Skip to contentSkip to conversation

drivers/spi: fsl_qspi: fix controller busy check

PATCH New Fabio Estevam 2 participants 2 messages Jun 24, 2019 – Jun 25, 2019 SPI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers/spi: fsl_qspi: fix controller busy check

From: Thomas Schaefer <[email protected]>

During QSPI reads, current is_busy_controller function sporadically fails with -ETIMEDOUT due to fixed number of 5 test loops. This patch fixes this by using the readl_poll_timeout function with 1000 us timeout.

---
 drivers/spi/fsl_qspi.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)
drivers/spi/fsl_qspi.c +6 -12
index 1598c4f698..41abe1996f 100644
@@ -10,6 +10,7 @@
 #include <spi.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
+#include <linux/iopoll.h>
 #include <dm.h>
 #include <errno.h>
 #include <watchdog.h>
@@ -150,20 +151,13 @@ static void qspi_write32(u32 flags, u32 *addr, u32 val)
 static inline int is_controller_busy(const struct fsl_qspi_priv *priv)
 {
 	u32 val;
-	const u32 mask = QSPI_SR_BUSY_MASK | QSPI_SR_AHB_ACC_MASK |
-			 QSPI_SR_IP_ACC_MASK;
-	unsigned int retry = 5;
+	u32 mask = QSPI_SR_BUSY_MASK | QSPI_SR_AHB_ACC_MASK |
+		   QSPI_SR_IP_ACC_MASK;
 
-	do {
-		val = qspi_read32(priv->flags, &priv->regs->sr);
+	if (priv->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG)
+		mask = (u32)cpu_to_be32(mask);
 
-		if ((~val & mask) == mask)
-			return 0;
-
-		udelay(1);
-	} while (--retry);
-
-	return -ETIMEDOUT;
+	return readl_poll_timeout(&priv->regs->sr, val, !(val & mask), 1000);
 }
 
 /* QSPI support swapping the flash read/write data
Signature · 1 line
2.11.0
#1 lore raw

PATCH 1/1 drivers/spi: fsl_qspi: fix controller busy check

Quoted 7 lines · Fabio Estevam

From: Thomas Schaefer <[email protected]>

During QSPI reads, current is_busy_controller function sporadically fails with -ETIMEDOUT due to fixed number of 5 test loops. This patch fixes this by using the readl_poll_timeout function with 1000 us timeout.

This sounds like two different functionalities into one patch. better create a timeout fix in one patch and another patch to migrate read_poll.