Skip to contentSkip to conversation

python-lxml: replace -Og with -O for mips64-32

PATCH In review [email protected] 2 participants 2 messages Jun 20, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 python-lxml: replace -Og with -O for mips64-32

From: Mingli Yu <[email protected]>

With below logic in local.conf:
MACHINE ??= "qemumips64" MULTILIB_GLOBAL_VARIANTS_append = " libn32" MULTILIBS ?= "multilib:lib32 multilib:libn32" DEFAULTTUNE_virtclass-multilib-lib32 ?= "mips" DEFAULTTUNE_virtclass-multilib-libn32 ?= "mips64-n32" require conf/multilib.conf
DEBUG_BUILD = "1"

$ bitbake lib32-python-lxml
[snip]
| {standard input}: Assembler messages:
| {standard input}:1488805: Error: branch out of range
| Compile failed: command 'mips-pokymllib32-linux-gcc' failed with exit status 1
| creating tmp
| cc -I/yocto/builds//tmp/work/mips-pokymllib32-linux/lib32-python-lxml/4.3.4-r0/lib32-recipe-sysroot/usr/include/libxml2 -I/usr/include/libxml2 -c /tmp/xmlXPathInitPZiWuM.c -o tmp/xmlXPathInitPZiWuM.o
| unable to execute 'cc': No such file or directory
[snip]

When DEBUG_BUILD enabled, -Og pass to compiler, replace -Og with -O to fix the above compile error.

---
 meta-python/recipes-devtools/python/python-lxml.inc | 12 ++++++++++++
 1 file changed, 12 insertions(+)
meta-python/recipes-devtools/python/python-lxml.inc +12 -0
index d67c17883..dd73a412b 100644
@@ -33,6 +33,18 @@ DISTUTILS_INSTALL_ARGS += " \
 
 inherit pypi
 
+# {standard input}: Assembler messages:
+# {standard input}:1488805: Error: branch out of range
+DEBUG_OPTIMIZATION_remove_mips = " -Og"
+DEBUG_OPTIMIZATION_append_mips = " -O"
+BUILD_OPTIMIZATION_remove_mips = " -Og"
+BUILD_OPTIMIZATION_append_mips = " -O"
+
+DEBUG_OPTIMIZATION_remove_mipsel = " -Og"
+DEBUG_OPTIMIZATION_append_mipsel = " -O"
+BUILD_OPTIMIZATION_remove_mipsel = " -Og"
+BUILD_OPTIMIZATION_append_mipsel = " -O"
+
 do_configure_prepend() {
     sed -i -e 's/--version/--modversion/' ${B}/setupinfo.py
 }
Signature · 1 line
2.21.0
#1 lore raw
Quoted 39 lines · On Wed, Jun 19, 2019 at 11:50 PM <[email protected]> wrote:

From: Mingli Yu <[email protected]>

With below logic in local.conf:
MACHINE ??= "qemumips64" MULTILIB_GLOBAL_VARIANTS_append = " libn32" MULTILIBS ?= "multilib:lib32 multilib:libn32" DEFAULTTUNE_virtclass-multilib-lib32 ?= "mips" DEFAULTTUNE_virtclass-multilib-libn32 ?= "mips64-n32" require conf/multilib.conf
DEBUG_BUILD = "1"

$ bitbake lib32-python-lxml
[snip]
| {standard input}: Assembler messages:
| {standard input}:1488805: Error: branch out of range
| Compile failed: command 'mips-pokymllib32-linux-gcc' failed with exit status 1
| creating tmp
| cc -I/yocto/builds//tmp/work/mips-pokymllib32-linux/lib32-python-lxml/4.3.4-r0/lib32-recipe-sysroot/usr/include/libxml2 -I/usr/include/libxml2 -c /tmp/xmlXPathInitPZiWuM.c -o tmp/xmlXPathInitPZiWuM.o
| unable to execute 'cc': No such file or directory
[snip]

When DEBUG_BUILD enabled, -Og pass to compiler, replace -Og with -O to fix the above compile error.

---
 meta-python/recipes-devtools/python/python-lxml.inc | 12 ++++++++++++
 1 file changed, 12 insertions(+)
meta-python/recipes-devtools/python/python-lxml.inc +2 -0
index d67c17883..dd73a412b 100644
@@ -33,6 +33,18 @@ DISTUTILS_INSTALL_ARGS += " \
 
 inherit pypi
 
+# {standard input}: Assembler messages:
+# {standard input}:1488805: Error: branch out of range

meta-python/recipes-devtools/python/python-lxml.inc DISTUTILS_INSTALL_ARGS += " \ · line 47

Quoted 10 lines
meta-python/recipes-devtools/python/python-lxml.inc +10 -0
+DEBUG_OPTIMIZATION_remove_mips = " -Og"
+DEBUG_OPTIMIZATION_append_mips = " -O"
+BUILD_OPTIMIZATION_remove_mips = " -Og"
+BUILD_OPTIMIZATION_append_mips = " -O"
+
+DEBUG_OPTIMIZATION_remove_mipsel = " -Og"
+DEBUG_OPTIMIZATION_append_mipsel = " -O"
+BUILD_OPTIMIZATION_remove_mipsel = " -Og"
+BUILD_OPTIMIZATION_append_mipsel = " -O"
+

this is a workaround and probably ok in meanwhile. However can you generaste a preprocessed file
where it breaks the assembly. So we can report it upstream

Quoted 6 lines
meta-python/recipes-devtools/python/python-lxml.inc +0 -1
 do_configure_prepend() {
     sed -i -e 's/--version/--modversion/' ${B}/setupinfo.py
 }
--

2.21.0