ARM: dts: nuvoton: Add Nuvoton RunBMC DeviceTree
PATCH 1/6 ARM: dts: nuvoton: Add Nuvoton RunBMC DeviceTree
From: Samuel Jiang <[email protected]>
Initial Nuvoton RunBMC Module which use NPCM750 SoC.
Including features:
1. image partitions
2. lpc and kcs
3. usb
4. serial port
5. spi
6. fiu
7. watchdog
Testeed:
Build Qunata runbmc-nuvoton image and load on RunBMC-nuvoton module
--- arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 292 +++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +292 -0
@@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology [email protected] +// Copyright (c) 2019 Quanta Computer Inc. [email protected] + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 RunBMC Module"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet0 = &emc0; + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + udc0 = &udc0; + udc1 = &udc1; + udc2 = &udc2; + udc3 = &udc3; + udc4 = &udc4; + udc5 = &udc5; + udc6 = &udc6; + udc7 = &udc7; + udc8 = &udc8; + udc9 = &udc9; + emmc0 = &sdhci0; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + gmac0: eth@f0802000 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; + }; + + emc0: eth@f0825000 { + phy-mode = "rmii"; + use-ncsi; + status = "okay"; + }; + + ehci1: usb@f0806000 { + status = "okay"; + }; + + ohci1: ohci@f0807000 { + status = "okay"; + }; + + udc0:udc@f0830000 { + status = "okay"; + }; + + udc1:udc@f0831000 { + status = "okay"; + }; + + udc2:udc@f0832000 { + status = "okay"; + }; + + udc3:udc@f0833000 { + status = "okay"; + }; + + udc4:udc@f0834000 { + status = "okay"; + }; + + udc5:udc@f0835000 { + status = "okay"; + }; + + udc6:udc@f0836000 { + status = "okay"; + }; + + udc7:udc@f0837000 { + status = "okay"; + }; + + udc8:udc@f0838000 { + status = "okay"; + }; + + udc9:udc@f0839000 { + status = "okay"; + }; + + aes:aes@f0858000 { + status = "okay"; + }; + + sha:sha@f085a000 { + status = "okay"; + }; + + fiu0: fiu@fb000000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x4000000>; + }; + u-boot@0 { + label = "u-boot"; + read-only; + reg = <0x0000000 0x80000>; + }; + u-boot-env@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x0800000 0x1500000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + fiu3: fiu@c0000000 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + sdhci0: sdhci@f0842000 { + status = "okay"; + }; + + pcimbox: pcimbox@f0848000 { + status = "okay"; + }; + + vcd: vcd@f0810000 { + status = "okay"; + }; + + ece: ece@f0820000 { + status = "okay"; + }; + + apb { + + watchdog1: watchdog@901C { + status = "okay"; + }; + + rng: rng@b000 { + status = "okay"; + }; + + serial0: serial@1000 { + status = "okay"; + }; + + serial1: serial@2000 { + status = "okay"; + }; + + serial2: serial@3000 { + status = "okay"; + }; + + serial3: serial@4000 { + status = "okay"; + }; + + adc: adc@c000 { + status = "okay"; + }; + + otp:otp@189000 { + status = "okay"; + }; + + lpc_kcs: lpc_kcs@7000 { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; + }; + + lpc_host: lpc_host@7000 { + lpc_bpc: lpc_bpc@40 { + monitor-ports = <0x80>; + status = "okay"; + }; + }; + + spi0: spi@200000 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + spi1: spi@201000 { + status = "okay"; + }; + }; + }; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +};
Signature · 1 line
2.20.1
PATCH 2/6 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: add fan and led functions
From: Samuel Jiang <[email protected]>
Update nuvoton-npcm750-runbmc dts fan and led functions
--- arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 64 ++++++++++++++++++++ 1 file changed, 64 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +64 -0
@@ -269,6 +269,58 @@ }; }; + pwm_fan:pwm-fan-controller@103000 { + pinctrl-names = "default"; + pinctrl-0 = < &pwm0_pins &pwm1_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins + &fanin6_pins &fanin7_pins + &fanin8_pins &fanin9_pins + &fanin10_pins &fanin11_pins>; + status = "okay"; + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@3 { + reg = <0x03>; + fan-tach-ch = /bits/ 8 <0x06 0x07>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@4 { + reg = <0x04>; + fan-tach-ch = /bits/ 8 <0x08 0x09>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@5 { + reg = <0x05>; + fan-tach-ch = /bits/ 8 <0x0A 0x0B>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@6 { + reg = <0x06>; + fan-tach-ch = /bits/ 8 <0x0C 0x0D>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@7 { + reg = <0x07>; + fan-tach-ch = /bits/ 8 <0x0E 0x0F>; + cooling-levels = /bits/ 8 <127 255>; + }; + }; + spi0: spi@200000 { cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; status = "okay";
@@ -279,6 +331,18 @@ }; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio3 13 GPIO_ACTIVE_LOW>; + + led { + label = "led-green-arm"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; }; &gcr {
Signature · 1 line
2.20.1
PATCH 3/6 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: Add i2c nodes
In reply to Samuel JiangFrom: Samuel Jiang <[email protected]>
update nuvoton-npcm750-runbmc dts i2c nodes which includeing:
1. ADC
2. EEPROM
3. i2c-switch
4. temperature sensor
5. ADM
--- arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 232 +++++++++++++++++++ 1 file changed, 232 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +232 -0
@@ -27,6 +27,20 @@ udc8 = &udc8; udc9 = &udc9; emmc0 = &sdhci0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; spi0 = &spi0; spi1 = &spi1; fiu0 = &fiu0;
@@ -269,6 +283,224 @@ }; }; + i2c0: i2c@80000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@81000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c_slot1a: i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_slot1b: i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_slot2a: i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_slot2b: i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c_slot3: i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c_slot4: i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c_slot5: i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c_m2_s1: i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_m2_s2: i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c_m2_s3: i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_m2_s4: i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + i2c2: i2c@82000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + }; + + i2c3: i2c@83000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c4: i2c@84000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + }; + + i2c5: i2c@85000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c6: i2c@86000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c7: i2c@87000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + adc128d818@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = <1>; + }; + }; + + i2c8: i2c@88000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + adm1278@11 { + compatible = "adm1278"; + reg = <0x11>; + Rsense = <500>; + }; + + adm1278@12 { + compatible = "adm1278"; + reg = <0x12>; + Rsense = <500>; + }; + }; + + i2c9: i2c@89000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c10: i2c@8a000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c11: i2c@8b000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c12: i2c@8c000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + }; + + i2c13: i2c@8d000 { + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <100000>; + status = "okay"; + tmp75@4a { + compatible = "ti,tmp75"; + reg = <0x4a>; + status = "okay"; + }; + m24128_fru@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <64>; + status = "okay"; + }; + }; + pwm_fan:pwm-fan-controller@103000 { pinctrl-names = "default"; pinctrl-0 = < &pwm0_pins &pwm1_pins
Signature · 1 line
2.20.1
PATCH 4/6 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: Add i2c IOExpand nodes
In reply to Samuel JiangFrom: Samuel Jiang <[email protected]>
update nuvoton-npcm750-runbmc i2c nodes which define gpios outside RunBMC module
--- arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 404 +++++++++++++++++++ 1 file changed, 404 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +404 -0
@@ -577,6 +577,410 @@ }; }; +/* external io expander */ + +&i2c10 { + gpio: pca9555@4e { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c11 { + pca9539_g1a: pca9539-g1a@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + G1A_P0_0 { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "TPM_BMC_ALERT_N"; + }; + G1A_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "FM_BIOS_TOP_SWAP"; + }; + G1A_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "FM_BIOS_PREFRB2_GOOD"; + }; + G1A_P0_3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "BMC_SATAXPCIE_0TO3_SEL"; + }; + G1A_P0_4 { + gpio-hog; + gpios = <4 0>; + input; + line-name = "BMC_SATAXPCIE_4TO7_SEL"; + }; + G1A_P0_5 { + gpio-hog; + gpios = <5 0>; + output-low; + line-name = "FM_UV_ADR_TRIGGER_EN_N"; + }; + G1A_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "RM_THROTTLE_EN_N"; + }; + G1A_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_BMC_TPM_PRES_N"; + }; + G1A_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_CPU0_SKTOCC_LVT3_N"; + }; + G1A_P1_2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "FM_CPU1_SKTOCC_LVT3_N"; + }; + G1A_P1_3 { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PSU1_ALERT_N"; + }; + G1A_P1_4 { + gpio-hog; + gpios = <12 0>; + input; + line-name = "PSU2_ALERT_N"; + }; + G1A_P1_5 { + gpio-hog; + gpios = <13 0>; + input; + line-name = "H_CPU0_FAST_WAKE_LVT3_N"; + }; + G1A_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "I2C_MUX1_RESET_N"; + }; + G1A_P1_7 { + gpio-hog; + gpios = <15 0>; + input; + line-name = "FM_CPU_CATERR_LVT3_N"; + }; + }; + pca9539_g1b: pca9539-g1b@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + G1B_P0_0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "PVDDQ_ABC_PINALERT_N"; + }; + G1B_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "PVDDQ_DEF_PINALERT_N"; + }; + G1B_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "PVDDQ_GHJ_PINALERT_N"; + }; + G1B_P0_3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "PVDDQ_KLM_PINALERT_N"; + }; + G1B_P0_5 { + gpio-hog; + gpios = <5 0>; + input; + line-name = "FM_BOARD_REV_ID0"; + }; + G1B_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "FM_BOARD_REV_ID1"; + }; + G1B_P0_7 { + gpio-hog; + gpios = <7 0>; + input; + line-name = "FM_BOARD_REV_ID2"; + }; + G1B_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_OC_DETECT_EN_N"; + }; + G1B_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_FLASH_DESC_OVERRIDE"; + }; + G1B_P1_2 { + gpio-hog; + gpios = <10 0>; + output-low; + line-name = "FP_PWR_ID_LED_N"; + }; + G1B_P1_3 { + gpio-hog; + gpios = <11 0>; + output-low; + line-name = "BMC_LED_PWR_GRN"; + }; + G1B_P1_4 { + gpio-hog; + gpios = <12 0>; + output-low; + line-name = "BMC_LED_PWR_AMBER"; + }; + G1B_P1_5 { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "FM_BMC_FAULT_LED_N"; + }; + G1B_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "FM_CPLD_BMC_PWRDN_N"; + }; + G1B_P1_7 { + gpio-hog; + gpios = <15 0>; + output-high; + line-name = "BMC_LED_CATERR_N"; + }; + }; +}; + +&i2c12 { + pca9539_g2a: pca9539-g2a@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + G2A_P0_0 { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "BMC_PON_RST_REQ_N"; + }; + G2A_P0_1 { + gpio-hog; + gpios = <1 0>; + output-high; + line-name = "BMC_RST_IND_REQ_N"; + }; + G2A_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "RST_BMC_RTCRST"; + }; + G2A_P0_3 { + gpio-hog; + gpios = <3 0>; + output-high; + line-name = "FM_BMC_PWRBTN_OUT_N"; + }; + G2A_P0_4 { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "RST_BMC_SYSRST_BTN_OUT_N"; + }; + G2A_P0_5 { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "FM_BATTERY_SENSE_EN_N"; + }; + G2A_P0_6 { + gpio-hog; + gpios = <6 0>; + output-high; + line-name = "FM_BMC_READY_N"; + }; + G2A_P0_7 { + gpio-hog; + gpios = <7 0>; + input; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + G2A_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_SLOT4_CFG0"; + }; + G2A_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_SLOT4_CFG1"; + }; + G2A_P1_2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "FM_NVDIMM_EVENT_N"; + }; + G2A_P1_3 { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PSU1_BLADE_EN_N"; + }; + G2A_P1_4 { + gpio-hog; + gpios = <12 0>; + input; + line-name = "BMC_PCH_FNM"; + }; + G2A_P1_5 { + gpio-hog; + gpios = <13 0>; + input; + line-name = "FM_SOL_UART_CH_SEL"; + }; + G2A_P1_6 { + gpio-hog; + gpios = <14 0>; + input; + line-name = "FM_BIOS_POST_CMPLT_N"; + }; + }; + + pca9539_g2b: pca9539-g2b@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + G2B_P0_0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "FM_CPU_MSMI_LVT3_N"; + }; + G2B_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS"; + }; + G2B_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "FM_CPU1_DISABLE_BMC_N"; + }; + G2B_P0_3 { + gpio-hog; + gpios = <3 0>; + output-low; + line-name = "BMC_JTAG_SELECT"; + }; + G2B_P0_4 { + gpio-hog; + gpios = <4 0>; + output-low; + line-name = "PECI_MUX_SELECT"; + }; + G2B_P0_5 { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "I2C_MUX2_RESET_N"; + }; + G2B_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "FM_BMC_CPLD_PSU2_ON"; + }; + G2B_P0_7 { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "PSU2_ALERT_EN_N"; + }; + G2B_P1_0 { + gpio-hog; + gpios = <8 0>; + output-high; + line-name = "FM_CPU_BMC_INIT"; + }; + G2B_P1_1 { + gpio-hog; + gpios = <9 0>; + output-high; + line-name = "IRQ_BMC_PCH_SCI_LPC_N"; + }; + G2B_P1_2 { + gpio-hog; + gpios = <10 0>; + output-low; + line-name = "PMB_ALERT_EN_N"; + }; + G2B_P1_3 { + gpio-hog; + gpios = <11 0>; + output-high; + line-name = "FM_FAST_PROCHOT_EN_N"; + }; + G2B_P1_4 { + gpio-hog; + gpios = <12 0>; + output-high; + line-name = "BMC_NVDIMM_PRSNT_N"; + }; + G2B_P1_5 { + gpio-hog; + gpios = <13 0>; + output-low; + line-name = "FM_BACKUP_BIOS_SEL_H_BMC"; + }; + G2B_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "FM_PWRBRK_N"; + }; + }; +}; + &gcr { serial_port_mux: mux-controller { compatible = "mmio-mux";
Signature · 1 line
2.20.1
PATCH 5/6 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: gpios which inside module
In reply to Samuel JiangFrom: Samuel Jiang <[email protected]>
add nuvoton-npcm750-runbmc-gpio-dtsi which include runbmc gpios update nuvoton-npcm750-runbmc gpios which execute inside module
--- .../boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi | 157 ++++++++++++++++++ arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 37 +++++ 2 files changed, 194 insertions(+) create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi
arch/arm/boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi new file +157 -0
@@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Quanta Computer Inc. [email protected] + +/ { + pinctrl: pinctrl@f0800000 { + gpio0ol_pins: gpio0ol-pins { + pins = "GPIO0/IOX1DI"; + bias-disable; + output-low; + }; + gpio1ol_pins: gpio1ol-pins { + pins = "GPIO1/IOX1LD"; + bias-disable; + output-low; + }; + gpio2ol_pins: gpio2ol-pins { + pins = "GPIO2/IOX1CK"; + bias-disable; + output-low; + }; + gpio3ol_pins: gpio3ol-pins { + pins = "GPIO3/IOX1D0"; + bias-disable; + output-low; + }; + gpio8o_pins: gpio8o-pins { + pins = "GPIO8/LKGPO1"; + bias-disable; + output-high; + }; + gpio9ol_pins: gpio9ol-pins { + pins = "GPIO9/LKGPO2"; + bias-disable; + output-low; + }; + gpio12ol_pins: gpio12ol-pins { + pins = "GPIO12/GSPICK/SMB5BSCL"; + bias-disable; + output-low; + }; + gpio13ol_pins: gpio13ol-pins { + pins = "GPIO13/GSPIDO/SMB5BSDA"; + bias-disable; + output-low; + }; + gpio14ol_pins: gpio14ol-pins { + pins = "GPIO14/GSPIDI/SMB5CSCL"; + bias-disable; + output-low; + }; + gpio15ol_pins: gpio15ol-pins { + pins = "GPIO15/GSPICS/SMB5CSDA"; + bias-disable; + output-low; + }; + gpio37ol_pins: gpio37ol-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + output-low; + }; + gpio38_pins: gpio38-pins { + pins = "GPIO38/SMB3CSCL"; + bias-disable; + input-enable; + }; + gpio39_pins: gpio39-pins { + pins = "GPIO39/SMB3BSDA"; + bias-disable; + input-enable; + }; + gpio94ol_pins: gpio94ol-pins { + pins = "GPIO94/nKBRST/SMB5DSDA"; + bias-disable; + output-low; + }; + gpio108ol_pins: gpio108ol-pins { + pins = "GPIO108/RG1MDC"; + bias-disable; + output-low; + }; + gpio109ol_pins: gpio109ol-pins { + pins = "GPIO109/RG1MDIO"; + bias-disable; + output-low; + }; + gpio110ol_pins: gpio110ol-pins { + pins = "GPIO110/RG2TXD0/DDRV0"; + bias-disable; + output-low; + }; + gpio111ol_pins: gpio111ol-pins { + pins = "GPIO111/RG2TXD1/DDRV1"; + bias-disable; + output-low; + }; + gpio112ol_pins: gpio112ol-pins { + pins = "GPIO112/RG2TXD2/DDRV2"; + bias-disable; + output-low; + }; + gpio113ol_pins: gpio113ol-pins { + pins = "GPIO113/RG2TXD3/DDRV3"; + bias-disable; + output-low; + }; + gpio208_pins: gpio208-pins { + pins = "GPIO208/RG2TXC/DVCK"; + bias-disable; + input-enable; + }; + gpio209ol_pins: gpio209ol-pins { + pins = "GPIO209/RG2TXCTL/DDRV4"; + bias-disable; + output-low; + }; + gpio210ol_pins: gpio210ol-pins { + pins = "GPIO210/RG2RXD0/DDRV5"; + bias-disable; + output-low; + }; + gpio211ol_pins: gpio211ol-pins { + pins = "GPIO211/RG2RXD1/DDRV6"; + bias-disable; + output-low; + }; + gpio212ol_pins: gpio212ol-pins { + pins = "GPIO212/RG2RXD2/DDRV7"; + bias-disable; + output-low; + }; + gpio213ol_pins: gpio213ol-pins { + pins = "GPIO213/RG2RXD3/DDRV8"; + bias-disable; + output-low; + }; + gpio214ol_pins: gpio214ol-pins { + pins = "GPIO214/RG2RXC/DDRV9"; + bias-disable; + output-low; + }; + gpio215ol_pins: gpio215ol-pins { + pins = "GPIO215/RG2RXCTL/DDRV10"; + bias-disable; + output-low; + }; + gpio216ol_pins: gpio216ol-pins { + pins = "GPIO216/RG2MDC/DDRV11"; + bias-disable; + output-low; + }; + gpio217ol_pins: gpio217ol-pins { + pins = "GPIO217/RG2MDIO/DVHSYNC"; + bias-disable; + output-low; + }; + }; +};
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +37 -0
@@ -4,6 +4,7 @@ /dts-v1/; #include "nuvoton-npcm750.dtsi" +#include "nuvoton-npcm750-runbmc-gpio.dtsi" / { model = "Nuvoton npcm750 RunBMC Module";
@@ -564,6 +565,42 @@ }; }; + pinctrl: pinctrl@f0800000 { + pinctrl-names = "default"; + pinctrl-0 = < + /******* RunBMC inside Module pins *******/ + &gpio0ol_pins + &gpio1ol_pins + &gpio2ol_pins + &gpio3ol_pins + &gpio8o_pins + &gpio9ol_pins + &gpio12ol_pins + &gpio13ol_pins + &gpio14ol_pins + &gpio15ol_pins + &gpio37ol_pins + &gpio38_pins + &gpio39_pins + &gpio94ol_pins + &gpio108ol_pins + &gpio109ol_pins + &gpio111ol_pins + &gpio112ol_pins + &gpio113ol_pins + &gpio208_pins + &gpio209ol_pins + &gpio210ol_pins + &gpio211ol_pins + &gpio212ol_pins + &gpio213ol_pins + &gpio214ol_pins + &gpio215ol_pins + &gpio216ol_pins + &gpio217ol_pins + >; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";
Signature · 1 line
2.20.1
PATCH 6/6 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: define gpios outside Module
In reply to Samuel JiangFrom: Samuel Jiang <[email protected]>
update nuvoton-npcm750-runbmc and runbmc-gpio-dtsi gpios which outside runbmc module
--- .../boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi | 360 ++++++++++++++++++ arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 76 ++++ 2 files changed, 436 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi +360 -0
@@ -23,6 +23,21 @@ bias-disable; output-low; }; + gpio5_pins: gpio5-pins { + pins = "GPIO5/IOX2LD/SMB1DSCL"; + bias-disable; + input-enable; + }; + gpio6_pins: gpio6-pins { + pins = "GPIO6/IOX2CK/SMB2DSDA"; + bias-disable; + input-enable; + }; + gpio7_pins: gpio7-pins { + pins = "GPIO7/IOX2D0/SMB2DSCL"; + bias-disable; + input-enable; + }; gpio8o_pins: gpio8o-pins { pins = "GPIO8/LKGPO1"; bias-disable;
@@ -33,6 +48,16 @@ bias-disable; output-low; }; + gpio10_pins: gpio10-pins { + pins = "GPIO10/IOXHLD"; + bias-disable; + input-enable; + }; + gpio11_pins: gpio11-pins { + pins = "GPIO11/IOXHCK"; + bias-disable; + input-enable; + }; gpio12ol_pins: gpio12ol-pins { pins = "GPIO12/GSPICK/SMB5BSCL"; bias-disable;
@@ -53,6 +78,46 @@ bias-disable; output-low; }; + gpio20_pins: gpio20-pins { + pins = "GPIO20/SMB4CSDA/SMB15SDA"; + bias-disable; + input-enable; + }; + gpio21_pins: gpio21-pins { + pins = "GPIO21/SMB4CSCL/SMB15SCL"; + bias-disable; + input-enable; + }; + gpio22o_pins: gpio22o-pins { + pins = "GPIO22/SMB4DSDA/SMB14SDA"; + bias-disable; + output-high; + }; + gpio23_pins: gpio23-pins { + pins = "GPIO23/SMB4DSCL/SMB14SCL"; + bias-disable; + input-enable; + }; + gpio24_pins: gpio24-pins { + pins = "GPIO24/IOXHDO"; + bias-disable; + input-enable; + }; + gpio25_pins: gpio25-pins { + pins = "GPIO25/IOXHDI"; + bias-disable; + input-enable; + }; + gpio30_pins: gpio27-pins { + pins = "GPIO30/SMB3SDA"; + bias-disable; + input-enable; + }; + gpio31_pins: gpio27-pins { + pins = "GPIO31/SMB3SCL"; + bias-disable; + input-enable; + }; gpio37ol_pins: gpio37ol-pins { pins = "GPIO37/SMB3CSDA"; bias-disable;
@@ -68,6 +133,86 @@ bias-disable; input-enable; }; + gpio40o_pins: gpio40o-pins { + pins = "GPIO40/SMB3BSCL"; + bias-disable; + output-high; + }; + gpio59_pins: gpio59-pins { + pins = "GPIO59/SMB3DSDA"; + bias-disable; + input-enable; + }; + gpio76_pins: gpio76-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + input-enable; + }; + gpio77_pins: gpio77-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + input-enable; + }; + gpio78o_pins: gpio78o-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + output-high; + }; + gpio79_pins: gpio79-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + input-enable; + }; + gpio82_pins: gpio82-pins { + pins = "GPIO82/PWM2"; + bias-disable; + input-enable; + }; + gpio83_pins: gpio83-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio84_pins: gpio84-pins { + pins = "GPIO84/R2TXD0"; + bias-disable; + input-enable; + }; + gpio85o_pins: gpio85o-pins { + pins = "GPIO85/R2TXD1"; + bias-disable; + output-high; + }; + gpio86ol_pins: gpio86ol-pins { + pins = "GPIO86/R2TXEN"; + bias-disable; + output-low; + }; + gpio87_pins: gpio87-pins { + pins = "GPIO87/R2RXD0"; + bias-disable; + input-enable; + }; + gpio88_pins: gpio88-pins { + pins = "GPIO88/R2RXD1"; + bias-disable; + input-enable; + }; + gpio89_pins: gpio89-pins { + pins = "GPIO89/R2CRSDV"; + bias-disable; + input-enable; + }; + gpio90_pins: gpio90-pins { + pins = "GPIO90/R2RXERR"; + bias-disable; + input-enable; + }; + gpio93_pins: gpio93-pins { + pins = "GPIO93/GA20/SMB5DSCL"; + bias-disable; + input-enable; + }; gpio94ol_pins: gpio94ol-pins { pins = "GPIO94/nKBRST/SMB5DSDA"; bias-disable;
@@ -103,6 +248,181 @@ bias-disable; output-low; }; + gpio114o_pins: gpio114o-pins { + pins = "GPIO114/SMB0SCL"; + bias-disable; + output-high; + }; + gpio115_pins: gpio115-pins { + pins = "GPIO115/SMB0SDA"; + bias-disable; + input-enable; + }; + gpio120_pins: gpio120-pins { + pins = "GPIO120/SMB2CSDA"; + bias-disable; + input-enable; + }; + gpio121_pins: gpio121-pins { + pins = "GPIO121/SMB2CSCL"; + bias-disable; + input-enable; + }; + gpio122_pins: gpio122-pins { + pins = "GPIO122/SMB2BSDA"; + bias-disable; + input-enable; + }; + gpio123_pins: gpio123-pins { + pins = "GPIO123/SMB2BSCL"; + bias-disable; + input-enable; + }; + gpio124_pins: gpio124-pins { + pins = "GPIO124/SMB1CSDA"; + bias-disable; + input-enable; + }; + gpio125_pins: gpio125-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + input-enable; + }; + gpio126_pins: gpio126-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + input-enable; + }; + gpio127o_pins: gpio127o-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + output-high; + }; + gpio136_pins: gpio136-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137_pins: gpio137-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + input-enable; + }; + gpio138_pins: gpio138-pins { + pins = "GPIO138/SD1DT2"; + bias-disable; + input-enable; + }; + gpio139_pins: gpio139-pins { + pins = "GPIO139/SD1DT3"; + bias-disable; + input-enable; + }; + gpio140_pins: gpio140-pins { + pins = "GPIO140/SD1CLK"; + bias-disable; + input-enable; + }; + gpio141_pins: gpio141-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio142_pins: gpio142-pins { + pins = "GPIO142/SD1CMD"; + bias-disable; + input-enable; + }; + gpio143_pins: gpio143-pins { + pins = "GPIO143/SD1CD/SD1PWR"; + bias-disable; + input-enable; + }; + gpio144_pins: gpio144-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145_pins: gpio145-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146_pins: gpio146-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147_pins: gpio147-pins { + pins = "GPIO147/PWM7"; + bias-disable; + input-enable; + }; + gpio153o_pins: gpio153o-pins { + pins = "GPIO153/MMCWP"; + bias-disable; + output-high; + }; + gpio155_pins: gpio155-pins { + pins = "GPIO155/nMMCCD/nMMCRST"; + bias-disable; + input-enable; + }; + gpio160o_pins: gpio160o-pins { + pins = "GPIO160/CLKOUT/RNGOSCOUT"; + bias-disable; + output-high; + }; + gpio169o_pins: gpio169o-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + output-high; + }; + gpio188o_pins: gpio188o-pins { + pins = "GPIO188/SPI3D2/nSPI3CS2"; + bias-disable; + output-high; + }; + gpio189_pins: gpio189-pins { + pins = "GPIO189/SPI3D3/nSPI3CS3"; + bias-disable; + input-enable; + }; + gpio196_pins: gpio196-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + input-enable; + }; + gpio197_pins: gpio197-pins { + pins = "GPIO197/SMB0DEN"; + bias-disable; + input-enable; + }; + gpio198o_pins: gpio198o-pins { + pins = "GPIO198/SMB0DSDA"; + bias-disable; + output-high; + }; + gpio199o_pins: gpio199o-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + output-high; + }; + gpio200_pins: gpio200-pins { + pins = "GPIO200/R2CK"; + input-enable; + bias-disable; + }; + gpio202_pins: gpio202-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + input-enable; + }; + gpio203o_pins: gpio203o-pins { + pins = "GPIO203/FANIN16"; + bias-disable; + output-high; + }; gpio208_pins: gpio208-pins { pins = "GPIO208/RG2TXC/DVCK"; bias-disable;
@@ -153,5 +473,45 @@ bias-disable; output-low; }; + gpio224_pins: gpio224-pins { + pins = "GPIO224/SPIXCK"; + bias-disable; + input-enable; + }; + gpio225ol_pins: gpio225ol-pins { + pins = "GPO225/SPIXD0/STRAP12"; + bias-disable; + output-low; + }; + gpio226ol_pins: gpio226ol-pins { + pins = "GPO226/SPIXD1/STRAP13"; + bias-disable; + output-low; + }; + gpio227ol_pins: gpio227ol-pins { + pins = "GPIO227/nSPIXCS0"; + bias-disable; + output-low; + }; + gpio228o_pins: gpio228ol-pins { + pins = "GPIO228/nSPIXCS1"; + bias-disable; + output-high; + }; + gpio229o_pins: gpio229o-pins { + pins = "GPO229/SPIXD2/STRAP3"; + bias-disable; + output-high; + }; + gpio230_pins: gpio230-pins { + pins = "GPIO230/SPIXD3"; + bias-disable; + input-enable; + }; + gpio231o_pins: gpio231o-pins { + pins = "GPIO231/nCLKREQ"; + bias-disable; + output-high; + }; }; };
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +76 -0
82 lines not on this page · raw message
Signature · 1 line
2.20.1
Hi Samuel,
Quoted 5 lines · Samuel Jiang
From: Samuel Jiang <[email protected]>
Initial Nuvoton RunBMC Module which use NPCM750 SoC.
Quoted 8 lines
Including features:
1. image partitions
2. lpc and kcs
3. usb
4. serial port
5. spi
6. fiu
7. watchdog
Do you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Please test against 5.2.
Once these patches have had review we can include them in the openbmc tree.
Cheers,
Joel
Quoted 311 lines
Testeed:
Build Qunata runbmc-nuvoton image and load on RunBMC-nuvoton moduleSigned-off-by Samuel Jiang <[email protected]>--- arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 292 +++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dtsarch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +292
-1@@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology [email protected] +// Copyright (c) 2019 Quanta Computer Inc. [email protected] + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 RunBMC Module"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet0 = &emc0; + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + udc0 = &udc0; + udc1 = &udc1; + udc2 = &udc2; + udc3 = &udc3; + udc4 = &udc4; + udc5 = &udc5; + udc6 = &udc6; + udc7 = &udc7; + udc8 = &udc8; + udc9 = &udc9; + emmc0 = &sdhci0; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + gmac0: eth@f0802000 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; + }; + + emc0: eth@f0825000 { + phy-mode = "rmii"; + use-ncsi; + status = "okay"; + }; + + ehci1: usb@f0806000 { + status = "okay"; + }; + + ohci1: ohci@f0807000 { + status = "okay"; + }; + + udc0:udc@f0830000 { + status = "okay"; + }; + + udc1:udc@f0831000 { + status = "okay"; + }; + + udc2:udc@f0832000 { + status = "okay"; + }; + + udc3:udc@f0833000 { + status = "okay"; + }; + + udc4:udc@f0834000 { + status = "okay"; + }; + + udc5:udc@f0835000 { + status = "okay"; + }; + + udc6:udc@f0836000 { + status = "okay"; + }; + + udc7:udc@f0837000 { + status = "okay"; + }; + + udc8:udc@f0838000 { + status = "okay"; + }; + + udc9:udc@f0839000 { + status = "okay"; + }; + + aes:aes@f0858000 { + status = "okay"; + }; + + sha:sha@f085a000 { + status = "okay"; + }; + + fiu0: fiu@fb000000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x4000000>; + }; + u-boot@0 { + label = "u-boot"; + read-only; + reg = <0x0000000 0x80000>; + }; + u-boot-env@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x0800000 0x1500000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + fiu3: fiu@c0000000 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + sdhci0: sdhci@f0842000 { + status = "okay"; + }; + + pcimbox: pcimbox@f0848000 { + status = "okay"; + }; + + vcd: vcd@f0810000 { + status = "okay"; + }; + + ece: ece@f0820000 { + status = "okay"; + }; + + apb { + + watchdog1: watchdog@901C { + status = "okay"; + }; + + rng: rng@b000 { + status = "okay"; + }; + + serial0: serial@1000 { + status = "okay"; + }; + + serial1: serial@2000 { + status = "okay"; + }; + + serial2: serial@3000 { + status = "okay"; + }; + + serial3: serial@4000 { + status = "okay"; + }; + + adc: adc@c000 { + status = "okay"; + }; + + otp:otp@189000 { + status = "okay"; + }; + + lpc_kcs: lpc_kcs@7000 { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; + }; + + lpc_host: lpc_host@7000 { + lpc_bpc: lpc_bpc@40 { + monitor-ports = <0x80>; + status = "okay"; + }; + }; + + spi0: spi@200000 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + spi1: spi@201000 { + status = "okay"; + }; + }; + }; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +}; --2.20.1
Hi Joel,
Do you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
No, the patches still could not submit to the mainline kernel. We need Nuvoton teams help fill up the related source code in the mainline.
When you do that, you don't need the "dev-5.17" part in your patch
subjects. You also can include the "tested" information in the cover
letter, but not in the patches themselves.
Based on the above reason, I prefer to keep “dev-5.17” part first and will update 1/6 patches information. After Nuvoton team members back, I will discuss with them the mainline situation.
Thanks,
Samuel Jiang
On Jul 1, 2019, 2:57 PM +0800, Joel Stanley <[email protected]>, wrote:
Hi Samuel,
On Mon, 1 Jul 2019 at 06:02, Samuel Jiang <[email protected]> wrote:
From: Samuel Jiang <[email protected]>
Initial Nuvoton RunBMC Module which use NPCM750 SoC.
Including features:
1. image partitions
2. lpc and kcs
3. usb
4. serial port
5. spi
6. fiu
7. watchdog
Do you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Please test against 5.2.
Once these patches have had review we can include them in the openbmc tree.
Cheers,
Joel
Testeed:
Build Qunata runbmc-nuvoton image and load on RunBMC-nuvoton module
---arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 292 +++++++++++++++++++
1 file changed, 292 insertions(+)
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +292 -0
@@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology [email protected] +// Copyright (c) 2019 Quanta Computer Inc. [email protected] + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 RunBMC Module"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet0 = &emc0; + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + udc0 = &udc0; + udc1 = &udc1; + udc2 = &udc2; + udc3 = &udc3; + udc4 = &udc4; + udc5 = &udc5; + udc6 = &udc6; + udc7 = &udc7; + udc8 = &udc8; + udc9 = &udc9; + emmc0 = &sdhci0; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + gmac0: eth@f0802000 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; + }; + + emc0: eth@f0825000 { + phy-mode = "rmii"; + use-ncsi; + status = "okay"; + }; + + ehci1: usb@f0806000 { + status = "okay"; + }; + + ohci1: ohci@f0807000 { + status = "okay"; + }; + + udc0:udc@f0830000 { + status = "okay"; + }; + + udc1:udc@f0831000 { + status = "okay"; + }; + + udc2:udc@f0832000 { + status = "okay"; + }; + + udc3:udc@f0833000 { + status = "okay"; + }; + + udc4:udc@f0834000 { + status = "okay"; + }; + + udc5:udc@f0835000 { + status = "okay"; + }; + + udc6:udc@f0836000 { + status = "okay"; + }; + + udc7:udc@f0837000 { + status = "okay"; + }; + + udc8:udc@f0838000 { + status = "okay"; + }; + + udc9:udc@f0839000 { + status = "okay"; + }; + + aes:aes@f0858000 { + status = "okay"; + }; + + sha:sha@f085a000 { + status = "okay"; + }; + + fiu0: fiu@fb000000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x4000000>; + }; + u-boot@0 { + label = "u-boot"; + read-only; + reg = <0x0000000 0x80000>; + }; + u-boot-env@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x0800000 0x1500000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + fiu3: fiu@c0000000 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + sdhci0: sdhci@f0842000 { + status = "okay"; + }; + + pcimbox: pcimbox@f0848000 { + status = "okay"; + }; + + vcd: vcd@f0810000 { + status = "okay"; + }; + + ece: ece@f0820000 { + status = "okay"; + }; + + apb { + + watchdog1: watchdog@901C { + status = "okay"; + }; + + rng: rng@b000 { + status = "okay"; + }; + + serial0: serial@1000 { + status = "okay"; + }; + + serial1: serial@2000 { + status = "okay"; + }; + + serial2: serial@3000 { + status = "okay"; + }; + + serial3: serial@4000 { + status = "okay"; + }; + + adc: adc@c000 { + status = "okay"; + }; + + otp:otp@189000 { + status = "okay"; + }; + + lpc_kcs: lpc_kcs@7000 { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; + }; + + lpc_host: lpc_host@7000 { + lpc_bpc: lpc_bpc@40 { + monitor-ports = <0x80>; + status = "okay"; + }; + }; + + spi0: spi@200000 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + spi1: spi@201000 { + status = "okay"; + }; + }; + }; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +};
--
2.20.1
Quoted 7 lines · Samuel Jiang (江騏先)
Hi Joel,
Do you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
No, the patches still could not submit to the mainline kernel. We need Nuvoton teams help fill up the related source code in the mainline.
Why can't you submit them?
Patches are held in the openbmc tree only if they are on their way to be included in an upstream release.
Quoted 6 lines
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Based on the above reason, I prefer to keep “dev-5.17” part first and will update 1/6 patches information.
Do you mean 5.1?
Quoted 352 lines
After Nuvoton team members back, I will discuss with them the mainline situation.
Thanks,
Samuel Jiang
On Jul 1, 2019, 2:57 PM +0800, Joel Stanley <[email protected]>, wrote:Hi Samuel,
On Mon, 1 Jul 2019 at 06:02, Samuel Jiang <[email protected]> wrote:
From: Samuel Jiang <[email protected]>
Initial Nuvoton RunBMC Module which use NPCM750 SoC.
Including features:
1. image partitions
2. lpc and kcs
3. usb
4. serial port
5. spi
6. fiu
7. watchdogDo you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Please test against 5.2.
Once these patches have had review we can include them in the openbmc tree.
Cheers,
Joel
Testeed:
Build Qunata runbmc-nuvoton image and load on RunBMC-nuvoton moduleSigned-off-by Samuel Jiang <[email protected]>---
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts| 292 +++++++++++++++++++1 file changed, 292 insertions(+)create mode 100644
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dtsarch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +292
-1@@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology [email protected] +// Copyright (c) 2019 Quanta Computer Inc. [email protected] + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 RunBMC Module"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet0 = &emc0; + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + udc0 = &udc0; + udc1 = &udc1; + udc2 = &udc2; + udc3 = &udc3; + udc4 = &udc4; + udc5 = &udc5; + udc6 = &udc6; + udc7 = &udc7; + udc8 = &udc8; + udc9 = &udc9; + emmc0 = &sdhci0; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + gmac0: eth@f0802000 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; + }; + + emc0: eth@f0825000 { + phy-mode = "rmii"; + use-ncsi; + status = "okay"; + }; + + ehci1: usb@f0806000 { + status = "okay"; + }; + + ohci1: ohci@f0807000 { + status = "okay"; + }; + + udc0:udc@f0830000 { + status = "okay"; + }; + + udc1:udc@f0831000 { + status = "okay"; + }; + + udc2:udc@f0832000 { + status = "okay"; + }; + + udc3:udc@f0833000 { + status = "okay"; + }; + + udc4:udc@f0834000 { + status = "okay"; + }; + + udc5:udc@f0835000 { + status = "okay"; + }; + + udc6:udc@f0836000 { + status = "okay"; + }; + + udc7:udc@f0837000 { + status = "okay"; + }; + + udc8:udc@f0838000 { + status = "okay"; + }; + + udc9:udc@f0839000 { + status = "okay"; + }; + + aes:aes@f0858000 { + status = "okay"; + }; + + sha:sha@f085a000 { + status = "okay"; + }; + + fiu0: fiu@fb000000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x4000000>; + }; + u-boot@0 { + label = "u-boot"; + read-only; + reg = <0x0000000 0x80000>; + }; + u-boot-env@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x0800000 0x1500000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + fiu3: fiu@c0000000 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + sdhci0: sdhci@f0842000 { + status = "okay"; + }; + + pcimbox: pcimbox@f0848000 { + status = "okay"; + }; + + vcd: vcd@f0810000 { + status = "okay"; + }; + + ece: ece@f0820000 { + status = "okay"; + }; + + apb { + + watchdog1: watchdog@901C { + status = "okay"; + }; + + rng: rng@b000 { + status = "okay"; + }; + + serial0: serial@1000 { + status = "okay"; + }; + + serial1: serial@2000 { + status = "okay"; + }; + + serial2: serial@3000 { + status = "okay"; + }; + + serial3: serial@4000 { + status = "okay"; + }; + + adc: adc@c000 { + status = "okay"; + }; + + otp:otp@189000 { + status = "okay"; + }; + + lpc_kcs: lpc_kcs@7000 { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; + }; + + lpc_host: lpc_host@7000 { + lpc_bpc: lpc_bpc@40 { + monitor-ports = <0x80>; + status = "okay"; + }; + }; + + spi0: spi@200000 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + spi1: spi@201000 { + status = "okay"; + }; + }; + }; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +}; --2.20.1
Hi Joel,
Quoted 12 lines · Joel Stanley
Quoted 7 lines · Samuel Jiang (江騏先)
Hi Joel,
Do you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
No, the patches still could not submit to the mainline kernel. We need
Nuvoton teams help fill up the related source code in the mainline.
We had submitted only basic NPCM7xx dtsi files to the Linux vanilla, We are planning to submit the NPCM7xx dtsi files soon but still I am not sure if it will include all the nodes we use because some of our drivers are still in upstream process so things could change.
meanwhile could you please upstream Quanta to OpenBMC Linux tree?
Quoted 363 lines
Why can't you submit them?
Patches are held in the openbmc tree only if they are on their way to be included in an upstream release.
Quoted 6 lines
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Based on the above reason, I prefer to keep “dev-5.17” part first and
will update 1/6 patches information.
Do you mean 5.1?
Quoted 1 line
After Nuvoton team members back, I will discuss with them the mainline
situation.
Quoted 9 lines
Thanks,
Samuel Jiang
On Jul 1, 2019, 2:57 PM +0800, Joel Stanley <[email protected]>, wrote:Hi Samuel,
On Mon, 1 Jul 2019 at 06:02, Samuel Jiang <[email protected]>
Quoted 19 lines · wrote:
From: Samuel Jiang <[email protected]>
Initial Nuvoton RunBMC Module which use NPCM750 SoC.
Including features:
1. image partitions
2. lpc and kcs
3. usb
4. serial port
5. spi
6. fiu
7. watchdogDo you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
Quoted 7 lines
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Please test against 5.2.
Once these patches have had review we can include them in the openbmc
tree.
Quoted 9 lines
Cheers,
Joel
Testeed:
Build Qunata runbmc-nuvoton image and load on RunBMC-nuvoton moduleReview
Quoted 7 lines
Signed-off-by Samuel Jiang <[email protected]>---
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts| 292 +++++++++++++++++++1 file changed, 292 insertions(+)create mode 100644
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts(quoted diff) +0
-0
b/arch/arm/boot/dts/nuvoton-npcm750-runbmc.dtsQuoted 292 lines
new file mode 100644
index 000000000000..eec815d2a638arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +287
-0@@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology [email protected] +// Copyright (c) 2019 Quanta Computer Inc. [email protected] + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 RunBMC Module"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet0 = &emc0; + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + udc0 = &udc0; + udc1 = &udc1; + udc2 = &udc2; + udc3 = &udc3; + udc4 = &udc4; + udc5 = &udc5; + udc6 = &udc6; + udc7 = &udc7; + udc8 = &udc8; + udc9 = &udc9; + emmc0 = &sdhci0; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + gmac0: eth@f0802000 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; + }; + + emc0: eth@f0825000 { + phy-mode = "rmii"; + use-ncsi; + status = "okay"; + }; + + ehci1: usb@f0806000 { + status = "okay"; + }; + + ohci1: ohci@f0807000 { + status = "okay"; + }; + + udc0:udc@f0830000 { + status = "okay"; + }; + + udc1:udc@f0831000 { + status = "okay"; + }; + + udc2:udc@f0832000 { + status = "okay"; + }; + + udc3:udc@f0833000 { + status = "okay"; + }; + + udc4:udc@f0834000 { + status = "okay"; + }; + + udc5:udc@f0835000 { + status = "okay"; + }; + + udc6:udc@f0836000 { + status = "okay"; + }; + + udc7:udc@f0837000 { + status = "okay"; + }; + + udc8:udc@f0838000 { + status = "okay"; + }; + + udc9:udc@f0839000 { + status = "okay"; + }; + + aes:aes@f0858000 { + status = "okay"; + }; + + sha:sha@f085a000 { + status = "okay"; + }; + + fiu0: fiu@fb000000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x4000000>; + }; + u-boot@0 { + label = "u-boot"; + read-only; + reg = <0x0000000 0x80000>; + }; + u-boot-env@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x0800000 0x1500000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + fiu3: fiu@c0000000 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + sdhci0: sdhci@f0842000 { + status = "okay"; + }; + + pcimbox: pcimbox@f0848000 { + status = "okay"; + }; + + vcd: vcd@f0810000 { + status = "okay"; + }; + + ece: ece@f0820000 { + status = "okay"; + }; + + apb { + + watchdog1: watchdog@901C { + status = "okay"; + }; + + rng: rng@b000 { + status = "okay"; + }; + + serial0: serial@1000 { + status = "okay"; + }; + + serial1: serial@2000 { + status = "okay"; + }; + + serial2: serial@3000 { + status = "okay"; + }; + + serial3: serial@4000 { + status = "okay"; + }; + + adc: adc@c000 { + status = "okay"; + }; + + otp:otp@189000 { + status = "okay"; + }; + + lpc_kcs: lpc_kcs@7000 { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; + }; + + lpc_host: lpc_host@7000 { + lpc_bpc: lpc_bpc@40 { + monitor-ports = <0x80>; + status = "okay"; + }; + }; + + spi0: spi@200000 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + spi1: spi@201000 { + status = "okay"; + }; + }; + }; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>;
Quoted 9 lines
Quoted 8 lines
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +5
-1+ + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +}; --2.20.1
Thanks a lot!
Tomer
Joel,
We had submitted only basic NPCM7xx dtsi files to the Linux vanilla, We are planning to submit the NPCM7xx dtsi files soon but still I am not sure if it will include all the nodes we use because some of our drivers are still in upstream process so things could change.
Like Tomer description, some of Nuvoton’s drivers still under review process in the mainline.
Doing my best, I could update the first patch become the basis for matches mainline NPCM7xx dtsi file and submit this. How about your thoughts?
Do you mean 5.1?
Yes, it means openbmc kernel branch dev-5.1
Thanks,
Samuel Jiang
On Jul 2, 2019, 10:58 PM +0800, Tomer Maimon <[email protected]>, wrote:
Hi Joel,
On Tue, 2 Jul 2019 at 08:47, Joel Stanley <[email protected]<mailto:[email protected]>> wrote:
Quoted 7 lines · On Mon, 1 Jul 2019 at 08:25, Samuel Jiang (江騏先)…
Hi Joel,
Do you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
No, the patches still could not submit to the mainline kernel. We need Nuvoton teams help fill up the related source code in the mainline.
We had submitted only basic NPCM7xx dtsi files to the Linux vanilla, We are planning to submit the NPCM7xx dtsi files soon but still I am not sure if it will include all the nodes we use because some of our drivers are still in upstream process so things could change.
meanwhile could you please upstream Quanta to OpenBMC Linux tree?
Why can't you submit them?
Patches are held in the openbmc tree only if they are on their way to be included in an upstream release.
Quoted 6 lines
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Based on the above reason, I prefer to keep “dev-5.17” part first and will update 1/6 patches information.
Do you mean 5.1?
Quoted 350 lines
After Nuvoton team members back, I will discuss with them the mainline situation.
Thanks,
Samuel Jiang
On Jul 1, 2019, 2:57 PM +0800, Joel Stanley <[email protected]<mailto:[email protected]>>, wrote:Hi Samuel,
On Mon, 1 Jul 2019 at 06:02, Samuel Jiang <[email protected]<mailto:[email protected]>> wrote:
From: Samuel Jiang <[email protected]<mailto:[email protected]>>
Initial Nuvoton RunBMC Module which use NPCM750 SoC.
Including features:
1. image partitions
2. lpc and kcs
3. usb
4. serial port
5. spi
6. fiu
7. watchdogDo you intend submit these patches to the mainline kernel for review? I would like to see them submitted there first.
When you do that, you don't need the "dev-5.17" part in your patch subjects. You also can include the "tested" information in the cover letter, but not in the patches themselves.
Please test against 5.2.
Once these patches have had review we can include them in the openbmc tree.
Cheers,
Joel
Testeed:
Build Qunata runbmc-nuvoton image and load on RunBMC-nuvoton module---
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts| 292 +++++++++++++++++++1 file changed, 292 insertions(+)create mode 100644
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dtsarch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +292
-1@@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology [email protected]<mailto:[email protected]> +// Copyright (c) 2019 Quanta Computer Inc. [email protected]<mailto:[email protected]> + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 RunBMC Module"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet0 = &emc0; + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + udc0 = &udc0; + udc1 = &udc1; + udc2 = &udc2; + udc3 = &udc3; + udc4 = &udc4; + udc5 = &udc5; + udc6 = &udc6; + udc7 = &udc7; + udc8 = &udc8; + udc9 = &udc9; + emmc0 = &sdhci0; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + gmac0: eth@f0802000 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; + }; + + emc0: eth@f0825000 { + phy-mode = "rmii"; + use-ncsi; + status = "okay"; + }; + + ehci1: usb@f0806000 { + status = "okay"; + }; + + ohci1: ohci@f0807000 { + status = "okay"; + }; + + udc0:udc@f0830000 { + status = "okay"; + }; + + udc1:udc@f0831000 { + status = "okay"; + }; + + udc2:udc@f0832000 { + status = "okay"; + }; + + udc3:udc@f0833000 { + status = "okay"; + }; + + udc4:udc@f0834000 { + status = "okay"; + }; + + udc5:udc@f0835000 { + status = "okay"; + }; + + udc6:udc@f0836000 { + status = "okay"; + }; + + udc7:udc@f0837000 { + status = "okay"; + }; + + udc8:udc@f0838000 { + status = "okay"; + }; + + udc9:udc@f0839000 { + status = "okay"; + }; + + aes:aes@f0858000 { + status = "okay"; + }; + + sha:sha@f085a000 { + status = "okay"; + }; + + fiu0: fiu@fb000000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x4000000>; + }; + u-boot@0 { + label = "u-boot"; + read-only; + reg = <0x0000000 0x80000>; + }; + u-boot-env@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x0800000 0x1500000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + fiu3: fiu@c0000000 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; + }; + + sdhci0: sdhci@f0842000 { + status = "okay"; + }; + + pcimbox: pcimbox@f0848000 { + status = "okay"; + }; + + vcd: vcd@f0810000 { + status = "okay"; + }; + + ece: ece@f0820000 { + status = "okay"; + }; + + apb { + + watchdog1: watchdog@901C { + status = "okay"; + }; + + rng: rng@b000 { + status = "okay"; + }; + + serial0: serial@1000 { + status = "okay"; + }; + + serial1: serial@2000 { + status = "okay"; + }; + + serial2: serial@3000 { + status = "okay"; + }; + + serial3: serial@4000 { + status = "okay"; + }; + + adc: adc@c000 { + status = "okay"; + }; + + otp:otp@189000 { + status = "okay"; + }; + + lpc_kcs: lpc_kcs@7000 { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; + }; + + lpc_host: lpc_host@7000 { + lpc_bpc: lpc_bpc@40 { + monitor-ports = <0x80>; + status = "okay"; + }; + }; + + spi0: spi@200000 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + spi1: spi@201000 { + status = "okay"; + }; + }; + }; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +}; --
Quoted 2 lines
2.20.1
Thanks a lot!
Tomer