RISC-V nommu support v2
Subsystems (15)
Hi all,
below is a series to support nommu mode on RISC-V. For now this series just works under qemu with the qemu-virt platform, but Damien has also been able to get kernel based on this tree with additional driver hacks to work on the Kendryte KD210, but that will take a while to cleanup an upstream.
To be useful this series also require the RISC-V binfmt_flat support, which I've sent out separately.
A branch that includes this series and the binfmt_flat support is available here:
git://git.infradead.org/users/hch/riscv.git riscv-nommu.2
Gitweb:
http://git.infradead.org/users/hch/riscv.git/shortlog/refs/heads/riscv-nommu.2
I've also pushed out a builtroot branch that can build a RISC-V nommu root filesystem here:
git://git.infradead.org/users/hch/buildroot.git riscv-nommu.2
Gitweb:
http://git.infradead.org/users/hch/buildroot.git/shortlog/refs/heads/riscv-nommu.2
Changes since v1:
- fixes so that a kernel with this series still work on builds with an IOMMU
- small clint cleanups
- the binfmt_flat base and buildroot now don't put arguments on the stack
PATCH 1/17 mm: provide a print_vma_addr stub for !CONFIG_MMU
--- include/linux/mm.h | 6 ++++++ 1 file changed, 6 insertions(+)
include/linux/mm.h +6 -0
@@ -2756,7 +2756,13 @@ extern int randomize_va_space;#endif const char *arch_vma_name (struct vm_area_struct *vma); +#ifdef CONFIG_MMU void print_vma_addr (char *prefix,unsigned long rip); +#else +static inline void print_vma_addr (char *prefix,unsigned long rip) +{ +} +#endif void *sparse_buffer_alloc (unsigned long size); struct page *sparse_mem_map_populate(unsigned long pnum, int nid,
Signature · 1 line
2.20.1
PATCH 2/17 mm: stub out all of swapops.h for !CONFIG_MMU
In reply to Christoph HellwigThe whole header file deals with swap entries and PTEs, none of which can exist for nommu builds.
--- include/linux/swapops.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
include/linux/swapops.h +3 -2
@@ -6,6 +6,8 @@#include <linux/bug.h> #include <linux/mm_types.h> +#ifdef CONFIG_MMU +/* * swapcache pages are stored in the swapper_space radix tree. We want to * get good packing density in that tree, so the index should be dense in
@@ -50,13 +52,11 @@ static inline pgoff_t swp_offset(swp_entry_t entry)return entry.val &SWP_OFFSET_MASK ; } -#ifdef CONFIG_MMU /* check whether a pte points to a swap entry */ static inline int is_swap_pte (pte_t pte) {return !pte_none (pte) && !pte_present (pte); } -#endif /* * Convert the arch-dependent pte representation of a swp_entry_t into an
@@ -375,4 +375,5 @@ static inline int non_swap_entry(swp_entry_t entry) }#endif +#endif /* CONFIG_MMU */ #endif /* _LINUX_SWAPOPS_H */
Signature · 1 line
2.20.1
PATCH 3/17 mm/nommu: fix the MAP_UNINITIALIZED flag
In reply to Christoph HellwigWe can't expose UAPI symbols differently based on CONFIG_ symbols, as userspace won't have them available. Instead always define the flag, but only respect it based on the config option.
--- arch/xtensa/include/uapi/asm/mman.h | 6 +----- include/uapi/asm-generic/mman-common.h | 8 +++----- mm/nommu.c | 4 +++- 3 files changed, 7 insertions(+), 11 deletions(-)
arch/xtensa/include/uapi/asm/mman.h +1 -5
@@ -56,12 +56,8 @@#define MAP_STACK 0x40000/* give out an address that is best suited for process/thread stacks */ #define MAP_HUGETLB 0x80000/* create a huge page mapping */ #define MAP_FIXED_NOREPLACE 0x100000/* MAP_FIXED which doesn't unmap underlying mapping */ -#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED -# define MAP_UNINITIALIZED 0x4000000/* For anonymous mmap, memory could be +#define MAP_UNINITIALIZED 0x4000000/* For anonymous mmap, memory could be * uninitialized */ -#else -# define MAP_UNINITIALIZED 0x0/* Don't support this flag */ -#endif /* * Flags for msync
include/uapi/asm-generic/mman-common.h +3 -5
@@ -19,15 +19,13 @@#define MAP_TYPE 0x0f/* Mask for type of mapping */ #define MAP_FIXED 0x10/* Interpret addr exactly */ #define MAP_ANONYMOUS 0x20/* don't use a file */ -#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED -# define MAP_UNINITIALIZED 0x4000000/* For anonymous mmap, memory could be uninitialized */ -#else -# define MAP_UNINITIALIZED 0x0/* Don't support this flag */ -#endif /* 0x0100 - 0x80000 flags are defined in asm-generic/mman.h */ #define MAP_FIXED_NOREPLACE 0x100000/* MAP_FIXED which doesn't unmap underlying mapping */ +#define MAP_UNINITIALIZED 0x4000000/* For anonymous mmap, memory could be +* uninitialized */ +/* * Flags for mlock */
mm/nommu.c +3 -1
@@ -1349,7 +1349,9 @@ unsigned long do_mmap(struct file *file,add_nommu_region (region);/* clear anonymous mappings that don't ask for uninitialized data */ -if (!vma->vm_file && !(flags &MAP_UNINITIALIZED )) +if (!vma->vm_file && + (!IS_ENABLED (CONFIG_MMAP_ALLOW_UNINITIALIZED ) || + !(flags &MAP_UNINITIALIZED )))memset ((void *)region->vm_start,0 , region->vm_end - region->vm_start);
Signature · 1 line
2.20.1
PATCH 4/17 irqchip/sifive-plic: set max threshold for ignored handlers
In reply to Christoph HellwigWhen running in M-mode we still the S-mode plic handlers in the DT. Ignore them by setting the maximum threshold.
--- drivers/irqchip/irq-sifive-plic.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/irqchip/irq-sifive-plic.c +10 -2
@@ -244,6 +244,7 @@ static int __init plic_init(struct device_node *node,struct plic_handler *handler;irq_hw_number_t hwirq;int cpu, hartid; +u32 threshold =0 ;if (of_irq_parse_one (node, i, &parent)) {pr_err ("failed to parse parent for context %d.\n" , i);
@@ -266,10 +267,16 @@ static int __init plic_init(struct device_node *node,continue ; } +/* +* When running in M-mode we need to ignore the S-mode handler. +* Here we assume it always comes later, but that might be a +* little fragile. +*/ handler =per_cpu_ptr (&plic_handlers, cpu);if (handler->present) {pr_warn ("handler already present for context %d.\n" , i); -continue ; + threshold =0xffffffff ; + goto done; } handler->present = true;
@@ -279,8 +286,9 @@ static int __init plic_init(struct device_node *node, handler->enable_base = plic_regs +ENABLE_BASE + i *ENABLE_PER_HART ; +done:/* priority must be > threshold to trigger an interrupt */ -writel (0 , handler->hart_base +CONTEXT_THRESHOLD ); +writel (threshold, handler->hart_base +CONTEXT_THRESHOLD );for (hwirq =1 ; hwirq <= nr_irqs; hwirq++)plic_toggle (handler, hwirq,0 ); nr_handlers++;
Signature · 1 line
2.20.1
PATCH 5/17 riscv: use CSR_SATP instead of the legacy sptbr name in switch_mm
In reply to Christoph HellwigSwitch to our own constant for the satp register instead of using the old name from a legacy version of the privileged spec.
--- arch/riscv/mm/context.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
arch/riscv/mm/context.c +1 -6
@@ -57,12 +57,7 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,cpumask_clear_cpu (cpu,mm_cpumask (prev));cpumask_set_cpu (cpu,mm_cpumask (next)); -/* -* Use the old spbtr name instead of using the current satp -* name to support binutils 2.29 which doesn't know about the -* privileged ISA 1.10 yet. -*/ -csr_write (sptbr,virt_to_pfn (next->pgd) |SATP_MODE ); +csr_write (CSR_SATP ,virt_to_pfn (next->pgd) |SATP_MODE );local_flush_tlb_all ();flush_icache_deferred (next);
Signature · 1 line
2.20.1
Re: [PATCH 05/17] riscv: use CSR_SATP instead of the legacy sptbr name in switch_mm
Quoted 26 lines · Christoph Hellwig
Switch to our own constant for the satp register instead of using the old name from a legacy version of the privileged spec.
Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/mm/context.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)arch/riscv/mm/context.c +1
-6@@ -57,12 +57,7 @@ void switch_mm(struct mm_struct *prev, structmm_struct *next,cpumask_clear_cpu (cpu ,mm_cpumask (prev ));cpumask_set_cpu (cpu,mm_cpumask (next)); -/* -* Use the old spbtr name instead of using the current satp -* name to support binutils 2.29 which doesn't know about the -* privileged ISA 1.10 yet. -*/ -csr_write (sptbr,virt_to_pfn (next->pgd) |SATP_MODE ); +csr_write (CSR_SATP ,virt_to_pfn (next->pgd) |SATP_MODE );local_flush_tlb_all ();
Quoted 1 line
flush_icache_deferred(next);
Signature · 2 lines
Regards, Atish
PATCH 6/17 riscv: refactor the IPI code
In reply to Christoph HellwigThis prepare for adding native non-SBI IPI code.
--- arch/riscv/kernel/smp.c | 55 +++++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 24 deletions(-)
arch/riscv/kernel/smp.c +31 -24
@@ -78,13 +78,38 @@ static void ipi_stop(void)wait_for_interrupt (); } +static void send_ipi_mask (const struct cpumask *mask,enum ipi_message_type op) +{ +int cpuid, hartid; +struct cpumask hartid_mask; + +cpumask_clear (&hartid_mask); +mb (); +for_each_cpu (cpuid, mask) { +set_bit (op, &ipi_data[cpuid].bits); + hartid =cpuid_to_hartid_map (cpuid); +cpumask_set_cpu (hartid, &hartid_mask); + } +mb (); +sbi_send_ipi (cpumask_bits (&hartid_mask)); +} + +static void send_ipi_single (int cpu,enum ipi_message_type op) +{ +send_ipi_mask (cpumask_of (cpu), op); +} + +static inline void clear_ipi (void ) +{ +csr_clear (CSR_SIP ,SIE_SSIE ); +} +void riscv_software_interrupt (void ) {unsigned long *pending_ipis = &ipi_data[smp_processor_id ()].bits;unsigned long *stats = ipi_data[smp_processor_id ()].stats; -/* Clear pending IPI */ -csr_clear (CSR_SIP ,SIE_SSIE ); +clear_ipi ();while (true) {unsigned long ops;
@@ -118,23 +143,6 @@ void riscv_software_interrupt(void) } } -static void -send_ipi_message (const struct cpumask *to_whom,enum ipi_message_type operation) -{ -int cpuid, hartid; -struct cpumask hartid_mask; - -cpumask_clear (&hartid_mask); -mb (); -for_each_cpu (cpuid, to_whom) { -set_bit (operation, &ipi_data[cpuid].bits); - hartid =cpuid_to_hartid_map (cpuid); -cpumask_set_cpu (hartid, &hartid_mask); - } -mb (); -sbi_send_ipi (cpumask_bits (&hartid_mask)); -} -static const char *const ipi_names[] = { [IPI_RESCHEDULE ] ="Rescheduling interrupts" , [IPI_CALL_FUNC ] ="Function call interrupts" ,
@@ -156,12 +164,12 @@ void show_ipi_stats(struct seq_file *p, int prec)void arch_send_call_function_ipi_mask (struct cpumask *mask) { -send_ipi_message (mask,IPI_CALL_FUNC ); +send_ipi_mask (mask,IPI_CALL_FUNC ); }void arch_send_call_function_single_ipi (int cpu) { -send_ipi_message (cpumask_of (cpu),IPI_CALL_FUNC ); +send_ipi_single (cpu,IPI_CALL_FUNC ); }void smp_send_stop (void )
@@ -176,7 +184,7 @@ void smp_send_stop(void)if (system_state <=SYSTEM_RUNNING )pr_crit ("SMP: stopping secondary CPUs\n" ); -send_ipi_message (&mask,IPI_CPU_STOP ); +send_ipi_mask (&mask,IPI_CPU_STOP ); }/* Wait up to one second for other CPUs to stop */
@@ -191,6 +199,5 @@ void smp_send_stop(void)void smp_send_reschedule (int cpu) { -send_ipi_message (cpumask_of (cpu),IPI_RESCHEDULE ); +send_ipi_single (cpu,IPI_RESCHEDULE ); } -
Signature · 1 line
2.20.1
PATCH 7/17 riscv: abstract out CSR names for supervisor vs machine mode
In reply to Christoph HellwigMany of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide a new X-naming layer so that we don't have to ifdef everywhere for M-mode Linux support.
Contains contributions from Damien Le Moal <[email protected]>.
--- arch/riscv/Kconfig | 4 ++ arch/riscv/include/asm/asm.h | 6 +++ arch/riscv/include/asm/csr.h | 58 ++++++++++++++++++++++++++-- arch/riscv/include/asm/irqflags.h | 12 +++--- arch/riscv/include/asm/processor.h | 2 +- arch/riscv/include/asm/ptrace.h | 16 ++++---- arch/riscv/include/asm/switch_to.h | 8 ++-- arch/riscv/kernel/asm-offsets.c | 8 ++-- arch/riscv/kernel/entry.S | 62 ++++++++++++++++-------------- arch/riscv/kernel/fpu.S | 8 ++-- arch/riscv/kernel/head.S | 12 +++--- arch/riscv/kernel/irq.c | 4 +- arch/riscv/kernel/process.c | 15 ++++---- arch/riscv/kernel/signal.c | 21 +++++----- arch/riscv/kernel/traps.c | 16 ++++---- arch/riscv/lib/uaccess.S | 12 +++--- arch/riscv/mm/extable.c | 4 +- arch/riscv/mm/fault.c | 6 +-- drivers/clocksource/timer-riscv.c | 8 ++-- drivers/irqchip/irq-sifive-plic.c | 4 +- 20 files changed, 177 insertions(+), 109 deletions(-)
arch/riscv/Kconfig +4 -0
@@ -52,6 +52,10 @@ config RISCV select ARCH_HAS_MMIOWB select HAVE_EBPF_JIT if 64BIT +# set if we run in machine mode, cleared if we run in supervisor mode +config M_MODE + bool + config MMU def_bool y
arch/riscv/include/asm/asm.h +6 -0
@@ -65,4 +65,10 @@#error "Unexpected __SIZEOF_SHORT__"#endif +#ifdef CONFIG_M_MODE +# define Xret mret +#else +# define Xret sret +#endif +#endif /* _ASM_RISCV_ASM_H */
arch/riscv/include/asm/csr.h +55 -3
88 lines not on this page · raw message
arch/riscv/include/asm/irqflags.h +6 -6
@@ -13,31 +13,31 @@/* read interrupt enabled status */ static inline unsigned long arch_local_save_flags (void ) { -return csr_read (CSR_SSTATUS ); +return csr_read (CSR_XSTATUS ); }/* unconditionally enable interrupts */ static inline void arch_local_irq_enable (void ) { -csr_set (CSR_SSTATUS ,SR_SIE ); +csr_set (CSR_XSTATUS ,SR_XIE ); }/* unconditionally disable interrupts */ static inline void arch_local_irq_disable (void ) { -csr_clear (CSR_SSTATUS ,SR_SIE ); +csr_clear (CSR_XSTATUS ,SR_XIE ); }/* get status and disable interrupts */ static inline unsigned long arch_local_irq_save (void ) { -return csr_read_clear (CSR_SSTATUS ,SR_SIE ); +return csr_read_clear (CSR_XSTATUS ,SR_XIE ); }/* test flags */ static inline int arch_irqs_disabled_flags (unsigned long flags) { -return !(flags &SR_SIE ); +return !(flags &SR_XIE ); }/* test hardware interrupt enable bit */
@@ -49,7 +49,7 @@ static inline int arch_irqs_disabled(void)/* set interrupt enabled status */ static inline void arch_local_irq_restore (unsigned long flags) { -csr_set (CSR_SSTATUS , flags &SR_SIE ); +csr_set (CSR_XSTATUS , flags &SR_XIE ); }#endif /* _ASM_RISCV_IRQFLAGS_H */
arch/riscv/include/asm/processor.h +1 -1
@@ -42,7 +42,7 @@ struct thread_struct { ((struct pt_regs *)(task_stack_page (tsk) +THREAD_SIZE \ - ALIGN(sizeof(struct pt_regs), STACK_ALIGN))) -#define KSTK_EIP (tsk) (task_pt_regs(tsk)->sepc) +#define KSTK_EIP (tsk) (task_pt_regs(tsk)->xepc)#define KSTK_ESP (tsk) (task_pt_regs(tsk)->sp)
arch/riscv/include/asm/ptrace.h +8 -8
@@ -12,7 +12,7 @@ #ifndef __ASSEMBLY__ struct pt_regs { - unsigned long sepc; + unsigned long xepc; unsigned long ra; unsigned long sp; unsigned long gp;
@@ -44,10 +44,10 @@ struct pt_regs {unsigned long t4;unsigned long t5;unsigned long t6; -/* Supervisor CSRs */ -unsigned long sstatus; -unsigned long sbadaddr; -unsigned long scause; +/* Supervisor/Machine CSRs */ +unsigned long xstatus; +unsigned long xbadaddr; +unsigned long xcause;/* a0 value before the syscall */ unsigned long orig_a0; };
@@ -58,18 +58,18 @@ struct pt_regs {#define REG_FMT "%08lx"#endif -#define user_mode (regs) (((regs)->sstatus & SR_SPP) == 0) +#define user_mode (regs) (((regs)->xstatus & SR_XPP) == 0)/* Helpers for working with the instruction pointer */ static inline unsigned long instruction_pointer (struct pt_regs *regs) { -return regs->sepc; +return regs->xepc; }static inline void instruction_pointer_set (struct pt_regs *regs,unsigned long val) { - regs->sepc = val; + regs->xepc = val; }#define profile_pc (regs) instruction_pointer(regs)
arch/riscv/include/asm/switch_to.h +4 -4
@@ -16,13 +16,13 @@ extern void __fstate_restore(struct task_struct *restore_from);static inline void __fstate_clean (struct pt_regs *regs) { - regs->sstatus |= (regs->sstatus & ~(SR_FS )) |SR_FS_CLEAN ; + regs->xstatus |= (regs->xstatus & ~(SR_FS )) |SR_FS_CLEAN ; }static inline void fstate_save (struct task_struct *task,struct pt_regs *regs) { -if ((regs->sstatus &SR_FS ) ==SR_FS_DIRTY ) { +if ((regs->xstatus &SR_FS ) ==SR_FS_DIRTY ) {__fstate_save (task);__fstate_clean (regs); }
@@ -31,7 +31,7 @@ static inline void fstate_save(struct task_struct *task,static inline void fstate_restore (struct task_struct *task,struct pt_regs *regs) { -if ((regs->sstatus &SR_FS ) !=SR_FS_OFF ) { +if ((regs->xstatus &SR_FS ) !=SR_FS_OFF ) {__fstate_restore (task);__fstate_clean (regs); }
@@ -43,7 +43,7 @@ static inline void __switch_to_aux(struct task_struct *prev,struct pt_regs *regs; regs =task_pt_regs (prev); -if (unlikely (regs->sstatus &SR_SD )) +if (unlikely (regs->xstatus &SR_SD ))fstate_save (prev, regs);fstate_restore (next,task_pt_regs (next)); }
arch/riscv/kernel/asm-offsets.c +4 -4
@@ -71,7 +71,7 @@ void asm_offsets(void)OFFSET (TASK_THREAD_FCSR , task_struct, thread.fstate.fcsr);DEFINE (PT_SIZE ,sizeof (struct pt_regs )); -OFFSET (PT_SEPC , pt_regs, sepc); +OFFSET (PT_XEPC , pt_regs, xepc);OFFSET (PT_RA , pt_regs, ra);OFFSET (PT_FP , pt_regs, s0);OFFSET (PT_S0 , pt_regs, s0);
@@ -105,9 +105,9 @@ void asm_offsets(void)OFFSET (PT_T6 , pt_regs, t6);OFFSET (PT_GP , pt_regs, gp);OFFSET (PT_ORIG_A0 , pt_regs, orig_a0); -OFFSET (PT_SSTATUS , pt_regs, sstatus); -OFFSET (PT_SBADADDR , pt_regs, sbadaddr); -OFFSET (PT_SCAUSE , pt_regs, scause); +OFFSET (PT_XSTATUS , pt_regs, xstatus); +OFFSET (PT_XBADADDR , pt_regs, xbadaddr); +OFFSET (PT_XCAUSE , pt_regs, xcause);/* * THREAD_{F,X}* might be larger than a S-type offset can handle, but
arch/riscv/kernel/entry.S +34 -28
128 lines not on this page · raw message
arch/riscv/kernel/fpu.S +4 -4
@@ -23,7 +23,7 @@ ENTRY(__fstate_save) li a2, TASK_THREAD_F0 add a0, a0, a2 li t1, SR_FS - csrs sstatus, t1 + csrs CSR_XSTATUS, t1 frcsr t0 fsd f0, TASK_THREAD_F0_F0(a0) fsd f1, TASK_THREAD_F1_F0(a0)
@@ -58,7 +58,7 @@ ENTRY(__fstate_save) fsd f30, TASK_THREAD_F30_F0(a0) fsd f31, TASK_THREAD_F31_F0(a0) sw t0, TASK_THREAD_FCSR_F0(a0) - csrc sstatus, t1 + csrc CSR_XSTATUS, t1 ret ENDPROC(__fstate_save)
@@ -67,7 +67,7 @@ ENTRY(__fstate_restore) add a0, a0, a2 li t1, SR_FS lw t0, TASK_THREAD_FCSR_F0(a0) - csrs sstatus, t1 + csrs CSR_XSTATUS, t1 fld f0, TASK_THREAD_F0_F0(a0) fld f1, TASK_THREAD_F1_F0(a0) fld f2, TASK_THREAD_F2_F0(a0)
@@ -101,6 +101,6 @@ ENTRY(__fstate_restore) fld f30, TASK_THREAD_F30_F0(a0) fld f31, TASK_THREAD_F31_F0(a0) fscsr t0 - csrc sstatus, t1 + csrc CSR_XSTATUS, t1 ret ENDPROC(__fstate_restore)
arch/riscv/kernel/head.S +6 -6
@@ -15,8 +15,8 @@ __INIT ENTRY(_start) /* Mask all interrupts */ - csrw CSR_SIE, zero - csrw CSR_SIP, zero + csrw CSR_XIE, zero + csrw CSR_XIP, zero /* Load the global pointer */ .option push
@@ -29,7 +29,7 @@ ENTRY(_start) * floating point in kernel space */ li t0, SR_FS - csrc sstatus, t0 + csrc CSR_XSTATUS, t0 /* Pick one hart to run the main boot sequence */ la a3, hart_lottery
@@ -78,7 +78,7 @@ relocate: /* Point stvec to virtual address of intruction after satp write */ la a0, 1f add a0, a0, a1 - csrw CSR_STVEC, a0 + csrw CSR_XTVEC, a0 /* Compute satp for kernel page tables, but don't load it yet */ la a2, swapper_pg_dir
@@ -101,7 +101,7 @@ relocate: 1: /* Set trap vector to spin forever to help debug */ la a0, .Lsecondary_park - csrw CSR_STVEC, a0 + csrw CSR_XTVEC, a0 /* Reload the global pointer */ .option push
@@ -127,7 +127,7 @@ relocate: /* Set trap vector to spin forever to help debug */ la a3, .Lsecondary_park - csrw CSR_STVEC, a3 + csrw CSR_XTVEC, a3 slli a3, a0, LGREG la a1, __cpu_up_stack_pointer
arch/riscv/kernel/irq.c +2 -2
@@ -29,7 +29,7 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)struct pt_regs *old_regs =set_irq_regs (regs);irq_enter (); -switch (regs->scause & ~SCAUSE_IRQ_FLAG ) { +switch (regs->xcause & ~XCAUSE_IRQ_FLAG ) {case INTERRUPT_CAUSE_TIMER :riscv_timer_interrupt ();break ;
@@ -46,7 +46,7 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)handle_arch_irq (regs);break ;default : -pr_alert ("unexpected interrupt cause 0x%lx" , regs->scause); +pr_alert ("unexpected interrupt cause 0x%lx" , regs->xcause);BUG (); }irq_exit ();
arch/riscv/kernel/process.c +8 -7
@@ -34,7 +34,7 @@ void show_regs(struct pt_regs *regs)show_regs_print_info (KERN_DEFAULT );pr_cont ("sepc: " REG_FMT " ra : " REG_FMT " sp : " REG_FMT "\n" , - regs->sepc, regs->ra, regs->sp); + regs->xepc, regs->ra, regs->sp);pr_cont (" gp : " REG_FMT " tp : " REG_FMT " t0 : " REG_FMT "\n" , regs->gp, regs->tp, regs->t0); pr_cont(" t1 : " REG_FMT " t2 : " REG_FMT " s0 : " REG_FMT "\n",
@@ -56,17 +56,17 @@ void show_regs(struct pt_regs *regs)pr_cont (" t5 : " REG_FMT " t6 : " REG_FMT "\n" , regs->t5, regs->t6); -pr_cont ("sstatus: " REG_FMT " sbadaddr: " REG_FMT " scause: " REG_FMT "\n" , - regs->sstatus, regs->sbadaddr, regs->scause); +pr_cont ("status: " REG_FMT " badaddr: " REG_FMT " cause: " REG_FMT "\n" , + regs->xstatus, regs->xbadaddr, regs->xcause); }void start_thread (struct pt_regs *regs,unsigned long pc,unsigned long sp) { - regs->sstatus =SR_SPIE ; + regs->xstatus =SR_XPIE ;if (has_fpu) - regs->sstatus |=SR_FS_INITIAL ; - regs->sepc = pc; + regs->xstatus |=SR_FS_INITIAL ; + regs->xepc = pc; regs->sp = sp;set_fs (USER_DS ); }
@@ -101,7 +101,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,const registerunsigned long gp __asm__ ("gp" );memset (childregs,0 ,sizeof (struct pt_regs )); childregs->gp = gp; - childregs->sstatus =SR_SPP |SR_SPIE ;/* Supervisor, irqs on */ +/* Supervisor/Machine, irqs on: */ + childregs->xstatus =SR_XPP |SR_XPIE ; p->thread.ra = (unsigned long )ret_from_kernel_thread; p->thread.s[0 ] = usp;/* fn */
arch/riscv/kernel/signal.c +10 -11
@@ -124,7 +124,7 @@ SYSCALL_DEFINE0(rt_sigreturn)pr_info_ratelimited ("%s[%d]: bad frame in %s: frame=%p pc=%p sp=%p\n" , task->comm,task_pid_nr (task), __func__, - frame, (void *)regs->sepc, (void *)regs->sp); + frame, (void *)regs->xepc, (void *)regs->sp); }force_sig (SIGSEGV , task);return 0 ;
@@ -199,7 +199,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,* We always pass siginfo and mcontext, regardless of SA_SIGINFO, * since some things rely on this (e.g. glibc's debug/segfault.c). */ - regs->sepc = (unsigned long )ksig->ka.sa.sa_handler; + regs->xepc = (unsigned long )ksig->ka.sa.sa_handler; regs->sp = (unsigned long )frame; regs->a0 = ksig->sig;/* a0: signal number */ regs->a1 = (unsigned long )(&frame->info);/* a1: siginfo pointer */
@@ -208,7 +208,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,#if DEBUG_SIG pr_info ("SIG deliver (%s:%d): sig=%d pc=%p ra=%p sp=%p\n" , current->comm,task_pid_nr (current), ksig->sig, - (void *)regs->sepc, (void *)regs->ra, frame); + (void *)regs->xepc, (void *)regs->ra, frame);#endif return 0 ;
@@ -220,10 +220,9 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)int ret;/* Are we from a system call? */ -if (regs->scause ==EXC_SYSCALL ) { +if (regs->xcause ==EXC_SYSCALL ) {/* Avoid additional syscall restarting via ret_from_exception */ - regs->scause =-1UL ; - + regs->xcause =-1UL ;/* If so, check system call restarting.. */ switch (regs->a0) {case -ERESTART_RESTARTBLOCK :
@@ -239,7 +238,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)/* fallthrough */ case -ERESTARTNOINTR : regs->a0 = regs->orig_a0; - regs->sepc -=0x4 ; + regs->xepc -=0x4 ;break ; } }
@@ -261,9 +260,9 @@ static void do_signal(struct pt_regs *regs) }/* Did we come from a system call? */ -if (regs->scause ==EXC_SYSCALL ) { +if (regs->xcause ==EXC_SYSCALL ) {/* Avoid additional syscall restarting via ret_from_exception */ - regs->scause =-1UL ; + regs->xcause =-1UL ;/* Restart the system call - no handlers present */ switch (regs->a0) {
@@ -271,12 +270,12 @@ static void do_signal(struct pt_regs *regs)case -ERESTARTSYS :case -ERESTARTNOINTR : regs->a0 = regs->orig_a0; - regs->sepc -=0x4 ; + regs->xepc -=0x4 ;break ;case -ERESTART_RESTARTBLOCK : regs->a0 = regs->orig_a0; regs->a7 = __NR_restart_syscall; - regs->sepc -=0x4 ; + regs->xepc -=0x4 ;break ; } }
arch/riscv/kernel/traps.c +8 -8
@@ -40,7 +40,7 @@ void die(struct pt_regs *regs, const char *str)print_modules ();show_regs (regs); - ret =notify_die (DIE_OOPS , str, regs,0 , regs->scause,SIGSEGV ); + ret =notify_die (DIE_OOPS , str, regs,0 , regs->xcause,SIGSEGV );bust_spinlocks (0 );add_taint (TAINT_DIE ,LOCKDEP_NOW_UNRELIABLE );
@@ -84,7 +84,7 @@ static void do_trap_error(struct pt_regs *regs, int signo, int code,#define DO_ERROR_INFO (name, signo, code, str) \ asmlinkage void name(struct pt_regs *regs) \ { \ - do_trap_error(regs, signo, code, regs->sepc, "Oops - " str); \ + do_trap_error(regs, signo, code, regs->xepc, "Oops - " str); \ } DO_ERROR_INFO(do_trap_unknown,
@@ -127,12 +127,12 @@ asmlinkage void do_trap_break(struct pt_regs *regs)if (!user_mode (regs)) {enum bug_trap_type type; - type =report_bug (regs->sepc, regs); + type =report_bug (regs->xepc, regs);switch (type) {case BUG_TRAP_TYPE_NONE :break ;case BUG_TRAP_TYPE_WARN : - regs->sepc +=get_break_insn_length (regs->sepc); + regs->xepc +=get_break_insn_length (regs->xepc);break ;case BUG_TRAP_TYPE_BUG :die (regs,"Kernel BUG" );
@@ -140,7 +140,7 @@ asmlinkage void do_trap_break(struct pt_regs *regs) }#endif /* CONFIG_GENERIC_BUG */ -force_sig_fault (SIGTRAP ,TRAP_BRKPT , (void __user *)(regs->sepc), current); +force_sig_fault (SIGTRAP ,TRAP_BRKPT , (void __user *)(regs->xepc), current); }#ifdef CONFIG_GENERIC_BUG
@@ -165,9 +165,9 @@ void __init trap_init(void)* Set sup0 scratch register to 0, indicating to exception vector * that we are presently executing in the kernel */ -csr_write (CSR_SSCRATCH ,0 ); +csr_write (CSR_XSCRATCH ,0 );/* Set the exception vector address */ -csr_write (CSR_STVEC , &handle_exception); +csr_write (CSR_XTVEC , &handle_exception);/* Enable all interrupts */ -csr_write (CSR_SIE ,-1 ); +csr_write (CSR_XIE ,-1 ); }
arch/riscv/lib/uaccess.S +6 -6
@@ -18,7 +18,7 @@ ENTRY(__asm_copy_from_user) /* Enable access to user memory */ li t6, SR_SUM - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 add a3, a1, a2 /* Use word-oriented copy only if low-order bits match */
@@ -47,7 +47,7 @@ ENTRY(__asm_copy_from_user) 3: /* Disable access to user memory */ - csrc sstatus, t6 + csrc CSR_XSTATUS, t6 li a0, 0 ret 4: /* Edge case: unalignment */
@@ -72,7 +72,7 @@ ENTRY(__clear_user) /* Enable access to user memory */ li t6, SR_SUM - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 add a3, a0, a1 addi t0, a0, SZREG-1
@@ -94,7 +94,7 @@ ENTRY(__clear_user) 3: /* Disable access to user memory */ - csrc sstatus, t6 + csrc CSR_XSTATUS, t6 li a0, 0 ret 4: /* Edge case: unalignment */
@@ -114,11 +114,11 @@ ENDPROC(__clear_user) /* Fixup code for __copy_user(10) and __clear_user(11) */ 10: /* Disable access to user memory */ - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 mv a0, a2 ret 11: - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 mv a0, a1 ret .previous
arch/riscv/mm/extable.c +2 -2
@@ -15,9 +15,9 @@ int fixup_exception(struct pt_regs *regs) {const struct exception_table_entry *fixup; - fixup =search_exception_tables (regs->sepc); + fixup =search_exception_tables (regs->xepc);if (fixup) { - regs->sepc = fixup->fixup; + regs->xepc = fixup->fixup;return 1 ; }return 0 ;
arch/riscv/mm/fault.c +3 -3
@@ -32,8 +32,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs)int code =SEGV_MAPERR ;vm_fault_t fault; - cause = regs->scause; - addr = regs->sbadaddr; + cause = regs->xcause; + addr = regs->xbadaddr; tsk = current; mm = tsk->mm;
@@ -51,7 +51,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs) goto vmalloc_fault;/* Enable interrupts if they were enabled in the parent context. */ -if (likely (regs->sstatus &SR_SPIE )) +if (likely (regs->xstatus &SR_XPIE ))local_irq_enable ();/*
drivers/clocksource/timer-riscv.c +4 -4
@@ -28,7 +28,7 @@static int riscv_clock_next_event (unsigned long delta,struct clock_event_device *ce) { -csr_set (sie,SIE_STIE ); +csr_set (CSR_XIE ,XIE_XTIE );sbi_set_timer (get_cycles64 () + delta);return 0 ; }
@@ -70,13 +70,13 @@ static int riscv_timer_starting_cpu(unsigned int cpu) ce->cpumask =cpumask_of (cpu);clockevents_config_and_register (ce, riscv_timebase,100 ,0x7fffffff ); -csr_set (sie,SIE_STIE ); +csr_set (CSR_XIE ,XIE_XTIE );return 0 ; }static int riscv_timer_dying_cpu (unsigned int cpu) { -csr_clear (sie,SIE_STIE ); +csr_clear (CSR_XIE ,XIE_XTIE );return 0 ; }
@@ -85,7 +85,7 @@ void riscv_timer_interrupt(void) {struct clock_event_device *evdev =this_cpu_ptr (&riscv_clock_event); -csr_clear (sie,SIE_STIE ); +csr_clear (CSR_XIE ,XIE_XTIE ); evdev->event_handler (evdev); }
drivers/irqchip/irq-sifive-plic.c +2 -2
@@ -179,7 +179,7 @@ static void plic_handle_irq(struct pt_regs *regs)WARN_ON_ONCE (!handler->present); -csr_clear (sie,SIE_SEIE ); +csr_clear (CSR_XIE ,XIE_XEIE );while ((hwirq =readl (claim))) {int irq =irq_find_mapping (plic_irqdomain, hwirq);
@@ -190,7 +190,7 @@ static void plic_handle_irq(struct pt_regs *regs)generic_handle_irq (irq);writel (hwirq, claim); } -csr_set (sie,SIE_SEIE ); +csr_set (CSR_XIE ,XIE_XEIE ); }/*
Signature · 1 line
2.20.1
Re: [PATCH 07/17] riscv: abstract out CSR names for supervisor vs machine mode
Quoted 41 lines · Christoph Hellwig
Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide a new X-naming layer so that we don't have to ifdef everywhere for M-mode Linux support.
Contains contributions from Damien Le Moal <[email protected]>.
Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/Kconfig | 4 ++ arch/riscv/include/asm/asm.h | 6 +++ arch/riscv/include/asm/csr.h | 58 ++++++++++++++++++++++++++-- arch/riscv/include/asm/irqflags.h | 12 +++--- arch/riscv/include/asm/processor.h | 2 +- arch/riscv/include/asm/ptrace.h | 16 ++++---- arch/riscv/include/asm/switch_to.h | 8 ++-- arch/riscv/kernel/asm-offsets.c | 8 ++-- arch/riscv/kernel/entry.S | 62 ++++++++++++++++---------- ---- arch/riscv/kernel/fpu.S | 8 ++-- arch/riscv/kernel/head.S | 12 +++--- arch/riscv/kernel/irq.c | 4 +- arch/riscv/kernel/process.c | 15 ++++---- arch/riscv/kernel/signal.c | 21 +++++----- arch/riscv/kernel/traps.c | 16 ++++---- arch/riscv/lib/uaccess.S | 12 +++--- arch/riscv/mm/extable.c | 4 +- arch/riscv/mm/fault.c | 6 +-- drivers/clocksource/timer-riscv.c | 8 ++-- drivers/irqchip/irq-sifive-plic.c | 4 +- 20 files changed, 177 insertions(+), 109 deletions(-)arch/riscv/Kconfig +1
-0@@ -52,6 +52,10 @@ config RISCV select ARCH_HAS_MMIOWB select HAVE_EBPF_JIT if 64BIT +# set if we run in machine mode, cleared if we run in supervisormode
arch/riscv/Kconfig config RISCV · line 58
Quoted 3 lines
arch/riscv/Kconfig +3
-0+config M_MODE + bool +
Some nits:
I think RISCV_M_MODE in stead of M_MODE makes it more explicit. But I am not entire sure about the standard practice in this case.
Quoted 58 lines
config MMU
arch/riscv/Kconfig +0
-0def_bool yarch/riscv/include/asm/asm.h +6
-0@@ -65,4 +65,10 @@#error "Unexpected __SIZEOF_SHORT__"#endif +#ifdef CONFIG_M_MODE +# define Xret mret +#else +# define Xret sret +#endif +#endif /* _ASM_RISCV_ASM_H */ arch/riscv/include/asm/csr.h +0
-0@@ -11,8 +11,11 @@/* Status register flags */ #define SR_SIE _AC(0x00000002, UL)/* Supervisor Interrupt Enable */
+#defineSR_MIE_AC(0x00000008, UL)/* Machine
Interrupt Enable */
#defineSR_SPIE_AC(0x00000020, UL)/* Previous
Supervisor IE */
+#defineSR_MPIE_AC(0x00000080, UL)/* Previous Machine
IE */
#defineSR_SPP_AC(0x00000100, UL)/* Previously
Supervisor */
+#defineSR_MPP_AC(0x00001800, UL)/* Previously
Machine */
#defineSR_SUM_AC(0x00040000, UL)/* Supervisor User
Memory Access */#define
SR_FS_AC(0x00006000, UL)/* Floating-point
Status */arch/riscv/include/asm/csr.h +2
-2@@ -44,8 +47,8 @@#define SATP_MODE SATP_MODE_39#endif -/* SCAUSE */ -#define SCAUSE_IRQ_FLAG (_AC(1, UL) << (__riscv_xlen - 1)) +/* *CAUSE */ +#define XCAUSE_IRQ_FLAG (_AC(1, UL) << (__riscv_xlen - 1))#define
IRQ_U_SOFT0
#defineIRQ_S_SOFT1
arch/riscv/include/asm/csr.h line 73
Quoted 5 lines
arch/riscv/include/asm/csr.h +1
-1@@ -67,11 +70,26 @@#define EXC_LOAD_PAGE_FAULT 13#define EXC_STORE_PAGE_FAULT 15 -/* SIE (Interrupt Enable) and SIP (Interrupt Pending) flags */ +/* MIE / MIP flags: */
Keep the abbreviation definitions for IE & IP ?
They are particulary
help for new RISC-V developers.
Quoted 892 lines
arch/riscv/include/asm/csr.h +49
-0+#define MIE_MSIE (_AC(0x1, UL) << IRQ_M_SOFT) +#define MIE_MTIE (_AC(0x1, UL) << IRQ_M_TIMER) +#define MIE_MEIE (_AC(0x1, UL) << IRQ_M_EXT) + +/* SIE / SIP flags: */ #define SIE_SSIE (_AC(0x1, UL) << IRQ_S_SOFT)#define SIE_STIE (_AC(0x1, UL) << IRQ_S_TIMER)#define SIE_SEIE (_AC(0x1, UL) << IRQ_S_EXT) +/* symbolic CSR names: */ +#define CSR_MSTATUS 0x300 +#define CSR_MIE 0x304 +#define CSR_MTVEC 0x305 +#define CSR_MSCRATCH 0x340 +#define CSR_MEPC 0x341 +#define CSR_MCAUSE 0x342 +#define CSR_MTVAL 0x343 +#define CSR_MIP 0x344 +#define CSR_CYCLE 0xc00#define CSR_TIME 0xc01#define CSR_INSTRET 0xc02@@ -89,6 +107,40 @@#define CSR_TIMEH 0xc81#define CSR_INSTRETH 0xc82 +#ifdef CONFIG_M_MODE +# define CSR_XSTATUS CSR_MSTATUS +# define CSR_XIE CSR_MIE +# define CSR_XTVEC CSR_MTVEC +# define CSR_XSCRATCH CSR_MSCRATCH +# define CSR_XEPC CSR_MEPC +# define CSR_XCAUSE CSR_MCAUSE +# define CSR_XTVAL CSR_MTVAL +# define CSR_XIP CSR_MIP + +# define SR_XIE SR_MIE +# define SR_XPIE SR_MPIE +# define SR_XPP SR_MPP + +# define XIE_XTIE MIE_MTIE +# define XIE_XEIE MIE_MEIE +#else /* CONFIG_M_MODE */ +# define CSR_XSTATUS CSR_SSTATUS +# define CSR_XIE CSR_SIE +# define CSR_XTVEC CSR_STVEC +# define CSR_XSCRATCH CSR_SSCRATCH +# define CSR_XEPC CSR_SEPC +# define CSR_XCAUSE CSR_SCAUSE +# define CSR_XTVAL CSR_STVAL +# define CSR_XIP CSR_SIP + +# define SR_XIE SR_SIE +# define SR_XPIE SR_SPIE +# define SR_XPP SR_SPP + +# define XIE_XTIE SIE_STIE +# define XIE_XEIE SIE_SEIE +#endif /* CONFIG_M_MODE */ +#ifndef __ASSEMBLY__#define csr_swap (csr, val) \arch/riscv/include/asm/irqflags.h +6
-6@@ -13,31 +13,31 @@/* read interrupt enabled status */ static inline unsigned long arch_local_save_flags (void ) { -return csr_read (CSR_SSTATUS ); +return csr_read (CSR_XSTATUS ); }/* unconditionally enable interrupts */ static inline void arch_local_irq_enable (void ) { -csr_set (CSR_SSTATUS ,SR_SIE ); +csr_set (CSR_XSTATUS ,SR_XIE ); }/* unconditionally disable interrupts */ static inline void arch_local_irq_disable (void ) { -csr_clear (CSR_SSTATUS ,SR_SIE ); +csr_clear (CSR_XSTATUS ,SR_XIE ); }/* get status and disable interrupts */ static inline unsigned long arch_local_irq_save (void ) { -return csr_read_clear (CSR_SSTATUS ,SR_SIE ); +return csr_read_clear (CSR_XSTATUS ,SR_XIE ); }/* test flags */ static inline int arch_irqs_disabled_flags (unsigned long flags) { -return !(flags &SR_SIE ); +return !(flags &SR_XIE ); }/* test hardware interrupt enable bit */ @@ -49,7 +49,7 @@ static inline int arch_irqs_disabled(void)/* set interrupt enabled status */ static inline void arch_local_irq_restore (unsigned long flags) { -csr_set (CSR_SSTATUS , flags &SR_SIE ); +csr_set (CSR_XSTATUS , flags &SR_XIE ); }#endif /* _ASM_RISCV_IRQFLAGS_H */ arch/riscv/include/asm/processor.h +1
-1@@ -42,7 +42,7 @@ struct thread_struct { ((struct pt_regs *)(task_stack_page (tsk) +THREAD_SIZE \ -ALIGN (sizeof (struct pt_regs ), STACK_ALIGN))) -#define KSTK_EIP (tsk) (task_pt_regs(tsk)->sepc) +#define KSTK_EIP (tsk) (task_pt_regs(tsk)->xepc)#define KSTK_ESP (tsk) (task_pt_regs(tsk)->sp)arch/riscv/include/asm/ptrace.h +8
-8@@ -12,7 +12,7 @@ #ifndef __ASSEMBLY__ struct pt_regs { - unsigned long sepc; + unsigned long xepc; unsigned long ra; unsigned long sp; unsigned long gp;@@ -44,10 +44,10 @@ struct pt_regs {unsigned long t4;unsigned long t5;unsigned long t6; -/* Supervisor CSRs */ -unsigned long sstatus; -unsigned long sbadaddr; -unsigned long scause; +/* Supervisor/Machine CSRs */ +unsigned long xstatus; +unsigned long xbadaddr; +unsigned long xcause;/* a0 value before the syscall */ unsigned long orig_a0; };@@ -58,18 +58,18 @@ struct pt_regs {#define REG_FMT "%08lx"#endif -#define user_mode (regs) (((regs)->sstatus & SR_SPP) == 0) +#define user_mode (regs) (((regs)->xstatus & SR_XPP) == 0)/* Helpers for working with the instruction pointer */ static inline unsigned long instruction_pointer (struct pt_regs *regs) { -return regs->sepc; +return regs->xepc; }static inline void instruction_pointer_set (struct pt_regs *regs,unsigned long val) { - regs->sepc = val; + regs->xepc = val; }#define
profile_pc(regs)instruction_pointer(regs)arch/riscv/include/asm/switch_to.h +2
-2@@ -16,13 +16,13 @@ extern void __fstate_restore(struct task_struct *restore_from);static inline void __fstate_clean (struct pt_regs *regs) { - regs->sstatus |= (regs->sstatus & ~(SR_FS )) |SR_FS_CLEAN ; + regs->xstatus |= (regs->xstatus & ~(SR_FS )) |SR_FS_CLEAN ; }static inline void fstate_save (struct task_struct *task,struct pt_regs *regs) { -if ((regs->sstatus &SR_FS ) ==SR_FS_DIRTY ) { +if ((regs->xstatus &SR_FS ) ==SR_FS_DIRTY ) {__fstate_save (task);__fstate_clean (regs);arch/riscv/include/asm/switch_to.h +1
-1}@@ -31,7 +31,7 @@ static inline void fstate_save(struct task_struct *task, static inline void fstate_restore(struct task_struct *task,struct pt_regs *regs) { -if ((regs->sstatus &SR_FS ) !=SR_FS_OFF ) { +if ((regs->xstatus &SR_FS ) !=SR_FS_OFF ) {__fstate_restore (task);__fstate_clean (regs);arch/riscv/include/asm/switch_to.h +1
-1}@@ -43,7 +43,7 @@ static inline void __switch_to_aux(structtask_struct *prev, struct pt_regs *regs; regs =task_pt_regs (prev); -if (unlikely (regs->sstatus &SR_SD )) +if (unlikely (regs->xstatus &SR_SD ))fstate_save (prev, regs);fstate_restore (next,task_pt_regs (next));}
arch/riscv/kernel/asm- renamed from arch/riscv/kernel/asm-offsets.c +0
-0
offsets.c
index9f5628c38ac9..d631ad41917b100644arch/riscv/kernel/asm-offsets.c +4
-4@@ -71,7 +71,7 @@ void asm_offsets(void)OFFSET (TASK_THREAD_FCSR , task_struct, thread.fstate.fcsr);DEFINE (PT_SIZE ,sizeof (struct pt_regs )); -OFFSET (PT_SEPC , pt_regs, sepc); +OFFSET (PT_XEPC , pt_regs, xepc);OFFSET (PT_RA , pt_regs, ra);OFFSET (PT_FP , pt_regs, s0);OFFSET (PT_S0 , pt_regs, s0);@@ -105,9 +105,9 @@ void asm_offsets(void)OFFSET (PT_T6 , pt_regs, t6);OFFSET (PT_GP , pt_regs, gp);OFFSET (PT_ORIG_A0 , pt_regs, orig_a0); -OFFSET (PT_SSTATUS , pt_regs, sstatus); -OFFSET (PT_SBADADDR , pt_regs, sbadaddr); -OFFSET (PT_SCAUSE , pt_regs, scause); +OFFSET (PT_XSTATUS , pt_regs, xstatus); +OFFSET (PT_XBADADDR , pt_regs, xbadaddr); +OFFSET (PT_XCAUSE , pt_regs, xcause);/* * THREAD_{F,X}* might be larger than a S-type offset can handle, but
arch/riscv/kernel/entry.S +0
-0@@ -26,14 +26,14 @@ /* * If coming from userspace, preserve the user thread pointerand load
arch/riscv/kernel/entry.S +0
-1- * the kernel thread pointer. If we came from the kernel,sscratch
arch/riscv/kernel/entry.S +1
-1- * will contain 0, and we should continue on the current TP. + * the kernel thread pointer. If we came from the kernel, thescratch
arch/riscv/kernel/entry.S +1
-0+ * register will contain 0, and we should continue on thecurrent TP.
arch/riscv/kernel/entry.S +16
-16*/ - csrrw tp, CSR_SSCRATCH, tp + csrrw tp, CSR_XSCRATCH, tp bnez tp, _save_context _restore_kernel_tpsp: - csrr tp, CSR_SSCRATCH + csrr tp, CSR_XSCRATCH REG_S sp, TASK_TI_KERNEL_SP(tp) _save_context: REG_S sp, TASK_TI_USER_SP(tp)@@ -79,16 +79,16 @@ _save_context: li t0, SR_SUM | SR_FS REG_L s0, TASK_TI_USER_SP(tp) - csrrc s1, CSR_SSTATUS, t0 - csrr s2, CSR_SEPC - csrr s3, CSR_STVAL - csrr s4, CSR_SCAUSE - csrr s5, CSR_SSCRATCH + csrrc s1, CSR_XSTATUS, t0 + csrr s2, CSR_XEPC + csrr s3, CSR_XTVAL + csrr s4, CSR_XCAUSE + csrr s5, CSR_XSCRATCH REG_S s0, PT_SP(sp) - REG_S s1, PT_SSTATUS(sp) - REG_S s2, PT_SEPC(sp) - REG_S s3, PT_SBADADDR(sp) - REG_S s4, PT_SCAUSE(sp) + REG_S s1, PT_XSTATUS(sp) + REG_S s2, PT_XEPC(sp) + REG_S s3, PT_XBADADDR(sp) + REG_S s4, PT_XCAUSE(sp) REG_S s5, PT_TP(sp) .endm@@ -97,10 +97,10 @@ _save_context: * registers from the stack. */ .macro RESTORE_ALL - REG_L a0, PT_SSTATUS(sp) - REG_L a2, PT_SEPC(sp) - csrw CSR_SSTATUS, a0 - csrw CSR_SEPC, a2 + REG_L a0, PT_XSTATUS(sp) + REG_L a2, PT_XEPC(sp) + csrw CSR_XSTATUS, a0 + csrw CSR_XEPC, a2 REG_L x1, PT_RA(sp) REG_L x3, PT_GP(sp)@@ -144,10 +144,10 @@ ENTRY(handle_exception) SAVE_ALL /* - * Set sscratch register to 0, so that if a recursive exception + * Set the scratch register to 0, so that if a recursiveexception
arch/riscv/kernel/entry.S +7
-5* occurs, the exception vector knows it came from the kernel */ - csrw CSR_SSCRATCH, x0 + csrw CSR_XSCRATCH, x0 /* Load the global pointer */ .option push@@ -167,7 +167,7 @@ ENTRY(handle_exception) tail do_IRQ 1: /* Exceptions run with interrupts enabled */ - csrs sstatus, SR_SIE + csrs CSR_XSTATUS, SR_XIE /* Handle syscalls */ li t0, EXC_SYSCALL@@ -194,7 +194,7 @@ handle_syscall: * scall instruction on sret */ addi s2, s2, 0x4 - REG_S s2, PT_SEPC(sp) + REG_S s2, PT_XEPC(sp) /* Trace syscalls, but only if requested by the user. */ REG_L t0, TASK_TI_FLAGS(tp) andi t0, t0, _TIF_SYSCALL_WORK@@ -221,9 +221,15 @@ ret_from_syscall: bnez t0, handle_syscall_trace_exit ret_from_exception: - REG_L s0, PT_SSTATUS(sp) - csrc sstatus, SR_SIE + REG_L s0, PT_XSTATUS(sp) + csrc CSR_XSTATUS, SR_XIE +#ifdef CONFIG_M_MODE + /* the MPP value is too large to be used as an immediate argfor addi */
arch/riscv/kernel/entry.S +4
-1+ li t0, SR_MPP + and s0, s0, t0 +#else andi s0, s0, SR_SPP +#endif bnez s0, resume_kernel resume_userspace:@@ -237,14 +243,14 @@ resume_userspace: REG_S s0, TASK_TI_KERNEL_SP(tp) /* - * Save TP into sscratch, so we can find the kernel datastructures
arch/riscv/kernel/entry.S +1
-1- * again. + * Save TP into the scratch register , so we can find thekernel data
arch/riscv/kernel/entry.S +3
-3+ * structures again. */ - csrw CSR_SSCRATCH, tp + csrw CSR_XSCRATCH, tp restore_all: RESTORE_ALL - sret + Xret #if IS_ENABLED(CONFIG_PREEMPT) resume_kernel:@@ -265,7 +271,7 @@ work_pending: bnez s1, work_resched work_notifysig: /* Handle pending signals and notify-resume requests */ - csrs sstatus, SR_SIE /* Enable interrupts for
do_notify_resume()*/arch/riscv/kernel/entry.S +1
-0+ csrs CSR_XSTATUS, SR_XIE /* Enable interrupts for
do_notify_resume()*/arch/riscv/kernel/entry.S +0
-0move a0, sp /* pt_regs */ move a1, s0 /* current_thread_info->flags */ tail do_notify_resumearch/riscv/kernel/fpu.S +4
-4@@ -23,7 +23,7 @@ ENTRY(__fstate_save) li a2, TASK_THREAD_F0 add a0, a0, a2 li t1, SR_FS - csrs sstatus, t1 + csrs CSR_XSTATUS, t1 frcsr t0 fsd f0, TASK_THREAD_F0_F0(a0) fsd f1, TASK_THREAD_F1_F0(a0)@@ -58,7 +58,7 @@ ENTRY(__fstate_save) fsd f30, TASK_THREAD_F30_F0(a0) fsd f31, TASK_THREAD_F31_F0(a0) sw t0, TASK_THREAD_FCSR_F0(a0) - csrc sstatus, t1 + csrc CSR_XSTATUS, t1 ret ENDPROC(__fstate_save)@@ -67,7 +67,7 @@ ENTRY(__fstate_restore) add a0, a0, a2 li t1, SR_FS lw t0, TASK_THREAD_FCSR_F0(a0) - csrs sstatus, t1 + csrs CSR_XSTATUS, t1 fld f0, TASK_THREAD_F0_F0(a0) fld f1, TASK_THREAD_F1_F0(a0) fld f2, TASK_THREAD_F2_F0(a0)@@ -101,6 +101,6 @@ ENTRY(__fstate_restore) fld f30, TASK_THREAD_F30_F0(a0) fld f31, TASK_THREAD_F31_F0(a0) fscsr t0 - csrc sstatus, t1 + csrc CSR_XSTATUS, t1 ret ENDPROC(__fstate_restore)arch/riscv/kernel/head.S +3
-3@@ -15,8 +15,8 @@ __INIT ENTRY(_start) /* Mask all interrupts */ - csrw CSR_SIE, zero - csrw CSR_SIP, zero + csrw CSR_XIE, zero + csrw CSR_XIP, zero /* Load the global pointer */ .option push@@ -29,7 +29,7 @@ ENTRY(_start) * floating point in kernel space */ li t0, SR_FS - csrc sstatus, t0 + csrc CSR_XSTATUS, t0 /* Pick one hart to run the main boot sequence */ la a3, hart_lottery@@ -78,7 +78,7 @@ relocate: /* Point stvec to virtual address of intruction after satpwrite */
arch/riscv/kernel/head.S +1
-1la a0, 1f add a0, a0, a1 - csrw CSR_STVEC, a0 + csrw CSR_XTVEC, a0 /* Compute satp for kernel page tables, but don't load it yet*/
arch/riscv/kernel/head.S +2
-2la a2, swapper_pg_dir@@ -101,7 +101,7 @@ relocate: 1: /* Set trap vector to spin forever to help debug */ la a0, .Lsecondary_park - csrw CSR_STVEC, a0 + csrw CSR_XTVEC, a0 /* Reload the global pointer */ .option push@@ -127,7 +127,7 @@ relocate: /* Set trap vector to spin forever to help debug */ la a3, .Lsecondary_park - csrw CSR_STVEC, a3 + csrw CSR_XTVEC, a3 slli a3, a0, LGREG la a1, __cpu_up_stack_pointerarch/riscv/kernel/irq.c +1
-1@@ -29,7 +29,7 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)struct pt_regs *old_regs =set_irq_regs (regs);irq_enter (); -switch (regs->scause & ~SCAUSE_IRQ_FLAG ) { +switch (regs->xcause & ~XCAUSE_IRQ_FLAG ) {case INTERRUPT_CAUSE_TIMER :riscv_timer_interrupt ();arch/riscv/kernel/irq.c +1
-1break ;@@ -46,7 +46,7 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)handle_arch_irq (regs);break ;default : -pr_alert ("unexpected interrupt cause 0x%lx" , regs- >scause); +pr_alert ("unexpected interrupt cause 0x%lx" , regs- >xcause);arch/riscv/kernel/irq.c +0
-0BUG (); }irq_exit ();arch/riscv/kernel/process.c +1
-1@@ -34,7 +34,7 @@ void show_regs(struct pt_regs *regs)show_regs_print_info (KERN_DEFAULT );pr_cont ("sepc: " REG_FMT " ra : " REG_FMT " sp : " REG_FMT "\n" , - regs->sepc, regs->ra, regs->sp); + regs->xepc, regs->ra, regs->sp); pr_cont(" gp : " REG_FMT " tp : " REG_FMT " t0 : " REG_FMT "\n",arch/riscv/kernel/process.c +0
-0regs->gp, regs->tp, regs->t0); pr_cont(" t1 : " REG_FMT " t2 : " REG_FMT " s0 : " REG_FMT"\n",
arch/riscv/kernel/process.c +5
-5@@ -56,17 +56,17 @@ void show_regs(struct pt_regs *regs)pr_cont (" t5 : " REG_FMT " t6 : " REG_FMT "\n" , regs->t5, regs->t6); -pr_cont ("sstatus: " REG_FMT " sbadaddr: " REG_FMT " scause: " REG_FMT "\n" , - regs->sstatus, regs->sbadaddr, regs->scause); +pr_cont ("status: " REG_FMT " badaddr: " REG_FMT " cause: " REG_FMT "\n" , + regs->xstatus, regs->xbadaddr, regs->xcause); }void start_thread (struct pt_regs *regs,unsigned long pc,unsigned long sp) { - regs->sstatus =SR_SPIE ; + regs->xstatus =SR_XPIE ;if (has_fpu) - regs->sstatus |=SR_FS_INITIAL ; - regs->sepc = pc; + regs->xstatus |=SR_FS_INITIAL ; + regs->xepc = pc; regs->sp = sp;arch/riscv/kernel/process.c +0
-1set_fs (USER_DS ); }@@ -101,7 +101,8 @@ int copy_thread(unsigned long clone_flags,unsigned long usp, const register unsigned long gp __asm__ ("gp");memset (childregs,0 ,sizeof (struct pt_regs )); childregs->gp = gp; - childregs->sstatus =SR_SPP |SR_SPIE ;/* Supervisor, irqs on */
arch/riscv/kernel/process.c +2
-0+/* Supervisor/Machine, irqs on: */ + childregs->xstatus =SR_XPP |SR_XPIE ; p->thread.ra = (unsigned long )ret_from_kernel_thread; p->thread.s[0 ] = usp;/* fn */ arch/riscv/kernel/signal.c +1
-1@@ -124,7 +124,7 @@ SYSCALL_DEFINE0(rt_sigreturn)pr_info_ratelimited ("%s[%d]: bad frame in %s: frame=%p pc=%p sp=%p\n", task->comm,task_pid_nr (task), __func__, - frame, (void *)regs->sepc, (void *)regs->sp); + frame, (void *)regs->xepc, (void *)regs->sp); }force_sig (SIGSEGV , task);arch/riscv/kernel/signal.c +0
-0return 0 ;@@ -199,7 +199,7 @@ static int setup_rt_frame(struct ksignal *ksig,sigset_t *set, * We always pass siginfo and mcontext, regardless ofSA_SIGINFO , * since some things rely on this (e.g. glibc's
debug/segfault.c).arch/riscv/kernel/signal.c +1
-1*/ - regs->sepc = (unsigned long )ksig->ka.sa.sa_handler; + regs->xepc = (unsigned long )ksig->ka.sa.sa_handler; regs->sp = (unsigned long )frame; regs->a0 = ksig->sig;/* a0: signal number */
regs->a1= (unsigned long)(&frame->info); /* a1: siginfo
pointer */arch/riscv/kernel/signal.c +1
-1@@ -208,7 +208,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,#if DEBUG_SIG pr_info ("SIG deliver (%s:%d): sig=%d pc=%p ra=%p sp=%p\n" , current->comm,task_pid_nr (current), ksig->sig, - (void *)regs->sepc, (void *)regs->ra, frame); + (void *)regs->xepc, (void *)regs->ra, frame);#endif arch/riscv/kernel/signal.c +1
-1return 0 ;@@ -220,10 +220,9 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)int ret;/* Are we from a system call? */ -if (regs->scause ==EXC_SYSCALL ) { +if (regs->xcause ==EXC_SYSCALL ) {/* Avoid additional syscall restarting via
ret_from_exception*/arch/riscv/kernel/signal.c +2
-3- regs->scause =-1UL ; - + regs->xcause =-1UL ;/* If so, check system call restarting.. */ switch (regs->a0) {case -ERESTART_RESTARTBLOCK :@@ -239,7 +238,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)/* fallthrough */ case -ERESTARTNOINTR : regs->a0 = regs->orig_a0; - regs->sepc -=0x4 ; + regs->xepc -=0x4 ;break ; }arch/riscv/kernel/signal.c +1
-1}@@ -261,9 +260,9 @@ static void do_signal(struct pt_regs *regs) }/* Did we come from a system call? */ -if (regs->scause ==EXC_SYSCALL ) { +if (regs->xcause ==EXC_SYSCALL ) {/* Avoid additional syscall restarting via
ret_from_exception*/arch/riscv/kernel/signal.c +3
-3- regs->scause =-1UL ; + regs->xcause =-1UL ;/* Restart the system call - no handlers present */ switch (regs->a0) {@@ -271,12 +270,12 @@ static void do_signal(struct pt_regs *regs)case -ERESTARTSYS :case -ERESTARTNOINTR : regs->a0 = regs->orig_a0; - regs->sepc -=0x4 ; + regs->xepc -=0x4 ;break ;case -ERESTART_RESTARTBLOCK : regs->a0 = regs->orig_a0; regs->a7 = __NR_restart_syscall; - regs->sepc -=0x4 ; + regs->xepc -=0x4 ;break ; } }arch/riscv/kernel/traps.c +1
-1@@ -40,7 +40,7 @@ void die(struct pt_regs *regs, const char *str)print_modules ();show_regs (regs); - ret =notify_die (DIE_OOPS , str, regs,0 , regs->scause, SIGSEGV); + ret =notify_die (DIE_OOPS , str, regs,0 , regs->xcause,SIGSEGV );arch/riscv/kernel/traps.c +0
-1bust_spinlocks (0 );add_taint (TAINT_DIE ,LOCKDEP_NOW_UNRELIABLE );@@ -84,7 +84,7 @@ static void do_trap_error(struct pt_regs *regs, int signo, int code,#define DO_ERROR_INFO (name, signo, code, str) \ asmlinkage void name(struct pt_regs *regs) \ { \ -do_trap_error (regs, signo, code, regs->sepc,"Oops - " str);\
arch/riscv/kernel/traps.c +1
-0+do_trap_error (regs, signo, code, regs->xepc,"Oops - " str);\
}DO_ERROR_INFO(do_trap_unknown,
arch/riscv/kernel/traps.c +2
-2@@ -127,12 +127,12 @@ asmlinkage void do_trap_break(struct pt_regs *regs)if (!user_mode (regs)) {enum bug_trap_type type; - type =report_bug (regs->sepc, regs); + type =report_bug (regs->xepc, regs);switch (type) {case BUG_TRAP_TYPE_NONE :break ; case BUG_TRAP_TYPE_WARN: - regs->sepc +=get_break_insn_length (regs- >sepc); + regs->xepc += get_break_insn_length(regs- >xepc);arch/riscv/kernel/traps.c +1
-1break ;case BUG_TRAP_TYPE_BUG :die (regs,"Kernel BUG" );@@ -140,7 +140,7 @@ asmlinkage void do_trap_break(struct pt_regs *regs) }#endif /* CONFIG_GENERIC_BUG */ -force_sig_fault (SIGTRAP ,TRAP_BRKPT , (void __user *)(regs- >sepc), current); +force_sig_fault (SIGTRAP ,TRAP_BRKPT , (void __user *)(regs- >xepc), current);}
#ifdef
CONFIG_GENERIC_BUGarch/riscv/kernel/traps.c +0
-0@@ -165,9 +165,9 @@ void __init trap_init(void)* Set sup0 scratch register to 0, indicating to exception vector
arch/riscv/kernel/traps.c +3
-3* that we are presently executing in the kernel */ -csr_write (CSR_SSCRATCH ,0 ); +csr_write (CSR_XSCRATCH ,0 );/* Set the exception vector address */ -csr_write (CSR_STVEC , &handle_exception); +csr_write (CSR_XTVEC , &handle_exception);/* Enable all interrupts */ -csr_write (CSR_SIE ,-1 ); +csr_write (CSR_XIE ,-1 ); }arch/riscv/lib/uaccess.S +6
-6@@ -18,7 +18,7 @@ ENTRY(__asm_copy_from_user) /* Enable access to user memory */ li t6, SR_SUM - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 add a3, a1, a2 /* Use word-oriented copy only if low-order bits match */@@ -47,7 +47,7 @@ ENTRY(__asm_copy_from_user) 3: /* Disable access to user memory */ - csrc sstatus, t6 + csrc CSR_XSTATUS, t6 li a0, 0 ret 4: /* Edge case: unalignment */@@ -72,7 +72,7 @@ ENTRY(__clear_user) /* Enable access to user memory */ li t6, SR_SUM - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 add a3, a0, a1 addi t0, a0, SZREG-1@@ -94,7 +94,7 @@ ENTRY(__clear_user) 3: /* Disable access to user memory */ - csrc sstatus, t6 + csrc CSR_XSTATUS, t6 li a0, 0 ret 4: /* Edge case: unalignment */@@ -114,11 +114,11 @@ ENDPROC(__clear_user) /* Fixup code for __copy_user(10) and __clear_user(11) */ 10: /* Disable access to user memory */ - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 mv a0, a2 ret 11: - csrs sstatus, t6 + csrs CSR_XSTATUS, t6 mv a0, a1 ret .previousarch/riscv/mm/extable.c +2
-2@@ -15,9 +15,9 @@ int fixup_exception(struct pt_regs *regs) {const struct exception_table_entry *fixup; - fixup =search_exception_tables (regs->sepc); + fixup =search_exception_tables (regs->xepc);if (fixup) { - regs->sepc = fixup->fixup; + regs->xepc = fixup->fixup;return 1 ; }return 0 ;arch/riscv/mm/fault.c +2
-2@@ -32,8 +32,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs)int code =SEGV_MAPERR ;vm_fault_t fault; - cause = regs->scause; - addr = regs->sbadaddr; + cause = regs->xcause; + addr = regs->xbadaddr; tsk = current; mm = tsk->mm;@@ -51,7 +51,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs) goto vmalloc_fault;/* Enable interrupts if they were enabled in the parent context. */
arch/riscv/mm/fault.c +1
-1-if (likely (regs->sstatus &SR_SPIE )) +if (likely (regs->xstatus &SR_XPIE ))local_irq_enable ();/* drivers/clocksource/timer-riscv.c +3
-3@@ -28,7 +28,7 @@static int riscv_clock_next_event (unsigned long delta,struct clock_event_device *ce) { -csr_set (sie,SIE_STIE ); +csr_set (CSR_XIE ,XIE_XTIE );sbi_set_timer (get_cycles64 () + delta);return 0 ; }@@ -70,13 +70,13 @@ static int riscv_timer_starting_cpu(unsigned int cpu) ce->cpumask = cpumask_of(cpu);clockevents_config_and_register (ce, riscv_timebase,100 ,0x7fffffff ); -csr_set (sie,SIE_STIE ); +csr_set (CSR_XIE ,XIE_XTIE );return 0 ; }static int riscv_timer_dying_cpu (unsigned int cpu) { -csr_clear (sie,SIE_STIE ); +csr_clear (CSR_XIE ,XIE_XTIE );return 0 ;}
drivers/clocksource/timer-riscv.c +1
-1@@ -85,7 +85,7 @@ void riscv_timer_interrupt(void) {struct clock_event_device *evdev =this_cpu_ptr (&riscv_clock_event); -csr_clear (sie,SIE_STIE ); +csr_clear (CSR_XIE ,XIE_XTIE ); evdev->event_handler (evdev); }drivers/irqchip/irq- renamed from drivers/irqchip/irq-sifive-plic.c +0
-0
sifive-plic.c
indexc72c036aea76..4ee96ac90ea4100644drivers/irqchip/irq-sifive-plic.c +1
-1@@ -179,7 +179,7 @@ static void plic_handle_irq(struct pt_regs *regs)WARN_ON_ONCE (!handler->present); -csr_clear (sie,SIE_SEIE ); +csr_clear (CSR_XIE ,XIE_XEIE );while ((hwirq =readl (claim))) {int irq =irq_find_mapping (plic_irqdomain, hwirq);
drivers/irqchip/irq-sifive-plic.c static void plic_handle_irq(struct pt_regs *regs) · line 195
Quoted 7 lines
drivers/irqchip/irq-sifive-plic.c +1
-1@@ -190,7 +190,7 @@ static void plic_handle_irq(struct pt_regs *regs)generic_handle_irq (irq);writel (hwirq, claim); } -csr_set (sie,SIE_SEIE ); +csr_set (CSR_XIE ,XIE_XEIE ); }
Apart from the nits,
Quoted 1 line
drivers/irqchip/irq-sifive-plic.c +0
-0/*
Signature · 2 lines
Regards, Atish
PATCH 8/17 riscv: improve the default power off implementation
In reply to Christoph HellwigOnly call the SBI code if we are not running in M mode, and if we didn't do the SBI call, or it didn't succeed call wfi in a loop to at least save some power.
--- arch/riscv/kernel/reset.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
arch/riscv/kernel/reset.c +4 -1
@@ -8,8 +8,11 @@static void default_power_off (void ) { +#ifndef CONFIG_M_MODE sbi_shutdown (); -while (1 ); +#endif +while (1 ) +wait_for_interrupt (); }void (*pm_power_off)(void ) = default_power_off;
Signature · 1 line
2.20.1
Re: [PATCH 08/17] riscv: improve the default power off implementation
Quoted 17 lines · Christoph Hellwig
Only call the SBI code if we are not running in M mode, and if we didn't
do the SBI call, or it didn't succeed call wfi in a loop to at least save some power.Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/kernel/reset.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)arch/riscv/kernel/reset.c +0
-0@@ -8,8 +8,11 @@static void default_power_off (void )
arch/riscv/kernel/reset.c line 18
Quoted 10 lines
arch/riscv/kernel/reset.c +4
-1{ +#ifndef CONFIG_M_MODE sbi_shutdown (); -while (1 ); +#endif +while (1 ) +wait_for_interrupt (); }void (*pm_power_off)(void ) = default_power_off;
Regards,
Atish
PATCH 9/17 riscv: provide a flat entry loader
In reply to Christoph HellwigThis allows just loading the kernel at a pre-set address without qemu going bonkers trying to map the ELF file.
--- arch/riscv/Makefile | 13 +++++++++---- arch/riscv/boot/Makefile | 7 ++++++- arch/riscv/boot/loader.S | 8 ++++++++ arch/riscv/boot/loader.lds | 14 ++++++++++++++ 4 files changed, 37 insertions(+), 5 deletions(-) create mode 100644 arch/riscv/boot/loader.S create mode 100644 arch/riscv/boot/loader.lds
arch/riscv/Makefile +9 -4
@@ -84,13 +84,18 @@ PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ -all: Image.gz +ifeq ($(CONFIG_M_MODE),y) +KBUILD_IMAGE := $(boot)/loader +else +KBUILD_IMAGE := $(boot)/Image.gz +endif +BOOT_TARGETS := Image Image.gz loader -Image: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +all: $(notdir $(KBUILD_IMAGE)) -Image.%: Image +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + @$(kecho) ' Kernel: $(boot)/$@ is ready' zinstall install: $(Q)$(MAKE) $(build)=$(boot) $@
arch/riscv/boot/Makefile +6 -1
@@ -16,7 +16,7 @@ OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S -targets := Image +targets := Image loader $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy)
@@ -24,6 +24,11 @@ $(obj)/Image: vmlinux FORCE $(obj)/Image.gz: $(obj)/Image FORCE $(call if_changed,gzip) +loader.o: $(src)/loader.S $(obj)/Image + +$(obj)/loader: $(obj)/loader.o $(obj)/Image FORCE + $(Q)$(LD) -T $(src)/loader.lds -o $@ $(obj)/loader.o + install: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)"
arch/riscv/boot/loader.S new file +8 -0
@@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 + + .align 4 + .section .payload, "ax", %progbits + .globl _start +_start: + .incbin "arch/riscv/boot/Image" +
arch/riscv/boot/loader.lds new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +OUTPUT_ARCH(riscv) +ENTRY(_start) + +SECTIONS +{ + . = 0x80000000; + + .payload : { + *(.payload) + . = ALIGN(8); + } +}
Signature · 1 line
2.20.1
PATCH 10/17 riscv: read the hart ID from mhartid on boot
In reply to Christoph HellwigFrom: Damien Le Moal <[email protected]>
When in M-Mode, we can use the mhartid CSR to get the ID of the running HART. Doing so, direct M-Mode boot without firmware is possible.
--- arch/riscv/kernel/head.S | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/riscv/kernel/head.S +8 -0
@@ -18,6 +18,14 @@ ENTRY(_start) csrw CSR_XIE, zero csrw CSR_XIP, zero +#ifdef CONFIG_M_MODE + /* + * The hartid in a0 is expected later on, and we have no firmware + * to hand it to us. + */ + csrr a0, mhartid +#endif + /* Load the global pointer */ .option push .option norelax
Signature · 1 line
2.20.1
Re: [PATCH 10/17] riscv: read the hart ID from mhartid on boot
Quoted 24 lines · Christoph Hellwig
From: Damien Le Moal <[email protected]>
When in M-Mode, we can use the mhartid CSR to get the ID of the running
HART. Doing so, direct M-Mode boot without firmware is possible.Signed-off-by Damien Le Moal <[email protected]>Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/kernel/head.S | 8 ++++++++ 1 file changed, 8 insertions(+)arch/riscv/kernel/head.S +3
-0@@ -18,6 +18,14 @@ ENTRY(_start) csrw CSR_XIE, zero csrw CSR_XIP, zero +#ifdef CONFIG_M_MODE + /* + * The hartid in a0 is expected later on, and we have nofirmware
arch/riscv/kernel/head.S ENTRY(_start) · line 26
Quoted 3 lines
arch/riscv/kernel/head.S +3
-0+ * to hand it to us. + */ + csrr a0, mhartid
I think you should add SR_MHARTID and use that instead of direct csr name.
The following patch replaced all occurrence of csr name usage from kernel with CSR numbers.
https://patchwork.kernel.org/patch/10916293/
With that change,
Quoted 5 lines
arch/riscv/kernel/head.S +2
-0+#endif + /* Load the global pointer */ .option push .option norelax
Signature · 2 lines
Regards, Atish
PATCH 11/17 riscv: provide native clint access for M-mode
In reply to Christoph HellwigRISC-V has the concept of a cpu level interrupt controller. Part of it is expose as bits in the status registers, and 2 new CSRs per privilege level in the instruction set, but the machanisms to trigger IPIs and timer events, as well as reading the actual timer value are not specified in the RISC-V spec but usually delegated to a block of MMIO registers. This patch adds support for those MMIO registers in the timer and IPI code. For now only the SiFive layout also supported by a few other implementations is supported, but the code should be easily extensible to others in the future.
--- arch/riscv/include/asm/clint.h | 40 +++++++++++++++++++++++++++ arch/riscv/include/asm/timex.h | 17 ++++++++++++ arch/riscv/kernel/Makefile | 1 + arch/riscv/kernel/clint.c | 45 +++++++++++++++++++++++++++++++ arch/riscv/kernel/setup.c | 2 ++ arch/riscv/kernel/smp.c | 24 +++++++++++++++++ arch/riscv/kernel/smpboot.c | 3 +++ drivers/clocksource/timer-riscv.c | 16 ++++++++--- 8 files changed, 144 insertions(+), 4 deletions(-) create mode 100644 arch/riscv/include/asm/clint.h create mode 100644 arch/riscv/kernel/clint.c
arch/riscv/include/asm/clint.h new file +40 -0
@@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +#ifndef _ASM_CLINT_H +#define _ASM_CLINT_H 1 + +#include <linux/smp.h> + +#ifdef CONFIG_M_MODE +extern u32 __iomem *clint_ipi_base; +extern u64 __iomem *clint_time_val; +extern u64 __iomem *clint_time_cmp; + +void clint_init_boot_cpu (void ); + +static inline void clint_send_ipi (unsigned long hartid) +{ +writel (1 , clint_ipi_base + hartid); +} + +static inline void clint_clear_ipi (unsigned long hartid) +{ +writel (0 , clint_ipi_base + hartid); +} + +static inline u64 clint_read_timer (void ) +{ +return readq_relaxed (clint_time_val); +} + +static inline void clint_set_timer (unsigned long delta) +{ +writeq_relaxed (clint_read_timer () + delta, + clint_time_cmp +cpuid_to_hartid_map (smp_processor_id ())); +} + +#else +#define clint_init_boot_cpu () do { } while (0) +#define clint_clear_ipi (hartid) do { } while (0) +#endif /* CONFIG_M_MODE */ + +#endif /* _ASM_CLINT_H */
arch/riscv/include/asm/timex.h +17 -0
@@ -10,6 +10,22 @@typedef unsigned long cycles_t ; +#ifdef CONFIG_M_MODE + +#include <linux/io-64-nonatomic-lo-hi.h> +#include <asm/clint.h> + +static inline cycles_t get_cycles (void ) +{ +#ifdef CONFIG_64BIT +return readq_relaxed (clint_time_val); +#else +return readl_relaxed (clint_time_val); +#endif +} +#define get_cycles get_cycles + +#else /* CONFIG_M_MODE */ static inline cycles_t get_cycles_inline (void ) {cycles_t n;
@@ -40,6 +56,7 @@ static inline uint64_t get_cycles64(void)return ((u64 )hi <<32 ) | lo; }#endif +#endif /* CONFIG_M_MODE */ #define ARCH_HAS_READ_CURRENT_TIMER
arch/riscv/kernel/Makefile +1 -0
@@ -29,6 +29,7 @@ obj-y += vdso.o obj-y += cacheinfo.o obj-y += vdso/ +obj-$(CONFIG_M_MODE) += clint.o obj-$(CONFIG_FPU) += fpu.o obj-$(CONFIG_SMP) += smpboot.o obj-$(CONFIG_SMP) += smp.o
arch/riscv/kernel/clint.c new file +45 -0
45 lines not on this page · raw message
arch/riscv/kernel/setup.c +2 -0
@@ -17,6 +17,7 @@#include <linux/sched/task.h> #include <linux/swiotlb.h> +#include <asm/clint.h> #include <asm/setup.h> #include <asm/sections.h> #include <asm/pgtable.h>
@@ -67,6 +68,7 @@ void __init setup_arch(char **cmdline_p)setup_bootmem ();paging_init ();unflatten_device_tree (); +clint_init_boot_cpu ();#ifdef CONFIG_SWIOTLB swiotlb_init (1 );
arch/riscv/kernel/smp.c +24 -0
@@ -13,7 +13,9 @@#include <linux/sched.h> #include <linux/seq_file.h> #include <linux/delay.h> +#include <linux/io.h> +#include <asm/clint.h> #include <asm/sbi.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h>
@@ -78,6 +80,27 @@ static void ipi_stop(void)wait_for_interrupt (); } +#ifdef CONFIG_M_MODE +static inline void send_ipi_single (int cpu,enum ipi_message_type op) +{ +set_bit (op, &ipi_data[cpu].bits); +clint_send_ipi (cpuid_to_hartid_map (cpu)); +} + +static inline void send_ipi_mask (const struct cpumask *mask, +enum ipi_message_type op) +{ +int cpu; + +for_each_cpu (cpu, mask) +send_ipi_single (cpu, op); +} + +static inline void clear_ipi (void ) +{ +clint_clear_ipi (cpuid_to_hartid_map (smp_processor_id ())); +} +#else /* CONFIG_M_MODE */ static void send_ipi_mask (const struct cpumask *mask,enum ipi_message_type op) {int cpuid, hartid;
@@ -103,6 +126,7 @@ static inline void clear_ipi(void) {csr_clear (CSR_SIP ,SIE_SSIE ); } +#endif /* CONFIG_M_MODE */ void riscv_software_interrupt (void ) {
arch/riscv/kernel/smpboot.c +3 -0
@@ -23,6 +23,7 @@#include <linux/of.h> #include <linux/sched/task_stack.h> #include <linux/sched/mm.h> +#include <asm/clint.h> #include <asm/irq.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h>
@@ -132,6 +133,8 @@ asmlinkage void __init smp_callin(void) {struct mm_struct *mm = &init_mm; +clint_clear_ipi (cpuid_to_hartid_map (smp_processor_id ())); +/* All kernel threads share the same mm context. */ mmgrab (mm); current->active_mm = mm;
drivers/clocksource/timer-riscv.c +12 -4
@@ -24,12 +24,16 @@* operations on the current hart. There is guaranteed to be exactly one timer * per hart on all RISC-V systems. */ -static int riscv_clock_next_event (unsigned long delta,struct clock_event_device *ce) {csr_set (CSR_XIE ,XIE_XTIE ); + +#ifdef CONFIG_M_MODE +clint_set_timer (delta); +#else sbi_set_timer (get_cycles64 () + delta); +#endif return 0 ; }
@@ -45,14 +49,18 @@ static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {* within one tick of each other, so while this could technically go * backwards when hopping between CPUs, practically it won't happen. */ -static unsigned long long riscv_clocksource_rdtime (struct clocksource *cs) +static u64 riscv_sched_clock (void ) { +#ifdef CONFIG_M_MODE +return clint_read_timer (); +#else return get_cycles64 (); +#endif } -static u64 riscv_sched_clock (void ) +static unsigned long long riscv_clocksource_rdtime (struct clocksource *cs) { -return get_cycles64 (); +return riscv_sched_clock (); } static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = {
Signature · 1 line
2.20.1
PATCH 12/17 riscv: implement remote sfence.i natively for M-mode
In reply to Christoph HellwigThe RISC-V ISA only supports flushing the instruction cache for the local CPU core. For normal S-mode Linux remote flushing is offloaded to machine mode using ecalls, but for M-mode Linux we'll have to do it ourselves. Use the same implementation as all the existing open source SBI implementations by just doing an IPI to all remote cores to execute th sfence.i instruction on every live core.
--- arch/riscv/mm/cacheflush.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-)
arch/riscv/mm/cacheflush.c +27 -4
@@ -10,10 +10,35 @@#include <asm/sbi.h> +#ifdef CONFIG_M_MODE +static void ipi_remote_fence_i (void *info) +{ +return local_flush_icache_all (); +} + +void flush_icache_all (void ) +{ +on_each_cpu (ipi_remote_fence_i,NULL ,1 ); +} + +static void flush_icache_cpumask (const cpumask_t *mask) +{ +on_each_cpu_mask (mask, ipi_remote_fence_i,NULL ,1 ); +} +#else /* CONFIG_M_MODE */ void flush_icache_all (void ) {sbi_remote_fence_i (NULL ); } +static void flush_icache_cpumask (const cpumask_t *mask) +{ +cpumask_t hmask; + +cpumask_clear (&hmask); +riscv_cpuid_to_hartid_mask (mask, &hmask); +sbi_remote_fence_i (hmask.bits); +} +#endif /* CONFIG_M_MODE */ /* * Performs an icache flush for the given MM context. RISC-V has no direct
@@ -28,7 +53,7 @@ void flush_icache_all(void)void flush_icache_mm (struct mm_struct *mm,bool local) {unsigned int cpu; -cpumask_t others, hmask, *mask; +cpumask_t others, *mask;preempt_disable ();
@@ -47,9 +72,7 @@ void flush_icache_mm(struct mm_struct *mm, bool local)cpumask_andnot (&others,mm_cpumask (mm),cpumask_of (cpu)); local |=cpumask_empty (&others);if (mm != current->active_mm || !local) { -cpumask_clear (&hmask); -riscv_cpuid_to_hartid_mask (&others, &hmask); -sbi_remote_fence_i (hmask.bits); +flush_icache_cpumask (&others); }else {/* * It's assumed that at least one strongly ordered operation is
Signature · 1 line
2.20.1
PATCH 13/17 riscv: poison SBI calls for M-mode
In reply to Christoph HellwigThere is no SBI when we run in M-mode, so fail the compile for any code trying to use SBI calls.
--- arch/riscv/include/asm/sbi.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/riscv/include/asm/sbi.h +3 -1
@@ -8,6 +8,7 @@#include <linux/types.h> +#ifndef CONFIG_M_MODE #define SBI_SET_TIMER 0#define SBI_CONSOLE_PUTCHAR 1#define SBI_CONSOLE_GETCHAR 2
@@ -94,4 +95,5 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,SBI_CALL_4 (SBI_REMOTE_SFENCE_VMA_ASID , hart_mask, start, size, asid); } -#endif +#endif /* CONFIG_M_MODE */ +#endif /* _ASM_RISCV_SBI_H */
Signature · 1 line
2.20.1
PATCH 14/17 riscv: don't allow selecting SBI-based drivers for M-mode
In reply to Christoph HellwigFrom: Damien Le Moal <[email protected]>
Do not allow selecting SBI related options with MMU option not set.
--- drivers/tty/hvc/Kconfig | 2 +- drivers/tty/serial/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/tty/hvc/Kconfig +1 -1
@@ -89,7 +89,7 @@ config HVC_DCC config HVC_RISCV_SBI bool "RISC-V SBI console support" - depends on RISCV + depends on RISCV && !M_MODE select HVC_DRIVER help This enables support for console output via RISC-V SBI calls, which
drivers/tty/serial/Kconfig +1 -1
@@ -88,7 +88,7 @@ config SERIAL_EARLYCON_ARM_SEMIHOST config SERIAL_EARLYCON_RISCV_SBI bool "Early console using RISC-V SBI" - depends on RISCV + depends on RISCV && !M_MODE select SERIAL_CORE select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON
Signature · 1 line
2.20.1
PATCH 15/17 riscv: use the correct interrupt levels for M-mode
In reply to Christoph HellwigThe numerical levels for External/Timer/Software interrupts differ between S-mode and M-mode.
--- arch/riscv/kernel/irq.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
arch/riscv/kernel/irq.c +9 -3
@@ -14,9 +14,15 @@/* * Possible interrupt causes: */ -#define INTERRUPT_CAUSE_SOFTWARE IRQ_S_SOFT -#define INTERRUPT_CAUSE_TIMER IRQ_S_TIMER -#define INTERRUPT_CAUSE_EXTERNAL IRQ_S_EXT +#ifdef CONFIG_M_MODE +# define INTERRUPT_CAUSE_SOFTWARE IRQ_M_SOFT +# define INTERRUPT_CAUSE_TIMER IRQ_M_TIMER +# define INTERRUPT_CAUSE_EXTERNAL IRQ_M_EXT +#else +# define INTERRUPT_CAUSE_SOFTWARE IRQ_S_SOFT +# define INTERRUPT_CAUSE_TIMER IRQ_S_TIMER +# define INTERRUPT_CAUSE_EXTERNAL IRQ_S_EXT +#endif /* CONFIG_M_MODE */ int arch_show_interrupts (struct seq_file *p,int prec) {
Signature · 1 line
2.20.1
PATCH 16/17 riscv: clear the instruction cache and all registers when booting
In reply to Christoph HellwigWhen we get booted we want a clear slate without any leaks from previous supervisors or the firmware. Flush the instruction cache and then clear all registers to known good values. This is really important for the upcoming nommu support that runs on M-mode, but can't really harm when running in S-mode either. Vaguely based on the concepts from opensbi.
--- arch/riscv/kernel/head.S | 85 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)
arch/riscv/kernel/head.S +85 -0
@@ -11,6 +11,7 @@ #include <asm/thread_info.h> #include <asm/page.h> #include <asm/csr.h> +#include <asm/hwcap.h> __INIT ENTRY(_start)
@@ -19,6 +20,12 @@ ENTRY(_start) csrw CSR_XIP, zero #ifdef CONFIG_M_MODE + /* flush the instruction cache */ + fence.i + + /* Reset all registers except ra, a0, a1 */ + call reset_regs + /* * The hartid in a0 is expected later on, and we have no firmware * to hand it to us.
@@ -168,6 +175,84 @@ relocate: j .Lsecondary_park END(_start) +#ifdef CONFIG_M_MODE +ENTRY(reset_regs) + li sp, 0 + li gp, 0 + li tp, 0 + li t0, 0 + li t1, 0 + li t2, 0 + li s0, 0 + li s1, 0 + li a2, 0 + li a3, 0 + li a4, 0 + li a5, 0 + li a6, 0 + li a7, 0 + li s2, 0 + li s3, 0 + li s4, 0 + li s5, 0 + li s6, 0 + li s7, 0 + li s8, 0 + li s9, 0 + li s10, 0 + li s11, 0 + li t3, 0 + li t4, 0 + li t5, 0 + li t6, 0 + csrw sscratch, 0 + +#ifdef CONFIG_FPU + csrr t0, misa + andi t0, t0, (COMPAT_HWCAP_ISA_F | COMPAT_HWCAP_ISA_D) + bnez t0, .Lreset_regs_done + + li t1, SR_FS + csrs sstatus, t1 + fmv.s.x f0, zero + fmv.s.x f1, zero + fmv.s.x f2, zero + fmv.s.x f3, zero + fmv.s.x f4, zero + fmv.s.x f5, zero + fmv.s.x f6, zero + fmv.s.x f7, zero + fmv.s.x f8, zero + fmv.s.x f9, zero + fmv.s.x f10, zero + fmv.s.x f11, zero + fmv.s.x f12, zero + fmv.s.x f13, zero + fmv.s.x f14, zero + fmv.s.x f15, zero + fmv.s.x f16, zero + fmv.s.x f17, zero + fmv.s.x f18, zero + fmv.s.x f19, zero + fmv.s.x f20, zero + fmv.s.x f21, zero + fmv.s.x f22, zero + fmv.s.x f23, zero + fmv.s.x f24, zero + fmv.s.x f25, zero + fmv.s.x f26, zero + fmv.s.x f27, zero + fmv.s.x f28, zero + fmv.s.x f29, zero + fmv.s.x f30, zero + fmv.s.x f31, zero + csrw fcsr, 0 +#endif /* CONFIG_FPU */ +.Lreset_regs_done: + ret +END(reset_regs) +#endif /* CONFIG_M_MODE */ + __PAGE_ALIGNED_BSS /* Empty zero page */ .balign PAGE_SIZE
Signature · 1 line
2.20.1
Re: [PATCH 16/17] riscv: clear the instruction cache and all registers when booting
Quoted 8 lines · Christoph Hellwig
When we get booted we want a clear slate without any leaks from previous
supervisors or the firmware. Flush the instruction cache and then clear
all registers to known good values. This is really important for the upcoming nommu support that runs on M-mode, but can't really harm when
running in S-mode either.
That means it should be done for S-mode as well. Right ? I see the reset code is enabled only for M-mode only.
Quoted 119 lines
Vaguely based on the concepts from opensbi.
Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/kernel/head.S | 85 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)arch/riscv/kernel/head.S +7
-0@@ -11,6 +11,7 @@ #include <asm/thread_info.h> #include <asm/page.h> #include <asm/csr.h> +#include <asm/hwcap.h> __INIT ENTRY(_start)@@ -19,6 +20,12 @@ ENTRY(_start) csrw CSR_XIP, zero #ifdef CONFIG_M_MODE + /* flush the instruction cache */ + fence.i + + /* Reset all registers except ra, a0, a1 */ + call reset_regs + /* * The hartid in a0 is expected later on, and we have nofirmware
arch/riscv/kernel/head.S +78
-0* to hand it to us.@@ -168,6 +175,84 @@ relocate: j .Lsecondary_park END(_start) +#ifdef CONFIG_M_MODE +ENTRY(reset_regs) + li sp, 0 + li gp, 0 + li tp, 0 + li t0, 0 + li t1, 0 + li t2, 0 + li s0, 0 + li s1, 0 + li a2, 0 + li a3, 0 + li a4, 0 + li a5, 0 + li a6, 0 + li a7, 0 + li s2, 0 + li s3, 0 + li s4, 0 + li s5, 0 + li s6, 0 + li s7, 0 + li s8, 0 + li s9, 0 + li s10, 0 + li s11, 0 + li t3, 0 + li t4, 0 + li t5, 0 + li t6, 0 + csrw sscratch, 0 + +#ifdef CONFIG_FPU + csrr t0, misa + andi t0, t0, (COMPAT_HWCAP_ISA_F | COMPAT_HWCAP_ISA_D) + bnez t0, .Lreset_regs_done + + li t1, SR_FS + csrs sstatus, t1 + fmv.s.x f0, zero + fmv.s.x f1, zero + fmv.s.x f2, zero + fmv.s.x f3, zero + fmv.s.x f4, zero + fmv.s.x f5, zero + fmv.s.x f6, zero + fmv.s.x f7, zero + fmv.s.x f8, zero + fmv.s.x f9, zero + fmv.s.x f10, zero + fmv.s.x f11, zero + fmv.s.x f12, zero + fmv.s.x f13, zero + fmv.s.x f14, zero + fmv.s.x f15, zero + fmv.s.x f16, zero + fmv.s.x f17, zero + fmv.s.x f18, zero + fmv.s.x f19, zero + fmv.s.x f20, zero + fmv.s.x f21, zero + fmv.s.x f22, zero + fmv.s.x f23, zero + fmv.s.x f24, zero + fmv.s.x f25, zero + fmv.s.x f26, zero + fmv.s.x f27, zero + fmv.s.x f28, zero + fmv.s.x f29, zero + fmv.s.x f30, zero + fmv.s.x f31, zero + csrw fcsr, 0 +#endif /* CONFIG_FPU */ +.Lreset_regs_done: + ret +END(reset_regs) +#endif /* CONFIG_M_MODE */ + __PAGE_ALIGNED_BSS /* Empty zero page */ .balign PAGE_SIZE
Signature · 2 lines
Regards, Atish
Re: [PATCH 16/17] riscv: clear the instruction cache and all registers when booting
Quoted 82 lines · Atish Patra
Quoted 8 lines · Christoph Hellwig
When we get booted we want a clear slate without any leaks from previous
supervisors or the firmware. Flush the instruction cache and then clear
all registers to known good values. This is really important for the upcoming nommu support that runs on M-mode, but can't really harm when
running in S-mode either.That means it should be done for S-mode as well. Right ? I see the reset code is enabled only for M-mode only.
Quoted 69 lines
Vaguely based on the concepts from opensbi.
Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/kernel/head.S | 85 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)arch/riscv/kernel/head.S +7
-0@@ -11,6 +11,7 @@ #include <asm/thread_info.h> #include <asm/page.h> #include <asm/csr.h> +#include <asm/hwcap.h> __INIT ENTRY(_start)@@ -19,6 +20,12 @@ ENTRY(_start) csrw CSR_XIP, zero #ifdef CONFIG_M_MODE + /* flush the instruction cache */ + fence.i + + /* Reset all registers except ra, a0, a1 */ + call reset_regs + /* * The hartid in a0 is expected later on, and we have nofirmware
arch/riscv/kernel/head.S +31
-0* to hand it to us.@@ -168,6 +175,84 @@ relocate: j .Lsecondary_park END(_start) +#ifdef CONFIG_M_MODE +ENTRY(reset_regs) + li sp, 0 + li gp, 0 + li tp, 0 + li t0, 0 + li t1, 0 + li t2, 0 + li s0, 0 + li s1, 0 + li a2, 0 + li a3, 0 + li a4, 0 + li a5, 0 + li a6, 0 + li a7, 0 + li s2, 0 + li s3, 0 + li s4, 0 + li s5, 0 + li s6, 0 + li s7, 0 + li s8, 0 + li s9, 0 + li s10, 0 + li s11, 0 + li t3, 0 + li t4, 0 + li t5, 0 + li t6, 0 + csrw sscratch, 0
Quoted 8 lines
arch/riscv/kernel/head.S relocate: · line 216
Quoted 8 lines
arch/riscv/kernel/head.S +8
-0+ +#ifdef CONFIG_FPU + csrr t0, misa + andi t0, t0, (COMPAT_HWCAP_ISA_F | COMPAT_HWCAP_ISA_D) + bnez t0, .Lreset_regs_done + + li t1, SR_FS + csrs sstatus, t1
You need to check that the write stuck and branch around the FP instructions. Specifically, CONFIG_FPU means there may be an FPU, not there's definately an FPU. You should also turn the FPU back off after zeroing the state.
Quoted 46 lines
Quoted 42 lines
arch/riscv/kernel/head.S +39
-0+ fmv.s.x f0, zero + fmv.s.x f1, zero + fmv.s.x f2, zero + fmv.s.x f3, zero + fmv.s.x f4, zero + fmv.s.x f5, zero + fmv.s.x f6, zero + fmv.s.x f7, zero + fmv.s.x f8, zero + fmv.s.x f9, zero + fmv.s.x f10, zero + fmv.s.x f11, zero + fmv.s.x f12, zero + fmv.s.x f13, zero + fmv.s.x f14, zero + fmv.s.x f15, zero + fmv.s.x f16, zero + fmv.s.x f17, zero + fmv.s.x f18, zero + fmv.s.x f19, zero + fmv.s.x f20, zero + fmv.s.x f21, zero + fmv.s.x f22, zero + fmv.s.x f23, zero + fmv.s.x f24, zero + fmv.s.x f25, zero + fmv.s.x f26, zero + fmv.s.x f27, zero + fmv.s.x f28, zero + fmv.s.x f29, zero + fmv.s.x f30, zero + fmv.s.x f31, zero + csrw fcsr, 0 +#endif /* CONFIG_FPU */ +.Lreset_regs_done: + ret +END(reset_regs) +#endif /* CONFIG_M_MODE */ + __PAGE_ALIGNED_BSS /* Empty zero page */ .balign PAGE_SIZESignature · 2 lines
Regards, Atish
Re: [PATCH 16/17] riscv: clear the instruction cache and all registers when booting
Quoted 5 lines · Palmer Dabbelt
Quoted 1 line
arch/riscv/kernel/head.S relocate: · line 216
Quoted 1 line
arch/riscv/kernel/head.S +1
-0+ csrs sstatus, t1You need to check that the write stuck and branch around the FP instructions. Specifically,
CONFIG_FPUmeans there may be an FPU, not there's definately an FPU. You should also turn the FPU back off after zeroing the state.
Well, that is why we check the hwcaps from misa just above and skip this fp reg clearing if it doesn't contain the 'F' or 'D' extension.
The caller disables the FPU a few instructions later:
/*
* Disable FPU to detect illegal usage of
* floating point in kernel space
*/
li t0, SR_FS
csrc CSR_XSTATUS, t0
Re: [PATCH 16/17] riscv: clear the instruction cache and all registers when booting
In reply to Atish PatraQuoted 1 line · Atish Patra
That means it should be done for S-mode as well. Right ?
For S-mode the bootloader/sbi should take care of it.
PATCH 17/17 riscv: add nommu support
In reply to Christoph HellwigThe kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware.
Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation:
- The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack.
In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line:
qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0
Contains contributions from Damien Le Moal <[email protected]>.
--- arch/riscv/Kconfig | 24 +++++--- arch/riscv/configs/nommu_virt_defconfig | 78 +++++++++++++++++++++++++ arch/riscv/include/asm/elf.h | 4 +- arch/riscv/include/asm/futex.h | 6 ++ arch/riscv/include/asm/io.h | 4 ++ arch/riscv/include/asm/mmu.h | 3 + arch/riscv/include/asm/page.h | 12 +++- arch/riscv/include/asm/pgalloc.h | 2 + arch/riscv/include/asm/pgtable.h | 38 ++++++++---- arch/riscv/include/asm/tlbflush.h | 7 ++- arch/riscv/include/asm/uaccess.h | 4 ++ arch/riscv/kernel/Makefile | 3 +- arch/riscv/kernel/entry.S | 11 ++++ arch/riscv/kernel/head.S | 6 ++ arch/riscv/kernel/signal.c | 17 +++++- arch/riscv/lib/Makefile | 8 +-- arch/riscv/mm/Makefile | 3 +- arch/riscv/mm/cacheflush.c | 2 + arch/riscv/mm/context.c | 2 + arch/riscv/mm/init.c | 2 + 20 files changed, 200 insertions(+), 36 deletions(-) create mode 100644 arch/riscv/configs/nommu_virt_defconfig
arch/riscv/Kconfig +16 -8
@@ -26,13 +26,13 @@ config RISCV select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER + select GENERIC_STRNCPY_FROM_USER if MMU + select GENERIC_STRNLEN_USER if MMU select GENERIC_SMP_IDLE_THREAD select GENERIC_ATOMIC64 if !64BIT select HAVE_ARCH_AUDITSYSCALL select HAVE_MEMBLOCK_NODE_MAP - select HAVE_DMA_CONTIGUOUS + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_PERF_EVENTS select HAVE_SYSCALL_TRACEPOINTS
@@ -47,6 +47,7 @@ config RISCV select PCI_DOMAINS_GENERIC if PCI select PCI_MSI if PCI select RISCV_TIMER + select UACCESS_MEMCPY if !MMU select GENERIC_IRQ_MULTI_HANDLER select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_MMIOWB
@@ -55,9 +56,14 @@ config RISCV # set if we run in machine mode, cleared if we run in supervisor mode config M_MODE bool + default y if !MMU config MMU - def_bool y + bool "MMU-based Paged Memory Management Support" + default y + help + Select if you want MMU-based virtualised addressing space + support by paged memory management. If unsure, say 'Y'. config ZONE_DMA32 bool
@@ -66,6 +72,7 @@ config ZONE_DMA32 config PAGE_OFFSET hex default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB + default 0x80000000 if 64BIT && !MMU default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
@@ -93,7 +100,7 @@ config GENERIC_HWEIGHT def_bool y config FIX_EARLYCON_MEM - def_bool y + def_bool CONFIG_MMU config PGTABLE_LEVELS int
@@ -116,6 +123,7 @@ config ARCH_RV32I select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 select GENERIC_LIB_UCMPDI2 + select MMU config ARCH_RV64I bool "RV64I"
@@ -124,9 +132,9 @@ config ARCH_RV64I select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FTRACE_MCOUNT_RECORD - select HAVE_DYNAMIC_FTRACE - select HAVE_DYNAMIC_FTRACE_WITH_REGS - select SWIOTLB + select HAVE_DYNAMIC_FTRACE if MMU + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE + select SWIOTLB if MMU endchoice
arch/riscv/configs/nommu_virt_defconfig new file +78 -0
78 lines not on this page · raw message
arch/riscv/include/asm/elf.h +2 -2
@@ -56,16 +56,16 @@ extern unsigned long elf_hwcap;*/ #define ELF_PLATFORM (NULL) +#ifdef CONFIG_MMU #define ARCH_DLINFO \ do { \ NEW_AUX_ENT(AT_SYSINFO_EHDR, \ (elf_addr_t)current->mm->context.vdso); \ } while (0) - -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES struct linux_binprm ;extern int arch_setup_additional_pages (struct linux_binprm *bprm,int uses_interp); +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_ELF_H */
arch/riscv/include/asm/futex.h +6 -0
@@ -12,6 +12,12 @@#include <linux/errno.h> #include <asm/asm.h> +/* We don't even really need the extable code, but for now keep it simple */ +#ifndef CONFIG_MMU +#define __enable_user_access () do { } while (0) +#define __disable_user_access () do { } while (0) +#endif +#define __futex_atomic_op (insn, ret, oldval, uaddr, oparg) \ { \ uintptr_t tmp; \
arch/riscv/include/asm/io.h +4 -0
@@ -14,6 +14,7 @@#include <linux/types.h> #include <asm/mmiowb.h> +#ifdef CONFIG_MMU extern void __iomem *ioremap (phys_addr_t offset,unsigned long size);/*
@@ -26,6 +27,9 @@ extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);#define ioremap_wt (addr, size) ioremap((addr), (size))extern void iounmap (volatile void __iomem *addr); +#else +#define pgprot_noncached (x) (x) +#endif /* CONFIG_MMU */ /* Generic IO read/write. These perform native-endian accesses. */ #define __raw_writeb __raw_writeb
arch/riscv/include/asm/mmu.h +3 -0
@@ -10,6 +10,9 @@ #ifndef __ASSEMBLY__ typedef struct { +#ifndef CONFIG_MMU + unsigned long end_brk; +#endif void *vdso; #ifdef CONFIG_SMP /* A local icache flush is needed before user execution can resume. */
arch/riscv/include/asm/page.h +9 -3
@@ -78,8 +78,14 @@ typedef struct page *pgtable_t;#define PTE_FMT "%08lx"#endif +#ifdef CONFIG_MMU extern unsigned long va_pa_offset;extern unsigned long pfn_base; +#define ARCH_PFN_OFFSET (pfn_base) +#else +#define va_pa_offset 0 +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) +#endif /* CONFIG_MMU */ extern unsigned long max_low_pfn;extern unsigned long min_low_pfn;
@@ -101,9 +107,7 @@ extern unsigned long min_low_pfn;#define phys_to_page (paddr) (pfn_to_page(phys_to_pfn(paddr)))#define pfn_valid (pfn) \ - (((pfn) >= pfn_base) && (((pfn)-pfn_base) < max_mapnr)) - -#define ARCH_PFN_OFFSET (pfn_base) + (((pfn) >= ARCH_PFN_OFFSET) && (((pfn) - ARCH_PFN_OFFSET) < max_mapnr))#endif /* __ASSEMBLY__ */
@@ -115,8 +119,10 @@ extern unsigned long min_low_pfn;#include <asm-generic/memory_model.h> #include <asm-generic/getorder.h> +#ifdef CONFIG_MMU /* vDSO support */ /* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ #define __HAVE_ARCH_GATE_AREA +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_PAGE_H */
arch/riscv/include/asm/pgalloc.h +2 -0
@@ -10,6 +10,7 @@#include <linux/mm.h> #include <asm/tlb.h> +#ifdef CONFIG_MMU static inline void pmd_populate_kernel (struct mm_struct *mm,pmd_t *pmd,pte_t *pte) {
@@ -106,6 +107,7 @@ do { \pgtable_page_dtor (pte); \tlb_remove_page ((tlb), pte); \ } while (0) +#endif /* CONFIG_MMU */ static inline void check_pgt_cache (void ) {
arch/riscv/include/asm/pgtable.h +26 -12
@@ -24,6 +24,7 @@#include <asm/pgtable-32.h> #endif /* CONFIG_64BIT */ +#ifdef CONFIG_MMU /* Number of entries in the page global directory */ #define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t))/* Number of entries in the page table */
@@ -31,7 +32,6 @@/* Number of PGD entries that a user-mode program can use */ #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0/* Page protection bits */ #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_USER)
@@ -81,13 +81,6 @@ extern pgd_t swapper_pg_dir[];#define __S110 PAGE_SHARED_EXEC#define __S111 PAGE_SHARED_EXEC -/* -* ZERO_PAGE is a global shared page that is always zero, -* used for zero-mapped memory areas, etc. -*/ -extern unsigned long empty_zero_page[PAGE_SIZE /sizeof (unsigned long )]; -#define ZERO_PAGE (vaddr) (virt_to_page(empty_zero_page)) -static inline int pmd_present (pmd_t pmd) {return (pmd_val (pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
@@ -392,6 +385,18 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,#define __pte_to_swp_entry (pte) ((swp_entry_t) { pte_val(pte) })#define __swp_entry_to_pte (x) ((pte_t) { (x).val }) +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) +#define VMALLOC_END (PAGE_OFFSET - 1) +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) + +#else /* CONFIG_MMU */ + +#define PAGE_KERNEL __pgprot(0) +#define swapper_pg_dir NULL +#define VMALLOC_START 0 + +#endif /* CONFIG_MMU */ +#ifdef CONFIG_FLATMEM #define kern_addr_valid (addr) (1)/* FIXME */ #endif
@@ -404,10 +409,7 @@ static inline void pgtable_cache_init(void)/* No page table caches to initialize */ } -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) -#define VMALLOC_END (PAGE_OFFSET - 1) -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) - +#ifdef CONFIG_MMU /* * Task size is 0x40000000000 for RV64 or 0xb800000 for RV32. * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
@@ -417,6 +419,18 @@ static inline void pgtable_cache_init(void)#else #define TASK_SIZE VMALLOC_START#endif +#else /* CONFIG_MMU */ +#define TASK_SIZE 0xffffffffUL +#endif /* !CONFIG_MMU */ + +#define FIRST_USER_ADDRESS 0 + +/* +* ZERO_PAGE is a global shared page that is always zero, +* used for zero-mapped memory areas, etc. +*/ +extern unsigned long empty_zero_page[PAGE_SIZE /sizeof (unsigned long )]; +#define ZERO_PAGE (vaddr) (virt_to_page(empty_zero_page))#include <asm-generic/pgtable.h>
arch/riscv/include/asm/tlbflush.h +6 -1
@@ -10,6 +10,7 @@#include <linux/mm_types.h> #include <asm/smp.h> +#ifdef CONFIG_MMU /* * Flush entire local TLB. 'sfence.vma' implicitly fences with the instruction * cache as well, so a 'fence.i' is not necessary.
@@ -24,8 +25,12 @@ static inline void local_flush_tlb_page(unsigned long addr) { __asm__ __volatile__ ("sfence.vma %0" : :"r" (addr) :"memory" ); } +#else /* CONFIG_MMU */ +#define local_flush_tlb_all () do { } while (0) +#define local_flush_tlb_page (addr) do { } while (0) +#endif /* CONFIG_MMU */ -#ifndef CONFIG_SMP +#if !defined(CONFIG_SMP ) || !defined(CONFIG_MMU )#define flush_tlb_all () local_flush_tlb_all()#define flush_tlb_page (vma, addr) local_flush_tlb_page(addr)
arch/riscv/include/asm/uaccess.h +4 -0
@@ -11,6 +11,7 @@/* * User space memory access functions */ +#ifdef CONFIG_MMU #include <linux/errno.h> #include <linux/compiler.h> #include <linux/thread_info.h>
@@ -475,4 +476,7 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n) __ret; \ }) +#else /* CONFIG_MMU */ +#include <asm-generic/uaccess.h> +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_UACCESS_H */
arch/riscv/kernel/Makefile +1 -2
@@ -25,9 +25,8 @@ obj-y += time.o obj-y += traps.o obj-y += riscv_ksyms.o obj-y += stacktrace.o -obj-y += vdso.o obj-y += cacheinfo.o -obj-y += vdso/ +obj-$(CONFIG_MMU) += vdso.o vdso/ obj-$(CONFIG_M_MODE) += clint.o obj-$(CONFIG_FPU) += fpu.o
arch/riscv/kernel/entry.S +11 -0
@@ -370,6 +370,10 @@ ENTRY(__switch_to) ret ENDPROC(__switch_to) +#ifndef CONFIG_MMU +#define do_page_fault do_trap_unknown +#endif + .section ".rodata" /* Exception vector table */ ENTRY(excp_vect_table)
@@ -391,3 +395,10 @@ ENTRY(excp_vect_table) RISCV_PTR do_page_fault /* store page fault */ excp_vect_table_end: END(excp_vect_table) + +#ifndef CONFIG_MMU +ENTRY(__user_rt_sigreturn) + li a7, __NR_rt_sigreturn + scall +END(__user_rt_sigreturn) +#endif
arch/riscv/kernel/head.S +6 -0
@@ -68,10 +68,12 @@ clear_bss_done: la a2, boot_cpu_hartid REG_S a0, (a2) +#ifdef CONFIG_MMU /* Initialize page tables and relocate to virtual addresses */ la sp, init_thread_union + THREAD_SIZE call setup_vm call relocate +#endif /* CONFIG_MMU */ /* Restore C environment */ la tp, init_task
@@ -83,6 +85,7 @@ clear_bss_done: call parse_dtb tail start_kernel +#ifdef CONFIG_MMU relocate: /* Relocate return address */ li a1, PAGE_OFFSET
@@ -134,6 +137,7 @@ relocate: sfence.vma ret +#endif /* CONFIG_MMU */ .Lsecondary_start: #ifdef CONFIG_SMP
@@ -162,8 +166,10 @@ relocate: beqz tp, .Lwait_for_cpu_up fence +#ifdef CONFIG_MMU /* Enable virtual memory and relocate to virtual address */ call relocate +#endif tail smp_callin #endif
arch/riscv/kernel/signal.c +16 -1
@@ -17,11 +17,16 @@#include <asm/switch_to.h> #include <asm/csr.h> +extern u32 __user_rt_sigreturn[2 ]; +#define DEBUG_SIG 0struct rt_sigframe {struct siginfo info;struct ucontext uc; +#ifndef CONFIG_MMU +u32 sigreturn_code[2 ]; +#endif };#ifdef CONFIG_FPU
@@ -166,7 +171,6 @@ static inline void __user *get_sigframe(struct ksignal *ksig,return (void __user *)sp; } -static int setup_rt_frame (struct ksignal *ksig,sigset_t *set,struct pt_regs *regs) {
@@ -189,8 +193,19 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,return -EFAULT ;/* Set up to return from userspace. */ +#ifdef CONFIG_MMU regs->ra = (unsigned long )VDSO_SYMBOL ( current->mm->context.vdso, rt_sigreturn); +#else +/* +* For the nommu case we don't have a VDSO. Instead we push two +* instructions to call the rt_sigreturn syscall onto the user stack. +*/ +if (copy_to_user (&frame->sigreturn_code, __user_rt_sigreturn, +sizeof (frame->sigreturn_code))) +return -EFAULT ; + regs->ra = (unsigned long )&frame->sigreturn_code;; +#endif /* CONFIG_MMU */ /* * Set up registers for signal handler.
arch/riscv/lib/Makefile +3 -5
@@ -2,8 +2,6 @@ lib-y += delay.o lib-y += memcpy.o lib-y += memset.o -lib-y += uaccess.o - -lib-$(CONFIG_64BIT) += tishift.o - -lib-$(CONFIG_32BIT) += udivdi3.o +lib-$(CONFIG_MMU) += uaccess.o +lib-$(CONFIG_64BIT) += tishift.o +lib-$(CONFIG_32BIT) += udivdi3.o
arch/riscv/mm/Makefile +1 -2
@@ -6,9 +6,8 @@ CFLAGS_REMOVE_init.o = -pg endif obj-y += init.o -obj-y += fault.o obj-y += extable.o -obj-y += ioremap.o +obj-$(CONFIG_MMU) += fault.o ioremap.o obj-y += cacheflush.o obj-y += context.o obj-y += sifive_l2_cache.o
arch/riscv/mm/cacheflush.c +2 -0
@@ -90,6 +90,7 @@ void flush_icache_mm(struct mm_struct *mm, bool local)#endif /* CONFIG_SMP */ +#ifdef CONFIG_MMU void flush_icache_pte (pte_t pte) {struct page *page =pte_page (pte);
@@ -97,3 +98,4 @@ void flush_icache_pte(pte_t pte)if (!test_and_set_bit (PG_dcache_clean, &page->flags)) flush_icache_all(); } +#endif /* CONFIG_MMU */
arch/riscv/mm/context.c +2 -0
@@ -57,8 +57,10 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,cpumask_clear_cpu (cpu,mm_cpumask (prev));cpumask_set_cpu (cpu,mm_cpumask (next)); +#ifdef CONFIG_MMU csr_write (CSR_SATP ,virt_to_pfn (next->pgd) |SATP_MODE );local_flush_tlb_all (); +#endif flush_icache_deferred (next); }
arch/riscv/mm/init.c +2 -0
@@ -142,6 +142,7 @@ void __init setup_bootmem(void) } } +#ifdef CONFIG_MMU unsigned long va_pa_offset;EXPORT_SYMBOL (va_pa_offset);unsigned long pfn_base;
@@ -247,3 +248,4 @@ asmlinkage void __init setup_vm(void) __pgprot(_PAGE_TABLE)); #endif } +#endif /* CONFIG_MMU */
Signature · 1 line
2.20.1
Re: [PATCH 17/17] riscv: add nommu support
Hi Christoph,
Quoted 46 lines · Christoph Hellwig
The kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware.
Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation:
- The normal RISC-V syscall ABI only implements
rt_sigreturnas VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack.In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line:
qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0Contains contributions from Damien Le Moal <[email protected]>.
Signed-off-by Christoph Hellwig <[email protected]>--- arch/riscv/Kconfig | 24 +++++--- arch/riscv/configs/nommu_virt_defconfig | 78 +++++++++++++++++++++++++ arch/riscv/include/asm/elf.h | 4 +- arch/riscv/include/asm/futex.h | 6 ++ arch/riscv/include/asm/io.h | 4 ++ arch/riscv/include/asm/mmu.h | 3 + arch/riscv/include/asm/page.h | 12 +++- arch/riscv/include/asm/pgalloc.h | 2 + arch/riscv/include/asm/pgtable.h | 38 ++++++++---- arch/riscv/include/asm/tlbflush.h | 7 ++- arch/riscv/include/asm/uaccess.h | 4 ++ arch/riscv/kernel/Makefile | 3 +- arch/riscv/kernel/entry.S | 11 ++++ arch/riscv/kernel/head.S | 6 ++ arch/riscv/kernel/signal.c | 17 +++++- arch/riscv/lib/Makefile | 8 +-- arch/riscv/mm/Makefile | 3 +- arch/riscv/mm/cacheflush.c | 2 + arch/riscv/mm/context.c | 2 + arch/riscv/mm/init.c | 2 + 20 files changed, 200 insertions(+), 36 deletions(-) create mode 100644 arch/riscv/configs/nommu_virt_defconfig
snip...
Quoted 36 lines
arch/riscv/configs/nommu_virt_defconfig new file +29
-0@@ -0,0 +1,78 @@ +# CONFIG_CPU_ISOLATION is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EXPERT=y +# CONFIG_SYSFS_SYSCALL is not set +# CONFIG_FHANDLE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_IO_URING is not set +# CONFIG_ADVISE_SYSCALLS is not set +# CONFIG_MEMBARRIER is not set +# CONFIG_KALLSYMS is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLOB=y +# CONFIG_SLAB_MERGE_DEFAULT is not set +# CONFIG_MMU is not set +CONFIG_MAXPHYSMEM_2GB=y
arch/riscv/configs/nommu_virt_defconfig line 39
Quoted 10 lines
arch/riscv/configs/nommu_virt_defconfig new file +10
-0+CONFIG_SMP=y +CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0" +CONFIG_CMDLINE_FORCE=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_MQ_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_KYBER is not set +CONFIG_BINFMT_FLAT=y
IIUC, RISC-V requires stack pointer to be 16 byte aligned, but flat loader would align stack pointer to max(sizeof(void *), ARCH_SLAB_MINALIGN). So, I think you might want to define ARCH_SLAB_MINALIGN.
Cheers
Vladimir
Hi,
Quoted 27 lines · Christoph Hellwig
Hi all,
below is a series to support nommu mode on RISC-V. For now this series just works under qemu with the qemu-virt platform, but Damien has also been able to get kernel based on this tree with additional driver hacks to work on the Kendryte KD210, but that will take a while to cleanup an upstream.
To be useful this series also require the RISC-V
binfmt_flatsupport, which I've sent out separately.A branch that includes this series and the
binfmt_flatsupport is available here:
git://git.infradead.org/users/hch/riscv.gitriscv-nommu.2Gitweb:
http://git.infradead.org/users/hch/riscv.git/shortlog/refs/heads/riscv-nommu.2
I've also pushed out a builtroot branch that can build a RISC-V nommu root filesystem here:
git://git.infradead.org/users/hch/buildroot.gitriscv-nommu.2Gitweb:
Quoted 9 lines
http://git.infradead.org/users/hch/buildroot.git/shortlog/refs/heads/riscv-nommu.2
Changes since v1:
- fixes so that a kernel with this series still work on builds with an IOMMU
- small clint cleanups
- thebinfmt_flatbase and buildroot now don't put arguments on the stack
Since you are using binfmt_flat which is kind of 32-bit only I was expecting to see CONFIG_COMPAT (or something similar to that, like ILP32) enabled, yet I could not find it.
I do not know much about RISC-V architecture, so it is why I'm wondering how you deal with that?
Cheers
Vladimir
Quoted 3 lines · Vladimir Murzin
Since you are using
binfmt_flatwhich is kind of 32-bit only I was expecting to seeCONFIG_COMPAT(or something similar to that, like ILP32) enabled, yet I could not find it.
There is no such thing in RISC-V. I don't know of any 64-bit RISC-V cpu that can actually run 32-bit RISC-V code, although in theory that is possible. There also is nothing like the x86 x32 or mips n32 mode available either for now.
But it turns out that with a few fixes to binfmt_flat it can run 64-bit binaries just fine. I sent that series out a while ago, and IIRC you actually commented on it.
Quoted 5 lines · Christoph Hellwig
Quoted 3 lines · Vladimir Murzin
Since you are using
binfmt_flatwhich is kind of 32-bit only I was expecting to seeCONFIG_COMPAT(or something similar to that, like ILP32) enabled, yet I could not find it.
Quoted 9 lines
There is no such thing in RISC-V. I don't know of any 64-bit RISC-V cpu that can actually run 32-bit RISC-V code, although in theory that is possible. There also is nothing like the x86 x32 or mips n32 mode available either for now.
But it turns out that with a few fixes to
binfmt_flatit can run 64-bit binaries just fine. I sent that series out a while ago, and IIRC you actually commented on it.
True, yet my observation was that elf2flt utility assumes that address space cannot exceed 32-bit (for header and absolute relocations). So, from my limited point of view straightforward way to guarantee that would be to build incoming elf in 32-bit mode (it is why I mentioned COMPAT/ILP32).
Also one of your patches expressed somewhat related idea
"binfmt_flat isn't the right binary format for huge executables to start with"
Since you said there is no support for compat/ilp32, probably I'm missing some toolchain magic?
Cheers
Vladimir
Quoted 5 lines · Vladimir Murzin
True, yet my observation was that elf2flt utility assumes that address space cannot exceed 32-bit (for header and absolute relocations). So, from my limited point of view straightforward way to guarantee that would be to build incoming elf in 32-bit mode (it is why I mentioned COMPAT/ILP32).
Quoted 7 lines
Also one of your patches expressed somewhat related idea
"
binfmt_flatisn't the right binary format for huge executables to start with"Since you said there is no support for compat/ilp32, probably I'm missing some toolchain magic?
There is no magic except for the tiny elf2flt patch, which for now is just in the buildroot repo pointed to in the cover letter (and which I plan to upstream once the kernel support has landed in Linus' tree). We only support 32-bit code and data address spaces, but we otherwise use the normal RISC-V ABI, that is 64-bit longs and pointers.
Quoted 23 lines · On Mon, 24 Jun 2019 06:08:50 PDT (-0700), [email protected] wrote:
Quoted 5 lines · Christoph Hellwig
Quoted 3 lines · Vladimir Murzin
Since you are using
binfmt_flatwhich is kind of 32-bit only I was expecting to seeCONFIG_COMPAT(or something similar to that, like ILP32) enabled, yet I could not find it.Quoted 9 lines
There is no such thing in RISC-V. I don't know of any 64-bit RISC-V cpu that can actually run 32-bit RISC-V code, although in theory that is possible. There also is nothing like the x86 x32 or mips n32 mode available either for now.
But it turns out that with a few fixes to
binfmt_flatit can run 64-bit binaries just fine. I sent that series out a while ago, and IIRC you actually commented on it.True, yet my observation was that elf2flt utility assumes that address space cannot exceed 32-bit (for header and absolute relocations). So, from my limited point of view straightforward way to guarantee that would be to build incoming elf in 32-bit mode (it is why I mentioned COMPAT/ILP32).
Also one of your patches expressed somewhat related idea
Quoted 8 lines
"
binfmt_flatisn't the right binary format for huge executables to start with"Since you said there is no support for compat/ilp32, probably I'm missing some toolchain magic?
Cheers
Vladimir
To: Christoph Hellwig <[email protected]> CC: [email protected] CC: Christoph Hellwig <[email protected]> CC: Paul Walmsley <[email protected]> CC: Damien Le Moal <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Subject: Re: RISC-V nommu support v2
In-Reply-To: <[email protected]>
Quoted 14 lines · Christoph Hellwig
Quoted 5 lines · Vladimir Murzin
True, yet my observation was that elf2flt utility assumes that address space cannot exceed 32-bit (for header and absolute relocations). So, from my limited point of view straightforward way to guarantee that would be to build incoming elf in 32-bit mode (it is why I mentioned COMPAT/ILP32).
Quoted 7 lines
Also one of your patches expressed somewhat related idea
"
binfmt_flatisn't the right binary format for huge executables to start with"Since you said there is no support for compat/ilp32, probably I'm missing some toolchain magic?
Quoted 6 lines
There is no magic except for the tiny elf2flt patch, which for now is just in the buildroot repo pointed to in the cover letter (and which I plan to upstream once the kernel support has landed in Linus' tree). We only support 32-bit code and data address spaces, but we otherwise use the normal RISC-V ABI, that is 64-bit longs and pointers.
The medlow code model on RISC-V essentially enforces this -- technically it enforces a 32-bit region centered around address 0, but it's not that hard to stay away from negative addresses. That said, as long as elf2flt gives you an error it should be fine because all medlow is going to do is give you a different looking error message.
Quoted 65 lines · Palmer Dabbelt
Quoted 23 lines · On Mon, 24 Jun 2019 06:08:50 PDT (-0700), [email protected] wrote:
Quoted 5 lines · Christoph Hellwig
Quoted 3 lines · Vladimir Murzin
Since you are using
binfmt_flatwhich is kind of 32-bit only I was expecting to seeCONFIG_COMPAT(or something similar to that, like ILP32) enabled, yet I could not find it.Quoted 9 lines
There is no such thing in RISC-V. I don't know of any 64-bit RISC-V cpu that can actually run 32-bit RISC-V code, although in theory that is possible. There also is nothing like the x86 x32 or mips n32 mode available either for now.
But it turns out that with a few fixes to
binfmt_flatit can run 64-bit binaries just fine. I sent that series out a while ago, and IIRC you actually commented on it.True, yet my observation was that elf2flt utility assumes that address space cannot exceed 32-bit (for header and absolute relocations). So, from my limited point of view straightforward way to guarantee that would be to build incoming elf in 32-bit mode (it is why I mentioned COMPAT/ILP32).
Also one of your patches expressed somewhat related idea
Quoted 8 lines
"
binfmt_flatisn't the right binary format for huge executables to start with"Since you said there is no support for compat/ilp32, probably I'm missing some toolchain magic?
Cheers
VladimirTo: Christoph Hellwig <[email protected]> CC: [email protected]
CC: Christoph Hellwig <[email protected]> CC: Paul Walmsley <[email protected]> CC: Damien Le Moal <[email protected]> CC: [email protected] CC: [email protected]
CC: [email protected] Subject: Re: RISC-V nommu support v2
In-Reply-To: <[email protected]>Quoted 14 lines · Christoph Hellwig
Quoted 5 lines · Vladimir Murzin
True, yet my observation was that elf2flt utility assumes that address space cannot exceed 32-bit (for header and absolute relocations). So, from my limited point of view straightforward way to guarantee that would be to build incoming elf in 32-bit mode (it is why I mentioned COMPAT/ILP32).
Quoted 7 lines
Also one of your patches expressed somewhat related idea
"
binfmt_flatisn't the right binary format for huge executables to start with"Since you said there is no support for compat/ilp32, probably I'm missing some toolchain magic?
Quoted 6 lines
There is no magic except for the tiny elf2flt patch, which for now is just in the buildroot repo pointed to in the cover letter (and which I plan to upstream once the kernel support has landed in Linus' tree). We only support 32-bit code and data address spaces, but we otherwise use the normal RISC-V ABI, that is 64-bit longs and pointers.
Quoted 6 lines
The medlow code model on RISC-V essentially enforces this -- technically it enforces a 32-bit region centered around address 0, but it's not that hard to stay away from negative addresses. That said, as long as elf2flt gives you an error it should be fine because all medlow is going to do is give you a different looking error message.
Thanks for explanation!
Vladimir
Palmer, Paul,
any comments? Let me know if you think it is too late for 5.3 for the full series, then I can at least feed the mm bits to Andrew.
Quoted 35 lines · Christoph Hellwig
Hi all,
below is a series to support nommu mode on RISC-V. For now this series just works under qemu with the qemu-virt platform, but Damien has also been able to get kernel based on this tree with additional driver hacks to work on the Kendryte KD210, but that will take a while to cleanup an upstream.
To be useful this series also require the RISC-V
binfmt_flatsupport, which I've sent out separately.A branch that includes this series and the
binfmt_flatsupport is available here:
git://git.infradead.org/users/hch/riscv.gitriscv-nommu.2Gitweb:
http://git.infradead.org/users/hch/riscv.git/shortlog/refs/heads/riscv-nommu.2
I've also pushed out a builtroot branch that can build a RISC-V nommu root filesystem here:
git://git.infradead.org/users/hch/buildroot.gitriscv-nommu.2Gitweb:
http://git.infradead.org/users/hch/buildroot.git/shortlog/refs/heads/riscv-nommu.2
Changes since v1:
- fixes so that a kernel with this series still work on builds with an IOMMU
- small clint cleanups
- thebinfmt_flatbase and buildroot now don't put arguments on the stack
Quoted 4 lines
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
---end quoted text---
Hi Christoph,
Probably best to feed the mm patches to Andrew. For the RISC-V patches, am running a bit behind this merge window. Combined with the end of the week holidays in the US, I doubt I'll make it to to the nommu series for v5.3.
- Paul
Quoted 48 lines · Christoph Hellwig
Palmer, Paul,
any comments? Let me know if you think it is too late for 5.3 for the full series, then I can at least feed the mm bits to Andrew.
Quoted 35 lines · Christoph Hellwig
Hi all,
below is a series to support nommu mode on RISC-V. For now this series just works under qemu with the qemu-virt platform, but Damien has also been able to get kernel based on this tree with additional driver hacks to work on the Kendryte KD210, but that will take a while to cleanup an upstream.
To be useful this series also require the RISC-V
binfmt_flatsupport, which I've sent out separately.A branch that includes this series and the
binfmt_flatsupport is available here:
git://git.infradead.org/users/hch/riscv.gitriscv-nommu.2Gitweb:
http://git.infradead.org/users/hch/riscv.git/shortlog/refs/heads/riscv-nommu.2
I've also pushed out a builtroot branch that can build a RISC-V nommu root filesystem here:
git://git.infradead.org/users/hch/buildroot.gitriscv-nommu.2Gitweb:
http://git.infradead.org/users/hch/buildroot.git/shortlog/refs/heads/riscv-nommu.2
Changes since v1:
- fixes so that a kernel with this series still work on builds with an IOMMU
- small clint cleanups
- thebinfmt_flatbase and buildroot now don't put arguments on the stackQuoted 4 lines
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv---end quoted text---