Skip to contentSkip to conversation

Add imx7ulp USBOTG1 support

PATCH Applied Peter Chen 3 participants 13 messages Jun 24, 2019 – Jul 2, 2019

Subsystems (5)
lore
Share & tools
lore

Peter Chen

author
#0 lore raw

v5 cover Add imx7ulp USBOTG1 support

Changes for v5:
- Change DT node name from 'usbphy' to usb-phy'. [Patch 1/8, 6/8]

Changes for v4:
- Delete the oldest compatible for usbotg1, usbmisc and usbphy. [Patch 6/8]

Changes for v3:
- Using readl_poll_timeout to replace private function. [Patch 2/8]
- Add more commit log for new flag CI_HDRC_PMQOS. [Patch 5/8]
- Move 'compatible' at the beginning of propeties. [Patch 6/8]

Changes for v2:
- Use common 'phys' property [Patch 6/8]
- Add the last patch that "fsl,usbphy" phandle is not mandatory now [Patch 8/8]
- Add Reviewed-by from Rob.

There is a dual-role USB controller at imx7ulp, we add support for it in this patch set, and the dual-role function is tested at imx7ulp-evk board.

Thanks.

Peter Chen (8):
doc: dt-binding: mxs-usb-phy: add compatible for 7ulp
usb: phy: phy-mxs-usb: add imx7ulp support
doc: dt-binding: ci-hdrc-usb2: add compatible string for imx7ulp
doc: dt-binding: usbmisc-imx: add compatible string for imx7ulp
usb: chipidea: imx: add imx7ulp support
ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
ARM: dts: imx7ulp-evk: enable USBOTG1 support
usb: chipidea: imx: "fsl,usbphy" phandle is not mandatory now

 .../devicetree/bindings/phy/mxs-usb-phy.txt        |  3 +-
 .../devicetree/bindings/usb/ci-hdrc-usb2.txt       |  1 +
 .../devicetree/bindings/usb/usbmisc-imx.txt        |  1 +
 arch/arm/boot/dts/imx7ulp-evk.dts                  | 35 +++++++++++
 arch/arm/boot/dts/imx7ulp.dtsi                     | 28 +++++++++
 drivers/usb/chipidea/ci_hdrc_imx.c                 | 33 ++++++++++-
 drivers/usb/chipidea/usbmisc_imx.c                 |  4 ++
 drivers/usb/phy/phy-mxs-usb.c                      | 67 +++++++++++++++++++++-
 include/linux/usb/chipidea.h                       |  1 +
 9 files changed, 168 insertions(+), 5 deletions(-)
Signature · 1 line
2.14.1
author
#1 lore raw

PATCH v5 1/8 doc: dt-binding: mxs-usb-phy: add compatible for 7ulp

Add compatible for 7ulp USB PHY.

---
 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +2 -1
index 6ac98b3b5f57..c9f5c0caf8a9 100644
@@ -7,6 +7,7 @@ Required properties:
 	* "fsl,imx6sl-usbphy" for imx6sl
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
+	* "fsl,imx7ulp-usbphy" for imx7ulp
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
@@ -23,7 +24,7 @@ Optional properties:
   the 17.78mA TX reference current. Default: 100
 
 Example:
-usbphy1: usbphy@20c9000 {
+usbphy1: usb-phy@20c9000 {
 	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 	reg = <0x020c9000 0x1000>;
 	interrupts = <0 44 0x04>;
Signature · 1 line
2.14.1
author
#2 lore raw

PATCH v5 2/8 usb: phy: phy-mxs-usb: add imx7ulp support

In reply to Peter Chen

At imx7ulp, the USB related analog register is located in PHY register region too, so we need to control PLL at PHY driver directly.

---
 drivers/usb/phy/phy-mxs-usb.c | 67 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)
drivers/usb/phy/phy-mxs-usb.c +66 -1
index 6fa16ab31e2e..70b8c8248caf 100644
@@ -17,9 +17,11 @@
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/iopoll.h>
 
 #define DRIVER_NAME "mxs_phy"
 
+/* Register Macro */
 #define HW_USBPHY_PWD				0x00
 #define HW_USBPHY_TX				0x10
 #define HW_USBPHY_CTRL				0x30
@@ -37,6 +39,11 @@
 #define GM_USBPHY_TX_TXCAL45DN(x)            (((x) & 0xf) << 8)
 #define GM_USBPHY_TX_D_CAL(x)                (((x) & 0xf) << 0)
 
+/* imx7ulp */
+#define HW_USBPHY_PLL_SIC			0xa0
+#define HW_USBPHY_PLL_SIC_SET			0xa4
+#define HW_USBPHY_PLL_SIC_CLR			0xa8
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_OTG_ID_VALUE		BIT(27)
@@ -55,6 +62,12 @@
 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
 
 #define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
+/* imx7ulp */
+#define BM_USBPHY_PLL_LOCK			BIT(31)
+#define BM_USBPHY_PLL_REG_ENABLE		BIT(21)
+#define BM_USBPHY_PLL_BYPASS			BIT(16)
+#define BM_USBPHY_PLL_POWER			BIT(12)
+#define BM_USBPHY_PLL_EN_USB_CLKS		BIT(6)
 
 /* Anatop Registers */
 #define ANADIG_ANA_MISC0			0x150
@@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = {
 	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
 };
 
+static const struct mxs_phy_data imx7ulp_phy_data = {
+};
+
 static const struct of_device_id mxs_phy_dt_ids[] = {
 	{ .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
 	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
@@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = {
 	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
 	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
 	{ .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
+	{ .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
@@ -199,6 +216,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
 	return mxs_phy->data == &imx6sl_phy_data;
 }
 
+static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx7ulp_phy_data;
+}
+
 /*
  * PHY needs some 32K cycles to switch from 32K clock to
  * bus (such as AHB/AXI, etc) clock.
@@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
 	}
 }
 
+static int mxs_phy_pll_enable(void __iomem *base, bool enable)
+{
+	int ret = 0;
+
+	if (enable) {
+		u32 value;
+
+		writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
+		writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
+		writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
+		ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
+			value, (value & BM_USBPHY_PLL_LOCK) != 0,
+			100, 10000);
+		if (ret)
+			return ret;
+
+		writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+				HW_USBPHY_PLL_SIC_SET);
+	} else {
+		writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+				HW_USBPHY_PLL_SIC_CLR);
+		writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
+		writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
+		writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
+	}
+
+	return ret;
+}
+
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
 	void __iomem *base = mxs_phy->phy.io_priv;
 
+	if (is_imx7ulp_phy(mxs_phy)) {
+		ret = mxs_phy_pll_enable(base, true);
+		if (ret)
+			return ret;
+	}
+
 	ret = stmp_reset_block(base + HW_USBPHY_CTRL);
 	if (ret)
-		return ret;
+		goto disable_pll;
 
 	/* Power up the PHY */
 	writel(0, base + HW_USBPHY_PWD);
@@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	mxs_phy_tx_init(mxs_phy);
 
 	return 0;
+
+disable_pll:
+	if (is_imx7ulp_phy(mxs_phy))
+		mxs_phy_pll_enable(base, false);
+	return ret;
 }
 
 /* Return true if the vbus is there */
@@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 	writel(BM_USBPHY_CTRL_CLKGATE,
 	       phy->io_priv + HW_USBPHY_CTRL_SET);
 
+	if (is_imx7ulp_phy(mxs_phy))
+		mxs_phy_pll_enable(phy->io_priv, false);
+
 	clk_disable_unprepare(mxs_phy->clk);
 }
 
Signature · 1 line
2.14.1
#3 lore raw

Re: [PATCH v5 2/8] usb: phy: phy-mxs-usb: add imx7ulp support

Quoted 3 lines

At imx7ulp, the USB related analog register is located in PHY register region too, so we need to control PLL at PHY driver directly.

Hi Felipe,

Would you please have a review for Patch 1 and Patch 2 in this series? Thanks.

Peter

Quoted 152 lines
---
 drivers/usb/phy/phy-mxs-usb.c | 67 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)
drivers/usb/phy/phy-mxs-usb.c +66 -2
index 6fa16ab31e2e..70b8c8248caf 100644
@@ -17,9 +17,11 @@
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/iopoll.h>
 
 #define DRIVER_NAME "mxs_phy"
 
+/* Register Macro */
 #define HW_USBPHY_PWD                          0x00
 #define HW_USBPHY_TX                           0x10
 #define HW_USBPHY_CTRL                         0x30
@@ -37,6 +39,11 @@
 #define GM_USBPHY_TX_TXCAL45DN(x)            (((x) & 0xf) << 8)
 #define GM_USBPHY_TX_D_CAL(x)                (((x) & 0xf) << 0)
 
+/* imx7ulp */
+#define HW_USBPHY_PLL_SIC                      0xa0
+#define HW_USBPHY_PLL_SIC_SET                  0xa4
+#define HW_USBPHY_PLL_SIC_CLR                  0xa8
+
 #define BM_USBPHY_CTRL_SFTRST                  BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE                 BIT(30)
 #define BM_USBPHY_CTRL_OTG_ID_VALUE            BIT(27)
@@ -55,6 +62,12 @@
 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
 
 #define BM_USBPHY_DEBUG_CLKGATE                        BIT(30)
+/* imx7ulp */
+#define BM_USBPHY_PLL_LOCK                     BIT(31)
+#define BM_USBPHY_PLL_REG_ENABLE               BIT(21)
+#define BM_USBPHY_PLL_BYPASS                   BIT(16)
+#define BM_USBPHY_PLL_POWER                    BIT(12)
+#define BM_USBPHY_PLL_EN_USB_CLKS              BIT(6)
 
 /* Anatop Registers */
 #define ANADIG_ANA_MISC0                       0x150
@@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = {
        .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
 };
 
+static const struct mxs_phy_data imx7ulp_phy_data = {
+};
+
 static const struct of_device_id mxs_phy_dt_ids[] = {
        { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
        { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
@@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = {
        { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
        { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
        { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
+       { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
        { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
@@ -199,6 +216,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
        return mxs_phy->data == &imx6sl_phy_data;
 }
 
+static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
+{
+       return mxs_phy->data == &imx7ulp_phy_data;
+}
+
 /*
  * PHY needs some 32K cycles to switch from 32K clock to
  * bus (such as AHB/AXI, etc) clock.
@@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
        }
 }
 
+static int mxs_phy_pll_enable(void __iomem *base, bool enable)
+{
+       int ret = 0;
+
+       if (enable) {
+               u32 value;
+
+               writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
+               writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
+               writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
+               ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
+                       value, (value & BM_USBPHY_PLL_LOCK) != 0,
+                       100, 10000);
+               if (ret)
+                       return ret;
+
+               writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+                               HW_USBPHY_PLL_SIC_SET);
+       } else {
+               writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+                               HW_USBPHY_PLL_SIC_CLR);
+               writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
+               writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
+               writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
+       }
+
+       return ret;
+}
+
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
        int ret;
        void __iomem *base = mxs_phy->phy.io_priv;
 
+       if (is_imx7ulp_phy(mxs_phy)) {
+               ret = mxs_phy_pll_enable(base, true);
+               if (ret)
+                       return ret;
+       }
+
        ret = stmp_reset_block(base + HW_USBPHY_CTRL);
        if (ret)
-               return ret;
+               goto disable_pll;
 
        /* Power up the PHY */
        writel(0, base + HW_USBPHY_PWD);
@@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
        mxs_phy_tx_init(mxs_phy);
 
        return 0;
+
+disable_pll:
+       if (is_imx7ulp_phy(mxs_phy))
+               mxs_phy_pll_enable(base, false);
+       return ret;
 }
 
 /* Return true if the vbus is there */
@@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
        writel(BM_USBPHY_CTRL_CLKGATE,
               phy->io_priv + HW_USBPHY_CTRL_SET);
 
+       if (is_imx7ulp_phy(mxs_phy))
+               mxs_phy_pll_enable(phy->io_priv, false);
+
        clk_disable_unprepare(mxs_phy->clk);
 }
 
--

2.14.1

author
#4 lore raw

RE: [PATCH v5 2/8] usb: phy: phy-mxs-usb: add imx7ulp support

Quoted 7 lines

Hi Felipe,

Would you please have a review for Patch 1 and Patch 2 in this series? Thanks.

Ping...

The DTS and controller patches have already queued. Thanks.

Peter

Quoted 160 lines

Peter

Quoted 78 lines
---
 drivers/usb/phy/phy-mxs-usb.c | 67
++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)
(quoted diff) +0 -0

b/drivers/usb/phy/phy-mxs-usb.c index 6fa16ab31e2e..70b8c8248caf 100644

drivers/usb/phy/phy-mxs-usb.c +15 -0
@@ -17,9 +17,11 @@
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/iopoll.h>
 
 #define DRIVER_NAME "mxs_phy"
 
+/* Register Macro */
 #define HW_USBPHY_PWD                          0x00
 #define HW_USBPHY_TX                           0x10
 #define HW_USBPHY_CTRL                         0x30
@@ -37,6 +39,11 @@
 #define GM_USBPHY_TX_TXCAL45DN(x)            (((x) & 0xf) << 8)
 #define GM_USBPHY_TX_D_CAL(x)                (((x) & 0xf) << 0)
 
+/* imx7ulp */
+#define HW_USBPHY_PLL_SIC                      0xa0
+#define HW_USBPHY_PLL_SIC_SET                  0xa4
+#define HW_USBPHY_PLL_SIC_CLR                  0xa8
+
 #define BM_USBPHY_CTRL_SFTRST                  BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE                 BIT(30)
 #define BM_USBPHY_CTRL_OTG_ID_VALUE            BIT(27)
@@ -55,6 +62,12 @@
 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
 
 #define BM_USBPHY_DEBUG_CLKGATE                        BIT(30)
+/* imx7ulp */
+#define BM_USBPHY_PLL_LOCK                     BIT(31)
+#define BM_USBPHY_PLL_REG_ENABLE               BIT(21)
+#define BM_USBPHY_PLL_BYPASS                   BIT(16)
+#define BM_USBPHY_PLL_POWER                    BIT(12)
+#define BM_USBPHY_PLL_EN_USB_CLKS              BIT(6)
 
 /* Anatop Registers */
 #define ANADIG_ANA_MISC0                       0x150
@@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = {
        .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
 };
 
+static const struct mxs_phy_data imx7ulp_phy_data = { };
+
 static const struct of_device_id mxs_phy_dt_ids[] = {
        { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
        { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data,
}, @@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = {
        { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
        { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
        { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data,
},
+       { .compatible = "fsl,imx7ulp-usbphy", .data =
+ &imx7ulp_phy_data, },
        { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); @@ -199,6 +216,11 @@ static
inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
        return mxs_phy->data == &imx6sl_phy_data;  }
drivers/usb/phy/phy-mxs-usb.c +3 -0
+static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy) {
+       return mxs_phy->data == &imx7ulp_phy_data; }
+
 /*
  * PHY needs some 32K cycles to switch from 32K clock to
  * bus (such as AHB/AXI, etc) clock.
@@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
        }

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) · line 254

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +8 -0
 }
 
+static int mxs_phy_pll_enable(void __iomem *base, bool enable)
+{
+       int ret = 0;
+
+       if (enable) {
+               u32 value;
+
+               writel(BM_USBPHY_PLL_REG_ENABLE, base +

HW_USBPHY_PLL_SIC_SET);

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) · line 255

Quoted 1 line
drivers/usb/phy/phy-mxs-usb.c +1 -0
+               writel(BM_USBPHY_PLL_BYPASS, base +

HW_USBPHY_PLL_SIC_CLR);

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) · line 256

Quoted 1 line
drivers/usb/phy/phy-mxs-usb.c +1 -0
+               writel(BM_USBPHY_PLL_POWER, base +

HW_USBPHY_PLL_SIC_SET);

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)

Quoted 12 lines
drivers/usb/phy/phy-mxs-usb.c +12 -0
+               ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
+                       value, (value & BM_USBPHY_PLL_LOCK) != 0,
+                       100, 10000);
+               if (ret)
+                       return ret;
+
+               writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+                               HW_USBPHY_PLL_SIC_SET);
+       } else {
+               writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+                               HW_USBPHY_PLL_SIC_CLR);
+               writel(BM_USBPHY_PLL_POWER, base +

HW_USBPHY_PLL_SIC_CLR);

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) · line 269

Quoted 1 line
drivers/usb/phy/phy-mxs-usb.c +1 -0
+               writel(BM_USBPHY_PLL_BYPASS, base +

HW_USBPHY_PLL_SIC_SET);

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) · line 270

Quoted 1 line
drivers/usb/phy/phy-mxs-usb.c +1 -0
+               writel(BM_USBPHY_PLL_REG_ENABLE, base +

HW_USBPHY_PLL_SIC_CLR);

Quoted 48 lines
drivers/usb/phy/phy-mxs-usb.c +20 -2
+       }
+
+       return ret;
+}
+
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
        int ret;
        void __iomem *base = mxs_phy->phy.io_priv;
 
+       if (is_imx7ulp_phy(mxs_phy)) {
+               ret = mxs_phy_pll_enable(base, true);
+               if (ret)
+                       return ret;
+       }
+
        ret = stmp_reset_block(base + HW_USBPHY_CTRL);
        if (ret)
-               return ret;
+               goto disable_pll;
 
        /* Power up the PHY */
        writel(0, base + HW_USBPHY_PWD);
@@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
        mxs_phy_tx_init(mxs_phy);
 
        return 0;
+
+disable_pll:
+       if (is_imx7ulp_phy(mxs_phy))
+               mxs_phy_pll_enable(base, false);
+       return ret;
 }
 
 /* Return true if the vbus is there */
@@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
        writel(BM_USBPHY_CTRL_CLKGATE,
               phy->io_priv + HW_USBPHY_CTRL_SET);
 
+       if (is_imx7ulp_phy(mxs_phy))
+               mxs_phy_pll_enable(phy->io_priv, false);
+
        clk_disable_unprepare(mxs_phy->clk);
 }
 
--

2.14.1

author
#5 lore raw

PATCH v5 3/8 doc: dt-binding: ci-hdrc-usb2: add compatible string for imx7ulp

In reply to Peter Chen

Add compatible string for imx7ulp.

---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +1 -0
index a254386a91ad..cfc9f40ab641 100644
@@ -10,6 +10,7 @@ Required properties:
 	"fsl,imx6sx-usb"
 	"fsl,imx6ul-usb"
 	"fsl,imx7d-usb"
+	"fsl,imx7ulp-usb"
 	"lsi,zevio-usb"
 	"qcom,ci-hdrc"
 	"chipidea,usb2"
Signature · 1 line
2.14.1
author
#6 lore raw

PATCH v5 4/8 doc: dt-binding: usbmisc-imx: add compatible string for imx7ulp

In reply to Peter Chen

Add compatible string for imx7ulp

---
 Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/usbmisc-imx.txt +1 -0
index a85a631ec434..b353b9816487 100644
@@ -7,6 +7,7 @@ Required properties:
 	"fsl,vf610-usbmisc" for Vybrid vf610
 	"fsl,imx6sx-usbmisc" for imx6sx
 	"fsl,imx7d-usbmisc" for imx7d
+	"fsl,imx7ulp-usbmisc" for imx7ulp
 - reg: Should contain registers location and length
 
 Examples:
Signature · 1 line
2.14.1
author
#7 lore raw

PATCH v5 5/8 usb: chipidea: imx: add imx7ulp support

In reply to Peter Chen

In this commit, we add CI_HDRC_PMQOS to avoid system entering idle, at imx7ulp, if the system enters idle, the DMA will stop, so the USB transfer can't work at this case.

---
 drivers/usb/chipidea/ci_hdrc_imx.c | 28 +++++++++++++++++++++++++++-
 drivers/usb/chipidea/usbmisc_imx.c |  4 ++++
 include/linux/usb/chipidea.h       |  1 +
 3 files changed, 32 insertions(+), 1 deletion(-)
drivers/usb/chipidea/ci_hdrc_imx.c +27 -1
index ceec8d5985d4..a76708501236 100644
@@ -13,6 +13,7 @@
 #include <linux/usb/of.h>
 #include <linux/clk.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_qos.h>
 
 #include "ci.h"
 #include "ci_hdrc_imx.h"
@@ -63,6 +64,11 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
 	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
 };
 
+static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_PMQOS,
+};
+
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
 	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
@@ -72,6 +78,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
 	{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
 	{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
+	{ .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
@@ -93,6 +100,8 @@ struct ci_hdrc_imx_data {
 	struct clk *clk_ahb;
 	struct clk *clk_per;
 	/* --------------------------------- */
+	struct pm_qos_request pm_qos_req;
+	const struct ci_hdrc_imx_platform_flag *plat_data;
 };
 
 /* Common functions shared by usbmisc drivers */
@@ -309,6 +318,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
+	data->plat_data = imx_platform_flag;
+	pdata.flags |= imx_platform_flag->flags;
 	platform_set_drvdata(pdev, data);
 	data->usbmisc_data = usbmisc_get_init_data(dev);
 	if (IS_ERR(data->usbmisc_data))
@@ -369,6 +380,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 			}
 		}
 	}
+
+	if (pdata.flags & CI_HDRC_PMQOS)
+		pm_qos_add_request(&data->pm_qos_req,
+			PM_QOS_CPU_DMA_LATENCY, 0);
+
 	ret = imx_get_clks(dev);
 	if (ret)
 		goto disable_hsic_regulator;
@@ -396,7 +412,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		usb_phy_init(pdata.usb_phy);
 	}
 
-	pdata.flags |= imx_platform_flag->flags;
 	if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
 		data->supports_runtime_pm = true;
 
@@ -439,6 +454,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 disable_hsic_regulator:
 	if (data->hsic_pad_regulator)
 		ret = regulator_disable(data->hsic_pad_regulator);
+	if (pdata.flags & CI_HDRC_PMQOS)
+		pm_qos_remove_request(&data->pm_qos_req);
 	return ret;
 }
 
@@ -455,6 +472,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 	if (data->override_phy_control)
 		usb_phy_shutdown(data->phy);
 	imx_disable_unprepare_clks(&pdev->dev);
+	if (data->plat_data->flags & CI_HDRC_PMQOS)
+		pm_qos_remove_request(&data->pm_qos_req);
 	if (data->hsic_pad_regulator)
 		regulator_disable(data->hsic_pad_regulator);
 
@@ -480,6 +499,9 @@ static int __maybe_unused imx_controller_suspend(struct device *dev)
 	}
 
 	imx_disable_unprepare_clks(dev);
+	if (data->plat_data->flags & CI_HDRC_PMQOS)
+		pm_qos_remove_request(&data->pm_qos_req);
+
 	data->in_lpm = true;
 
 	return 0;
@@ -497,6 +519,10 @@ static int __maybe_unused imx_controller_resume(struct device *dev)
 		return 0;
 	}
 
+	if (data->plat_data->flags & CI_HDRC_PMQOS)
+		pm_qos_add_request(&data->pm_qos_req,
+			PM_QOS_CPU_DMA_LATENCY, 0);
+
 	ret = imx_prepare_enable_clks(dev);
 	if (ret)
 		return ret;
drivers/usb/chipidea/usbmisc_imx.c +4 -0
index d8b67e150b12..b7a5727d0c8a 100644
@@ -763,6 +763,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,imx7d-usbmisc",
 		.data = &imx7d_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,imx7ulp-usbmisc",
+		.data = &imx7d_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
include/linux/usb/chipidea.h +1 -0
index 911e05af671e..edd89b7c8f18 100644
@@ -61,6 +61,7 @@ struct ci_hdrc_platform_data {
 #define CI_HDRC_OVERRIDE_PHY_CONTROL	BIT(12) /* Glue layer manages phy */
 #define CI_HDRC_REQUIRES_ALIGNED_DMA	BIT(13)
 #define CI_HDRC_IMX_IS_HSIC		BIT(14)
+#define CI_HDRC_PMQOS			BIT(15)
 	enum usb_dr_mode	dr_mode;
 #define CI_HDRC_CONTROLLER_RESET_EVENT		0
 #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
Signature · 1 line
2.14.1
author
#8 lore raw

PATCH v5 6/8 ARM: dts: imx7ulp: add imx7ulp USBOTG1 support

In reply to Peter Chen

Add imx7ulp USBOTG1 support.

---
 arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
arch/arm/boot/dts/imx7ulp.dtsi +28 -0
index d6b711011cba..2679856aaf65 100644
@@ -30,6 +30,7 @@
 		serial1 = &lpuart5;
 		serial2 = &lpuart6;
 		serial3 = &lpuart7;
+		usbphy0 = &usbphy1;
 	};
 
 	cpus {
@@ -133,6 +134,33 @@
 			clock-names = "ipg", "per";
 		};
 
+		usbotg1: usb@40330000 {
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+			reg = <0x40330000 0x200>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
+			phys = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x8>;
+			rx-burst-size-dword = <0x8>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@40330200 {
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+			#index-cells = <1>;
+			reg = <0x40330200 0x200>;
+		};
+
+		usbphy1: usb-phy@0x40350000 {
+			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+			reg = <0x40350000 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
+			#phy-cells = <0>;
+		};
+
 		usdhc0: mmc@40370000 {
 			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
 			reg = <0x40370000 0x10000>;
Signature · 1 line
2.14.1
author
#10 lore raw

PATCH v5 7/8 ARM: dts: imx7ulp-evk: enable USBOTG1 support

In reply to Peter Chen

Enable USBOTG1 support for evk board, it is dual-role function port.

---
 arch/arm/boot/dts/imx7ulp-evk.dts | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
arch/arm/boot/dts/imx7ulp-evk.dts +35 -0
index a09026a6d22e..c8a56a2ae9a5 100644
@@ -22,6 +22,17 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_vsd_3v3: regulator-vsd-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -40,6 +51,17 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
 &usdhc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc0>;
@@ -57,6 +79,19 @@
 		bias-pull-up;
 	};
 
+	pinctrl_usbotg1_vbus: otg1vbusgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC0__PTC0		0x20000
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+			IMX7ULP_PAD_PTC16__USB1_OC2	0x10003
+		>;
+	};
+
 	pinctrl_usdhc0: usdhc0grp {
 		fsl,pins = <
 			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
Signature · 1 line
2.14.1
Applied
#11 lore raw

Re: [PATCH v5 7/8] ARM: dts: imx7ulp-evk: enable USBOTG1 support

Quoted 4 lines · Peter Chen

Enable USBOTG1 support for evk board, it is dual-role function port.

Applied, thanks.

author
#12 lore raw

PATCH v5 8/8 usb: chipidea: imx: "fsl, usbphy" phandle is not mandatory now

In reply to Peter Chen

Since the chipidea common code support get the USB PHY phandle from "phys", the glue layer is not mandatory to get the "fsl,usbphy" phandle any more.

---
 drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/usb/chipidea/ci_hdrc_imx.c +3 -2
index a76708501236..b5abfe89190c 100644
@@ -398,8 +398,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(data->phy);
 		/* Return -EINVAL if no usbphy is available */
 		if (ret == -ENODEV)
-			ret = -EINVAL;
-		goto err_clk;
+			data->phy = NULL;
+		else
+			goto err_clk;
 	}
 
 	pdata.usb_phy = data->phy;
Signature · 1 line
2.14.1