Linux 4.19.56
Greg KH
maintainerI'm announcing the release of the 4.19.56 kernel.
All users of the 4.19 kernel series must upgrade.
The updated 4.19.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.19.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 4 arch/arc/boot/dts/hsdk.dts | 4 arch/arc/include/asm/cmpxchg.h | 14 - arch/arc/mm/tlb.c | 13 - arch/arm/boot/dts/am57xx-idk-common.dtsi | 1 arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi | 40 +-- arch/arm/mach-imx/cpuidle-imx6sx.c | 3 arch/arm64/Makefile | 1 arch/arm64/include/uapi/asm/ptrace.h | 8 arch/arm64/kernel/ssbd.c | 1 arch/mips/kernel/uprobes.c | 3 arch/parisc/math-emu/cnv_float.h | 8 arch/powerpc/include/asm/ppc-opcode.h | 1 arch/powerpc/mm/mmu_context_book3s64.c | 46 ++++ arch/powerpc/net/bpf_jit.h | 2 arch/powerpc/net/bpf_jit_comp64.c | 8 arch/riscv/mm/fault.c | 13 + arch/s390/include/asm/ap.h | 28 +- arch/s390/include/asm/jump_label.h | 14 - arch/sparc/kernel/mdesc.c | 2 arch/sparc/kernel/perf_event.c | 4 arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 2 arch/xtensa/kernel/setup.c | 3 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 3 drivers/dma/sprd-dma.c | 2 drivers/fpga/dfl-afu-dma-region.c | 2 drivers/fpga/dfl.c | 16 + drivers/gpu/drm/arm/hdlcd_crtc.c | 14 - drivers/gpu/drm/arm/malidp_drv.c | 13 + drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 146 +++++++++++--- drivers/hwmon/hwmon.c | 2 drivers/hwmon/pmbus/pmbus_core.c | 34 ++- drivers/iio/temperature/mlx90632.c | 9 drivers/infiniband/hw/hfi1/chip.c | 1 drivers/infiniband/hw/hfi1/fault.c | 5 drivers/infiniband/hw/hfi1/user_exp_rcv.c | 3 drivers/infiniband/hw/hfi1/verbs.c | 2 drivers/infiniband/hw/hfi1/verbs_txreq.c | 2 drivers/infiniband/hw/hfi1/verbs_txreq.h | 3 drivers/infiniband/hw/qib/qib_verbs.c | 2 drivers/infiniband/sw/rdmavt/mr.c | 2 drivers/infiniband/sw/rdmavt/qp.c | 3 drivers/input/misc/uinput.c | 22 +- drivers/input/mouse/synaptics.c | 2 drivers/input/touchscreen/silead.c | 1 drivers/mmc/core/core.c | 5 drivers/mmc/core/sdio.c | 13 + drivers/mmc/core/sdio_io.c | 77 +++++++ drivers/mmc/core/sdio_irq.c | 4 drivers/mmc/host/sdhci-pci-o2micro.c | 5 drivers/net/can/flexcan.c | 2 drivers/net/can/xilinx_can.c | 2 drivers/net/dsa/mv88e6xxx/chip.c | 2 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 4 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 15 - drivers/net/ipvlan/ipvlan_main.c | 2 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 11 + drivers/nvme/host/core.c | 3 drivers/nvme/target/io-cmd-bdev.c | 1 drivers/parport/share.c | 2 drivers/s390/net/qeth_l2_main.c | 2 drivers/scsi/smartpqi/smartpqi_init.c | 6 drivers/scsi/ufs/ufshcd-pltfrm.c | 11 - drivers/scsi/ufs/ufshcd.c | 3 drivers/staging/erofs/erofs_fs.h | 13 - drivers/staging/erofs/internal.h | 2 drivers/staging/erofs/super.c | 19 + drivers/usb/chipidea/udc.c | 20 + drivers/usb/host/xhci-ring.c | 15 + drivers/usb/host/xhci.c | 25 +- drivers/usb/host/xhci.h | 9 fs/btrfs/reada.c | 5 fs/cifs/smb2maperror.c | 2 fs/overlayfs/file.c | 96 ++++++--- fs/overlayfs/inode.c | 60 +++++ fs/overlayfs/namei.c | 8 fs/overlayfs/overlayfs.h | 3 fs/overlayfs/ovl_entry.h | 6 fs/overlayfs/super.c | 161 ++++++++++++++-- fs/overlayfs/util.c | 12 + include/linux/mmc/host.h | 1 include/linux/mmc/sdio_func.h | 6 include/net/bluetooth/hci_core.h | 3 include/net/cfg80211.h | 3 kernel/trace/trace.c | 6 kernel/trace/trace.h | 18 + kernel/trace/trace_kdb.c | 6 net/bluetooth/hci_conn.c | 10 net/bluetooth/l2cap_core.c | 33 ++- net/can/af_can.c | 1 net/mac80211/ieee80211_i.h | 3 net/mac80211/mlme.c | 12 + net/mac80211/rx.c | 2 net/mac80211/tdls.c | 23 ++ net/mac80211/util.c | 4 net/mac80211/wpa.c | 7 net/wireless/core.c | 8 net/wireless/nl80211.c | 12 - scripts/checkstack.pl | 2 security/apparmor/include/policy.h | 11 - security/apparmor/policy_unpack.c | 2 tools/objtool/check.c | 38 +++ tools/objtool/check.h | 4 tools/objtool/elf.c | 1 tools/objtool/elf.h | 3 tools/testing/selftests/cgroup/test_core.c | 7 tools/testing/selftests/cgroup/test_memcontrol.c | 4 tools/testing/selftests/vm/Makefile | 2 108 files changed, 1120 insertions(+), 250 deletions(-)
Alex Shi (3):
kselftest/cgroup: fix unexpected testing failure on test_memcontrol kselftest/cgroup: fix unexpected testing failure on test_core kselftest/cgroup: fix incorrect test_core skip
Alexander Mikhaylenko (1):
Input: synaptics - enable SMBus on ThinkPad E480 and E580
Alexandra Winter (1):
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
Allan Xavier (1):
objtool: Support per-function rodata sections
Amir Goldstein (4):
ovl: support the FS_IOC_FS[SG]ETXATTR ioctls
ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls
ovl: make i_ino consistent with st_ino in more cases
ovl: detect overlapping layers
Andrey Smirnov (1):
Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD
Andy Strohman (1):
nl80211: fix station_info pertid memory leak
Anisse Astier (2):
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
arm64: ssbd: explicitly depend on <linux/prctl.h>
Anssi Hannula (1):
can: xilinx_can: use correct bittiming_const for CAN FD core
Arnd Bergmann (1):
ovl: fix bogus -Wmaybe-unitialized warning
Avri Altman (1):
scsi: ufs: Check that space was properly alloced in copy_query_response
Colin Ian King (1):
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
Crt Mori (1):
iio: temperature: mlx90632 Relax the compatibility check
Dan Carpenter (1):
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()
Daniel Smith (1):
Input: silead - add MSSL0017 to acpi_device_id
Dave Martin (1):
arm64: Silence gcc warnings about arch ABI drift
Douglas Anderson (4):
mmc: core: API to temporarily disable retuning for SDIO CRC errors
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
brcmfmac: sdio: Disable auto-tuning around commands expected to fail
brcmfmac: sdio: Don't tune while the card is off
Eduardo Valentin (1):
hwmon: (core) add thermal sensors only if dev->of_node is present
Eric Biggers (1):
cfg80211: fix memory leak of wiphy device name
Eric Long (1):
dmaengine: sprd: Fix block length overflow
Fabio Estevam (1):
ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX
Faiz Abbas (2):
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
Gao Xiang (1):
staging: erofs: add requirements field in superblock
Gen Zhang (1):
mdesc: fix a missing-check bug in get_vdev_port_node_info()
George G. Davis (1):
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture
Greg Kroah-Hartman (1):
Linux 4.19.56
Guenter Roeck (1):
xtensa: Fix section mismatch between memblock_reserve and mem_reserve
Harald Freudenberger (1):
s390/ap: rework assembler functions to use unions for in/out register variables
Helge Deller (1):
parisc: Fix compiler warnings in float emulation code
Ilya Leoshkevich (1):
s390/jump_label: Use "jdd" constraint on gcc9
Jaesoo Lee (1):
nvme: Fix u32 overflow in the number of namespace list calculation
James Morse (1):
x86/resctrl: Don't stop walking closids when a locksetup group is found
Jann Horn (1):
apparmor: enforce nullbyte at end of tag string
Joakim Zhang (1):
can: flexcan: fix timeout when set small bitrate
Johannes Berg (1):
mac80211: drop robust management frames from unknown TA
John Johansen (1):
apparmor: fix PROFILE_MEDIATES for untrusted input
Jose Abreu (2):
ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node
ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node
Jouni Malinen (1):
mac80211: Do not use stack memory with scatterlist for GMAC
Kaike Wan (1):
IB/hfi1: Validate fault injection opcode user input
Kamenee Arumugam (1):
IB/hfi1: Validate page aligned for a given virtual address
Linus Torvalds (1):
gcc-9: silence 'address-of-packed-member' warning
Manikanta Pubbisetty (1):
{nl,mac}80211: allow 4addr AP operation on crypto controlled devices
Marcel Holtmann (2):
Bluetooth: Align minimum encryption key size for LE and BR/EDR connections
Bluetooth: Fix regression with minimum encryption key size alignment
Mathias Nyman (2):
xhci: detect USB 3.2 capable host controllers correctly
usb: xhci: Don't try to recover an endpoint if port is in error state.
Miaohe Lin (1):
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
Michael Ellerman (1):
powerpc/mm/64s/hash: Reallocate context ids on fork
Miguel Ojeda (1):
tracing: Silence GCC 9 array bounds warning
Mike Marciniszyn (4):
IB/hfi1: Silence txreq allocation warnings IB/rdmavt: Fix alloc_qpn() WARN_ON()
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
Miklos Szeredi (1):
ovl: don't fail with disconnected lower NFS
Minwoo Im (1):
nvmet: fix data_len to 0 for bdev-backed write_zeroes
Naohiro Aota (1):
btrfs: start readahead also in seed devices
Naresh Kamboju (1):
selftests: vm: install test_vmalloc.sh for run_vmtests
Naveen N. Rao (1):
powerpc/bpf: use unsigned division instruction for 64-bit operations
Nikita Yushchenko (1):
net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0
Peter Chen (1):
usb: chipidea: udc: workaround for endpoint conflict issue
Raul E Rangel (1):
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
Robert Hancock (1):
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages
Robin Murphy (2):
drm/arm/hdlcd: Actually validate CRTC modes drm/arm/hdlcd: Allow a bit of clock tolerance
Scott Wood (2):
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: dfl: Add lockdep classes for pdata->lock
Sean Wang (2):
net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported
net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled
ShihPo Hung (1):
riscv: mm: synchronize MMU after pte change
Stanley Chu (1):
scsi: ufs: Avoid runtime suspend possibly being blocked forever
Steve French (1):
SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
Thomas Hellstrom (1):
drm/vmwgfx: Use the backdoor port if the HB port is not available
Ulf Hansson (1):
mmc: core: Prevent processing SDIO IRQs when the card is suspended
Vineet Gupta (1):
ARC: fix build warnings
Wen He (1):
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
Willem de Bruijn (1):
can: purge socket error queue on sock destruct
Yonglong Liu (1):
net: hns: Fix loopback test failed at copper ports
Young Xiao (1):
sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD
Yu Wang (1):
mac80211: handle deauthentication/disassociation from TDLS peer
YueHaibing (2):
parport: Fix mem leak in parport_register_dev_model
MIPS: uprobes: remove set but not used variable 'epc'
Greg KH
maintainerMakefile +2 -2
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 19 -SUBLEVEL = 55 +SUBLEVEL = 56 EXTRAVERSION = NAME = "People's Front"
@@ -652,6 +652,7 @@ KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation) KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow) KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context) +KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
@@ -696,7 +697,6 @@ ifeq ($(cc-name),clang) KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) KBUILD_CFLAGS += $(call cc-disable-warning, gnu) -KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) # Quiet clang warning: comparison of unsigned expression < 0 is always false KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
arch/arc/boot/dts/hsdk.dts +4 -0
@@ -175,6 +175,7 @@ interrupt-names = "macirq"; phy-mode = "rgmii"; snps,pbl = <32>; + snps,multicast-filter-bins = <256>; clocks = <&gmacclk>; clock-names = "stmmaceth"; phy-handle = <&phy0>;
@@ -183,6 +184,9 @@ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ dma-coherent; + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; + mdio { #address-cells = <1>; #size-cells = <0>;
arch/arc/include/asm/cmpxchg.h +10 -4
@@ -92,8 +92,11 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)#endif /* CONFIG_ARC_HAS_LLSC */ -#define cmpxchg (ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \ - (unsigned long)(o), (unsigned long)(n))) +#define cmpxchg (ptr, o, n) ({ \ + (typeof(*(ptr)))__cmpxchg((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n)); \ +})/* * atomic_cmpxchg is same as cmpxchg
@@ -198,8 +201,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr, return __xchg_bad_pointer(); } -#define xchg (ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \ - sizeof(*(ptr)))) +#define xchg (ptr, with) ({ \ + (typeof(*(ptr)))__xchg((unsigned long)(with), \ + (ptr), \ + sizeof(*(ptr))); \ +})#endif /* CONFIG_ARC_PLAT_EZNPS */
arch/arc/mm/tlb.c +8 -5
@@ -911,9 +911,11 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address, struct pt_regs *regs) {struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id ()].mmu; -unsigned int pd0[mmu->ways];unsigned long flags; -int set; +int set, n_ways = mmu->ways; + + n_ways =min (n_ways,4 ); +BUG_ON (mmu->ways >4 );local_irq_save (flags);
@@ -921,9 +923,10 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,for (set =0 ; set < mmu->sets; set++) {int is_valid, way; +unsigned int pd0[4 ];/* read out all the ways of current set */ -for (way =0 , is_valid =0 ; way < mmu->ways; way++) { +for (way =0 , is_valid =0 ; way < n_ways; way++) {write_aux_reg (ARC_REG_TLBINDEX ,SET_WAY_TO_IDX (mmu, set, way));write_aux_reg (ARC_REG_TLBCOMMAND , TLBRead);
@@ -937,14 +940,14 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,continue ;/* Scan the set for duplicate ways: needs a nested loop */ -for (way =0 ; way < mmu->ways -1 ; way++) { +for (way =0 ; way < n_ways -1 ; way++) {int n;if (!pd0[way])continue ; -for (n = way +1 ; n < mmu->ways; n++) { +for (n = way +1 ; n < n_ways; n++) {if (pd0[way] != pd0[n])continue ;
arch/arm/boot/dts/am57xx-idk-common.dtsi +1 -0
@@ -410,6 +410,7 @@ vqmmc-supply = <&ldo1_reg>; bus-width = <4>; cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + no-1-8-v; }; &mmc2 {
arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi +20 -20
@@ -22,7 +22,7 @@ * * Datamanual Revisions: * - * DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017 + * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018 * */
@@ -169,25 +169,25 @@ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf { pinctrl-pin-array = < - 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ - 0x194 A_DELAY_PS(0) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ - 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ - 0x1ac A_DELAY_PS(85) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ - 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ - 0x1b8 A_DELAY_PS(139) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ - 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ - 0x1c4 A_DELAY_PS(69) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ - 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ - 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ - 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ - 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ - 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ - 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ - 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ - 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ - 0x200 A_DELAY_PS(36) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ - 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ - 0x368 A_DELAY_PS(72) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(350) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(335) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(339) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(219) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(236) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(372) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ >; };
arch/arm/mach-imx/cpuidle-imx6sx.c +2 -1
@@ -15,6 +15,7 @@#include "common.h" #include "cpuidle.h" +#include "hardware.h" static int imx6sx_idle_finish (unsigned long val) {
@@ -110,7 +111,7 @@ int __init imx6sx_cpuidle_init(void)* except for power up sw2iso which need to be * larger than LDO ramp up time. */ -imx_gpc_set_arm_power_up_timing (0xf ,1 ); +imx_gpc_set_arm_power_up_timing (cpu_is_imx6sx () ?0xf :0x2 ,1 );imx_gpc_set_arm_power_down_timing (1 ,1 );return cpuidle_register (&imx6sx_cpuidle_driver,NULL );
arch/arm64/Makefile +1 -0
@@ -51,6 +51,7 @@ endif KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) KBUILD_CFLAGS += -fno-asynchronous-unwind-tables +KBUILD_CFLAGS += -Wno-psabi KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) KBUILD_CFLAGS += $(call cc-option,-mabi=lp64)
arch/arm64/include/uapi/asm/ptrace.h +3 -5
@@ -64,8 +64,6 @@#ifndef __ASSEMBLY__ -#include <linux/prctl.h> -/* * User structures for general purpose, floating point and debug registers. */
@@ -112,10 +110,10 @@ struct user_sve_header {/* * Common SVE_PT_* flags: -* These must be kept in sync with prctl interface in <linux/ptrace.h> +* These must be kept in sync with prctl interface in <linux/prctl.h> */ -#define SVE_PT_VL_INHERIT (PR_SVE_VL_INHERIT >> 16) -#define SVE_PT_VL_ONEXEC (PR_SVE_SET_VL_ONEXEC >> 16) +#define SVE_PT_VL_INHERIT ((1 << 17) /* PR_SVE_VL_INHERIT */ >> 16) +#define SVE_PT_VL_ONEXEC ((1 << 18) /* PR_SVE_SET_VL_ONEXEC */ >> 16)/*
arch/arm64/kernel/ssbd.c +1 -0
@@ -4,6 +4,7 @@*/ #include <linux/errno.h> +#include <linux/prctl.h> #include <linux/sched.h> #include <linux/thread_info.h>
arch/mips/kernel/uprobes.c +0 -3
@@ -112,9 +112,6 @@ int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs)*/ aup->resume_epc = regs->cp0_epc +4 ;if (insn_has_delay_slot ((union mips_instruction ) aup->insn[0 ])) { -unsigned long epc; - - epc = regs->cp0_epc;__compute_return_epc_for_insn (regs, (union mips_instruction ) aup->insn[0 ]); aup->resume_epc = regs->cp0_epc;
arch/parisc/math-emu/cnv_float.h +4 -4
@@ -60,19 +60,19 @@ ((exponent < (SGL_P -1 )) ? \ (Sall(sgl_value) << (SGL_EXP_LENGTH + 1 + exponent)) : FALSE) -#define Int_isinexact_to_sgl (int_value) (int_value << 33 - SGL_EXP_LENGTH) +#define Int_isinexact_to_sgl (int_value) ((int_value << 33 - SGL_EXP_LENGTH) != 0) #define Sgl_roundnearest_from_int(int_value,sgl_value) \ if (int_value & 1<<(SGL_EXP_LENGTH - 2)) /* round bit */ \ - if ((int_value << 34 - SGL_EXP_LENGTH) || Slow(sgl_value)) \ + if (((int_value << 34 - SGL_EXP_LENGTH) != 0) || Slow(sgl_value)) \ Sall(sgl_value)++#define Dint_isinexact_to_sgl (dint_valueA,dint_valueB) \ - ((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) || Dintp2(dint_valueB)) + (((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) != 0) || Dintp2(dint_valueB))#define Sgl_roundnearest_from_dint (dint_valueA,dint_valueB,sgl_value) \ if (Dintp1(dint_valueA) & 1<<(SGL_EXP_LENGTH - 2)) \ - if ((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) || \ + if (((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) != 0) || \ Dintp2(dint_valueB) || Slow(sgl_value)) Sall(sgl_value)++#define Dint_isinexact_to_dbl (dint_value) \
arch/powerpc/include/asm/ppc-opcode.h +1 -0
@@ -336,6 +336,7 @@#define PPC_INST_MULLI 0x1c000000#define PPC_INST_DIVWU 0x7c000396#define PPC_INST_DIVD 0x7c0003d2 +#define PPC_INST_DIVDU 0x7c000392#define PPC_INST_RLWINM 0x54000000#define PPC_INST_RLWIMI 0x50000000#define PPC_INST_RLDICL 0x78000000
arch/powerpc/mm/mmu_context_book3s64.c +42 -4
62 lines not on this page · raw message
arch/powerpc/net/bpf_jit.h +1 -1
@@ -116,7 +116,7 @@ ___PPC_RA(a) | IMM_L(i))#define PPC_DIVWU (d, a, b) EMIT(PPC_INST_DIVWU | ___PPC_RT(d) | \ ___PPC_RA(a) | ___PPC_RB(b)) -#define PPC_DIVD (d, a, b) EMIT(PPC_INST_DIVD | ___PPC_RT(d) | \ +#define PPC_DIVDU (d, a, b) EMIT(PPC_INST_DIVDU | ___PPC_RT(d) | \ ___PPC_RA(a) | ___PPC_RB(b))#define PPC_AND (d, a, b) EMIT(PPC_INST_AND | ___PPC_RA(d) | \ ___PPC_RS(a) | ___PPC_RB(b))
arch/powerpc/net/bpf_jit_comp64.c +4 -4
@@ -372,12 +372,12 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,case BPF_ALU64 |BPF_DIV |BPF_X :/* dst /= src */ case BPF_ALU64 |BPF_MOD |BPF_X :/* dst %= src */ if (BPF_OP (code) ==BPF_MOD ) { -PPC_DIVD (b2p[TMP_REG_1 ], dst_reg, src_reg); +PPC_DIVDU (b2p[TMP_REG_1 ], dst_reg, src_reg);PPC_MULD (b2p[TMP_REG_1 ], src_reg, b2p[TMP_REG_1 ]);PPC_SUB (dst_reg, dst_reg, b2p[TMP_REG_1 ]); }else -PPC_DIVD (dst_reg, dst_reg, src_reg); +PPC_DIVDU (dst_reg, dst_reg, src_reg);break ;case BPF_ALU |BPF_MOD |BPF_K :/* (u32) dst %= (u32) imm */ case BPF_ALU |BPF_DIV |BPF_K :/* (u32) dst /= (u32) imm */
@@ -405,7 +405,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,break ;case BPF_ALU64 :if (BPF_OP (code) ==BPF_MOD ) { -PPC_DIVD (b2p[TMP_REG_2 ], dst_reg, +PPC_DIVDU (b2p[TMP_REG_2 ], dst_reg, b2p[TMP_REG_1 ]); PPC_MULD(b2p[TMP_REG_1], b2p[TMP_REG_1],
@@ -413,7 +413,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,PPC_SUB (dst_reg, dst_reg, b2p[TMP_REG_1 ]); }else -PPC_DIVD (dst_reg, dst_reg, +PPC_DIVDU (dst_reg, dst_reg, b2p[TMP_REG_1 ]);break ; }
arch/riscv/mm/fault.c +13 -0
@@ -29,6 +29,7 @@#include <asm/pgalloc.h> #include <asm/ptrace.h> +#include <asm/tlbflush.h> /* * This routine handles page faults. It determines the address and the
@@ -281,6 +282,18 @@ asmlinkage void do_page_fault(struct pt_regs *regs) pte_k =pte_offset_kernel (pmd_k, addr);if (!pte_present (*pte_k)) goto no_context; + +/* +* The kernel assumes that TLBs don't cache invalid +* entries, but in RISC-V, SFENCE.VMA specifies an +* ordering constraint, not a cache flush; it is +* necessary even after writing invalid entries. +* Relying on flush_tlb_fix_spurious_fault would +* suffice, but the extra traps reduce +* performance. So, eagerly SFENCE.VMA. +*/ +local_flush_tlb_page (addr); +return ; } }
arch/s390/include/asm/ap.h +19 -9
@@ -221,16 +221,22 @@ static inline struct ap_queue_status ap_aqic(ap_qid_t qid, void *ind) { register unsigned long reg0 asm ("0") = qid | (3UL << 24); - register struct ap_qirq_ctrl reg1_in asm ("1") = qirqctrl; - registerstruct ap_queue_status reg1_out asm ("1" ); + registerunion { +unsigned long value; +struct ap_qirq_ctrl qirqctrl; +struct ap_queue_status status; + } reg1 asm ("1" ); register void *reg2 asm ("2") = ind; + reg1.qirqctrl = qirqctrl; + asmvolatile (".long 0xb2af0000" /* PQAP(AQIC) */ - :"=d" (reg1_out) - :"d" (reg0),"d" (reg1_in),"d" (reg2) + :"+d" (reg1) + :"d" (reg0),"d" (reg2) :"cc" ); -return reg1_out; + +return reg1.status; }/*
@@ -264,17 +270,21 @@ static inline struct ap_queue_status ap_qact(ap_qid_t qid, int ifbit, { register unsigned long reg0 asm ("0") = qid | (5UL << 24) | ((ifbit & 0x01) << 22); - register unsigned long reg1_in asm ("1") = apinfo->val; - registerstruct ap_queue_status reg1_out asm ("1" ); + registerunion { +unsigned long value; +struct ap_queue_status status; + } reg1 asm ("1" ); registerunsigned long reg2 asm ("2" ); + reg1.value = apinfo->val; + asmvolatile (".long 0xb2af0000" /* PQAP(QACT) */ - :"+d" (reg1_in),"=d" (reg1_out),"=d" (reg2) + :"+d" (reg1),"=d" (reg2) :"d" (reg0) :"cc" ); apinfo->val = reg2; -return reg1_out; +return reg1.status; }/**
arch/s390/include/asm/jump_label.h +10 -4
@@ -10,6 +10,12 @@#define JUMP_LABEL_NOP_SIZE 6#define JUMP_LABEL_NOP_OFFSET 2 +#if __GNUC__ <9 +#define JUMP_LABEL_STATIC_KEY_CONSTRAINT "X" +#else +#define JUMP_LABEL_STATIC_KEY_CONSTRAINT "jdd" +#endif +/* * We use a brcl 0,2 instruction for jump labels at compile time so it * can be easily distinguished from a hotpatch generated instruction.
@@ -19,9 +25,9 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran asm_volatile_goto("0: brcl 0,"__stringify(JUMP_LABEL_NOP_OFFSET)"\n" ".pushsection __jump_table, \"aw\"\n" ".balign 8\n" - ".quad 0b, %l[label], %0\n" + ".quad 0b, %l[label], %0+%1\n" ".popsection\n" - : : "X" (&((char *)key)[branch]) : : label); + : : JUMP_LABEL_STATIC_KEY_CONSTRAINT (key), "i" (branch) : : label);return false; label:
@@ -33,9 +39,9 @@ static __always_inline bool arch_static_branch_jump(struct static_key *key, boolasm_volatile_goto ("0: brcl 15, %l[label]\n" ".pushsection __jump_table, \"aw\"\n" ".balign 8\n" - ".quad 0b, %l[label], %0\n" +".quad 0b, %l[label], %0+%1\n" ".popsection\n" - : : "X" (&((char *)key)[branch]) : : label); + : : JUMP_LABEL_STATIC_KEY_CONSTRAINT (key), "i" (branch) : : label);return false; label:
arch/sparc/kernel/mdesc.c +2 -0
@@ -357,6 +357,8 @@ static int get_vdev_port_node_info(struct mdesc_handle *md, u64 node, node_info->vdev_port.id = *idp; node_info->vdev_port.name =kstrdup_const (name,GFP_KERNEL ); +if (!node_info->vdev_port.name) +return -1 ; node_info->vdev_port.parent_cfg_hdl = *parent_cfg_hdlp;return 0 ;
arch/sparc/kernel/perf_event.c +4 -0
@@ -891,6 +891,10 @@ static int sparc_perf_event_set_period(struct perf_event *event,s64 period = hwc->sample_period;int ret =0 ; +/* The period may have been changed by PERF_EVENT_IOC_PERIOD */ +if (unlikely (period != hwc->last_period)) + left = period - (hwc->last_period - left); +if (unlikely (left <= -period)) { left = period;local64_set (&hwc->period_left, left);
arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +1 -1
@@ -2379,7 +2379,7 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp)if (closid_allocated (i) && i != closid) { mode =rdtgroup_mode_by_closid (i);if (mode ==RDT_MODE_PSEUDO_LOCKSETUP ) -break ; +continue ; used_b |= *ctrl;if (mode ==RDT_MODE_SHAREABLE ) d->new_ctrl |= *ctrl;
arch/xtensa/kernel/setup.c +2 -1
@@ -310,7 +310,8 @@ extern char _SecondaryResetVector_text_start;extern char _SecondaryResetVector_text_end;#endif -static inline int mem_reserve (unsigned long start,unsigned long end) +static inline int __init_memblock mem_reserve(unsigned long start, +unsigned long end) {return memblock_reserve (start, end - start); }
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +2 -1
@@ -512,7 +512,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,return vchan_tx_prep (&chan->vc, &first->vd, flags); err_desc_get: -axi_desc_put (first); +if (first) +axi_desc_put (first);return NULL ; }
drivers/dma/sprd-dma.c +1 -1
@@ -663,7 +663,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, temp |= slave_cfg->src_maxburst &SPRD_DMA_FRG_LEN_MASK ; hw->frg_len = temp; - hw->blk_len = len &SPRD_DMA_BLK_LEN_MASK ; + hw->blk_len = slave_cfg->src_maxburst &SPRD_DMA_BLK_LEN_MASK ; hw->trsc_len = len &SPRD_DMA_TRSC_LEN_MASK ; temp = (dst_step &SPRD_DMA_TRSF_STEP_MASK ) <<SPRD_DMA_DEST_TRSF_STEP_OFFSET ;
drivers/fpga/dfl-afu-dma-region.c +1 -1
@@ -399,7 +399,7 @@ int afu_dma_map_region(struct dfl_feature_platform_data *pdata, region->pages[0 ],0 , region->length, DMA_BIDIRECTIONAL); -if (dma_mapping_error (&pdata->dev->dev, region->iova)) { +if (dma_mapping_error (dfl_fpga_pdata_to_parent (pdata), region->iova)) {dev_err (&pdata->dev->dev,"failed to map for dma\n" ); ret = -EFAULT ; goto unpin_pages;
drivers/fpga/dfl.c +15 -1
@@ -40,6 +40,13 @@ enum dfl_fpga_devt_type { DFL_FPGA_DEVT_MAX, }; +static struct lock_class_key dfl_pdata_keys[DFL_ID_MAX ]; + +static const char *dfl_pdata_key_strings[DFL_ID_MAX ] = { +"dfl-fme-pdata" , +"dfl-port-pdata" , +}; +/** * dfl_dev_info - dfl feature device information. * @name: name string of the feature platform device.
@@ -443,11 +450,16 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)struct platform_device *fdev = binfo->feature_dev;struct dfl_feature_platform_data *pdata;struct dfl_feature_info *finfo, *p; +enum dfl_id_type type;int ret, index =0 ;if (!fdev)return 0 ; + type =feature_dev_id_type (fdev); +if (WARN_ON_ONCE (type >=DFL_ID_MAX )) +return -EINVAL ; +/* * we do not need to care for the memory which is associated with * the platform device. After calling platform_device_unregister(),
@@ -463,6 +475,8 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo) pdata->num = binfo->feature_num; pdata->dfl_cdev = binfo->cdev;mutex_init (&pdata->lock); +lockdep_set_class_and_name (&pdata->lock, &dfl_pdata_keys[type], + dfl_pdata_key_strings[type]);/* * the count should be initialized to 0 to make sure
@@ -497,7 +511,7 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo) ret =platform_device_add (binfo->feature_dev);if (!ret) { -if (feature_dev_id_type (binfo->feature_dev) ==PORT_ID ) +if (type ==PORT_ID )dfl_fpga_cdev_add_port_dev (binfo->cdev, binfo->feature_dev);else
drivers/gpu/drm/arm/hdlcd_crtc.c +7 -7
@@ -186,20 +186,20 @@ static void hdlcd_crtc_atomic_disable(struct drm_crtc *crtc,clk_disable_unprepare (hdlcd->clk); } -static int hdlcd_crtc_atomic_check (struct drm_crtc *crtc, -struct drm_crtc_state *state) +static enum drm_mode_status hdlcd_crtc_mode_valid (struct drm_crtc *crtc, +const struct drm_display_mode *mode) {struct hdlcd_drm_private *hdlcd =crtc_to_hdlcd_priv (crtc); -struct drm_display_mode *mode = &state->adjusted_mode;long rate, clk_rate = mode->clock *1000 ; rate =clk_round_rate (hdlcd->clk, clk_rate); -if (rate != clk_rate) { +/* 0.1% seems a close enough tolerance for the TDA19988 on Juno */ +if (abs (rate - clk_rate) *1000 > clk_rate) {/* clock required by mode not supported by hardware */ -return -EINVAL ; +return MODE_NOCLOCK ; } -return 0 ; +return MODE_OK ; } static void hdlcd_crtc_atomic_begin(struct drm_crtc *crtc,
@@ -220,7 +220,7 @@ static void hdlcd_crtc_atomic_begin(struct drm_crtc *crtc, }static const struct drm_crtc_helper_funcs hdlcd_crtc_helper_funcs = { - .atomic_check = hdlcd_crtc_atomic_check, + .mode_valid = hdlcd_crtc_mode_valid, .atomic_begin = hdlcd_crtc_atomic_begin, .atomic_enable = hdlcd_crtc_atomic_enable, .atomic_disable = hdlcd_crtc_atomic_disable,
drivers/gpu/drm/arm/malidp_drv.c +12 -1
@@ -190,6 +190,7 @@ static void malidp_atomic_commit_hw_done(struct drm_atomic_state *state) {struct drm_device *drm = state->dev;struct malidp_drm *malidp = drm->dev_private; +int loop =5 ; malidp->event = malidp->crtc.state->event; malidp->crtc.state->event =NULL ;
@@ -204,8 +205,18 @@ static void malidp_atomic_commit_hw_done(struct drm_atomic_state *state)drm_crtc_vblank_get (&malidp->crtc);/* only set config_valid if the CRTC is enabled */ -if (malidp_set_and_wait_config_valid (drm) <0 ) +if (malidp_set_and_wait_config_valid (drm) <0 ) { +/* +* make a loop around the second CVAL setting and +* try 5 times before giving up. +*/ +while (loop--) { +if (!malidp_set_and_wait_config_valid (drm)) +break ; + }DRM_DEBUG_DRIVER ("timed out waiting for updated configuration\n" ); + } + }else if (malidp->event) {/* CRTC inactive means vblank IRQ is disabled, send event directly */ spin_lock_irq (&drm->event_lock);
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c +117 -29
189 lines not on this page · raw message
drivers/hwmon/hwmon.c +1 -1
@@ -619,7 +619,7 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,if (err) goto free_hwmon; -if (dev && chip && chip->ops->read && +if (dev && dev->of_node && chip && chip->ops->read && chip->info[0 ]->type == hwmon_chip && (chip->info[0 ]->config[0 ] &HWMON_C_REGISTER_TZ )) {const struct hwmon_channel_info **info = chip->info;
drivers/hwmon/pmbus/pmbus_core.c +30 -4
@@ -1230,7 +1230,8 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,const struct pmbus_driver_info *info, const char *name, int index, int page, - const struct pmbus_sensor_attr *attr) + const struct pmbus_sensor_attr *attr, + bool paged) { struct pmbus_sensor *base;bool upper = !!(attr->gbit &0xff00 );/* need to check STATUS_WORD */
@@ -1238,7 +1239,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,if (attr->label) { ret =pmbus_add_label (data, name, index, attr->label, - attr->paged ? page +1 :0 ); + paged ? page +1 :0 );if (ret)return ret; }
@@ -1271,6 +1272,30 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,return 0 ; } +static bool pmbus_sensor_is_paged (const struct pmbus_driver_info *info, +const struct pmbus_sensor_attr *attr) +{ +int p; + +if (attr->paged) +return true; + +/* +* Some attributes may be present on more than one page despite +* not being marked with the paged attribute. If that is the case, +* then treat the sensor as being paged and add the page suffix to the +* attribute name. +* We don't just add the paged attribute to all such attributes, in +* order to maintain the un-suffixed labels in the case where the +* attribute is only on page 0. +*/ +for (p =1 ; p < info->pages; p++) { +if (info->func[p] & attr->func) +return true; + } +return false; +} + static int pmbus_add_sensor_attrs(struct i2c_client *client, struct pmbus_data *data, const char *name,
@@ -1284,14 +1309,15 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client, index =1 ;for (i =0 ; i < nattrs; i++) {int page, pages; +bool paged =pmbus_sensor_is_paged (info, attrs); - pages = attrs->paged ? info->pages :1 ; + pages = paged ? info->pages :1 ;for (page =0 ; page < pages; page++) {if (!(info->func[page] & attrs->func))continue ; ret =pmbus_add_sensor_attrs_one (client, data, info, name, index, page, - attrs); + attrs, paged);if (ret)return ret; index++;
drivers/iio/temperature/mlx90632.c +7 -2
@@ -81,6 +81,8 @@/* Magic constants */ #define MLX90632_ID_MEDICAL 0x0105/* EEPROM DSPv5 Medical device id */ #define MLX90632_ID_CONSUMER 0x0205/* EEPROM DSPv5 Consumer device id */ +#define MLX90632_DSP_VERSION 5/* DSP version */ +#define MLX90632_DSP_MASK GENMASK(7, 0)/* DSP version in EE_VERSION */ #define MLX90632_RESET_CMD 0x0006/* Reset sensor (address or global) */ #define MLX90632_REF_12 12LL/**< ResCtrlRef value of Ch 1 or Ch 2 */ #define MLX90632_REF_3 12LL/**< ResCtrlRef value of Channel 3 */
@@ -666,10 +668,13 @@ static int mlx90632_probe(struct i2c_client *client, }else if (read ==MLX90632_ID_CONSUMER ) {dev_dbg (&client->dev,"Detected Consumer EEPROM calibration %x\n" , read); + }else if ((read &MLX90632_DSP_MASK ) ==MLX90632_DSP_VERSION ) { +dev_dbg (&client->dev, +"Detected Unknown EEPROM calibration %x\n" , read); }else {dev_err (&client->dev, -"EEPROM version mismatch %x (expected %x or %x)\n" , - read,MLX90632_ID_CONSUMER ,MLX90632_ID_MEDICAL ); +"Wrong DSP version %x (expected %x)\n" , + read,MLX90632_DSP_VERSION );return -EPROTONOSUPPORT ; }
drivers/infiniband/hw/hfi1/chip.c +1 -0
@@ -9849,6 +9849,7 @@ void hfi1_quiet_serdes(struct hfi1_pportdata *ppd)/* disable the port */ clear_rcvctrl (dd,RCV_CTRL_RCV_PORT_ENABLE_SMASK ); +cancel_work_sync (&ppd->freeze_work); }static inline int init_cpu_counters (struct hfi1_devdata *dd)
drivers/infiniband/hw/hfi1/fault.c +5 -0
@@ -153,6 +153,7 @@ static ssize_t fault_opcodes_write(struct file *file, const char __user *buf,char *dash;unsigned long range_start, range_end, i;bool remove = false; +unsigned long bound =1U <<BITS_PER_BYTE ; end =strchr (ptr,',' );if (end)
@@ -178,6 +179,10 @@ static ssize_t fault_opcodes_write(struct file *file, const char __user *buf, BITS_PER_BYTE);break ; } +/* Check the inputs */ +if (range_start >= bound || range_end >= bound) +break ; +for (i = range_start; i <= range_end; i++) {if (remove)clear_bit (i, fault->opcodes);
drivers/infiniband/hw/hfi1/user_exp_rcv.c +3 -0
@@ -324,6 +324,9 @@ int hfi1_user_exp_rcv_setup(struct hfi1_filedata *fd,u32 *tidlist =NULL ;struct tid_user_buf *tidbuf; +if (!PAGE_ALIGNED (tinfo->vaddr)) +return -EINVAL ; + tidbuf =kzalloc (sizeof (*tidbuf),GFP_KERNEL );if (!tidbuf)return -ENOMEM ;
drivers/infiniband/hw/hfi1/verbs.c +0 -2
@@ -1418,8 +1418,6 @@ static void hfi1_fill_device_attr(struct hfi1_devdata *dd) rdi->dparms.props.max_cq = hfi1_max_cqs; rdi->dparms.props.max_ah = hfi1_max_ahs; rdi->dparms.props.max_cqe = hfi1_max_cqes; - rdi->dparms.props.max_mr = rdi->lkey_table.max; - rdi->dparms.props.max_fmr = rdi->lkey_table.max; rdi->dparms.props.max_map_per_fmr =32767 ; rdi->dparms.props.max_pd = hfi1_max_pds; rdi->dparms.props.max_qp_rd_atom =HFI1_MAX_RDMA_ATOMIC ;
drivers/infiniband/hw/hfi1/verbs_txreq.c +1 -1
@@ -100,7 +100,7 @@ struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev,if (ib_rvt_state_ops[qp->state] &RVT_PROCESS_RECV_OK ) {struct hfi1_qp_priv *priv; - tx =kmem_cache_alloc (dev->verbs_txreq_cache,GFP_ATOMIC ); + tx =kmem_cache_alloc (dev->verbs_txreq_cache,VERBS_TXREQ_GFP );if (tx) goto out; priv = qp->priv;
drivers/infiniband/hw/hfi1/verbs_txreq.h +2 -1
@@ -72,6 +72,7 @@ struct hfi1_ibdev;struct verbs_txreq *__get_txreq (struct hfi1_ibdev *dev,struct rvt_qp *qp); +#define VERBS_TXREQ_GFP (GFP_ATOMIC | __GFP_NOWARN)static inline struct verbs_txreq *get_txreq (struct hfi1_ibdev *dev,struct rvt_qp *qp) __must_hold(&qp->slock)
@@ -79,7 +80,7 @@ static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev,struct verbs_txreq *tx;struct hfi1_qp_priv *priv = qp->priv; - tx =kmem_cache_alloc (dev->verbs_txreq_cache,GFP_ATOMIC ); + tx =kmem_cache_alloc (dev->verbs_txreq_cache,VERBS_TXREQ_GFP );if (unlikely (!tx)) {/* call slow path to get the lock */ tx =__get_txreq (dev, qp);
drivers/infiniband/hw/qib/qib_verbs.c +0 -2
@@ -1495,8 +1495,6 @@ static void qib_fill_device_attr(struct qib_devdata *dd) rdi->dparms.props.max_cq = ib_qib_max_cqs; rdi->dparms.props.max_cqe = ib_qib_max_cqes; rdi->dparms.props.max_ah = ib_qib_max_ahs; - rdi->dparms.props.max_mr = rdi->lkey_table.max; - rdi->dparms.props.max_fmr = rdi->lkey_table.max; rdi->dparms.props.max_map_per_fmr =32767 ; rdi->dparms.props.max_qp_rd_atom =QIB_MAX_RDMA_ATOMIC ; rdi->dparms.props.max_qp_init_rd_atom =255 ;
drivers/infiniband/sw/rdmavt/mr.c +2 -0
@@ -96,6 +96,8 @@ int rvt_driver_mr_init(struct rvt_dev_info *rdi)for (i =0 ; i < rdi->lkey_table.max; i++)RCU_INIT_POINTER (rdi->lkey_table.table[i],NULL ); + rdi->dparms.props.max_mr = rdi->lkey_table.max; + rdi->dparms.props.max_fmr = rdi->lkey_table.max;return 0 ; }
drivers/infiniband/sw/rdmavt/qp.c +2 -1
@@ -412,7 +412,8 @@ static int alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt, offset = qpt->incr | ((offset &1 ) ^1 ); }/* there can be no set bits in low-order QoS bits */ -WARN_ON (offset & (BIT (rdi->dparms.qos_shift) -1 )); +WARN_ON (rdi->dparms.qos_shift >1 && + offset & ((BIT (rdi->dparms.qos_shift -1 ) -1 ) <<1 )); qpn =mk_qpn (qpt, map, offset); }
drivers/input/misc/uinput.c +20 -2
@@ -1051,13 +1051,31 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)#ifdef CONFIG_COMPAT -#define UI_SET_PHYS_COMPAT _IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t) +/* +* These IOCTLs change their size and thus their numbers between +* 32 and 64 bits. +*/ +#define UI_SET_PHYS_COMPAT \ + _IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t) +#define UI_BEGIN_FF_UPLOAD_COMPAT \ + _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload_compat) +#define UI_END_FF_UPLOAD_COMPAT \ + _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload_compat)static long uinput_compat_ioctl (struct file *file,unsigned int cmd,unsigned long arg) { -if (cmd ==UI_SET_PHYS_COMPAT ) +switch (cmd) { +case UI_SET_PHYS_COMPAT : cmd =UI_SET_PHYS ; +break ; +case UI_BEGIN_FF_UPLOAD_COMPAT : + cmd =UI_BEGIN_FF_UPLOAD ; +break ; +case UI_END_FF_UPLOAD_COMPAT : + cmd =UI_END_FF_UPLOAD ; +break ; + }return uinput_ioctl_handler (file, cmd, arg,compat_ptr (arg)); }
drivers/input/mouse/synaptics.c +2 -0
@@ -179,6 +179,8 @@ static const char * const smbus_pnp_ids[] = {"LEN0096" ,/* X280 */ "LEN0097" ,/* X280 -> ALPS trackpoint */ "LEN200f" ,/* T450s */ +"LEN2054" ,/* E480 */ +"LEN2055" ,/* E580 */ "SYN3052" ,/* HP EliteBook 840 G4 */ "SYN3221" ,/* HP 15-ay000 */ NULL
drivers/input/touchscreen/silead.c +1 -0
@@ -604,6 +604,7 @@ static const struct acpi_device_id silead_ts_acpi_match[] = { { "MSSL1680", 0 }, { "MSSL0001", 0 }, { "MSSL0002", 0 }, + { "MSSL0017", 0 }, { } };MODULE_DEVICE_TABLE (acpi, silead_ts_acpi_match);
drivers/mmc/core/core.c +3 -2
@@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)int err = cmd->error;/* Flag re-tuning needed on CRC errors */ -if ((cmd->opcode !=MMC_SEND_TUNING_BLOCK && - cmd->opcode !=MMC_SEND_TUNING_BLOCK_HS200 ) && +if (cmd->opcode !=MMC_SEND_TUNING_BLOCK && + cmd->opcode !=MMC_SEND_TUNING_BLOCK_HS200 && + !host->retune_crc_disable && (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ ) || (mrq->data && mrq->data->error == -EILSEQ ) || (mrq->stop && mrq->stop->error == -EILSEQ )))
drivers/mmc/core/sdio.c +12 -1
@@ -934,6 +934,10 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)*/ static int mmc_sdio_suspend (struct mmc_host *host) { +/* Prevent processing of SDIO IRQs in suspended state. */ +mmc_card_set_suspended (host->card); +cancel_delayed_work_sync (&host->sdio_irq_work); +mmc_claim_host (host);if (mmc_card_keep_power (host) &&mmc_card_wake_sdio_irq (host))
@@ -982,13 +986,20 @@ static int mmc_sdio_resume(struct mmc_host *host) err =sdio_enable_4bit_bus (host->card); } -if (!err && host->sdio_irqs) { +if (err) + goto out; + +/* Allow SDIO IRQs to be processed again. */ +mmc_card_clr_suspended (host->card); + +if (host->sdio_irqs) {if (!(host->caps2 &MMC_CAP2_SDIO_IRQ_NOTHREAD ))wake_up_process (host->sdio_irq_thread);else if (host->caps &MMC_CAP_SDIO_IRQ ) host->ops->enable_sdio_irq (host,1 ); } +out:mmc_release_host (host); host->pm_flags &= ~MMC_PM_KEEP_POWER ;
drivers/mmc/core/sdio_io.c +77 -0
86 lines not on this page · raw message
drivers/mmc/core/sdio_irq.c +4 -0
@@ -38,6 +38,10 @@ static int process_sdio_pending_irqs(struct mmc_host *host)unsigned char pending;struct sdio_func *func; +/* Don't process SDIO IRQs if the card is suspended. */ +if (mmc_card_suspended (card)) +return 0 ; +/* * Optimization, if there is only 1 function interrupt registered * and we know an IRQ was signaled then call irq handler directly.
drivers/mmc/host/sdhci-pci-o2micro.c +4 -1
@@ -117,6 +117,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)*/ if (mmc->ios.bus_width ==MMC_BUS_WIDTH_8 ) { current_bus_width = mmc->ios.bus_width; + mmc->ios.bus_width =MMC_BUS_WIDTH_4 ;sdhci_set_bus_width (host,MMC_BUS_WIDTH_4 ); }
@@ -128,8 +129,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)sdhci_end_tuning (host); -if (current_bus_width ==MMC_BUS_WIDTH_8 ) +if (current_bus_width ==MMC_BUS_WIDTH_8 ) { + mmc->ios.bus_width =MMC_BUS_WIDTH_8 ;sdhci_set_bus_width (host, current_bus_width); + } host->flags &= ~SDHCI_HS400_TUNING ;return 0 ;
drivers/net/can/flexcan.c +1 -1
@@ -165,7 +165,7 @@#define FLEXCAN_MB_CNT_LENGTH (x) (((x) & 0xf) << 16)#define FLEXCAN_MB_CNT_TIMESTAMP (x) ((x) & 0xffff) -#define FLEXCAN_TIMEOUT_US (50) +#define FLEXCAN_TIMEOUT_US (250)/* FLEXCAN hardware feature flags *
drivers/net/can/xilinx_can.c +1 -1
@@ -1424,7 +1424,7 @@ static const struct xcan_devtype_data xcan_canfd_data = {XCAN_FLAG_RXMNF |XCAN_FLAG_TX_MAILBOXES | XCAN_FLAG_RX_FIFO_MULTI, - .bittiming_const = &xcan_bittiming_const, + .bittiming_const = &xcan_bittiming_const_canfd, .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD, .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD, .bus_clk_name = "s_axi_aclk",
drivers/net/dsa/mv88e6xxx/chip.c +1 -1
@@ -1484,7 +1484,7 @@ static int mv88e6xxx_vtu_get(struct mv88e6xxx_chip *chip, u16 vid,int err;if (!vid) -return -EINVAL ; +return -EOPNOTSUPP ; entry->vid = vid -1 ; entry->valid = false;
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +4 -0
@@ -339,6 +339,7 @@ static int __lb_setup(struct net_device *ndev,static int __lb_up (struct net_device *ndev,enum hnae_loop loop_mode) { +#define NIC_LB_TEST_WAIT_PHY_LINK_TIME 300struct hns_nic_priv *priv =netdev_priv (ndev);struct hnae_handle *h = priv->ae_handle;int speed, duplex;
@@ -365,6 +366,9 @@ static int __lb_up(struct net_device *ndev, h->dev->ops->adjust_link (h, speed, duplex); +/* wait adjust link done and phy ready */ +msleep (NIC_LB_TEST_WAIT_PHY_LINK_TIME ); +return 0 ; }
drivers/net/ethernet/mediatek/mtk_eth_soc.c +8 -7
@@ -1784,6 +1784,7 @@ static void mtk_poll_controller(struct net_device *dev)static int mtk_start_dma (struct mtk_eth *eth) { +u32 rx_2b_offset = (NET_IP_ALIGN ==2 ) ?MTK_RX_2B_OFFSET :0 ;int err; err =mtk_dma_init (eth);
@@ -1800,7 +1801,7 @@ static int mtk_start_dma(struct mtk_eth *eth) MTK_QDMA_GLO_CFG);mtk_w32 (eth, -MTK_RX_DMA_EN |MTK_RX_2B_OFFSET | +MTK_RX_DMA_EN | rx_2b_offset |MTK_RX_BT_32DWORDS |MTK_MULTI_EN ,MTK_PDMA_GLO_CFG );
@@ -2304,13 +2305,13 @@ static int mtk_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,switch (cmd->cmd) {case ETHTOOL_GRXRINGS : -if (dev->features &NETIF_F_LRO ) { +if (dev->hw_features &NETIF_F_LRO ) { cmd->data =MTK_MAX_RX_RING_NUM ; ret =0 ; }break ;case ETHTOOL_GRXCLSRLCNT : -if (dev->features &NETIF_F_LRO ) { +if (dev->hw_features &NETIF_F_LRO ) {struct mtk_mac *mac =netdev_priv (dev); cmd->rule_cnt = mac->hwlro_ip_cnt;
@@ -2318,11 +2319,11 @@ static int mtk_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, }break ;case ETHTOOL_GRXCLSRULE : -if (dev->features &NETIF_F_LRO ) +if (dev->hw_features &NETIF_F_LRO ) ret =mtk_hwlro_get_fdir_entry (dev, cmd);break ;case ETHTOOL_GRXCLSRLALL : -if (dev->features &NETIF_F_LRO ) +if (dev->hw_features &NETIF_F_LRO ) ret =mtk_hwlro_get_fdir_all (dev, cmd, rule_locs);break ;
@@ -2339,11 +2340,11 @@ static int mtk_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)switch (cmd->cmd) {case ETHTOOL_SRXCLSRLINS : -if (dev->features &NETIF_F_LRO ) +if (dev->hw_features &NETIF_F_LRO ) ret =mtk_hwlro_add_ipaddr (dev, cmd);break ;case ETHTOOL_SRXCLSRLDEL : -if (dev->features &NETIF_F_LRO ) +if (dev->hw_features &NETIF_F_LRO ) ret =mtk_hwlro_del_ipaddr (dev, cmd);break ;default :
drivers/net/ipvlan/ipvlan_main.c +1 -1
@@ -178,7 +178,7 @@ static void ipvlan_port_destroy(struct net_device *dev) }#define IPVLAN_FEATURES \ - (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \ + (NETIF_F_SG | NETIF_F_CSUM_MASK | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \ NETIF_F_GSO | NETIF_F_TSO | NETIF_F_GSO_ROBUST | \ NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO | NETIF_F_RXCSUM | \ NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +11 -0
@@ -667,6 +667,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)brcmf_dbg (TRACE ,"Enter: on=%d\n" , on); +sdio_retune_crc_disable (bus->sdiodev->func1); + +/* Cannot re-tune if device is asleep; defer till we're awake */ +if (on) +sdio_retune_hold_now (bus->sdiodev->func1); + wr_val = (on <<SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT );/* 1st KSO write goes to AOS wake up core if device is asleep */ brcmf_sdiod_writeb (bus->sdiodev,SBSDIO_FUNC1_SLEEPCSR , wr_val, &err);
@@ -719,6 +725,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)if (try_cnt >MAX_KSO_ATTEMPTS )brcmf_err ("max tries: rd_val=0x%x err=%d\n" , rd_val, err); +if (on) +sdio_retune_release (bus->sdiodev->func1); + +sdio_retune_crc_enable (bus->sdiodev->func1); +return err; }
drivers/nvme/host/core.c +2 -1
@@ -3228,7 +3228,8 @@ static int nvme_scan_ns_list(struct nvme_ctrl *ctrl, unsigned nn) {struct nvme_ns *ns;__le32 *ns_list; -unsigned i, j, nsid, prev =0 , num_lists =DIV_ROUND_UP (nn,1024 ); +unsigned i, j, nsid, prev =0 ; +unsigned num_lists =DIV_ROUND_UP_ULL ((u64 )nn,1024 );int ret =0 ; ns_list =kzalloc (NVME_IDENTIFY_DATA_SIZE ,GFP_KERNEL );
drivers/nvme/target/io-cmd-bdev.c +1 -0
@@ -239,6 +239,7 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)return 0 ;case nvme_cmd_write_zeroes: req->execute = nvmet_bdev_execute_write_zeroes; + req->data_len =0 ;return 0 ;default : pr_err("unhandled cmd %d on qid %d\n", cmd->common.opcode,
drivers/parport/share.c +2 -0
@@ -895,6 +895,7 @@ parport_register_dev_model(struct parport *port, const char *name, par_dev->devmodel = true; ret =device_register (&par_dev->dev);if (ret) { +kfree (par_dev->state);put_device (&par_dev->dev); goto err_put_port; }
@@ -912,6 +913,7 @@ parport_register_dev_model(struct parport *port, const char *name,spin_unlock (&port->physport->pardevice_lock);pr_debug ("%s: cannot grant exclusive access for device %s\n" , port->name, name); +kfree (par_dev->state);device_unregister (&par_dev->dev); goto err_put_port; }
drivers/s390/net/qeth_l2_main.c +1 -1
@@ -1901,7 +1901,7 @@ static void qeth_bridgeport_an_set_cb(void *priv, l2entry = (struct qdio_brinfo_entry_l2 *)entry; code =IPA_ADDR_CHANGE_CODE_MACADDR ; -if (l2entry->addr_lnid.lnid) +if (l2entry->addr_lnid.lnid <VLAN_N_VID ) code |=IPA_ADDR_CHANGE_CODE_VLANID ; qeth_bridge_emit_host_event(card, anev_reg_unreg, code, (struct net_if_token *)&l2entry->nit,
drivers/scsi/smartpqi/smartpqi_init.c +4 -2
@@ -3697,8 +3697,10 @@ static int pqi_submit_raid_request_synchronous(struct pqi_ctrl_info *ctrl_info,return -ETIMEDOUT ; msecs_blocked =jiffies_to_msecs (jiffies - start_jiffies); -if (msecs_blocked >= timeout_msecs) -return -ETIMEDOUT ; +if (msecs_blocked >= timeout_msecs) { + rc = -ETIMEDOUT ; + goto out; + } timeout_msecs -= msecs_blocked; } }
drivers/scsi/ufs/ufshcd-pltfrm.c +4 -7
@@ -340,24 +340,21 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, goto dealloc_host; } -pm_runtime_set_active (&pdev->dev); -pm_runtime_enable (&pdev->dev); -ufshcd_init_lanes_per_dir (hba); err =ufshcd_init (hba, mmio_base, irq);if (err) {dev_err (dev,"Initialization failed\n" ); - goto out_disable_rpm; + goto dealloc_host; }platform_set_drvdata (pdev, hba); +pm_runtime_set_active (&pdev->dev); +pm_runtime_enable (&pdev->dev); +return 0 ; -out_disable_rpm: -pm_runtime_disable (&pdev->dev); -pm_runtime_set_suspended (&pdev->dev); dealloc_host:ufshcd_dealloc_host (hba); out:
drivers/scsi/ufs/ufshcd.c +2 -1
@@ -1914,7 +1914,8 @@ int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)memcpy (&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr,QUERY_OSF_SIZE );/* Get the descriptor */ -if (lrbp->ucd_rsp_ptr->qr.opcode ==UPIU_QUERY_OPCODE_READ_DESC ) { +if (hba->dev_cmd.query.descriptor && + lrbp->ucd_rsp_ptr->qr.opcode ==UPIU_QUERY_OPCODE_READ_DESC ) {u8 *descp = (u8 *)lrbp->ucd_rsp_ptr +GENERAL_UPIU_REQUEST_SIZE ;u16 resp_len;
drivers/staging/erofs/erofs_fs.h +10 -3
@@ -17,10 +17,16 @@#define EROFS_SUPER_MAGIC_V1 0xE0F5E1E2#define EROFS_SUPER_OFFSET 1024 +/* +* Any bits that aren't in EROFS_ALL_REQUIREMENTS should be +* incompatible with this kernel version. +*/ +#define EROFS_ALL_REQUIREMENTS 0 +struct erofs_super_block {/* 0 */ __le32 magic;/* in the little endian */ /* 4 */ __le32 checksum;/* crc32c(super_block) */ -/* 8 */ __le32 features; +/* 8 */ __le32 features;/* (aka. feature_compat) */ /* 12 */ __u8 blkszbits;/* support block_size == PAGE_SIZE only */ /* 13 */ __u8 reserved;
@@ -34,9 +40,10 @@ struct erofs_super_block {/* 44 */ __le32 xattr_blkaddr;/* 48 */ __u8 uuid[16 ];/* 128-bit uuid for volume */ /* 64 */ __u8 volume_name[16 ];/* volume name */ +/* 80 */ __le32 requirements;/* (aka. feature_incompat) */ -/* 80 */ __u8 reserved2[48 ];/* 128 bytes */ -} __packed; +/* 84 */ __u8 reserved2[44 ]; +} __packed;/* 128 bytes */ #define __EROFS_BIT (_prefix, _cur, _pre) enum { \ _prefix ## _cur ## _BIT = _prefix ## _pre ## _BIT + \
drivers/staging/erofs/internal.h +2 -0
@@ -111,6 +111,8 @@ struct erofs_sb_info {u8 uuid[16 ];/* 128-bit uuid for volume */ u8 volume_name[16 ];/* volume name */ +u32 requirements; +char *dev_name;unsigned int mount_opt;
drivers/staging/erofs/super.c +19 -0
@@ -75,6 +75,22 @@ static void destroy_inode(struct inode *inode)call_rcu (&inode->i_rcu, i_callback); } +static bool check_layout_compatibility (struct super_block *sb, +struct erofs_super_block *layout) +{ +const unsigned int requirements =le32_to_cpu (layout->requirements); + +EROFS_SB (sb)->requirements = requirements; + +/* check if current kernel meets all mandatory requirements */ +if (requirements & (~EROFS_ALL_REQUIREMENTS )) { +errln ("unidentified requirements %x, please upgrade kernel version" , + requirements & ~EROFS_ALL_REQUIREMENTS ); +return false; + } +return true; +} +static int superblock_read (struct super_block *sb) {struct erofs_sb_info *sbi;
@@ -108,6 +124,9 @@ static int superblock_read(struct super_block *sb) goto out; } +if (!check_layout_compatibility (sb, layout)) + goto out; + sbi->blocks =le32_to_cpu (layout->blocks); sbi->meta_blkaddr =le32_to_cpu (layout->meta_blkaddr);#ifdef CONFIG_EROFS_FS_XATTR
drivers/usb/chipidea/udc.c +20 -0
@@ -1621,6 +1621,25 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)static int ci_udc_start (struct usb_gadget *gadget,struct usb_gadget_driver *driver);static int ci_udc_stop (struct usb_gadget *gadget); + +/* Match ISOC IN from the highest endpoint */ +static struct usb_ep *ci_udc_match_ep (struct usb_gadget *gadget, +struct usb_endpoint_descriptor *desc, +struct usb_ss_ep_comp_descriptor *comp_desc) +{ + struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); +struct usb_ep *ep; + +if (usb_endpoint_xfer_isoc (desc) &&usb_endpoint_dir_in (desc)) { +list_for_each_entry_reverse (ep, &ci->gadget.ep_list, ep_list) { +if (ep->caps.dir_in && !ep->claimed) +return ep; + } + } + +return NULL ; +} +/** * Device operations part of the API to the USB controller hardware, * which don't involve endpoints (or i/o)
@@ -1634,6 +1653,7 @@ static const struct usb_gadget_ops usb_gadget_ops = { .vbus_draw = ci_udc_vbus_draw, .udc_start = ci_udc_start, .udc_stop = ci_udc_stop, + .match_ep = ci_udc_match_ep, };static int init_eps (struct ci_hdrc *ci)
drivers/usb/host/xhci-ring.c +14 -1
@@ -1604,8 +1604,13 @@ static void handle_port_status(struct xhci_hcd *xhci,usb_hcd_resume_root_hub (hcd); } -if (hcd->speed >=HCD_USB3 && (portsc &PORT_PLS_MASK ) ==XDEV_INACTIVE ) +if (hcd->speed >=HCD_USB3 && + (portsc &PORT_PLS_MASK ) ==XDEV_INACTIVE ) { + slot_id =xhci_find_slot_id_by_port (hcd, xhci, hcd_portnum +1 ); +if (slot_id && xhci->devs[slot_id]) + xhci->devs[slot_id]->flags |=VDEV_PORT_ERROR ; bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); + }if ((portsc &PORT_PLC ) && (portsc &PORT_PLS_MASK ) ==XDEV_RESUME ) {xhci_dbg (xhci,"port resume event for port %d\n" , port_id);
@@ -1793,6 +1798,14 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, {struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];struct xhci_command *command; + +/* +* Avoid resetting endpoint if link is inactive. Can cause host hang. +* Device will be reset soon to recover the link so don't do anything +*/ +if (xhci->devs[slot_id]->flags &VDEV_PORT_ERROR ) +return ; + command =xhci_alloc_command (xhci, false,GFP_ATOMIC );if (!command)return ;
drivers/usb/host/xhci.c +20 -5
@@ -1441,6 +1441,10 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flagxhci_dbg (xhci,"urb submitted during PCI suspend\n" );return -ESHUTDOWN ; } +if (xhci->devs[slot_id]->flags &VDEV_PORT_ERROR ) { +xhci_dbg (xhci,"Can't queue urb, port error, link inactive\n" ); +return -ENODEV ; + }if (usb_endpoint_xfer_isoc (&urb->ep->desc)) num_tds = urb->number_of_packets;
@@ -3724,6 +3728,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, }/* If necessary, update the number of active TTs on this root port */ xhci_update_tt_active_eps (xhci, virt_dev, old_active_eps); + virt_dev->flags =0 ; ret =0 ; command_cleanup:
@@ -5030,16 +5035,26 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) }else {/* * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol -* minor revision instead of sbrn +* minor revision instead of sbrn. Minor revision is a two digit +* BCD containing minor and sub-minor numbers, only show minor. */ - minor_rev = xhci->usb3_rhub.min_rev; -if (minor_rev) { + minor_rev = xhci->usb3_rhub.min_rev /0x10 ; + +switch (minor_rev) { +case 2 : + hcd->speed =HCD_USB32 ; + hcd->self.root_hub->speed =USB_SPEED_SUPER_PLUS ; + hcd->self.root_hub->rx_lanes =2 ; + hcd->self.root_hub->tx_lanes =2 ; +break ; +case 1 : hcd->speed =HCD_USB31 ; hcd->self.root_hub->speed =USB_SPEED_SUPER_PLUS ; +break ; } -xhci_info (xhci,"Host supports USB 3.%x %s SuperSpeed\n" , +xhci_info (xhci,"Host supports USB 3.%x %sSuperSpeed\n" , minor_rev, - minor_rev ?"Enhanced" :"" ); + minor_rev ?"Enhanced " :"" ); xhci->usb3_rhub.hcd = hcd;/* xHCI private pointer was set in xhci_pci_probe for the second
drivers/usb/host/xhci.h +9 -0
@@ -1010,6 +1010,15 @@ struct xhci_virt_device {u8 real_port;struct xhci_interval_bw_table *bw_table;struct xhci_tt_bw_info *tt_info; +/* +* flags for state tracking based on events and issued commands. +* Software can not rely on states from output contexts because of +* latency between events and xHC updating output context values. +* See xhci 1.1 section 4.8.3 for more details +*/ +unsigned long flags; +#define VDEV_PORT_ERROR BIT(0)/* Port error, link inactive */ +/* The current max exit latency for the enabled USB3 link states. */ u16 current_mel;/* Used for the debugfs interfaces. */
fs/btrfs/reada.c +5 -0
@@ -745,6 +745,7 @@ static void __reada_start_machine(struct btrfs_fs_info *fs_info)u64 total =0 ;int i; +again: do { enqueued = 0; mutex_lock(&fs_devices->device_list_mutex);
@@ -756,6 +757,10 @@ static void __reada_start_machine(struct btrfs_fs_info *fs_info)mutex_unlock (&fs_devices->device_list_mutex); total += enqueued; }while (enqueued && total <10000 ); +if (fs_devices->seed) { + fs_devices = fs_devices->seed; + goto again; + }if (enqueued ==0 )return ;
fs/cifs/smb2maperror.c +1 -1
@@ -457,7 +457,7 @@ static const struct status_to_posix_error smb2_error_map_table[] = { {STATUS_FILE_INVALID, -EIO, "STATUS_FILE_INVALID"}, {STATUS_ALLOTTED_SPACE_EXCEEDED, -EIO, "STATUS_ALLOTTED_SPACE_EXCEEDED"}, - {STATUS_INSUFFICIENT_RESOURCES, -EREMOTEIO, + {STATUS_INSUFFICIENT_RESOURCES, -EAGAIN, "STATUS_INSUFFICIENT_RESOURCES"}, {STATUS_DFS_EXIT_PATH_FOUND, -EIO, "STATUS_DFS_EXIT_PATH_FOUND"}, {STATUS_DEVICE_DATA_ERROR, -EIO, "STATUS_DEVICE_DATA_ERROR"},
fs/overlayfs/file.c +69 -27
137 lines not on this page · raw message
fs/overlayfs/inode.c +54 -6
75 lines not on this page · raw message
fs/overlayfs/namei.c +8 -0
@@ -18,6 +18,7 @@#include "overlayfs.h" struct ovl_lookup_data { +struct super_block *sb;struct qstr name;bool is_dir;bool opaque;
@@ -244,6 +245,12 @@ static int ovl_lookup_single(struct dentry *base, struct ovl_lookup_data *d,if (!d->metacopy || d->last) goto out; }else { +if (ovl_lookup_trap_inode (d->sb, this)) { +/* Caught in a trap of overlapping layers */ + err = -ELOOP ; + goto out_err; + } +if (last_element) d->is_dir = true;if (d->last)
@@ -819,6 +826,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,int err;bool metacopy = false;struct ovl_lookup_data d = { + .sb = dentry->d_sb, .name = dentry->d_name, .is_dir = false, .opaque = false,
fs/overlayfs/overlayfs.h +3 -0
@@ -270,6 +270,7 @@ void ovl_clear_flag(unsigned long flag, struct inode *inode);bool ovl_test_flag (unsigned long flag,struct inode *inode);bool ovl_inuse_trylock (struct dentry *dentry);void ovl_inuse_unlock (struct dentry *dentry); +bool ovl_is_inuse (struct dentry *dentry);bool ovl_need_index (struct dentry *dentry);int ovl_nlink_start (struct dentry *dentry,bool *locked);void ovl_nlink_end (struct dentry *dentry,bool locked);
@@ -366,6 +367,8 @@ struct ovl_inode_params {struct inode *ovl_new_inode (struct super_block *sb,umode_t mode,dev_t rdev);struct inode *ovl_lookup_inode (struct super_block *sb,struct dentry *real,bool is_upper); +bool ovl_lookup_trap_inode (struct super_block *sb,struct dentry *dir); +struct inode *ovl_get_trap_inode (struct super_block *sb,struct dentry *dir);struct inode *ovl_get_inode (struct super_block *sb,struct ovl_inode_params *oip);static inline void ovl_copyattr (struct inode *from,struct inode *to)
fs/overlayfs/ovl_entry.h +6 -0
@@ -29,6 +29,8 @@ struct ovl_sb {struct ovl_layer {struct vfsmount *mnt; +/* Trap in ovl inode cache */ +struct inode *trap;struct ovl_sb *fs;/* Index of this layer in fs root (upper idx == 0) */ int idx;
@@ -65,6 +67,10 @@ struct ovl_fs {/* Did we take the inuse lock? */ bool upperdir_locked;bool workdir_locked; +/* Traps in ovl inode cache */ +struct inode *upperdir_trap; +struct inode *workdir_trap; +struct inode *indexdir_trap;/* Inode numbers in all layers do not use the high xino_bits */ unsigned int xino_bits; };
fs/overlayfs/super.c +144 -17
296 lines not on this page · raw message
fs/overlayfs/util.c +12 -0
@@ -653,6 +653,18 @@ void ovl_inuse_unlock(struct dentry *dentry) } } +bool ovl_is_inuse (struct dentry *dentry) +{ +struct inode *inode =d_inode (dentry); +bool inuse; + +spin_lock (&inode->i_lock); + inuse = (inode->i_state &I_OVL_INUSE ); +spin_unlock (&inode->i_lock); + +return inuse; +} +/* * Does this overlay dentry need to be indexed on copy up? */
include/linux/mmc/host.h +1 -0
@@ -395,6 +395,7 @@ struct mmc_host { unsigned int retune_now:1; /* do re-tuning at next req */ unsigned int retune_paused:1; /* re-tuning is temporarily disabled */ unsigned int use_blk_mq:1; /* use blk-mq */ + unsigned int retune_crc_disable:1; /* don't trigger retune upon crc */int rescan_disable;/* disable card detection */ int rescan_entered;/* used with nonremovable devices */
include/linux/mmc/sdio_func.h +6 -0
@@ -159,4 +159,10 @@ extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,extern mmc_pm_flag_t sdio_get_host_pm_caps (struct sdio_func *func);extern int sdio_set_host_pm_flags (struct sdio_func *func,mmc_pm_flag_t flags); +extern void sdio_retune_crc_disable (struct sdio_func *func); +extern void sdio_retune_crc_enable (struct sdio_func *func); + +extern void sdio_retune_hold_now (struct sdio_func *func); +extern void sdio_retune_release (struct sdio_func *func); +#endif /* LINUX_MMC_SDIO_FUNC_H */
include/net/bluetooth/hci_core.h +3 -0
@@ -182,6 +182,9 @@ struct adv_info {#define HCI_MAX_SHORT_NAME_LENGTH 10 +/* Min encryption key size to match with SMP */ +#define HCI_MIN_ENC_KEY_SIZE 7 +/* Default LE RPA expiry time, 15 minutes */ #define HCI_DEFAULT_RPA_TIMEOUT (15 * 60)
include/net/cfg80211.h +2 -1
@@ -3448,7 +3448,8 @@ struct cfg80211_ops {* on wiphy_new(), but can be changed by the driver if it has a good * reason to override the default * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station -* on a VLAN interface) +* on a VLAN interface). This flag also serves an extra purpose of +* supporting 4ADDR AP mode on devices which do not support AP/VLAN iftype. * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the * control port protocol ethertype. The device also honours the
kernel/trace/trace.c +1 -5
@@ -8351,12 +8351,8 @@ void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) cnt++; -/* reset all but tr, trace, and overruns */ -memset (&iter.seq,0 , -sizeof (struct trace_iterator ) - - offsetof(struct trace_iterator , seq)); +trace_iterator_reset (&iter); iter.iter_flags |=TRACE_FILE_LAT_FMT ; - iter.pos =-1 ;if (trace_find_next_entry_inc (&iter) !=NULL ) {int ret;
kernel/trace/trace.h +18 -0
@@ -1895,4 +1895,22 @@ static inline void tracer_hardirqs_off(unsigned long a0, unsigned long a1) { }extern struct trace_iterator *tracepoint_print_iter; +/* +* Reset the state of the trace_iterator so that it can read consumed data. +* Normally, the trace_iterator is used for reading the data when it is not +* consumed, and must retain state. +*/ +static __always_inline void trace_iterator_reset(struct trace_iterator *iter) +{ +const size_t offset = offsetof(struct trace_iterator , seq); + +/* +* Keep gcc from complaining about overwriting more than just one +* member in the structure. +*/ +memset ((char *)iter + offset,0 ,sizeof (struct trace_iterator ) - offset); + + iter->pos =-1 ; +} +#endif /* _LINUX_KERNEL_TRACE_H */
kernel/trace/trace_kdb.c +1 -5
@@ -41,12 +41,8 @@ static void ftrace_dump_buf(int skip_lines, long cpu_file)kdb_printf ("Dumping ftrace buffer:\n" ); -/* reset all but tr, trace, and overruns */ -memset (&iter.seq,0 , -sizeof (struct trace_iterator ) - - offsetof(struct trace_iterator , seq)); +trace_iterator_reset (&iter); iter.iter_flags |=TRACE_FILE_LAT_FMT ; - iter.pos =-1 ;if (cpu_file ==RING_BUFFER_ALL_CPUS ) {for_each_tracing_cpu (cpu) {
net/bluetooth/hci_conn.c +9 -1
@@ -1392,8 +1392,16 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,return 0 ; encrypt: -if (test_bit (HCI_CONN_ENCRYPT , &conn->flags)) +if (test_bit (HCI_CONN_ENCRYPT , &conn->flags)) { +/* Ensure that the encryption key size has been read, +* otherwise stall the upper layer responses. +*/ +if (!conn->enc_key_size) +return 0 ; + +/* Nothing else needed, all requirements are met */ return 1 ; + }hci_conn_encrypt (conn);return 0 ;
net/bluetooth/l2cap_core.c +28 -5
@@ -1340,6 +1340,21 @@ static void l2cap_request_info(struct l2cap_conn *conn) sizeof(req), &req); } +static bool l2cap_check_enc_key_size (struct hci_conn *hcon) +{ +/* The minimum encryption key size needs to be enforced by the +* host stack before establishing any L2CAP connections. The +* specification in theory allows a minimum of 1, but to align +* BR/EDR and LE transports, a minimum of 7 is chosen. +* +* This check might also be called for unencrypted connections +* that have no key size requirements. Ensure that the link is +* actually encrypted before enforcing a key size. +*/ +return (!test_bit (HCI_CONN_ENCRYPT , &hcon->flags) || + hcon->enc_key_size >HCI_MIN_ENC_KEY_SIZE ); +} +static void l2cap_do_start (struct l2cap_chan *chan) {struct l2cap_conn *conn = chan->conn;
@@ -1357,9 +1372,14 @@ static void l2cap_do_start(struct l2cap_chan *chan)if (!(conn->info_state &L2CAP_INFO_FEAT_MASK_REQ_DONE ))return ; -if (l2cap_chan_check_security (chan, true) && -__l2cap_no_conn_pending (chan)) +if (!l2cap_chan_check_security (chan, true) || + !__l2cap_no_conn_pending (chan)) +return ; + +if (l2cap_check_enc_key_size (conn->hcon))l2cap_start_connection (chan); +else +__set_chan_timer (chan,L2CAP_DISC_TIMEOUT ); }static inline int l2cap_mode_supported (__u8 mode,__u32 feat_mask)
@@ -1438,7 +1458,10 @@ static void l2cap_conn_start(struct l2cap_conn *conn)continue ; } -l2cap_start_connection (chan); +if (l2cap_check_enc_key_size (conn->hcon)) +l2cap_start_connection (chan); +else +l2cap_chan_close (chan,ECONNREFUSED ); }else if (chan->state ==BT_CONNECT2 ) {struct l2cap_conn_rsp rsp;
@@ -7455,7 +7478,7 @@ static void l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) }if (chan->state ==BT_CONNECT ) { -if (!status) +if (!status &&l2cap_check_enc_key_size (hcon))l2cap_start_connection (chan);else __set_chan_timer (chan,L2CAP_DISC_TIMEOUT );
@@ -7464,7 +7487,7 @@ static void l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)struct l2cap_conn_rsp rsp;__u16 res, stat; -if (!status) { +if (!status &&l2cap_check_enc_key_size (hcon)) {if (test_bit (FLAG_DEFER_SETUP , &chan->flags)) { res =L2CAP_CR_PEND ; stat =L2CAP_CS_AUTHOR_PEND ;
net/can/af_can.c +1 -0
@@ -105,6 +105,7 @@ EXPORT_SYMBOL(can_ioctl);static void can_sock_destruct (struct sock *sk) {skb_queue_purge (&sk->sk_receive_queue); +skb_queue_purge (&sk->sk_error_queue); }static const struct can_proto *can_get_proto (int protocol)
net/mac80211/ieee80211_i.h +3 -0
@@ -2183,6 +2183,9 @@ void ieee80211_tdls_cancel_channel_switch(struct wiphy *wiphy, const u8 *addr);void ieee80211_teardown_tdls_peers (struct ieee80211_sub_if_data *sdata);void ieee80211_tdls_chsw_work (struct work_struct *wk); +void ieee80211_tdls_handle_disconnect (struct ieee80211_sub_if_data *sdata, +const u8 *peer,u16 reason); +const char *ieee80211_get_reason_code_string (u16 reason_code);extern const struct ethtool_ops ieee80211_ethtool_ops;
net/mac80211/mlme.c +11 -1
@@ -2868,7 +2868,7 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,#define case_WLAN (type) \ case WLAN_REASON_##type: return #type -static const char *ieee80211_get_reason_code_string (u16 reason_code) +const char *ieee80211_get_reason_code_string (u16 reason_code) {switch (reason_code) {case_WLAN (UNSPECIFIED );
@@ -2933,6 +2933,11 @@ static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,if (len <24 +2 )return ; +if (!ether_addr_equal (mgmt->bssid, mgmt->sa)) { +ieee80211_tdls_handle_disconnect (sdata, mgmt->sa, reason_code); +return ; + } +if (ifmgd->associated &ðer_addr_equal (mgmt->bssid, ifmgd->associated->bssid)) {const u8 *bssid = ifmgd->associated->bssid;
@@ -2982,6 +2987,11 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, reason_code =le16_to_cpu (mgmt->u.disassoc.reason_code); +if (!ether_addr_equal (mgmt->bssid, mgmt->sa)) { +ieee80211_tdls_handle_disconnect (sdata, mgmt->sa, reason_code); +return ; + } +sdata_info (sdata,"disassociated from %pM (Reason: %u=%s)\n" , mgmt->sa, reason_code,ieee80211_get_reason_code_string (reason_code));
net/mac80211/rx.c +2 -0
@@ -3752,6 +3752,8 @@ static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx)case NL80211_IFTYPE_STATION :if (!bssid && !sdata->u.mgd.use_4addr)return false; +if (ieee80211_is_robust_mgmt_frame (skb) && !rx->sta) +return false;if (multicast)return true;return ether_addr_equal (sdata->vif.addr, hdr->addr1);
net/mac80211/tdls.c +23 -0
@@ -1992,3 +1992,26 @@ void ieee80211_tdls_chsw_work(struct work_struct *wk) }rtnl_unlock (); } + +void ieee80211_tdls_handle_disconnect (struct ieee80211_sub_if_data *sdata, +const u8 *peer,u16 reason) +{ +struct ieee80211_sta *sta; + +rcu_read_lock (); + sta =ieee80211_find_sta (&sdata->vif, peer); +if (!sta || !sta->tdls) { +rcu_read_unlock (); +return ; + } +rcu_read_unlock (); + +tdls_dbg (sdata,"disconnected from TDLS peer %pM (Reason: %u=%s)\n" , + peer, reason, +ieee80211_get_reason_code_string (reason)); + +ieee80211_tdls_oper_request (&sdata->vif, peer, +NL80211_TDLS_TEARDOWN , +WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE , +GFP_ATOMIC ); +}
net/mac80211/util.c +3 -1
@@ -3523,7 +3523,9 @@ int ieee80211_check_combinations(struct ieee80211_sub_if_data *sdata, }/* Always allow software iftypes */ -if (local->hw.wiphy->software_iftypes &BIT (iftype)) { +if (local->hw.wiphy->software_iftypes &BIT (iftype) || + (iftype ==NL80211_IFTYPE_AP_VLAN && + local->hw.wiphy->flags &WIPHY_FLAG_4ADDR_AP )) {if (radar_detect)return -EINVAL ;return 0 ;
net/mac80211/wpa.c +6 -1
@@ -1175,7 +1175,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx)struct ieee80211_rx_status *status =IEEE80211_SKB_RXCB (skb);struct ieee80211_key *key = rx->key;struct ieee80211_mmie_16 *mmie; -u8 aad[GMAC_AAD_LEN ], mic[GMAC_MIC_LEN ], ipn[6 ], nonce[GMAC_NONCE_LEN ]; +u8 aad[GMAC_AAD_LEN ], *mic, ipn[6 ], nonce[GMAC_NONCE_LEN ];struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;if (!ieee80211_is_mgmt (hdr->frame_control))
@@ -1206,13 +1206,18 @@ ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx)memcpy (nonce, hdr->addr2,ETH_ALEN );memcpy (nonce +ETH_ALEN , ipn,6 ); + mic =kmalloc (GMAC_MIC_LEN ,GFP_ATOMIC ); +if (!mic) +return RX_DROP_UNUSABLE ;if (ieee80211_aes_gmac (key->u.aes_gmac.tfm, aad, nonce, skb->data +24 , skb->len -24 , mic) <0 ||crypto_memneq (mic, mmie->mic,sizeof (mmie->mic))) { key->u.aes_gmac.icverrors++; +kfree (mic);return RX_DROP_UNUSABLE ; } +kfree (mic); }memcpy (key->u.aes_gmac.rx_pn, ipn,6 );
net/wireless/core.c +6 -2
@@ -498,7 +498,7 @@ struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv, &rdev->rfkill_ops, rdev);if (!rdev->rfkill) { -kfree (rdev); +wiphy_free (&rdev->wiphy);return NULL ; }
@@ -1335,8 +1335,12 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, }break ;case NETDEV_PRE_UP : -if (!(wdev->wiphy->interface_modes &BIT (wdev->iftype))) +if (!(wdev->wiphy->interface_modes &BIT (wdev->iftype)) && + !(wdev->iftype ==NL80211_IFTYPE_AP_VLAN && + rdev->wiphy.flags &WIPHY_FLAG_4ADDR_AP && + wdev->use_4addr))return notifier_from_errno (-EOPNOTSUPP ); +if (rfkill_blocked (rdev->rfkill))return notifier_from_errno (-ERFKILL );break ;
net/wireless/nl80211.c +9 -3
@@ -3191,8 +3191,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)return -EINVAL ; } -if (!rdev->ops->add_virtual_intf || - !(rdev->wiphy.interface_modes & (1 << type))) +if (!rdev->ops->add_virtual_intf)return -EOPNOTSUPP ; if ((type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN ||
@@ -3211,6 +3210,11 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)return err; } +if (!(rdev->wiphy.interface_modes & (1 << type)) && + !(type ==NL80211_IFTYPE_AP_VLAN && params.use_4addr && + rdev->wiphy.flags &WIPHY_FLAG_4ADDR_AP )) +return -EOPNOTSUPP ; + err =nl80211_parse_mon_options (rdev, type, info, ¶ms);if (err <0 )return err;
@@ -4607,8 +4611,10 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,struct nlattr *sinfoattr, *bss_param; hdr =nl80211hdr_put (msg, portid, seq, flags, cmd); -if (!hdr) +if (!hdr) { +cfg80211_sinfo_release_content (sinfo);return -1 ; + } if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) || nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr) ||
scripts/checkstack.pl +1 -1
@@ -46,7 +46,7 @@ my (@stack, $re, $dre, $x, $xs, $funcre); $x = "[0-9a-f]"; # hex character $xs = "[0-9a-f ]"; # hex character or space $funcre = qr/^$x* <(.*)>:$/; - if ($arch eq 'aarch64') { + if ($arch =~ '^(aarch|arm)64$') { #ffffffc0006325cc: a9bb7bfd stp x29, x30, [sp, #-80]! $re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o; } elsif ($arch eq 'arm') {
security/apparmor/include/policy.h +10 -1
@@ -214,7 +214,16 @@ static inline struct aa_profile *aa_get_newest_profile(struct aa_profile *p)return labels_profile (aa_get_newest_label (&p->label)); } -#define PROFILE_MEDIATES (P ,T ) ((P)->policy.start[(unsigned char) (T)]) +static inline unsigned int PROFILE_MEDIATES (struct aa_profile *profile, +unsigned char class) +{ +if (class <=AA_CLASS_LAST ) +return profile->policy.start[class]; +else +return aa_dfa_match_len (profile->policy.dfa, + profile->policy.start[0 ], &class,1 ); +} +static inline unsigned int PROFILE_MEDIATES_AF (struct aa_profile *profile,u16 AF ) {unsigned int state =PROFILE_MEDIATES (profile,AA_CLASS_NET );
security/apparmor/policy_unpack.c +1 -1
@@ -276,7 +276,7 @@ static bool unpack_nameX(struct aa_ext *e, enum aa_code code, const char *name)char *tag =NULL ;size_t size =unpack_u16_chunk (e, &tag);/* if a name is specified it must match. otherwise skip tag */ -if (name && (!size ||strcmp (name, tag))) +if (name && (!size || tag[size-1 ] !='\0' ||strcmp (name, tag))) goto fail; }else if (name) {/* if a name is specified and there is no name tag fail */
tools/objtool/check.c +32 -6
@@ -839,7 +839,7 @@ static int add_switch_table(struct objtool_file *file, struct instruction *insn,struct symbol *pfunc = insn->func->pfunc;unsigned int prev_offset =0 ; -list_for_each_entry_from (rela, &file->rodata->rela->rela_list, list) { +list_for_each_entry_from (rela, &table->rela_sec->rela_list, list) {if (rela == next_table)break ;
@@ -929,6 +929,7 @@ static struct rela *find_switch_table(struct objtool_file *file, {struct rela *text_rela, *rodata_rela;struct instruction *orig_insn = insn; +struct section *rodata_sec;unsigned long table_offset;/*
@@ -956,10 +957,13 @@ static struct rela *find_switch_table(struct objtool_file *file,/* look for a relocation which references .rodata */ text_rela =find_rela_by_dest_range (insn->sec, insn->offset, insn->len); -if (!text_rela || text_rela->sym != file->rodata->sym) +if (!text_rela || text_rela->sym->type !=STT_SECTION || + !text_rela->sym->sec->rodata)continue ; table_offset = text_rela->addend; + rodata_sec = text_rela->sym->sec; +if (text_rela->type ==R_X86_64_PC32 ) table_offset +=4 ;
@@ -967,10 +971,10 @@ static struct rela *find_switch_table(struct objtool_file *file,* Make sure the .rodata address isn't associated with a * symbol. gcc jump tables are anonymous data. */ -if (find_symbol_containing (file->rodata, table_offset)) +if (find_symbol_containing (rodata_sec, table_offset))continue ; - rodata_rela =find_rela_by_dest (file->rodata, table_offset); + rodata_rela =find_rela_by_dest (rodata_sec, table_offset);if (rodata_rela) {/* * Use of RIP-relative switch jumps is quite rare, and
@@ -1055,7 +1059,7 @@ static int add_switch_table_alts(struct objtool_file *file)struct symbol *func;int ret; -if (!file->rodata || !file->rodata->rela) +if (!file->rodata)return 0 ;for_each_sec (file, sec) {
@@ -1201,10 +1205,33 @@ static int read_retpoline_hints(struct objtool_file *file)return 0 ; } +static void mark_rodata (struct objtool_file *file) +{ +struct section *sec; +bool found = false; + +/* +* This searches for the .rodata section or multiple .rodata.func_name +* sections if -fdata-sections is being used. The .str.1.1 and .str.1.8 +* rodata sections are ignored as they don't contain jump tables. +*/ +for_each_sec (file, sec) { +if (!strncmp (sec->name,".rodata" ,7 ) && + !strstr (sec->name,".str1." )) { + sec->rodata = true; + found = true; + } + } + + file->rodata = found; +} +static int decode_sections (struct objtool_file *file) {int ret; +mark_rodata (file); + ret =decode_instructions (file);if (ret)return ret;
@@ -2176,7 +2203,6 @@ int check(const char *_objname, bool orc)INIT_LIST_HEAD (&file.insn_list);hash_init (file.insn_hash); file.whitelist =find_section_by_name (file.elf,".discard.func_stack_frame_non_standard" ); - file.rodata =find_section_by_name (file.elf,".rodata" ); file.c_file =find_section_by_name (file.elf,".comment" ); file.ignore_unreachables = no_unreachable; file.hints = false;
tools/objtool/check.h +2 -2
@@ -60,8 +60,8 @@ struct objtool_file {struct elf *elf;struct list_head insn_list;DECLARE_HASHTABLE (insn_hash,16 ); -struct section *rodata, *whitelist; -bool ignore_unreachables, c_file, hints; +struct section *whitelist; +bool ignore_unreachables, c_file, hints, rodata; };int check (const char *objname,bool orc);
tools/objtool/elf.c +1 -0
@@ -390,6 +390,7 @@ static int read_relas(struct elf *elf) rela->offset = rela->rela.r_offset; symndx =GELF_R_SYM (rela->rela.r_info); rela->sym =find_symbol_by_index (elf, symndx); + rela->rela_sec = sec;if (!rela->sym) {WARN ("can't find rela entry symbol %d for %s" , symndx, sec->name);
tools/objtool/elf.h +2 -1
@@ -48,7 +48,7 @@ struct section {char *name;int idx;unsigned int len; -bool changed, text; +bool changed, text, rodata; };struct symbol {
@@ -68,6 +68,7 @@ struct rela {struct list_head list;struct hlist_node hash;GElf_Rela rela; +struct section *rela_sec;struct symbol *sym;unsigned int type;unsigned long offset;
tools/testing/selftests/cgroup/test_core.c +6 -1
@@ -198,7 +198,7 @@ static int test_cgcore_no_internal_process_constraint_on_threads(const char *roochar *parent =NULL , *child =NULL ;if (cg_read_strstr (root,"cgroup.controllers" ,"cpu" ) || -cg_read_strstr (root,"cgroup.subtree_control" ,"cpu" )) { +cg_write (root,"cgroup.subtree_control" ,"+cpu" )) { ret =KSFT_SKIP ; goto cleanup; }
@@ -376,6 +376,11 @@ int main(int argc, char *argv[])if (cg_find_unified_root (root,sizeof (root)))ksft_exit_skip ("cgroup v2 isn't mounted\n" ); + +if (cg_read_strstr (root,"cgroup.subtree_control" ,"memory" )) +if (cg_write (root,"cgroup.subtree_control" ,"+memory" )) +ksft_exit_skip ("Failed to set memory controller\n" ); +for (i =0 ; i <ARRAY_SIZE (tests); i++) {switch (tests[i].fn (root)) {case KSFT_PASS :
tools/testing/selftests/cgroup/test_memcontrol.c +4 -0
@@ -1205,6 +1205,10 @@ int main(int argc, char **argv)if (cg_read_strstr (root,"cgroup.controllers" ,"memory" ))ksft_exit_skip ("memory controller isn't available\n" ); +if (cg_read_strstr (root,"cgroup.subtree_control" ,"memory" )) +if (cg_write (root,"cgroup.subtree_control" ,"+memory" )) +ksft_exit_skip ("Failed to set memory controller\n" ); +for (i =0 ; i <ARRAY_SIZE (tests); i++) {switch (tests[i].fn (root)) {case KSFT_PASS :
tools/testing/selftests/vm/Makefile +2 -0
@@ -24,6 +24,8 @@ TEST_GEN_FILES += virtual_address_range TEST_PROGS := run_vmtests +TEST_FILES := test_vmalloc.sh + KSFT_KHDR_INSTALL := 1 include ../lib.mk