mt6392: Add support for MediaTek MT6392 PMIC
Subsystems (6)
v4 cover mt6392: Add support for MediaTek MT6392 PMIC
This patch series aims at bringing support for the MediaTek MT6392 PMIC. This PMIC is used on the MT8516 Pumpkin board.
This patch series adds support for the following features:
* PMIC keys
* regulator
* RTC
Fabien Parent (7):
dt-bindings: regulator: add support for MT6392
dt-bindings: mfd: mt6397: Add bindings for MT6392 PMIC
dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition
mfd: mt6397: Add support for MT6392 pmic
regulator: mt6392: Add support for MT6392 regulator
input: keyboard: mtk-pmic-keys: add MT6392 support
arm64: dts: mt6392: Add PMIC mt6392 dtsi
.../bindings/input/mtk-pmic-keys.txt | 11 +- .../devicetree/bindings/mfd/mt6397.txt | 12 +- .../bindings/regulator/mt6392-regulator.txt | 220 ++++++++ arch/arm64/boot/dts/mediatek/mt6392.dtsi | 208 ++++++++ drivers/input/keyboard/mtk-pmic-keys.c | 14 + drivers/mfd/mt6397-core.c | 47 ++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6392-regulator.c | 490 ++++++++++++++++++ include/linux/mfd/mt6392/core.h | 42 ++ include/linux/mfd/mt6392/registers.h | 487 +++++++++++++++++ include/linux/regulator/mt6392-regulator.h | 40 ++ 12 files changed, 1575 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/mt6392-regulator.txt create mode 100644 arch/arm64/boot/dts/mediatek/mt6392.dtsi create mode 100644 drivers/regulator/mt6392-regulator.c create mode 100644 include/linux/mfd/mt6392/core.h create mode 100644 include/linux/mfd/mt6392/registers.h create mode 100644 include/linux/regulator/mt6392-regulator.h
Signature · 1 line
2.20.1
PATCH v4 1/7 dt-bindings: regulator: add support for MT6392
Add binding documentation of the regulator for MT6392 SoCs.
---
v4:
* No change
v3:
* No change
v2:
* Use 'pmic' as node name for the pmic.
* Use 'regulators' as node name for the regulators
* use dash instead of underscore for regulator's node names.
--- .../bindings/regulator/mt6392-regulator.txt | 220 ++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mt6392-regulator.txt
Documentation/devicetree/bindings/regulator/mt6392-regulator.txt new file +220 -0
@@ -0,0 +1,220 @@ +Mediatek MT6392 Regulator + +Required properties: +- compatible: "mediatek,mt6392-regulator" +- mt6392regulator: List of regulators provided by this controller. It is named + according to its regulator type, buck_<name> and ldo_<name>. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vcore +LDO: + ldo_vxo22, ldo_vaud22, ldo_vcama, ldo_vaud28, ldo_vadc18, ldo_vcn35, + ldo_vio28. ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vcn18, ldo_vcamaf, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio, ldo_vm25, + ldo_vefuse + +Example: + pmic { + compatible = "mediatek,mt6392", "mediatek,mt6323"; + mediatek,system-power-controller; + + regulator { + compatible = "mediatek,mt6392-regulator"; + + mt6392_vproc_reg: buck-vproc { + regulator-name = "buck_vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vsys_reg: buck-vsys { + regulator-name = "buck_vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcore_reg: buck-vcore { + regulator-name = "buck_vcore"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vxo22_reg: ldo-vxo22 { + regulator-name = "ldo_vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vaud22_reg: ldo-vaud22 { + regulator-name = "ldo_vaud22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcama_reg: ldo-vcama { + regulator-name = "ldo_vcama"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vaud28_reg: ldo-vaud28 { + regulator-name = "ldo_vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vadc18_reg: ldo-vadc18 { + regulator-name = "ldo_vadc18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcn35_reg: ldo-vcn35 { + regulator-name = "ldo_vcn35"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vio28_reg: ldo-vio28 { + regulator-name = "ldo_vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vusb_reg: ldo-vusb { + regulator-name = "ldo_vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vmc_reg: ldo-vmc { + regulator-name = "ldo_vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-boot-on; + }; + + mt6392_vmch_reg: ldo-vmch { + regulator-name = "ldo_vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-boot-on; + }; + + mt6392_vemc3v3_reg: ldo-vemc3v3 { + regulator-name = "ldo_vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-boot-on; + }; + + mt6392_vgp1_reg: ldo-vgp1 { + regulator-name = "ldo_vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vgp2_reg: ldo-vgp2 { + regulator-name = "ldo_vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vcn18_reg: ldo-vcn18 { + regulator-name = "ldo_vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vcamaf_reg: ldo-vcamaf { + regulator-name = "ldo_vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vm_reg: ldo-vm { + regulator-name = "ldo_vm"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1390000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vio18_reg: ldo-vio18 { + regulator-name = "ldo_vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcamd_reg: ldo-vcamd { + regulator-name = "ldo_vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vcamio_reg: ldo-vcamio { + regulator-name = "ldo_vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vm25_reg: ldo-vm25 { + regulator-name = "ldo_vm25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vefuse_reg: ldo-vefuse { + regulator-name = "ldo_vefuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-enable-ramp-delay = <264>; + }; + }; + };
Signature · 1 line
2.20.1
PATCH v4 2/7 dt-bindings: mfd: mt6397: Add bindings for MT6392 PMIC
In reply to Fabien ParentAdd the currently supported bindings for the MT6392 PMIC.
---
V4:
* No change
V3:
* No change
V2:
* New patch
--- Documentation/devicetree/bindings/mfd/mt6397.txt | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/mfd/mt6397.txt +10 -2
@@ -17,7 +17,10 @@ Documentation/devicetree/bindings/soc/mediatek/pwrap.txt This document describes the binding for MFD device and its sub module. Required properties: -compatible: "mediatek,mt6397" or "mediatek,mt6323" +compatible: Should be one of: + - "mediatek,mt6397" + - "mediatek,mt6392" + - "mediatek,mt6323" Optional subnodes:
@@ -28,6 +31,8 @@ Optional subnodes: Required properties: - compatible: "mediatek,mt6397-regulator" see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt + - compatible: "mediatek,mt6392-regulator" + see Documentation/devicetree/bindings/regulator/mt6392-regulator.txt - compatible: "mediatek,mt6323-regulator" see Documentation/devicetree/bindings/regulator/mt6323-regulator.txt - codec
@@ -43,7 +48,10 @@ Optional subnodes: - keys Required properties: - - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" + - compatible: Should be one of: + - "mediatek,mt6397-keys" + - "mediatek,mt6392-keys" + - "mediatek,mt6323-keys" see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt Example:
Signature · 1 line
2.20.1
PATCH v4 3/7 dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition
In reply to Fabien ParentAdd the binding documentation of the mtk-pmic-keys for the MT6392 PMICs.
---
v4:
* Patch was previously sent separately but merge to this patch series since there is a hard dependency on the MFD patch.
--- .../devicetree/bindings/input/mtk-pmic-keys.txt | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/input/mtk-pmic-keys.txt +7 -4
@@ -1,15 +1,18 @@ -MediaTek MT6397/MT6323 PMIC Keys Device Driver +MediaTek MT6397/MT6392/MT6323 PMIC Keys Device Driver -There are two key functions provided by MT6397/MT6323 PMIC, pwrkey +There are two key functions provided by MT6397/MT6392/MT6323 PMIC, pwrkey and homekey. The key functions are defined as the subnode of the function node provided by MT6397/MT6323 PMIC that is being defined as one kind of Muti-Function Device (MFD) -For MT6397/MT6323 MFD bindings see: +For MT6397/MT6392/MT6323 MFD bindings see: Documentation/devicetree/bindings/mfd/mt6397.txt Required properties: -- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" +- compatible: Should be one of: + - "mediatek,mt6397-keys" + - "mediatek,mt6392-keys" + - "mediatek,mt6323-keys" - linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt Optional Properties:
Signature · 1 line
2.20.1
PATCH v4 4/7 mfd: mt6397: Add support for MT6392 pmic
In reply to Fabien ParentUpdate the MT6397 MFD driver to support the MT6392 PMIC.
---
V4:
* Use DEFINE_RES_* macro to define RTC ressources.
* Use PLATFORM_DEVID_NONE instead of -1 value when registering devices.
V3:
* No change
V2:
* Pass IRQ comain to fix invalid MFD devices IRQs.
* Remove resources and mfd cells for device we don't support.
* Rename IRQ names to follow what's done for MT6397.
--- drivers/mfd/mt6397-core.c | 47 +++ include/linux/mfd/mt6392/core.h | 42 +++ include/linux/mfd/mt6392/registers.h | 487 +++++++++++++++++++++++++++ 3 files changed, 576 insertions(+) create mode 100644 include/linux/mfd/mt6392/core.h create mode 100644 include/linux/mfd/mt6392/registers.h
drivers/mfd/mt6397-core.c +47 -0
@@ -10,17 +10,27 @@#include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/mfd/core.h> +#include <linux/mfd/mt6392/core.h> #include <linux/mfd/mt6397/core.h> #include <linux/mfd/mt6323/core.h> +#include <linux/mfd/mt6392/registers.h> #include <linux/mfd/mt6397/registers.h> #include <linux/mfd/mt6323/registers.h> +#define MT6392_RTC_BASE 0x8000 +#define MT6392_RTC_SIZE 0x3e#define MT6397_RTC_BASE 0xe000#define MT6397_RTC_SIZE 0x3e#define MT6323_CID_CODE 0x23#define MT6391_CID_CODE 0x91#define MT6397_CID_CODE 0x97 +#define MT6392_CID_CODE 0x92 + +static const struct resource mt6392_rtc_resources[] = { +DEFINE_RES_MEM (MT6392_RTC_BASE ,MT6392_RTC_SIZE ), +DEFINE_RES_IRQ (MT6392_IRQ_RTC ), +};static const struct resource mt6397_rtc_resources[] = {DEFINE_RES_MEM (MT6397_RTC_BASE ,MT6397_RTC_SIZE ),
@@ -32,11 +42,33 @@ static const struct resource mt6323_keys_resources[] = { DEFINE_RES_IRQ(MT6323_IRQ_STATUS_FCHRKEY), }; +static const struct resource mt6392_keys_resources[] = { +DEFINE_RES_IRQ (MT6392_IRQ_PWRKEY ), +DEFINE_RES_IRQ (MT6392_IRQ_FCHRKEY ), +}; +static const struct resource mt6397_keys_resources[] = {DEFINE_RES_IRQ (MT6397_IRQ_PWRKEY ),DEFINE_RES_IRQ (MT6397_IRQ_HOMEKEY ), }; +static const struct mfd_cell mt6392_devs[] = { + { + .name ="mt6392-regulator" , + .of_compatible ="mediatek,mt6392-regulator" , + }, { + .name ="mt6397-rtc" , + .num_resources =ARRAY_SIZE (mt6392_rtc_resources), + .resources = mt6392_rtc_resources, + .of_compatible ="mediatek,mt6392-rtc" , + }, { + .name ="mtk-pmic-keys" , + .num_resources =ARRAY_SIZE (mt6392_keys_resources), + .resources = mt6392_keys_resources, + .of_compatible ="mediatek,mt6392-keys" + }, +}; +static const struct mfd_cell mt6323_devs[] = { { .name ="mt6323-regulator" ,
@@ -311,6 +343,20 @@ static int mt6397_probe(struct platform_device *pdev) NULL, 0, pmic->irq_domain);break ; +case MT6392_CID_CODE : + pmic->int_con[0 ] =MT6392_INT_CON0 ; + pmic->int_con[1 ] =MT6392_INT_CON1 ; + pmic->int_status[0 ] =MT6392_INT_STATUS0 ; + pmic->int_status[1 ] =MT6392_INT_STATUS1 ; + ret =mt6397_irq_init (pmic); +if (ret) +return ret; + + ret =devm_mfd_add_devices (&pdev->dev,PLATFORM_DEVID_NONE , + mt6392_devs,ARRAY_SIZE (mt6392_devs), +NULL ,0 , pmic->irq_domain); +break ; +default :dev_err (&pdev->dev,"unsupported chip: %d\n" , id);return -ENODEV ;
@@ -327,6 +373,7 @@ static int mt6397_probe(struct platform_device *pdev)static const struct of_device_id mt6397_of_match[] = { { .compatible ="mediatek,mt6397" }, { .compatible ="mediatek,mt6323" }, + { .compatible ="mediatek,mt6392" }, { } };MODULE_DEVICE_TABLE (of, mt6397_of_match);
include/linux/mfd/mt6392/core.h new file +42 -0
42 lines not on this page · raw message
include/linux/mfd/mt6392/registers.h new file +487 -0
487 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v4 5/7 regulator: mt6392: Add support for MT6392 regulator
In reply to Fabien ParentThe MT6392 is a regulator found on boards based on the MediaTek MT8167, MT8516, and probably other SoCs. It is a so called PMIC and connectcts as a slave to a SoC using SPI, wrapped inside PWRAP.
---
V4:
* No change
V3:
* fix regulator's of_match following the renaming of the of nodes.
V2:
* no changes
--- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6392-regulator.c | 490 +++++++++++++++++++++ include/linux/regulator/mt6392-regulator.h | 40 ++ 4 files changed, 540 insertions(+) create mode 100644 drivers/regulator/mt6392-regulator.c create mode 100644 include/linux/regulator/mt6392-regulator.h
drivers/regulator/Kconfig +9 -0
@@ -626,6 +626,15 @@ config REGULATOR_MT6380 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6392 + tristate "MediaTek MT6392 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6392 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397
drivers/regulator/Makefile +1 -0
@@ -80,6 +80,7 @@ obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o +obj-$(CONFIG_REGULATOR_MT6392) += mt6392-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
drivers/regulator/mt6392-regulator.c new file +490 -0
490 lines not on this page · raw message
include/linux/regulator/mt6392-regulator.h new file +40 -0
@@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2019 MediaTek Inc. +* Author: Chen Zhong <[email protected]> +*/ + +#ifndef __LINUX_REGULATOR_MT6392_H +#define __LINUX_REGULATOR_MT6392_H + +enum { +MT6392_ID_VPROC =0 , +MT6392_ID_VSYS , +MT6392_ID_VCORE , +MT6392_ID_VXO22 , +MT6392_ID_VAUD22 , +MT6392_ID_VCAMA , +MT6392_ID_VAUD28 , +MT6392_ID_VADC18 , +MT6392_ID_VCN35 , +MT6392_ID_VIO28 , +MT6392_ID_VUSB =10 , +MT6392_ID_VMC , +MT6392_ID_VMCH , +MT6392_ID_VEMC3V3 , +MT6392_ID_VGP1 , +MT6392_ID_VGP2 , +MT6392_ID_VCN18 , +MT6392_ID_VCAMAF , +MT6392_ID_VM , +MT6392_ID_VIO18 , +MT6392_ID_VCAMD , +MT6392_ID_VCAMIO , +MT6392_ID_VM25 , +MT6392_ID_VEFUSE , +MT6392_ID_RG_MAX , +}; + +#define MT6392_MAX_REGULATOR MT6392_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6392_H */
Signature · 1 line
2.20.1
Mark Brown
maintainerRe: [PATCH v4 5/7] regulator: mt6392: Add support for MT6392 regulator
Quoted 3 lines · Fabien Parent
connectcts as a slave to a SoC using SPI, wrapped inside PWRAP.
Signed-off-by Fabien Parent <[email protected]>
This has your signoff...
drivers/regulator/mt6392-regulator.c line 5
Quoted 7 lines
+++
b/drivers/regulator/mt6392-regulator.cdrivers/regulator/mt6392-regulator.c new file +5
-0@@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2019 MediaTek Inc. +* Author: Chen Zhong <[email protected]> +*/
...but someone else from a different company wrote it? Also please make the entire header a C++ one so this looks more consistent.
drivers/regulator/mt6392-regulator.c line 125
Quoted 3 lines
drivers/regulator/mt6392-regulator.c new file +3
-0+static const u32 ldo_volt_table2[] = { +3300000 ,3400000 ,3500000 ,3600000 , +};
This looks like a linear range?
Quoted 4 lines
drivers/regulator/mt6392-regulator.c new file +4
-0+static int mt6392_get_status (struct regulator_dev *rdev) +{ +int ret; +u32 regval;
drivers/regulator/mt6392-regulator.c line 164
Quoted 10 lines
drivers/regulator/mt6392-regulator.c new file +10
-0+struct mt6392_regulator_info *info =rdev_get_drvdata (rdev); + + ret =regmap_read (rdev->regmap, info->desc.enable_reg, ®val); +if (ret !=0 ) { +dev_err (&rdev->dev,"Failed to get enable reg: %d\n" , ret); +return ret; + } + +return (regval & info->qi) ?REGULATOR_STATUS_ON :REGULATOR_STATUS_OFF ; +}
This appears to just be reading back the enable bit, the status operation should only be implemented if it can check if the regulator is actually working.
Please also don't use the ternery operator needlessly, just write normal conditional statements to help people read the code.
drivers/regulator/mt6392-regulator.c line 176
Quoted 11 lines
drivers/regulator/mt6392-regulator.c new file +11
-0+static int mt6392_buck_set_mode (struct regulator_dev *rdev,unsigned int mode) +{ +int ret, val =0 ; +struct mt6392_regulator_info *info =rdev_get_drvdata (rdev); +u32 reg_value; + +if (!info->modeset_mask) { +dev_err (&rdev->dev,"regulator %s doesn't support set_mode\n" , + info->desc.name); +return -EINVAL ; + }
If a regulator doesn't have support for set_mode() the operation shouldn't be provided for it.
drivers/regulator/mt6392-regulator.c line 197
Quoted 7 lines
drivers/regulator/mt6392-regulator.c new file +7
-0+ ret =regmap_update_bits (rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + +if (regmap_read (rdev->regmap, info->modeset_reg, ®_value) <0 ) { +dev_err (&rdev->dev,"Failed to read register value\n" ); +return -EIO ; + }
Why are we doing this read? It's not like anything even looks at the value.
Quoted 5 lines
drivers/regulator/mt6392-regulator.c new file +5
-0+static int mt6392_set_buck_vosel_reg (struct platform_device *pdev) +{ +struct mt6397_chip *mt6392 =dev_get_drvdata (pdev->dev.parent); +int i; +u32 regval;
drivers/regulator/mt6392-regulator.c line 408
Quoted 10 lines
drivers/regulator/mt6392-regulator.c new file +10
-0+ +for (i =0 ; i <MT6392_MAX_REGULATOR ; i++) { +if (mt6392_regulators[i].vselctrl_reg) { +if (regmap_read (mt6392->regmap, + mt6392_regulators[i].vselctrl_reg, + ®val) <0 ) { +dev_err (&pdev->dev, +"Failed to read buck ctrl\n" ); +return -EIO ; + }
The indentation here is seriously messed up, parts of the conditional statement are indented as far as the code block inside the conditional statement - usually the continuation of the condition would align with the (.
drivers/regulator/mt6392-regulator.c line 413
Quoted 5 lines
drivers/regulator/mt6392-regulator.c new file +5
-0+ +if (regval & mt6392_regulators[i].vselctrl_mask) { + mt6392_regulators[i].desc.vsel_reg = + mt6392_regulators[i].vselon_reg; + }
Again here the indentation is weird, this is actually one statement in the { } but the second line isn't indented.
I'm also not altogether clear why this function is doing what it's doing, some comments or something would be good at least.
drivers/regulator/mt6392-regulator.c line 459
Quoted 7 lines
drivers/regulator/mt6392-regulator.c new file +7
-0+/* Constrain board-specific capabilities according to what +* this driver and the chip itself can actually do. +*/ + c = rdev->constraints; + c->valid_modes_mask |=REGULATOR_MODE_NORMAL | +REGULATOR_MODE_STANDBY |REGULATOR_MODE_FAST ; + c->valid_ops_mask |=REGULATOR_CHANGE_MODE ;
This is broken, the driver should absolutely not modify constraints. The driver isn't even doing what the comment says here, it's enabling permissions regardless of if they were enabled by the machine.
drivers/regulator/mt6392-regulator.c line 475
Quoted 5 lines
drivers/regulator/mt6392-regulator.c new file +5
-0+static const struct of_device_id mt6392_of_match[] = { + { .compatible ="mediatek,mt6392-regulator" , }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, mt6392_of_match);
There is no need for a compatible for this subfunction, it's specific to a single chip so we should be able to enumerate it just by enumerating that chip and this way of binding regulators is very Linux specific. Just have the MFD register the regulator device.
PATCH v4 6/7 input: keyboard: mtk-pmic-keys: add MT6392 support
In reply to Fabien ParentAdd support for MT6392 PMIC's keys.
---
V4:
* Patch was previously sent separately but merge to this patch series since there is a hard dependency on the MFD patch.
--- drivers/input/keyboard/mtk-pmic-keys.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/input/keyboard/mtk-pmic-keys.c +14 -0
@@ -9,6 +9,7 @@#include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/mt6323/registers.h> +#include <linux/mfd/mt6392/registers.h> #include <linux/mfd/mt6397/core.h> #include <linux/mfd/mt6397/registers.h> #include <linux/module.h>
@@ -74,6 +75,16 @@ static const struct mtk_pmic_regs mt6323_regs = { .pmic_rst_reg = MT6323_TOP_RST_MISC, }; +static const struct mtk_pmic_regs mt6392_regs = { + .keys_regs[MTK_PMIC_PWRKEY_INDEX ] = +MTK_PMIC_KEYS_REGS (MT6392_CHRSTATUS , +0x2 ,MT6392_INT_MISC_CON ,0x10 ), + .keys_regs[MTK_PMIC_HOMEKEY_INDEX ] = +MTK_PMIC_KEYS_REGS (MT6392_CHRSTATUS , +0x4 ,MT6392_INT_MISC_CON ,0x8 ), + .pmic_rst_reg =MT6392_TOP_RST_MISC , +}; +struct mtk_pmic_keys_info {struct mtk_pmic_keys *keys;const struct mtk_pmic_keys_regs *regs;
@@ -229,6 +240,9 @@ static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = { }, { .compatible = "mediatek,mt6323-keys", .data = &mt6323_regs, + }, { + .compatible = "mediatek,mt6392-keys", + .data = &mt6392_regs, }, { /* sentinel */ }
Signature · 1 line
2.20.1
PATCH v4 7/7 arm64: dts: mt6392: Add PMIC mt6392 dtsi
In reply to Fabien ParentAdd the regulator nodes for the MT6392 PMIC.
---
V4:
* No change
V3:
* No change
V2:
* Use 'pmic' as node name for the pmic.
* Use 'regulators' as node name for the regulators
* use dash instead of underscore for regulator's node names.
--- arch/arm64/boot/dts/mediatek/mt6392.dtsi | 208 +++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt6392.dtsi
arch/arm64/boot/dts/mediatek/mt6392.dtsi new file +208 -0
@@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + */ + +&pwrap { + mt6392_pmic: pmic { + compatible = "mediatek,mt6392", "mediatek,mt6323"; + mediatek,system-power-controller; + + regulators { + compatible = "mediatek,mt6392-regulator"; + + mt6392_vproc_reg: buck-vproc { + regulator-name = "buck_vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vsys_reg: buck-vsys { + regulator-name = "buck_vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcore_reg: buck-vcore { + regulator-name = "buck_vcore"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vxo22_reg: ldo-vxo22 { + regulator-name = "ldo_vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vaud22_reg: ldo-vaud22 { + regulator-name = "ldo_vaud22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcama_reg: ldo-vcama { + regulator-name = "ldo_vcama"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vaud28_reg: ldo-vaud28 { + regulator-name = "ldo_vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vadc18_reg: ldo-vadc18 { + regulator-name = "ldo_vadc18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcn35_reg: ldo-vcn35 { + regulator-name = "ldo_vcn35"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vio28_reg: ldo-vio28 { + regulator-name = "ldo_vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vusb_reg: ldo-vusb { + regulator-name = "ldo_vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vmc_reg: ldo-vmc { + regulator-name = "ldo_vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-boot-on; + }; + + mt6392_vmch_reg: ldo-vmch { + regulator-name = "ldo_vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-boot-on; + }; + + mt6392_vemc3v3_reg: ldo-vemc3v3 { + regulator-name = "ldo_vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + regulator-boot-on; + }; + + mt6392_vgp1_reg: ldo-vgp1 { + regulator-name = "ldo_vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vgp2_reg: ldo-vgp2 { + regulator-name = "ldo_vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vcn18_reg: ldo-vcn18 { + regulator-name = "ldo_vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vcamaf_reg: ldo-vcamaf { + regulator-name = "ldo_vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vm_reg: ldo-vm { + regulator-name = "ldo_vm"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1390000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vio18_reg: ldo-vio18 { + regulator-name = "ldo_vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + regulator-boot-on; + }; + + mt6392_vcamd_reg: ldo-vcamd { + regulator-name = "ldo_vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vcamio_reg: ldo-vcamio { + regulator-name = "ldo_vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vm25_reg: ldo-vm25 { + regulator-name = "ldo_vm25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6392_vefuse_reg: ldo-vefuse { + regulator-name = "ldo_vefuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-enable-ramp-delay = <264>; + }; + }; + }; +};
Signature · 1 line
2.20.1