Skip to contentSkip to conversation

Add gve driver

PATCH In review Catherine Sullivan 3 participants 7 messages Jul 1, 2019 – Jul 2, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v4 cover Add gve driver

This patch series adds the gve driver which will support the Compute Engine Virtual NIC that will be available in the future.

v2:
- Patch 1:
- Remove gve_size_assert.h and use static_assert instead.
- Loop forever instead of bugging if the device won't reset
- Use module_pci_driver
- Patch 2:
- Use be16_to_cpu in the RX Seq No define
- Remove unneeded ndo_change_mtu
- Patch 3:
- No Changes
- Patch 4:
- Instead of checking netif_carrier_ok in ethtool stats, just make sure

v3:
- Patch 1:
- Remove X86 dep
- Patch 2:
- No changes
- Patch 3:
- No changes
- Patch 4:
- Remove unneeded memsets in ethtool stats

v4:
- Patch 1:
- Use io[read|write]32be instead of [read|write]l(cpu_to_be32())
- Explicitly add padding to gve_adminq_set_driver_parameter
- Use static where appropriate
- Patch 2:
- Use u64_stats_sync
- Explicity add padding to gve_adminq_create_rx_queue
- Fix some enianness typing issues found by kbuild
- Use static where appropriate
- Remove unused variables
- Patch 3:
- Use io[read|write]32be instead of [read|write]l(cpu_to_be32())
- Patch 4:
- Use u64_stats_sync
- Use static where appropriate
Warnings reported by:

Catherine Sullivan (4):
gve: Add basic driver framework for Compute Engine Virtual NIC
gve: Add transmit and receive support
gve: Add workqueue and reset support
gve: Add ethtool support

 .../networking/device_drivers/google/gve.rst  |  123 ++
 .../networking/device_drivers/index.rst       |    1 +
 MAINTAINERS                                   |    9 +
 drivers/net/ethernet/Kconfig                  |    1 +
 drivers/net/ethernet/Makefile                 |    1 +
 drivers/net/ethernet/google/Kconfig           |   27 +
 drivers/net/ethernet/google/Makefile          |    5 +
 drivers/net/ethernet/google/gve/Makefile      |    4 +
 drivers/net/ethernet/google/gve/gve.h         |  459 ++++++
 drivers/net/ethernet/google/gve/gve_adminq.c  |  387 ++++++
 drivers/net/ethernet/google/gve/gve_adminq.h  |  217 +++
 drivers/net/ethernet/google/gve/gve_desc.h    |  113 ++
 drivers/net/ethernet/google/gve/gve_ethtool.c |  243 ++++
 drivers/net/ethernet/google/gve/gve_main.c    | 1228 +++++++++++++++++
 .../net/ethernet/google/gve/gve_register.h    |   27 +
 drivers/net/ethernet/google/gve/gve_rx.c      |  446 ++++++
 drivers/net/ethernet/google/gve/gve_tx.c      |  584 ++++++++
 17 files changed, 3875 insertions(+)
 create mode 100644 Documentation/networking/device_drivers/google/gve.rst
 create mode 100644 drivers/net/ethernet/google/Kconfig
 create mode 100644 drivers/net/ethernet/google/Makefile
 create mode 100644 drivers/net/ethernet/google/gve/Makefile
 create mode 100644 drivers/net/ethernet/google/gve/gve.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_adminq.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_adminq.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_desc.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_ethtool.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_main.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_register.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_rx.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_tx.c
Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
#1 lore raw

PATCH v4 1/4 gve: Add basic driver framework for Compute Engine Virtual NIC

Add a driver framework for the Compute Engine Virtual NIC that will be available in the future.

At this point the only functionality is loading the driver.

---
 .../networking/device_drivers/google/gve.rst  |  82 ++++
 .../networking/device_drivers/index.rst       |   1 +
 MAINTAINERS                                   |   9 +
 drivers/net/ethernet/Kconfig                  |   1 +
 drivers/net/ethernet/Makefile                 |   1 +
 drivers/net/ethernet/google/Kconfig           |  27 ++
 drivers/net/ethernet/google/Makefile          |   5 +
 drivers/net/ethernet/google/gve/Makefile      |   4 +
 drivers/net/ethernet/google/gve/gve.h         | 135 ++++++
 drivers/net/ethernet/google/gve/gve_adminq.c  | 249 ++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h  | 134 ++++++
 drivers/net/ethernet/google/gve/gve_main.c    | 446 ++++++++++++++++++
 .../net/ethernet/google/gve/gve_register.h    |  27 ++
 13 files changed, 1121 insertions(+)
 create mode 100644 Documentation/networking/device_drivers/google/gve.rst
 create mode 100644 drivers/net/ethernet/google/Kconfig
 create mode 100644 drivers/net/ethernet/google/Makefile
 create mode 100644 drivers/net/ethernet/google/gve/Makefile
 create mode 100644 drivers/net/ethernet/google/gve/gve.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_adminq.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_adminq.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_main.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_register.h
Documentation/networking/device_drivers/google/gve.rst new file +82 -0
new file mode 100644
index 000000000000..7397c82f4c8f
@@ -0,0 +1,82 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+==============================================================
+Linux kernel driver for Compute Engine Virtual Ethernet (gve):
+==============================================================
+
+Supported Hardware
+===================
+The GVE driver binds to a single PCI device id used by the virtual
+Ethernet device found in some Compute Engine VMs.
+
++--------------+----------+---------+
+|Field         | Value    | Comments|
++==============+==========+=========+
+|Vendor ID     | `0x1AE0` | Google  |
++--------------+----------+---------+
+|Device ID     | `0x0042` |         |
++--------------+----------+---------+
+|Sub-vendor ID | `0x1AE0` | Google  |
++--------------+----------+---------+
+|Sub-device ID | `0x0058` |         |
++--------------+----------+---------+
+|Revision ID   | `0x0`    |         |
++--------------+----------+---------+
+|Device Class  | `0x200`  | Ethernet|
++--------------+----------+---------+
+
+PCI Bars
+========
+The gVNIC PCI device exposes three 32-bit memory BARS:
+- Bar0 - Device configuration and status registers.
+- Bar1 - MSI-X vector table
+- Bar2 - IRQ, RX and TX doorbells
+
+Device Interactions
+===================
+The driver interacts with the device in the following ways:
+ - Registers
+    - A block of MMIO registers
+    - See gve_register.h for more detail
+ - Admin Queue
+    - See description below
+ - Interrupts
+    - See supported interrupts below
+
+Registers
+---------
+All registers are MMIO and big endian.
+
+The registers are used for initializing and configuring the device as well as
+querying device status in response to management interrupts.
+
+Admin Queue (AQ)
+----------------
+The Admin Queue is a PAGE_SIZE memory block, treated as an array of AQ
+commands, used by the driver to issue commands to the device and set up
+resources.The driver and the device maintain a count of how many commands
+have been submitted and executed. To issue AQ commands, the driver must do
+the following (with proper locking):
+
+1)  Copy new commands into next available slots in the AQ array
+2)  Increment its counter by he number of new commands
+3)  Write the counter into the GVE_ADMIN_QUEUE_DOORBELL register
+4)  Poll the ADMIN_QUEUE_EVENT_COUNTER register until it equals
+    the value written to the doorbell, or until a timeout.
+
+The device will update the status field in each AQ command reported as
+executed through the ADMIN_QUEUE_EVENT_COUNTER register.
+
+Interrupts
+----------
+The following interrupts are supported by the driver:
+
+Management Interrupt
+~~~~~~~~~~~~~~~~~~~~
+The management interrupt is used by the device to tell the driver to
+look at the GVE_DEVICE_STATUS register.
+
+Notification Block Interrupts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The notification block interrupts are used to tell the driver to poll
+the queues associated with that interrupt.
Documentation/networking/device_drivers/index.rst +1 -0
index 24598d5f8ffa..2b7fefe72351 100644
@@ -21,6 +21,7 @@ Contents:
    intel/i40e
    intel/iavf
    intel/ice
+   google/gve
    mellanox/mlx5
 
 .. only::  subproject
MAINTAINERS +9 -0
index b4304d10f14e..449e7cdb3303 100644
@@ -6720,6 +6720,15 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/input/touchscreen/goodix.c
 
+GOOGLE ETHERNET DRIVERS
+M:	Catherine Sullivan <[email protected]>
+R:	Sagi Shahar <[email protected]>
+R:	Jon Olson <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	Documentation/networking/device_drivers/google/gve.txt
+F:	drivers/net/ethernet/google
+
 GPD POCKET FAN DRIVER
 M:	Hans de Goede <[email protected]>
 L:	[email protected]
drivers/net/ethernet/Kconfig +1 -0
index fe115b7caba0..93a2d4deb27c 100644
@@ -76,6 +76,7 @@ source "drivers/net/ethernet/ezchip/Kconfig"
 source "drivers/net/ethernet/faraday/Kconfig"
 source "drivers/net/ethernet/freescale/Kconfig"
 source "drivers/net/ethernet/fujitsu/Kconfig"
+source "drivers/net/ethernet/google/Kconfig"
 source "drivers/net/ethernet/hisilicon/Kconfig"
 source "drivers/net/ethernet/hp/Kconfig"
 source "drivers/net/ethernet/huawei/Kconfig"
drivers/net/ethernet/Makefile +1 -0
index 7b5bf9682066..fb9155cffcff 100644
@@ -39,6 +39,7 @@ obj-$(CONFIG_NET_VENDOR_EZCHIP) += ezchip/
 obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
 obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/
 obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
+obj-$(CONFIG_NET_VENDOR_GOOGLE) += google/
 obj-$(CONFIG_NET_VENDOR_HISILICON) += hisilicon/
 obj-$(CONFIG_NET_VENDOR_HP) += hp/
 obj-$(CONFIG_NET_VENDOR_HUAWEI) += huawei/
drivers/net/ethernet/google/Kconfig new file +27 -0
new file mode 100644
index 000000000000..b8f04d052fda
@@ -0,0 +1,27 @@
+#
+# Google network device configuration
+#
+
+config NET_VENDOR_GOOGLE
+	bool "Google Devices"
+	default y
+	help
+	  If you have a network (Ethernet) device belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Google devices. If you say Y, you will be asked
+	  for your specific device in the following questions.
+
+if NET_VENDOR_GOOGLE
+
+config GVE
+	tristate "Google Virtual NIC (gVNIC) support"
+	depends on PCI_MSI
+	help
+	  This driver supports Google Virtual NIC (gVNIC)"
+
+	  To compile this driver as a module, choose M here.
+	  The module will be called gve.
+
+endif #NET_VENDOR_GOOGLE
drivers/net/ethernet/google/Makefile new file +5 -0
new file mode 100644
index 000000000000..402cc3ba1639
@@ -0,0 +1,5 @@
+#
+# Makefile for the Google network device drivers.
+#
+
+obj-$(CONFIG_GVE) += gve/
drivers/net/ethernet/google/gve/Makefile new file +4 -0
new file mode 100644
index 000000000000..cec03ee6d931
@@ -0,0 +1,4 @@
+# Makefile for the Google virtual Ethernet (gve) driver
+
+obj-$(CONFIG_GVE) += gve.o
+gve-objs := gve_main.o gve_adminq.o
drivers/net/ethernet/google/gve/gve.h new file +135 -0

135 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_adminq.c new file +249 -0

249 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_adminq.h new file +134 -0

134 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_main.c new file +446 -0

446 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_register.h new file +27 -0
new file mode 100644
index 000000000000..84ab8893aadd
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ * Google virtual Ethernet (gve) driver
+ *
+ * Copyright (C) 2015-2019 Google, Inc.
+ */
+
+#ifndef _GVE_REGISTER_H_
+#define _GVE_REGISTER_H_
+
+/* Fixed Configuration Registers */
+struct gve_registers {
+	__be32	device_status;
+	__be32	driver_status;
+	__be32	max_tx_queues;
+	__be32	max_rx_queues;
+	__be32	adminq_pfn;
+	__be32	adminq_doorbell;
+	__be32	adminq_event_counter;
+	u8	reserved[3];
+	u8	driver_version;
+};
+
+enum gve_device_status_flags {
+	GVE_DEVICE_STATUS_RESET_MASK		= BIT(1),
+	GVE_DEVICE_STATUS_LINK_STATUS_MASK	= BIT(2),
+};
+#endif /* _GVE_REGISTER_H_ */
Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
#2 lore raw

Re: [PATCH net-next v4 1/4] gve: Add basic driver framework for Compute Engine Virtual NIC

Quoted 11 lines · Catherine Sullivan

Add a driver framework for the Compute Engine Virtual NIC that will be available in the future.

At this point the only functionality is loading the driver.

Documentation/networking/device_drivers/google/gve.rst line 62

Quoted 10 lines
Documentation/networking/device_drivers/google/gve.rst new file +10 -0
+Admin Queue (AQ)
+----------------
+The Admin Queue is a PAGE_SIZE memory block, treated as an array of AQ
+commands, used by the driver to issue commands to the device and set up
+resources.The driver and the device maintain a count of how many commands
+have been submitted and executed. To issue AQ commands, the driver must do
+the following (with proper locking):
+
+1)  Copy new commands into next available slots in the AQ array
+2)  Increment its counter by he number of new commands

s/he/the/

Quoted 13 lines

+3) Write the counter into the GVE_ADMIN_QUEUE_DOORBELL register +4) Poll the ADMIN_QUEUE_EVENT_COUNTER register until it equals

drivers/net/ethernet/google/gve/gve_adminq.c new file +10 -0
+    the value written to the doorbell, or until a timeout.
+
+The device will update the status field in each AQ command reported as
+executed through the ADMIN_QUEUE_EVENT_COUNTER register.
+
 
+/* This function is not threadsafe - the caller is responsible for any
+ * necessary locks.
+ */
+int gve_adminq_execute_cmd(struct gve_priv *priv,
+			   union gve_adminq_command *cmd_orig)

drivers/net/ethernet/google/gve/gve_adminq.c line 138

Quoted 10 lines
drivers/net/ethernet/google/gve/gve_adminq.c new file +10 -0
+{
+	union gve_adminq_command *cmd;
+	u32 status = 0;
+	u32 prod_cnt;
+
+	cmd = &priv->adminq[priv->adminq_prod_cnt & priv->adminq_mask];
+	priv->adminq_prod_cnt++;
+	prod_cnt = priv->adminq_prod_cnt;
+
+	memcpy(cmd, cmd_orig, sizeof(*cmd_orig));

Eh, I guess you don't even need memory barriers around the data movement to the DMA buffer because of the restriction to x86? :)

Quoted 36 lines
drivers/net/ethernet/google/gve/gve_adminq.c new file +34 -0
+	gve_adminq_kick_cmd(priv, prod_cnt);
+	if (!gve_adminq_wait_for_cmd(priv, prod_cnt)) {
+		dev_err(&priv->pdev->dev, "AQ command timed out, need to reset AQ\n");
+		return -ENOTRECOVERABLE;
+	}
 
+	memcpy(cmd_orig, cmd, sizeof(*cmd));
+	status = be32_to_cpu(READ_ONCE(cmd->status));
+	return gve_adminq_parse_err(&priv->pdev->dev, status);
+}
 
+int gve_adminq_describe_device(struct gve_priv *priv)
+{
+	struct gve_device_descriptor *descriptor;
+	union gve_adminq_command cmd;
+	dma_addr_t descriptor_bus;
+	int err = 0;
+	u8 *mac;
+	u16 mtu;
+
+	memset(&cmd, 0, sizeof(cmd));
+	descriptor = dma_alloc_coherent(&priv->pdev->dev, PAGE_SIZE,
+					&descriptor_bus, GFP_KERNEL);
+	if (!descriptor)
+		return -ENOMEM;
+	cmd.opcode = cpu_to_be32(GVE_ADMINQ_DESCRIBE_DEVICE);
+	cmd.describe_device.device_descriptor_addr =
+						cpu_to_be64(descriptor_bus);
+	cmd.describe_device.device_descriptor_version =
+			cpu_to_be32(GVE_ADMINQ_DEVICE_DESCRIPTOR_VERSION);
+	cmd.describe_device.available_length = cpu_to_be32(PAGE_SIZE);
+
+	err = gve_adminq_execute_cmd(priv, &cmd);
+	if (err)
+		goto free_device_descriptor;
+

drivers/net/ethernet/google/gve/gve_adminq.c line 227

Quoted 10 lines
drivers/net/ethernet/google/gve/gve_adminq.c new file +10 -0
+	mtu = be16_to_cpu(descriptor->mtu);
+	if (mtu < ETH_MIN_MTU) {
+		netif_err(priv, drv, priv->dev, "MTU %d below minimum MTU\n",
+			  mtu);
+		err = -EINVAL;
+		goto free_device_descriptor;
+	}
+	priv->dev->max_mtu = mtu;
+	priv->num_event_counters = be16_to_cpu(descriptor->counters);
+	ether_addr_copy(priv->dev->dev_addr, descriptor->mac);

Since you check MTU you can check the address with is_valid_ether_addr().

Also it's common practice to copy the provisioned MAC to netdev->perm_addr as well as dev_addr for VFs.

drivers/net/ethernet/google/gve/gve_adminq.c line 235

Quoted 8 lines
drivers/net/ethernet/google/gve/gve_adminq.c new file +8 -0
+	mac = descriptor->mac;
+	netif_info(priv, drv, priv->dev, "MAC addr: %pM\n", mac);
+
+free_device_descriptor:
+	dma_free_coherent(&priv->pdev->dev, sizeof(*descriptor), descriptor,
+			  descriptor_bus);
+	return err;
+}

Oh, okay, David already applied..

#3 lore raw

PATCH v4 2/4 gve: Add transmit and receive support

In reply to Catherine Sullivan

Add support for passing traffic.

---
 .../networking/device_drivers/google/gve.rst  |  30 +
 drivers/net/ethernet/google/gve/Makefile      |   2 +-
 drivers/net/ethernet/google/gve/gve.h         | 260 +++++++-
 drivers/net/ethernet/google/gve/gve_adminq.c  | 138 +++++
 drivers/net/ethernet/google/gve/gve_adminq.h  |  83 +++
 drivers/net/ethernet/google/gve/gve_desc.h    | 113 ++++
 drivers/net/ethernet/google/gve/gve_main.c    | 573 ++++++++++++++++-
 drivers/net/ethernet/google/gve/gve_rx.c      | 443 +++++++++++++
 drivers/net/ethernet/google/gve/gve_tx.c      | 584 ++++++++++++++++++
 9 files changed, 2221 insertions(+), 5 deletions(-)
 create mode 100644 drivers/net/ethernet/google/gve/gve_desc.h
 create mode 100644 drivers/net/ethernet/google/gve/gve_rx.c
 create mode 100644 drivers/net/ethernet/google/gve/gve_tx.c
Documentation/networking/device_drivers/google/gve.rst +30 -0
index 7397c82f4c8f..df8974fb3270 100644
@@ -42,6 +42,8 @@ The driver interacts with the device in the following ways:
     - See description below
  - Interrupts
     - See supported interrupts below
+ - Transmit and Receive Queues
+    - See description below
 
 Registers
 ---------
@@ -80,3 +82,31 @@ Notification Block Interrupts
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 The notification block interrupts are used to tell the driver to poll
 the queues associated with that interrupt.
+
+The handler for these irqs schedule the napi for that block to run
+and poll the queues.
+
+Traffic Queues
+--------------
+gVNIC's queues are composed of a descriptor ring and a buffer and are
+assigned to a notification block.
+
+The descriptor rings are power-of-two-sized ring buffers consisting of
+fixed-size descriptors. They advance their head pointer using a __be32
+doorbell located in Bar2. The tail pointers are advanced by consuming
+descriptors in-order and updating a __be32 counter. Both the doorbell
+and the counter overflow to zero.
+
+Each queue's buffers must be registered in advance with the device as a
+queue page list, and packet data can only be put in those pages.
+
+Transmit
+~~~~~~~~
+gve maps the buffers for transmit rings into a FIFO and copies the packets
+into the FIFO before sending them to the NIC.
+
+Receive
+~~~~~~~
+The buffers for receive rings are put into a data ring that is the same
+length as the descriptor ring and the head and tail pointers advance over
+the rings together.
drivers/net/ethernet/google/gve/Makefile +1 -1
index cec03ee6d931..a1890c93705b 100644
@@ -1,4 +1,4 @@
 # Makefile for the Google virtual Ethernet (gve) driver
 
 obj-$(CONFIG_GVE) += gve.o
-gve-objs := gve_main.o gve_adminq.o
+gve-objs := gve_main.o gve_tx.o gve_rx.o gve_adminq.o
drivers/net/ethernet/google/gve/gve.h +259 -1

300 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_adminq.c +138 -0

162 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_adminq.h +83 -0

107 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_desc.h new file +113 -0

113 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_main.c +570 -3

643 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_rx.c new file +443 -0

443 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_tx.c new file +584 -0

584 lines not on this page · raw message

Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
#4 lore raw

PATCH v4 3/4 gve: Add workqueue and reset support

In reply to Catherine Sullivan

Add support for the workqueue to handle management interrupts and support for resets.

---
 .../networking/device_drivers/google/gve.rst  |  11 +
 drivers/net/ethernet/google/gve/gve.h         |  62 ++++++
 drivers/net/ethernet/google/gve/gve_main.c    | 190 +++++++++++++++++-
 drivers/net/ethernet/google/gve/gve_rx.c      |   5 +-
 4 files changed, 260 insertions(+), 8 deletions(-)
Documentation/networking/device_drivers/google/gve.rst +11 -0
index df8974fb3270..793693cef6e3 100644
@@ -40,6 +40,8 @@ The driver interacts with the device in the following ways:
     - See gve_register.h for more detail
  - Admin Queue
     - See description below
+ - Reset
+    - At any time the device can be reset
  - Interrupts
     - See supported interrupts below
  - Transmit and Receive Queues
@@ -69,6 +71,12 @@ the following (with proper locking):
 The device will update the status field in each AQ command reported as
 executed through the ADMIN_QUEUE_EVENT_COUNTER register.
 
+Device Resets
+-------------
+A device reset is triggered by writing 0x0 to the AQ PFN register.
+This causes the device to release all resources allocated by the
+driver, including the AQ itself.
+
 Interrupts
 ----------
 The following interrupts are supported by the driver:
@@ -78,6 +86,9 @@ Management Interrupt
 The management interrupt is used by the device to tell the driver to
 look at the GVE_DEVICE_STATUS register.
 
+The handler for the management irq simply queues the service task in
+the workqueue to check the register and acks the irq.
+
 Notification Block Interrupts
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 The notification block interrupts are used to tell the driver to poll
drivers/net/ethernet/google/gve/gve.h +62 -0

81 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_main.c +183 -7

327 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_rx.c +4 -1
index 2254857eac50..84e0ecce14c4 100644
@@ -334,6 +334,9 @@ static bool gve_rx(struct gve_rx_ring *rx, struct gve_rx_desc *rx_desc,
 #endif
 
 have_skb:
+	/* We didn't manage to allocate an skb but we haven't had any
+	 * reset worthy failures.
+	 */
 	if (!skb)
 		return true;
 
@@ -399,7 +402,7 @@ bool gve_clean_rx_done(struct gve_rx_ring *rx, int budget,
 			   rx->desc.seqno);
 		bytes += be16_to_cpu(desc->len) - GVE_RX_PAD;
 		if (!gve_rx(rx, desc, feat))
-			return false;
+			gve_schedule_reset(priv);
 		cnt++;
 		idx = cnt & rx->desc.mask;
 		desc = rx->desc.desc_ring + idx;
Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
#5 lore raw

PATCH v4 4/4 gve: Add ethtool support

In reply to Catherine Sullivan

Add support for the following ethtool commands:

ethtool -s|--change devname [msglvl N] [msglevel type on|off]
ethtool -S|--statistics devname
ethtool -i|--driver devname
ethtool -l|--show-channels devname
ethtool -L|--set-channels devname
ethtool -g|--show-ring devname

ethtool --reset devname

---
 drivers/net/ethernet/google/gve/Makefile      |   2 +-
 drivers/net/ethernet/google/gve/gve.h         |   4 +
 drivers/net/ethernet/google/gve/gve_ethtool.c | 243 ++++++++++++++++++
 drivers/net/ethernet/google/gve/gve_main.c    |  41 ++-
 4 files changed, 288 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/ethernet/google/gve/gve_ethtool.c
drivers/net/ethernet/google/gve/Makefile +1 -1
index a1890c93705b..3354ce40eb97 100644
@@ -1,4 +1,4 @@
 # Makefile for the Google virtual Ethernet (gve) driver
 
 obj-$(CONFIG_GVE) += gve.o
-gve-objs := gve_main.o gve_tx.o gve_rx.o gve_adminq.o
+gve-objs := gve_main.o gve_tx.o gve_rx.o gve_ethtool.o gve_adminq.o
drivers/net/ethernet/google/gve/gve.h +4 -0
index 7960d5532078..92372dc43be8 100644
@@ -452,4 +452,8 @@ int gve_reset(struct gve_priv *priv, bool attempt_teardown);
 int gve_adjust_queues(struct gve_priv *priv,
 		      struct gve_queue_config new_rx_config,
 		      struct gve_queue_config new_tx_config);
+/* exported by ethtool.c */
+extern const struct ethtool_ops gve_ethtool_ops;
+/* needed by ethtool */
+extern const char gve_version_str[];
 #endif /* _GVE_H_ */
drivers/net/ethernet/google/gve/gve_ethtool.c new file +243 -0

243 lines not on this page · raw message

drivers/net/ethernet/google/gve/gve_main.c +40 -1

59 lines not on this page · raw message

Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
maintainer
#6 lore raw
In reply to Catherine Sullivan

From: Catherine Sullivan <[email protected]>
Date: Mon, 1 Jul 2019 15:57:51 -0700

Quoted 2 lines

This patch series adds the gve driver which will support the Compute Engine Virtual NIC that will be available in the future.

...

Series applied to net-next, thanks.