arm64: dts: rockchip: Add support for SkyKirin X99 TV Box
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Add support for SkyKirin X99 TV Box
Add devicetree support for SkyKirin X99 TV Box based on RK3999
Following peripherals tested and work:
Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BT
Not tested:
- Type-C port
- OPTICAL
- IR
--- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-skykirinx-99.dts | 748 ++++++++++++++++++ 3 files changed, 903 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-skykirinx-99.dts
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
@@ -446,6 +446,11 @@ properties: - const: rockchip,rv1108-evb - const: rockchip,rv1108 + - description: SkyKirin RK3399 TV Box + items: + - const: rockchip,rk3399-skykirin-x99 + - const: rockchip,rk3399 + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard items: - const: tsd,rk3368-uq7-haikou
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-skykirin-x99.dtb
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +748 -0
748 lines not on this page · raw message
Signature · 1 line
2.17.1
Heiko Stuebner
maintainerHi Vivek,
Am Dienstag, 18. Juni 2019, 07:10:25 CEST schrieb Vivek Unune:
Quoted 31 lines
Add devicetree support for SkyKirin X99 TV Box based on RK3999
Following peripherals tested and work:
Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BTNot tested:
- Type-C port
- OPTICAL
- IRSigned-off-by Vivek Unune <[email protected]>--- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-skykirinx-99.dts | 748 ++++++++++++++++++ 3 files changed, 903 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-skykirinx-99.dtsDocumentation/devicetree/bindings/arm/rockchip.yaml +0
-0
Documentation/devicetree/bindings/arm/rockchip.yaml properties: · line 451
Quoted 6 lines
Documentation/devicetree/bindings/arm/rockchip.yaml +3
-0@@ -446,6 +446,11 @@ properties: - const: rockchip,rv1108-evb - const: rockchip,rv1108 + - description: SkyKirin RK3399 TV Box + items: + - const: rockchip,rk3399-skykirin-x99
const: skykirin,x99
plus in a separate patch adding a skykirin entry to the vendor-prefixes.yaml
Quoted 20 lines
Documentation/devicetree/bindings/arm/rockchip.yaml +2
-0+ - const: rockchip,rk3399 + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard items: - const: tsd,rk3368-uq7-haikouarch/arm64/boot/dts/rockchip/Makefile +1
-0@@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-skykirin-x99.dtbarch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +0
-0
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 10
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +10
-0@@ -0,0 +1,748 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "SkyKirin X99 TV BOX"; + compatible = "rockchip,rk3399-skykirin-x99", "rockchip,rk3399";
same as above
compatible = "skykirin,x99", "rockchip,rk3399";
Quoted 88 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +88
-0+ + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_5v: dc-5v { + compatible = "regulator-fixed"; + regulator-name = "dc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_5v>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>;
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 108
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +10
-0+ pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + + /* for rockchip boot on */ + rockchip,pwm_id= <2>; + rockchip,pwm_voltage = <900000>;
These bindings are specific to the vendor kernel and not part of the mainline kernel, so please remove
Quoted 52 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +52
-0+ }; + + leds { + compatible = "gpio-leds"; + + power-led { + gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "power"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&i2c0 { + status = "okay";
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 170
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +10
-0+ i2c-scl-rising-time-ns = <180>; + i2c-scl-falling-time-ns = <30>; + clock-frequency = <400000>; + + vdd_cpu_b: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel1_gpio>; + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
not part of the binding
Quoted 9 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +9
-0+ regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem {
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 189
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +10
-0+ regulator-off-in-suspend; + }; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel2_gpio>; + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
same as above
Quoted 276 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +276
-0+ regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-initial-mode = <1>; /* 1:force PWM 2:auto */ + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rtc_clko_wifi"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <40>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_gpu>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound {
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 475
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +10
-0+ status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ + audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ + sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ + gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
drop the comments please
Quoted 93 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +93
-0+}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pinctrl { + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gmac { + rgmii_sleep_pins: rgmii-sleep-pins { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + /* external pullup to VCC1V8_PMUPLL */ + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_reg_on_h: wifi-reg_on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; + pinctrl-0 = <&pwm2_pin_pull_down>; +}; + +&saradc { + vref-supply = <&vcc1v8_s0>; + status = "okay"; +};
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 578
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +10
-0+ +&sdmmc { + clock-frequency = <150000000>; + clock-freq-min-max = <200000 150000000>; + supports-sd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + num-slots = <1>;
drop num-slots
Thanks
Heiko
Quoted 12 lines · Heiko Stuebner
Hi Vivek,
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts line 578
Quoted 2 lines
arch/arm64/boot/dts/rockchip/rk3399-skykirin-x99.dts new file +2
-0+ disable-wp; + num-slots = <1>;drop num-slots
Thanks
Heiko
Thanks feedback Heiko, I'll revert with updated patch as suggested.
PATCH v2 1/1 arm64: dts: rockchip: Add support for Hugsun X99 TV Box
In reply to Heiko StuebnerAdd devicetree support for Hugsun X99 TV Box based on RK3399 SoC
Tested with LibreElec running kernel v5.1.2.
Following peripherals tested and work:
Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BT
Not tested:
- Type-C port
- OPTICAL
- IR
---
Changes in v2:
- Correct manufacturer is Shenzhen Hugsun Technology Co. Ltd.
- Added vendor prefixes
- Removed vendor specific devicee tree bindings
- Removed comments
--- .../devicetree/bindings/arm/rockchip.yaml | 5 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-hugsun-x99.dts | 736 ++++++++++++++++++ 4 files changed, 744 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
@@ -316,6 +316,11 @@ properties: - const: haoyu,marsboard-rk3066 - const: rockchip,rk3066a + - description: Hugsun X99 TV Box + items: + - const: hugsun,x99 + - const: rockchip,rk3399 + - description: mqmaker MiQi items: - const: mqmaker,miqi
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -373,6 +373,8 @@ patternProperties: description: Honeywell "^hp,.*": description: Hewlett Packard + "^hugsun,.*": + description: Shenzhen Hugsun Technology Co. Ltd. "^holtek,.*": description: Holtek Semiconductor, Inc. "^hwacom,.*":
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts new file +736 -0
736 lines not on this page · raw message
Signature · 1 line
2.17.1
Heiko Stuebner
maintainerRe: [PATCH v2] arm64: dts: rockchip: Add support for Hugsun X99 TV Box
Am Freitag, 21. Juni 2019, 22:53:08 CEST schrieb Vivek Unune:
Quoted 15 lines
Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC
Tested with LibreElec running kernel v5.1.2.
Following peripherals tested and work:Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BT
Quoted 6 lines
Not tested:
- Type-C port
- OPTICAL
- IRSigned-off-by Vivek Unune <[email protected]>
applied for 5.3 after doing some reordering to make things alphabetical.
Heiko
Re: [PATCH v2] arm64: dts: rockchip: Add support for Hugsun X99 TV Box
Quoted 21 lines · Heiko Stuebner
Am Freitag, 21. Juni 2019, 22:53:08 CEST schrieb Vivek Unune:
Quoted 20 lines
Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC
Tested with LibreElec running kernel v5.1.2.
Following peripherals tested and work:Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BTNot tested:
- Type-C port
- OPTICAL
- IR
Quoted 8 lines
Quoted 1 line
Signed-off-by Vivek Unune <[email protected]>applied for 5.3 after doing some reordering to make things alphabetical.
Heiko
Thanks Heiko!