x86: edison: Enable SD slot
PATCH 1/1 x86: edison: Enable SD slot
Enable SD slot on Intel Edison platform.
By default firmware doesn't put device on active state. Thus, we have to do this explicitly.
Signed-off-by Andy Shevchenko <[email protected]>
--- arch/x86/dts/edison.dts | 5 ----- board/intel/edison/edison.c | 10 ++++++++++ configs/edison_defconfig | 1 + 3 files changed, 11 insertions(+), 5 deletions(-)
arch/x86/dts/edison.dts +0 -5
@@ -84,15 +84,10 @@ reg = <0xff3fc000 0x1000>; }; -/* - * FIXME: For now U-Boot DM model doesn't allow to power up this controller. - * Enabling it will make U-Boot hang. - * sdcard: mmc at ff3fa000 { compatible = "intel,sdhci-tangier"; reg = <0xff3fa000 0x1000>; }; - */ pmu: power at ff00b000 { compatible = "intel,pmu-mid";
board/intel/edison/edison.c +10 -0
@@ -13,9 +13,19 @@#include <linux/usb/gadget.h> #include <asm/cache.h> +#include <asm/pmu.h> #include <asm/scu.h> #include <asm/u-boot-x86.h> +/* List of Intel Tangier LSSs */ +#define PMU_LSS_TANGIER_SDIO0_01 1 + +int board_early_init_r (void ) +{ +pmu_turn_power (PMU_LSS_TANGIER_SDIO0_01 , true); +return 0 ; +} +static struct dwc3_device dwc3_device_data = { .maximum_speed =USB_SPEED_HIGH , .base =CONFIG_SYS_USB_OTG_BASE ,
configs/edison_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_VENDOR_INTEL=y CONFIG_TARGET_EDISON=y CONFIG_SMP=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y
Signature · 1 line
2.20.1