clk: imx8mm: Fix typo of pwm3 clock's mux option #4
Subsystems (3)
PATCH RESEND 1/2 clk: imx8mm: Fix typo of pwm3 clock's mux option #4
From: Anson Huang <[email protected]>
i.MX8MM has no sys3_pll2_out clock, PWM3 clock's mux option #4 should be sys_pll3_out, sys3_pll2_out is a typo, fix it.
Fixes ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by Anson Huang <[email protected]>
--- drivers/clk/imx/clk-imx8mm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/imx/clk-imx8mm.c +1 -1
@@ -287,7 +287,7 @@ static const char *imx8mm_pwm2_sels[] = {"osc_24m", "sys_pll2_100m", "sys_pll1_1 "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll1_out", };static const char *imx8mm_pwm3_sels[] = {"osc_24m" ,"sys_pll2_100m" ,"sys_pll1_160m" ,"sys_pll1_40m" , -"sys3_pll2_out" ,"clk_ext2" ,"sys_pll1_80m" ,"video_pll1_out" , }; +"sys_pll3_out" ,"clk_ext2" ,"sys_pll1_80m" ,"video_pll1_out" , };static const char *imx8mm_pwm4_sels[] = {"osc_24m" ,"sys_pll2_100m" ,"sys_pll1_160m" ,"sys_pll1_40m" ,"sys_pll3_out" ,"clk_ext2" ,"sys_pll1_80m" ,"video_pll1_out" , };
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH RESEND 2/2 clk: imx8mm: GPT1 clock mux option #5 should be sys_pll1_80m
From: Anson Huang <[email protected]>
i.MX8MM's GPT1 clock mux option #5 should be sys_pll1_80m, NOT sys_pll1_800m, correct it.
Fixes ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by Anson Huang <[email protected]>
--- drivers/clk/imx/clk-imx8mm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/imx/clk-imx8mm.c +1 -1
@@ -293,7 +293,7 @@ static const char *imx8mm_pwm4_sels[] = {"osc_24m", "sys_pll2_100m", "sys_pll1_1 "sys_pll3_out", "clk_ext2", "sys_pll1_80m", "video_pll1_out", };static const char *imx8mm_gpt1_sels[] = {"osc_24m" ,"sys_pll2_100m" ,"sys_pll1_400m" ,"sys_pll1_40m" , -"video_pll1_out" ,"sys_pll1_800m" ,"audio_pll1_out" ,"clk_ext1" }; +"video_pll1_out" ,"sys_pll1_80m" ,"audio_pll1_out" ,"clk_ext1" };static const char *imx8mm_wdog_sels[] = {"osc_24m" ,"sys_pll1_133m" ,"sys_pll1_160m" ,"vpu_pll_out" ,"sys_pll2_125m" ,"sys_pll3_out" ,"sys_pll1_80m" ,"sys_pll2_166m" , };
Signature · 1 line
2.7.4
Shawn Guo
AppliedQuoted 7 lines · On Wed, Jun 26, 2019 at 09:28:02AM +0800, [email protected] wrote:
From: Anson Huang <[email protected]>
i.MX8MM has no
sys3_pll2_outclock, PWM3 clock's mux option #4 should besys_pll3_out,sys3_pll2_outis a typo, fix it.Fixes ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")Signed-off-by Anson Huang <[email protected]>
Applied both, thanks.