++++++++++++ 2 files changed, 56 insertions(+)
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +5 -0
@@ -350,6 +350,11 @@ pinctrl-0 = <&te_irq>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; status = "okay";
arch/arm64/boot/dts/exynos/exynos5433.dtsi +51 -0
57 lines not on this page · raw message
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 7/10 arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7
In reply to Krzysztof KozlowskiAdd nodes for GPU (Mali T760) to Exynos7. Current support for Exynos7 misses a lot, including proper clocks, power domains, frequency and voltage scaling and cooling. However this still can provide basic GPU description. Not tested on HW.
--- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 5 +++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 11 +++++++++++ 2 files changed, 16 insertions(+)
arch/arm64/boot/dts/exynos/exynos7-espresso.dts +5 -0
@@ -59,6 +59,11 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &serial_2 { status = "okay"; };
arch/arm64/boot/dts/exynos/exynos7.dtsi +11 -0
@@ -78,6 +78,17 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + psci { compatible = "arm,psci-0.2"; method = "smc";
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 8/10 ARM: multi_v7_defconfig: Enable Panfrost and LIMA drivers
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost and LIMA drivers. Most of Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T7xx (Exynos542x).
As Mali GPU is quite popular among ARM vendors, other platforms will benefit as well.
--- arch/arm/configs/multi_v7_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/multi_v7_defconfig +2 -1
@@ -656,6 +656,8 @@ CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y
@@ -940,7 +942,6 @@ CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_TI_AEMIF=y CONFIG_IIO=y
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 9/10 ARM: exynos_defconfig: Enable Panfrost and LIMA drivers
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost and LIMA drivers. Most of Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T7xx (Exynos542x).
--- arch/arm/configs/exynos_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/exynos_defconfig +2 -1
@@ -212,6 +212,8 @@ CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y CONFIG_DRM_SII9234=y CONFIG_DRM_TOSHIBA_TC358764=y +CONFIG_DRM_LIMA=y +CONFIG_DRM_PANFROST=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_PWM=y
@@ -284,7 +286,6 @@ CONFIG_CROS_EC_SPI=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_EXYNOS_IOMMU=y -CONFIG_PM_DEVFREQ=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 10/10 arm64: defconfig: Enable Panfrost driver
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost driver, e.g. for Exynos5433 and Exynos7 (having Mali T760).
--- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/configs/defconfig +1 -1
@@ -517,6 +517,7 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m
@@ -717,7 +718,6 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y
Signature · 1 line
2.17.1