dt-bindings: cadence-quadspi: add options reset property
Subsystems (2)
PATCH RESEND v6 1/1 dt-bindings: cadence-quadspi: add options reset property
The QSPI module can have an optional reset signals that will hold the module in a reset state.
Signed-off-by Dinh Nguyen <[email protected]>
---
v6: no change
v5: document reset-names
v4: no change
v3: created base on review comments
v2: did not exist
v1: did not exist
--- Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +5 -0
@@ -35,6 +35,9 @@ custom properties: (qspi_n_ss_out). - cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include either "qspi" and/or "qspi-ocp". Example:
@@ -50,6 +53,8 @@ Example: cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; flash0: n25q00@0 { ...
Signature · 1 line
2.20.0