Skip to contentSkip to conversation

arm64: dts: stratix10: Add NAND device node

PATCH New Dinh Nguyen 1 participant 1 message Jul 1, 2019

Subsystems (2)
lore
Share & tools
lore

Dinh Nguyen

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: stratix10: Add NAND device node

Add the NAND device node to the base Stratix10 DTS.

---
 .../arm64/boot/dts/altera/socfpga_stratix10.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +16 -0
index 5db9ff05fc33..7fea8ec4bab2 100644
@@ -313,6 +313,22 @@
 			status = "disabled";
 		};
 
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 97 4>;
+			clocks = <&clkmgr STRATIX10_NAND_CLK>,
+				 <&clkmgr STRATIX10_NAND_X_CLK>,
+				 <&clkmgr STRATIX10_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
 		ocram: sram@ffe00000 {
 			compatible = "mmio-sram";
 			reg = <0xffe00000 0x100000>;
Signature · 1 line
2.20.0