ipinctrl: qcom: Add support for SM8150
Subsystems (6)
v2 cover ipinctrl: qcom: Add support for SM8150
This series adds binding and driver for SM8150 pinctrl block. Also fixes one binding missing gpio node for msm8998.
Changes since v2:
- Order the function names and squash functions
- document gpio-ranges and gpio-reserved-ranges
- change ufs reset to be after gpios
- fix pin58 having qdss_cti twice
- remove .owner
- Add one patch for missing gpio nodes
Prasad Sodagudi (2):
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
pinctrl: qcom: Add SM8150 pinctrl driver
Vinod Koul (1):
dt-bindings: pinctrl: qcom: Document missing gpio nodes
.../bindings/pinctrl/qcom,msm8998-pinctrl.txt | 10 + .../bindings/pinctrl/qcom,sm8150-pinctrl.txt | 190 ++ drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sm8150.c | 1548 +++++++++++++++++ 5 files changed, 1758 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8150.c
Signature · 1 line
2.20.1
PATCH v2 1/3 dt-bindings: pinctrl: qcom: Document missing gpio nodes
The bindings for msm8998-pinctrl was missing gpio-ranges and gpio-reserved-ranges, so document them as well
--- .../bindings/pinctrl/qcom,msm8998-pinctrl.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt +10 -0
@@ -40,6 +40,14 @@ MSM8998 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings.
@@ -175,6 +183,8 @@ Example: interrupts = <0 208 0>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <81 4>; interrupt-controller; #interrupt-cells = <2>;
Signature · 1 line
2.20.1
Re: [PATCH v2 1/3] dt-bindings: pinctrl: qcom: Document missing gpio nodes
Quoted 4 lines · Vinod Koul
The bindings for msm8998-pinctrl was missing gpio-ranges and gpio-reserved-ranges, so document them as well
Signed-off-by Vinod Koul <[email protected]>
Quoted 35 lines
--- .../bindings/pinctrl/qcom,msm8998-pinctrl.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt +10
-0@@ -40,6 +40,14 @@ MSM8998 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings.@@ -175,6 +183,8 @@ Example: interrupts = <0 208 0>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <81 4>; interrupt-controller; #interrupt-cells = <2>;Signature · 1 line
2.20.1
Re: [PATCH v2 1/3] dt-bindings: pinctrl: qcom: Document missing gpio nodes
In reply to Vinod KoulQuoted 4 lines · Vinod Koul
The bindings for msm8998-pinctrl was missing gpio-ranges and gpio-reserved-ranges, so document them as well
Signed-off-by Vinod Koul <[email protected]>
Patch applied with Bjorn's ACK.
Yours,
Linus Walleij
PATCH v2 2/3 dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
In reply to Vinod KoulFrom: Prasad Sodagudi <[email protected]>
Add the binding for the TLMM pinctrl block found in the SM8150 platform.
[vkoul: add missing nodes of gpio range and reserved
rewrote function names and order them]
--- .../bindings/pinctrl/qcom,sm8150-pinctrl.txt | 190 ++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt
Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt new file +190 -0
@@ -0,0 +1,190 @@ +Qualcomm SM8150 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +QCS404 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sm8150-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the north, south, west + and east TLMM tiles. + +- reg-names: + Usage: required + Value type: <prop-encoded-array> + Defintiion: names for the cells of reg, must contain "north", "south" + "west" and "east". + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Value type: <prop-encoded-array> + Definition: see ../gpio/gpio.txt + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio149 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, + sdc2_data sdc1_rclk + Supports bias and drive-strength + + ufs_reset + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, + audio_ref, atest_usb1, atest_usb2, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb20, + atest_usb21, atest_usb22, atest_usb2, atest_usb23, + btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, + emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, + pa_indicator, pci_e0, phase_flag, pll_bypassnl, + pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, + prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, + qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, + qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, + qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, + sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, + tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, + usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@3000000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03D00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <126 4>; + interrupt-controller; + #interrupt-cells = <2>; + };
Signature · 1 line
2.20.1
Re: [PATCH v2 2/3] dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
Quoted 9 lines · Vinod Koul
From: Prasad Sodagudi <[email protected]>
Add the binding for the TLMM pinctrl block found in the SM8150 platform.
Signed-off-by Prasad Sodagudi <[email protected]>Signed-off-by Isaac J. Manjarres <[email protected]>[vkoul: add missing nodes of gpio range and reserved
rewrote function names and order them]Signed-off-by Vinod Koul <[email protected]>
Quoted 204 lines
--- .../bindings/pinctrl/qcom,sm8150-pinctrl.txt | 190 ++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txtDocumentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt new file +190
-0@@ -0,0 +1,190 @@ +Qualcomm SM8150 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +QCS404 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sm8150-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the north, south, west + and east TLMM tiles. + +- reg-names: + Usage: required + Value type: <prop-encoded-array> + Defintiion: names for the cells of reg, must contain "north", "south" + "west" and "east". + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Value type: <prop-encoded-array> + Definition: see ../gpio/gpio.txt + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio149 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, + sdc2_data sdc1_rclk + Supports bias and drive-strength + + ufs_reset + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, + audio_ref, atest_usb1, atest_usb2, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb20, + atest_usb21, atest_usb22, atest_usb2, atest_usb23, + btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, + emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, + pa_indicator, pci_e0, phase_flag, pll_bypassnl, + pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, + prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, + qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, + qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, + qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, + sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, + tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, + usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@3000000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03D00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <126 4>; + interrupt-controller; + #interrupt-cells = <2>; + };Signature · 1 line
2.20.1
Re: [PATCH v2 2/3] dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
In reply to Vinod KoulQuoted 9 lines · Vinod Koul
From: Prasad Sodagudi <[email protected]>
Add the binding for the TLMM pinctrl block found in the SM8150 platform.
Signed-off-by Prasad Sodagudi <[email protected]>Signed-off-by Isaac J. Manjarres <[email protected]>[vkoul: add missing nodes of gpio range and reserved
rewrote function names and order them]Signed-off-by Vinod Koul <[email protected]>
Patch applied with Bjorn's ACK.
Yours,
Linus Walleij
PATCH v2 3/3 pinctrl: qcom: Add SM8150 pinctrl driver
In reply to Vinod KoulFrom: Prasad Sodagudi <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for SM8150
[vkoul: modify to use upstream tile support
use upstream code style
order the functions and squash functions]
--- drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sm8150.c | 1548 +++++++++++++++++++++++++ 3 files changed, 1558 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8150.c
drivers/pinctrl/qcom/Kconfig +9 -0
@@ -175,4 +175,13 @@ config PINCTRL_SDM845 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SDM845 platform. +config PINCTRL_SM8150 + tristate "Qualcomm Technologies Inc SM8150 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SM8150 platform. + endif
drivers/pinctrl/qcom/Makefile +1 -0
@@ -22,3 +22,4 @@ obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o +obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
drivers/pinctrl/qcom/pinctrl-sm8150.c new file +1548 -0
1,548 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [PATCH v2 3/3] pinctrl: qcom: Add SM8150 pinctrl driver
Quoted 11 lines · Vinod Koul
From: Prasad Sodagudi <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for SM8150
Signed-off-by Prasad Sodagudi <[email protected]>Signed-off-by Isaac J. Manjarres <[email protected]>[vkoul: modify to use upstream tile support
use upstream code style
order the functions and squash functions]Signed-off-by Vinod Koul <[email protected]>
Quoted 1,591 lines
--- drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sm8150.c | 1548 +++++++++++++++++++++++++ 3 files changed, 1558 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8150.cdrivers/pinctrl/qcom/Kconfig +9
-0@@ -175,4 +175,13 @@ config PINCTRL_SDM845 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SDM845 platform. +config PINCTRL_SM8150 + tristate "Qualcomm Technologies Inc SM8150 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SM8150 platform. + endifdrivers/pinctrl/qcom/Makefile +1
-0@@ -22,3 +22,4 @@ obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o +obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.odrivers/pinctrl/qcom/pinctrl-sm8150.c new file +1548
-0@@ -0,0 +1,1548 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +static const char *const sm8150_tiles[] = { +"north" , +"south" , +"east" , +"west" +}; + +enum { +NORTH , +SOUTH , +EAST , +WEST +}; + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = 0x1000 * id, \ + .io_reg = 0x1000 * id + 0x4, \ + .intr_cfg_reg = 0x1000 * id + 0x8, \ + .intr_status_reg = 0x1000 * id + 0xc, \ + .intr_target_reg = 0x1000 * id + 0x8, \ + .tile = _tile, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .tile = NORTH, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +#define UFS_RESET (pg_name, offset) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = offset, \ + .io_reg = offset + 0x4, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .tile = SOUTH, \ + .mux_bit = -1, \ + .pull_bit = 3, \ + .drv_bit = 0, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = 0, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sm8150_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"GPIO_114" ), +PINCTRL_PIN (115 ,"GPIO_115" ), +PINCTRL_PIN (116 ,"GPIO_116" ), +PINCTRL_PIN (117 ,"GPIO_117" ), +PINCTRL_PIN (118 ,"GPIO_118" ), +PINCTRL_PIN (119 ,"GPIO_119" ), +PINCTRL_PIN (120 ,"GPIO_120" ), +PINCTRL_PIN (121 ,"GPIO_121" ), +PINCTRL_PIN (122 ,"GPIO_122" ), +PINCTRL_PIN (123 ,"GPIO_123" ), +PINCTRL_PIN (124 ,"GPIO_124" ), +PINCTRL_PIN (125 ,"GPIO_125" ), +PINCTRL_PIN (126 ,"GPIO_126" ), +PINCTRL_PIN (127 ,"GPIO_127" ), +PINCTRL_PIN (128 ,"GPIO_128" ), +PINCTRL_PIN (129 ,"GPIO_129" ), +PINCTRL_PIN (130 ,"GPIO_130" ), +PINCTRL_PIN (131 ,"GPIO_131" ), +PINCTRL_PIN (132 ,"GPIO_132" ), +PINCTRL_PIN (133 ,"GPIO_133" ), +PINCTRL_PIN (134 ,"GPIO_134" ), +PINCTRL_PIN (135 ,"GPIO_135" ), +PINCTRL_PIN (136 ,"GPIO_136" ), +PINCTRL_PIN (137 ,"GPIO_137" ), +PINCTRL_PIN (138 ,"GPIO_138" ), +PINCTRL_PIN (139 ,"GPIO_139" ), +PINCTRL_PIN (140 ,"GPIO_140" ), +PINCTRL_PIN (141 ,"GPIO_141" ), +PINCTRL_PIN (142 ,"GPIO_142" ), +PINCTRL_PIN (143 ,"GPIO_143" ), +PINCTRL_PIN (144 ,"GPIO_144" ), +PINCTRL_PIN (145 ,"GPIO_145" ), +PINCTRL_PIN (146 ,"GPIO_146" ), +PINCTRL_PIN (147 ,"GPIO_147" ), +PINCTRL_PIN (148 ,"GPIO_148" ), +PINCTRL_PIN (149 ,"GPIO_149" ), +PINCTRL_PIN (150 ,"GPIO_150" ), +PINCTRL_PIN (151 ,"GPIO_151" ), +PINCTRL_PIN (152 ,"GPIO_152" ), +PINCTRL_PIN (153 ,"GPIO_153" ), +PINCTRL_PIN (154 ,"GPIO_154" ), +PINCTRL_PIN (155 ,"GPIO_155" ), +PINCTRL_PIN (156 ,"GPIO_156" ), +PINCTRL_PIN (157 ,"GPIO_157" ), +PINCTRL_PIN (158 ,"GPIO_158" ), +PINCTRL_PIN (159 ,"GPIO_159" ), +PINCTRL_PIN (160 ,"GPIO_160" ), +PINCTRL_PIN (161 ,"GPIO_161" ), +PINCTRL_PIN (162 ,"GPIO_162" ), +PINCTRL_PIN (163 ,"GPIO_163" ), +PINCTRL_PIN (164 ,"GPIO_164" ), +PINCTRL_PIN (165 ,"GPIO_165" ), +PINCTRL_PIN (166 ,"GPIO_166" ), +PINCTRL_PIN (167 ,"GPIO_167" ), +PINCTRL_PIN (168 ,"GPIO_168" ), +PINCTRL_PIN (169 ,"GPIO_169" ), +PINCTRL_PIN (170 ,"GPIO_170" ), +PINCTRL_PIN (171 ,"GPIO_171" ), +PINCTRL_PIN (172 ,"GPIO_172" ), +PINCTRL_PIN (173 ,"GPIO_173" ), +PINCTRL_PIN (174 ,"GPIO_174" ), +PINCTRL_PIN (175 ,"UFS_RESET" ), +PINCTRL_PIN (176 ,"SDC2_CLK" ), +PINCTRL_PIN (177 ,"SDC2_CMD" ), +PINCTRL_PIN (178 ,"SDC2_DATA" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); +DECLARE_MSM_GPIO_PINS (114 ); +DECLARE_MSM_GPIO_PINS (115 ); +DECLARE_MSM_GPIO_PINS (116 ); +DECLARE_MSM_GPIO_PINS (117 ); +DECLARE_MSM_GPIO_PINS (118 ); +DECLARE_MSM_GPIO_PINS (119 ); +DECLARE_MSM_GPIO_PINS (120 ); +DECLARE_MSM_GPIO_PINS (121 ); +DECLARE_MSM_GPIO_PINS (122 ); +DECLARE_MSM_GPIO_PINS (123 ); +DECLARE_MSM_GPIO_PINS (124 ); +DECLARE_MSM_GPIO_PINS (125 ); +DECLARE_MSM_GPIO_PINS (126 ); +DECLARE_MSM_GPIO_PINS (127 ); +DECLARE_MSM_GPIO_PINS (128 ); +DECLARE_MSM_GPIO_PINS (129 ); +DECLARE_MSM_GPIO_PINS (130 ); +DECLARE_MSM_GPIO_PINS (131 ); +DECLARE_MSM_GPIO_PINS (132 ); +DECLARE_MSM_GPIO_PINS (133 ); +DECLARE_MSM_GPIO_PINS (134 ); +DECLARE_MSM_GPIO_PINS (135 ); +DECLARE_MSM_GPIO_PINS (136 ); +DECLARE_MSM_GPIO_PINS (137 ); +DECLARE_MSM_GPIO_PINS (138 ); +DECLARE_MSM_GPIO_PINS (139 ); +DECLARE_MSM_GPIO_PINS (140 ); +DECLARE_MSM_GPIO_PINS (141 ); +DECLARE_MSM_GPIO_PINS (142 ); +DECLARE_MSM_GPIO_PINS (143 ); +DECLARE_MSM_GPIO_PINS (144 ); +DECLARE_MSM_GPIO_PINS (145 ); +DECLARE_MSM_GPIO_PINS (146 ); +DECLARE_MSM_GPIO_PINS (147 ); +DECLARE_MSM_GPIO_PINS (148 ); +DECLARE_MSM_GPIO_PINS (149 ); +DECLARE_MSM_GPIO_PINS (150 ); +DECLARE_MSM_GPIO_PINS (151 ); +DECLARE_MSM_GPIO_PINS (152 ); +DECLARE_MSM_GPIO_PINS (153 ); +DECLARE_MSM_GPIO_PINS (154 ); +DECLARE_MSM_GPIO_PINS (155 ); +DECLARE_MSM_GPIO_PINS (156 ); +DECLARE_MSM_GPIO_PINS (157 ); +DECLARE_MSM_GPIO_PINS (158 ); +DECLARE_MSM_GPIO_PINS (159 ); +DECLARE_MSM_GPIO_PINS (160 ); +DECLARE_MSM_GPIO_PINS (161 ); +DECLARE_MSM_GPIO_PINS (162 ); +DECLARE_MSM_GPIO_PINS (163 ); +DECLARE_MSM_GPIO_PINS (164 ); +DECLARE_MSM_GPIO_PINS (165 ); +DECLARE_MSM_GPIO_PINS (166 ); +DECLARE_MSM_GPIO_PINS (167 ); +DECLARE_MSM_GPIO_PINS (168 ); +DECLARE_MSM_GPIO_PINS (169 ); +DECLARE_MSM_GPIO_PINS (170 ); +DECLARE_MSM_GPIO_PINS (171 ); +DECLARE_MSM_GPIO_PINS (172 ); +DECLARE_MSM_GPIO_PINS (173 ); +DECLARE_MSM_GPIO_PINS (174 ); + +static const unsigned int ufs_reset_pins[] = {175 }; +static const unsigned int sdc2_clk_pins[] = {176 }; +static const unsigned int sdc2_cmd_pins[] = {177 }; +static const unsigned int sdc2_data_pins[] = {178 }; + +enum sm8150_functions { + msm_mux_adsp_ext, + msm_mux_agera_pll, + msm_mux_aoss_cti, + msm_mux_atest_char, + msm_mux_atest_char0, + msm_mux_atest_char1, + msm_mux_atest_char2, + msm_mux_atest_char3, + msm_mux_atest_usb1, + msm_mux_atest_usb2, + msm_mux_atest_usb10, + msm_mux_atest_usb11, + msm_mux_atest_usb12, + msm_mux_atest_usb13, + msm_mux_atest_usb20, + msm_mux_atest_usb21, + msm_mux_atest_usb22, + msm_mux_atest_usb23, + msm_mux_audio_ref, + msm_mux_btfm_slimbus, + msm_mux_cam_mclk, + msm_mux_cci_async, + msm_mux_cci_i2c, + msm_mux_cci_timer0, + msm_mux_cci_timer1, + msm_mux_cci_timer2, + msm_mux_cci_timer3, + msm_mux_cci_timer4, + msm_mux_cri_trng, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_dbg_out, + msm_mux_ddr_bist, + msm_mux_ddr_pxi0, + msm_mux_ddr_pxi1, + msm_mux_ddr_pxi2, + msm_mux_ddr_pxi3, + msm_mux_edp_hot, + msm_mux_edp_lcd, + msm_mux_emac_phy, + msm_mux_emac_pps, + msm_mux_gcc_gp1, + msm_mux_gcc_gp2, + msm_mux_gcc_gp3, + msm_mux_gpio, + msm_mux_jitter_bist, + msm_mux_hs1_mi2s, + msm_mux_hs2_mi2s, + msm_mux_hs3_mi2s, + msm_mux_lpass_slimbus, + msm_mux_mdp_vsync, + msm_mux_mdp_vsync0, + msm_mux_mdp_vsync1, + msm_mux_mdp_vsync2, + msm_mux_mdp_vsync3, + msm_mux_mss_lte, + msm_mux_m_voc, + msm_mux_nav_pps, + msm_mux_pa_indicator, + msm_mux_pci_e0, + msm_mux_pci_e1, + msm_mux_phase_flag, + msm_mux_pll_bist, + msm_mux_pll_bypassnl, + msm_mux_pll_reset, + msm_mux_pri_mi2s, + msm_mux_pri_mi2s_ws, + msm_mux_prng_rosc, + msm_mux_qdss, + msm_mux_qdss_cti, + msm_mux_qlink_enable, + msm_mux_qlink_request, + msm_mux_qspi0, + msm_mux_qspi1, + msm_mux_qspi2, + msm_mux_qspi3, + msm_mux_qspi_clk, + msm_mux_qspi_cs, + msm_mux_qua_mi2s, + msm_mux_qup0, + msm_mux_qup1, + msm_mux_qup2, + msm_mux_qup3, + msm_mux_qup4, + msm_mux_qup5, + msm_mux_qup6, + msm_mux_qup7, + msm_mux_qup8, + msm_mux_qup9, + msm_mux_qup10, + msm_mux_qup11, + msm_mux_qup12, + msm_mux_qup13, + msm_mux_qup14, + msm_mux_qup15, + msm_mux_qup16, + msm_mux_qup17, + msm_mux_qup18, + msm_mux_qup19, + msm_mux_qup_l4, + msm_mux_qup_l5, + msm_mux_qup_l6, + msm_mux_rgmii, + msm_mux_sdc4, + msm_mux_sd_write, + msm_mux_sec_mi2s, + msm_mux_spkr_i2s, + msm_mux_sp_cmu, + msm_mux_ter_mi2s, + msm_mux_tgu_ch0, + msm_mux_tgu_ch2, + msm_mux_tgu_ch1, + msm_mux_tgu_ch3, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_tsif1, + msm_mux_tsif2, + msm_mux_uim1, + msm_mux_uim2, + msm_mux_uim_batt, + msm_mux_usb2phy_ac, + msm_mux_usb_phy, + msm_mux_vfr_1, + msm_mux_vsense_trigger, + msm_mux_wlan1_adc1, + msm_mux_wlan1_adc0, + msm_mux_wlan2_adc1, + msm_mux_wlan2_adc0, + msm_mux_wmss_reset, + msm_mux__, +}; + +static const char *const phase_flag_groups[] = { +"gpio18" ,"gpio19" ,"gpio20" ,"gpio55" ,"gpio56" , +"gpio57" ,"gpio59" ,"gpio64" ,"gpio68" ,"gpio76" , +"gpio79" ,"gpio80" ,"gpio90" ,"gpio91" ,"gpio92" , +"gpio93" ,"gpio94" ,"gpio96" ,"gpio114" ,"gpio115" , +"gpio116" ,"gpio117" ,"gpio118" ,"gpio119" ,"gpio120" , +"gpio121" ,"gpio122" ,"gpio126" ,"gpio127" ,"gpio128" , +"gpio144" ,"gpio145" , +}; + +static const char *const emac_pps_groups[] = { +"gpio81" , +}; + +static const char *const qup12_groups[] = { +"gpio83" ,"gpio84" ,"gpio85" ,"gpio86" , +}; + +static const char *const qup16_groups[] = { +"gpio83" ,"gpio84" ,"gpio85" ,"gpio86" , +}; + +static const char *const tsif1_groups[] = { +"gpio88" ,"gpio89" ,"gpio90" ,"gpio91" ,"gpio97" , +}; + +static const char *const qup8_groups[] = { +"gpio88" ,"gpio89" ,"gpio90" ,"gpio91" , +}; + +static const char *const qspi_cs_groups[] = { +"gpio88" ,"gpio94" , +}; + +static const char *const tgu_ch3_groups[] = { +"gpio88" , +}; + +static const char *const qspi0_groups[] = { +"gpio89" , +}; + +static const char *const mdp_vsync0_groups[] = { +"gpio89" , +}; + +static const char *const mdp_vsync1_groups[] = { +"gpio89" , +}; + +static const char *const mdp_vsync2_groups[] = { +"gpio89" , +}; + +static const char *const mdp_vsync3_groups[] = { +"gpio89" , +}; + +static const char *const tgu_ch0_groups[] = { +"gpio89" , +}; + +static const char *const qspi1_groups[] = { +"gpio90" , +}; + +static const char *const sdc4_groups[] = { +"gpio90" ,"gpio91" ,"gpio92" ,"gpio93" ,"gpio94" ,"gpio95" , +}; + +static const char *const tgu_ch1_groups[] = { +"gpio90" , +}; + +static const char *const wlan1_adc1_groups[] = { +"gpio90" , +}; + +static const char *const qspi2_groups[] = { +"gpio91" , +}; + +static const char *const vfr_1_groups[] = { +"gpio91" , +}; + +static const char *const tgu_ch2_groups[] = { +"gpio91" , +}; + +static const char *const wlan1_adc0_groups[] = { +"gpio91" , +}; + +static const char *const tsif2_groups[] = { +"gpio92" ,"gpio93" ,"gpio94" ,"gpio95" ,"gpio96" , +}; + +static const char *const qup11_groups[] = { +"gpio92" ,"gpio93" ,"gpio94" ,"gpio95" , +}; + +static const char *const qspi_clk_groups[] = { +"gpio92" , +}; + +static const char *const wlan2_adc1_groups[] = { +"gpio92" , +}; + +static const char *const qspi3_groups[] = { +"gpio93" , +}; + +static const char *const wlan2_adc0_groups[] = { +"gpio93" , +}; + +static const char *const sd_write_groups[] = { +"gpio97" , +}; + +static const char *const qup7_groups[] = { +"gpio98" ,"gpio99" ,"gpio100" ,"gpio101" , +}; + +static const char *const ddr_bist_groups[] = { +"gpio98" ,"gpio99" ,"gpio145" ,"gpio146" , +}; + +static const char *const ddr_pxi3_groups[] = { +"gpio98" ,"gpio101" , +}; + +static const char *const atest_usb13_groups[] = { +"gpio99" , +}; + +static const char *const ddr_pxi1_groups[] = { +"gpio99" ,"gpio100" , +}; + +static const char *const pll_bypassnl_groups[] = { +"gpio100" , +}; + +static const char *const atest_usb12_groups[] = { +"gpio100" , +}; + +static const char *const pll_reset_groups[] = { +"gpio101" , +}; + +static const char *const pci_e1_groups[] = { +"gpio102" ,"gpio103" , +}; + +static const char *const uim2_groups[] = { +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" , +}; + +static const char *const uim1_groups[] = { +"gpio109" ,"gpio110" ,"gpio111" ,"gpio112" , +}; + +static const char *const uim_batt_groups[] = { +"gpio113" , +}; + +static const char *const usb2phy_ac_groups[] = { +"gpio113" ,"gpio123" , +}; + +static const char *const aoss_cti_groups[] = { +"gpio113" , +}; + +static const char *const qup1_groups[] = { +"gpio114" ,"gpio115" ,"gpio116" ,"gpio117" , +}; + +static const char *const rgmii_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" ,"gpio59" , +"gpio114" ,"gpio115" ,"gpio116" ,"gpio117" , +"gpio118" ,"gpio119" ,"gpio120" ,"gpio121" ,"gpio122" , +}; + +static const char *const adsp_ext_groups[] = { +"gpio115" , +}; + +static const char *const qup5_groups[] = { +"gpio119" ,"gpio120" ,"gpio121" ,"gpio122" , +}; + +static const char *const atest_usb22_groups[] = { +"gpio123" , +}; + +static const char *const emac_phy_groups[] = { +"gpio124" , +}; + +static const char *const hs3_mi2s_groups[] = { +"gpio125" ,"gpio165" ,"gpio166" ,"gpio167" ,"gpio168" , +}; + +static const char *const sec_mi2s_groups[] = { +"gpio126" ,"gpio127" ,"gpio128" ,"gpio129" ,"gpio130" , +}; + +static const char *const qup2_groups[] = { +"gpio126" ,"gpio127" ,"gpio128" ,"gpio129" , +}; + +static const char *const jitter_bist_groups[] = { +"gpio129" , +}; + +static const char *const atest_usb21_groups[] = { +"gpio129" , +}; + +static const char *const pll_bist_groups[] = { +"gpio130" , +}; + +static const char *const atest_usb20_groups[] = { +"gpio130" , +}; + +static const char *const atest_char0_groups[] = { +"gpio130" , +}; + +static const char *const ter_mi2s_groups[] = { +"gpio131" ,"gpio132" ,"gpio133" ,"gpio134" ,"gpio135" , +}; + +static const char *const gcc_gp1_groups[] = { +"gpio131" ,"gpio136" , +}; + +static const char *const atest_char1_groups[] = { +"gpio133" , +}; + +static const char *const atest_char2_groups[] = { +"gpio134" , +}; + +static const char *const atest_char3_groups[] = { +"gpio135" , +}; + +static const char *const qua_mi2s_groups[] = { +"gpio136" ,"gpio137" ,"gpio138" ,"gpio139" ,"gpio140" ,"gpio141" , +"gpio142" , +}; + +static const char *const pri_mi2s_groups[] = { +"gpio143" ,"gpio144" ,"gpio146" ,"gpio147" , +}; + +static const char *const qup3_groups[] = { +"gpio144" ,"gpio145" ,"gpio146" ,"gpio147" , +}; + +static const char *const ddr_pxi0_groups[] = { +"gpio144" ,"gpio145" , +}; + +static const char *const pri_mi2s_ws_groups[] = { +"gpio145" , +}; + +static const char *const vsense_trigger_groups[] = { +"gpio145" , +}; + +static const char *const atest_usb1_groups[] = { +"gpio145" , +}; + +static const char *const atest_usb11_groups[] = { +"gpio146" , +}; + +static const char *const ddr_pxi2_groups[] = { +"gpio146" ,"gpio147" , +}; + +static const char *const dbg_out_groups[] = { +"gpio147" , +}; + +static const char *const atest_usb10_groups[] = { +"gpio147" , +}; + +static const char *const spkr_i2s_groups[] = { +"gpio148" ,"gpio149" ,"gpio150" ,"gpio151" ,"gpio152" , +}; + +static const char *const audio_ref_groups[] = { +"gpio148" , +}; + +static const char *const lpass_slimbus_groups[] = { +"gpio149" ,"gpio150" ,"gpio151" ,"gpio152" , +}; + +static const char *const tsense_pwm1_groups[] = { +"gpio150" , +}; + +static const char *const tsense_pwm2_groups[] = { +"gpio150" , +}; + +static const char *const btfm_slimbus_groups[] = { +"gpio153" ,"gpio154" , +}; + +static const char *const hs1_mi2s_groups[] = { +"gpio155" ,"gpio156" ,"gpio157" ,"gpio158" ,"gpio159" , +}; + +static const char *const cri_trng0_groups[] = { +"gpio159" , +}; + +static const char *const hs2_mi2s_groups[] = { +"gpio160" ,"gpio161" ,"gpio162" ,"gpio163" ,"gpio164" , +}; + +static const char *const cri_trng1_groups[] = { +"gpio160" , +}; + +static const char *const cri_trng_groups[] = { +"gpio161" , +}; + +static const char *const sp_cmu_groups[] = { +"gpio162" , +}; + +static const char *const prng_rosc_groups[] = { +"gpio163" , +}; + +static const char *const qup0_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; + +static const char *const gpio_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" , +"gpio22" ,"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio28" , +"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +"gpio43" ,"gpio44" ,"gpio45" ,"gpio46" ,"gpio47" ,"gpio48" ,"gpio49" , +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" ,"gpio54" ,"gpio55" ,"gpio56" , +"gpio57" ,"gpio58" ,"gpio59" ,"gpio60" ,"gpio61" ,"gpio62" ,"gpio63" , +"gpio64" ,"gpio65" ,"gpio66" ,"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" , +"gpio71" ,"gpio72" ,"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" ,"gpio77" , +"gpio78" ,"gpio79" ,"gpio80" ,"gpio81" ,"gpio82" ,"gpio83" ,"gpio84" , +"gpio85" ,"gpio86" ,"gpio87" ,"gpio88" ,"gpio89" ,"gpio90" ,"gpio91" , +"gpio92" ,"gpio93" ,"gpio94" ,"gpio95" ,"gpio96" ,"gpio97" ,"gpio98" , +"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , +"gpio111" ,"gpio112" ,"gpio113" ,"gpio114" ,"gpio115" ,"gpio116" , +"gpio117" ,"gpio118" ,"gpio119" ,"gpio120" ,"gpio121" ,"gpio122" , +"gpio123" ,"gpio124" ,"gpio125" ,"gpio126" ,"gpio127" ,"gpio128" , +"gpio129" ,"gpio130" ,"gpio131" ,"gpio132" ,"gpio133" ,"gpio134" , +"gpio135" ,"gpio136" ,"gpio137" ,"gpio138" ,"gpio139" ,"gpio140" , +"gpio141" ,"gpio142" ,"gpio143" ,"gpio144" ,"gpio145" ,"gpio146" , +"gpio147" ,"gpio148" ,"gpio149" ,"gpio150" ,"gpio151" ,"gpio152" , +"gpio153" ,"gpio154" ,"gpio155" ,"gpio156" ,"gpio157" ,"gpio158" , +"gpio159" ,"gpio160" ,"gpio161" ,"gpio162" ,"gpio163" ,"gpio164" , +"gpio165" ,"gpio166" ,"gpio167" ,"gpio168" ,"gpio169" ,"gpio170" , +"gpio171" ,"gpio172" ,"gpio173" ,"gpio174" , +}; + +static const char *const qup6_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; + +static const char *const qup_l6_groups[] = { +"gpio6" ,"gpio34" ,"gpio97" ,"gpio123" , +}; + +static const char *const qup_l5_groups[] = { +"gpio7" ,"gpio33" ,"gpio82" ,"gpio96" , +}; + +static const char *const mdp_vsync_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio81" ,"gpio82" , +}; + +static const char *const edp_lcd_groups[] = { +"gpio9" , +}; + +static const char *const qup10_groups[] = { +"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" , +}; + +static const char *const m_voc_groups[] = { +"gpio10" , +}; + +static const char *const edp_hot_groups[] = { +"gpio10" , +}; + +static const char *const cam_mclk_groups[] = { +"gpio13" ,"gpio14" ,"gpio15" ,"gpio16" , +}; + +static const char *const qdss_groups[] = { +"gpio13" ,"gpio14" ,"gpio15" ,"gpio16" ,"gpio17" , +"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" ,"gpio22" , +"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" , +"gpio28" ,"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" , +"gpio33" ,"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +"gpio47" ,"gpio48" ,"gpio83" ,"gpio117" ,"gpio118" , +"gpio119" ,"gpio120" ,"gpio121" ,"gpio132" , +"gpio133" ,"gpio134" , +}; + +static const char *const cci_i2c_groups[] = { +"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio31" ,"gpio32" ,"gpio33" , +"gpio34" , +}; + +static const char *const cci_timer0_groups[] = { +"gpio21" , +}; + +static const char *const gcc_gp2_groups[] = { +"gpio21" ,"gpio137" , +}; + +static const char *const cci_timer1_groups[] = { +"gpio22" , +}; + +static const char *const gcc_gp3_groups[] = { +"gpio22" ,"gpio138" , +}; + +static const char *const cci_timer2_groups[] = { +"gpio23" , +}; + +static const char *const qup18_groups[] = { +"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" , +}; + +static const char *const cci_timer3_groups[] = { +"gpio24" , +}; + +static const char *const cci_async_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" , +}; + +static const char *const cci_timer4_groups[] = { +"gpio25" , +}; + +static const char *const qup15_groups[] = { +"gpio27" ,"gpio28" ,"gpio29" ,"gpio30" , +}; + +static const char *const pci_e0_groups[] = { +"gpio35" ,"gpio36" , +}; + +static const char *const qup_l4_groups[] = { +"gpio37" ,"gpio59" ,"gpio81" ,"gpio95" , +}; + +static const char *const agera_pll_groups[] = { +"gpio37" , +}; + +static const char *const usb_phy_groups[] = { +"gpio38" , +}; + +static const char *const qup9_groups[] = { +"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +}; + +static const char *const qup13_groups[] = { +"gpio43" ,"gpio44" ,"gpio45" ,"gpio46" , +}; + +static const char *const qdss_cti_groups[] = { +"gpio45" ,"gpio46" ,"gpio49" ,"gpio50" ,"gpio56" ,"gpio57" ,"gpio58" , +"gpio58" , +}; + +static const char *const qup14_groups[] = { +"gpio47" ,"gpio48" ,"gpio49" ,"gpio50" , +}; + +static const char *const qup4_groups[] = { +"gpio51" ,"gpio52" ,"gpio53" ,"gpio54" , +}; + +static const char *const qup17_groups[] = { +"gpio55" ,"gpio56" ,"gpio57" ,"gpio58" , +}; + +static const char *const qup19_groups[] = { +"gpio55" ,"gpio56" ,"gpio57" ,"gpio58" , +}; + +static const char *const atest_char_groups[] = { +"gpio59" , +}; + +static const char *const nav_pps_groups[] = { +"gpio60" ,"gpio60" ,"gpio76" ,"gpio76" ,"gpio77" ,"gpio77" ,"gpio81" , +"gpio81" ,"gpio82" ,"gpio82" , +}; + +static const char *const atest_usb2_groups[] = { +"gpio60" , +}; + +static const char *const qlink_request_groups[] = { +"gpio61" , +}; + +static const char *const qlink_enable_groups[] = { +"gpio62" , +}; + +static const char *const wmss_reset_groups[] = { +"gpio63" , +}; + +static const char *const atest_usb23_groups[] = { +"gpio63" , +}; + +static const char *const pa_indicator_groups[] = { +"gpio68" , +}; + +static const char *const mss_lte_groups[] = { +"gpio69" ,"gpio70" , +}; + +static const struct msm_function sm8150_functions[] = { +FUNCTION (adsp_ext), +FUNCTION (agera_pll), +FUNCTION (aoss_cti), +FUNCTION (ddr_pxi2), +FUNCTION (atest_char), +FUNCTION (atest_char0), +FUNCTION (atest_char1), +FUNCTION (atest_char2), +FUNCTION (atest_char3), +FUNCTION (audio_ref), +FUNCTION (atest_usb1), +FUNCTION (atest_usb2), +FUNCTION (atest_usb10), +FUNCTION (atest_usb11), +FUNCTION (atest_usb12), +FUNCTION (atest_usb13), +FUNCTION (atest_usb20), +FUNCTION (atest_usb21), +FUNCTION (atest_usb22), +FUNCTION (atest_usb23), +FUNCTION (btfm_slimbus), +FUNCTION (cam_mclk), +FUNCTION (cci_async), +FUNCTION (cci_i2c), +FUNCTION (cci_timer0), +FUNCTION (cci_timer1), +FUNCTION (cci_timer2), +FUNCTION (cci_timer3), +FUNCTION (cci_timer4), +FUNCTION (cri_trng), +FUNCTION (cri_trng0), +FUNCTION (cri_trng1), +FUNCTION (dbg_out), +FUNCTION (ddr_bist), +FUNCTION (ddr_pxi0), +FUNCTION (ddr_pxi1), +FUNCTION (ddr_pxi3), +FUNCTION (edp_hot), +FUNCTION (edp_lcd), +FUNCTION (emac_phy), +FUNCTION (emac_pps), +FUNCTION (gcc_gp1), +FUNCTION (gcc_gp2), +FUNCTION (gcc_gp3), +FUNCTION (gpio), +FUNCTION (hs1_mi2s), +FUNCTION (hs2_mi2s), +FUNCTION (hs3_mi2s), +FUNCTION (jitter_bist), +FUNCTION (lpass_slimbus), +FUNCTION (mdp_vsync), +FUNCTION (mdp_vsync0), +FUNCTION (mdp_vsync1), +FUNCTION (mdp_vsync2), +FUNCTION (mdp_vsync3), +FUNCTION (mss_lte), +FUNCTION (m_voc), +FUNCTION (nav_pps), +FUNCTION (pa_indicator), +FUNCTION (pci_e0), +FUNCTION (phase_flag), +FUNCTION (pll_bypassnl), +FUNCTION (pll_bist), +FUNCTION (pci_e1), +FUNCTION (pll_reset), +FUNCTION (pri_mi2s), +FUNCTION (pri_mi2s_ws), +FUNCTION (prng_rosc), +FUNCTION (qdss), +FUNCTION (qdss_cti), +FUNCTION (qlink_request), +FUNCTION (qlink_enable), +FUNCTION (qspi0), +FUNCTION (qspi1), +FUNCTION (qspi2), +FUNCTION (qspi3), +FUNCTION (qspi_clk), +FUNCTION (qspi_cs), +FUNCTION (qua_mi2s), +FUNCTION (qup0), +FUNCTION (qup1), +FUNCTION (qup2), +FUNCTION (qup3), +FUNCTION (qup4), +FUNCTION (qup5), +FUNCTION (qup6), +FUNCTION (qup7), +FUNCTION (qup8), +FUNCTION (qup9), +FUNCTION (qup10), +FUNCTION (qup11), +FUNCTION (qup12), +FUNCTION (qup13), +FUNCTION (qup14), +FUNCTION (qup15), +FUNCTION (qup16), +FUNCTION (qup17), +FUNCTION (qup18), +FUNCTION (qup19), +FUNCTION (qup_l4), +FUNCTION (qup_l5), +FUNCTION (qup_l6), +FUNCTION (rgmii), +FUNCTION (sdc4), +FUNCTION (sd_write), +FUNCTION (sec_mi2s), +FUNCTION (spkr_i2s), +FUNCTION (sp_cmu), +FUNCTION (ter_mi2s), +FUNCTION (tgu_ch0), +FUNCTION (tgu_ch1), +FUNCTION (tgu_ch2), +FUNCTION (tgu_ch3), +FUNCTION (tsense_pwm1), +FUNCTION (tsense_pwm2), +FUNCTION (tsif1), +FUNCTION (tsif2), +FUNCTION (uim1), +FUNCTION (uim2), +FUNCTION (uim_batt), +FUNCTION (usb2phy_ac), +FUNCTION (usb_phy), +FUNCTION (vfr_1), +FUNCTION (vsense_trigger), +FUNCTION (wlan1_adc0), +FUNCTION (wlan1_adc1), +FUNCTION (wlan2_adc0), +FUNCTION (wlan2_adc1), +FUNCTION (wmss_reset), +}; + +/* +* Every pin is maintained as a single group, and missing or non-existing pin +* would be maintained as dummy group to synchronize pin group index with +* pin descriptor registered with pinctrl core. +* Clients would not be able to request these dummy pin groups. +*/ +static const struct msm_pingroup sm8150_groups[] = { + [0 ] =PINGROUP (0 ,SOUTH , qup0, _, _, _, _, _, _, _, _), + [1 ] =PINGROUP (1 ,SOUTH , qup0, _, _, _, _, _, _, _, _), + [2 ] =PINGROUP (2 ,SOUTH , qup0, _, _, _, _, _, _, _, _), + [3 ] =PINGROUP (3 ,SOUTH , qup0, _, _, _, _, _, _, _, _), + [4 ] =PINGROUP (4 ,SOUTH , qup6, rgmii, _, _, _, _, _, _, _), + [5 ] =PINGROUP (5 ,SOUTH , qup6, rgmii, _, _, _, _, _, _, _), + [6 ] =PINGROUP (6 ,SOUTH , qup6, rgmii, qup_l6, _, _, _, _, _, _), + [7 ] =PINGROUP (7 ,SOUTH , qup6, rgmii, qup_l5, _, _, _, _, _, _), + [8 ] =PINGROUP (8 ,NORTH , mdp_vsync, _, _, _, _, _, _, _, _), + [9 ] =PINGROUP (9 ,NORTH , mdp_vsync, edp_lcd, qup10, _, _, _, _, _, _), + [10 ] =PINGROUP (10 ,NORTH , mdp_vsync, m_voc, edp_hot, qup10, _, _, _, _, _), + [11 ] =PINGROUP (11 ,NORTH , qup10, _, _, _, _, _, _, _, _), + [12 ] =PINGROUP (12 ,NORTH , qup10, _, _, _, _, _, _, _, _), + [13 ] =PINGROUP (13 ,NORTH , cam_mclk, qdss, _, _, _, _, _, _, _), + [14 ] =PINGROUP (14 ,NORTH , cam_mclk, qdss, _, _, _, _, _, _, _), + [15 ] =PINGROUP (15 ,NORTH , cam_mclk, qdss, _, _, _, _, _, _, _), + [16 ] =PINGROUP (16 ,NORTH , cam_mclk, qdss, _, _, _, _, _, _, _), + [17 ] =PINGROUP (17 ,NORTH , cci_i2c, qdss, _, _, _, _, _, _, _), + [18 ] =PINGROUP (18 ,NORTH , cci_i2c, phase_flag, _, qdss, _, _, _, _, _), + [19 ] =PINGROUP (19 ,NORTH , cci_i2c, phase_flag, _, qdss, _, _, _, _, _), + [20 ] =PINGROUP (20 ,NORTH , cci_i2c, phase_flag, _, qdss, _, _, _, _, _), + [21 ] =PINGROUP (21 ,EAST , cci_timer0, gcc_gp2, qdss, _, _, _, _, _, _), + [22 ] =PINGROUP (22 ,EAST , cci_timer1, gcc_gp3, qdss, _, _, _, _, _, _), + [23 ] =PINGROUP (23 ,EAST , cci_timer2, qup18, qdss, _, _, _, _, _, _), + [24 ] =PINGROUP (24 ,EAST , cci_timer3, cci_async, qup18, qdss, _, _, _, _, _), + [25 ] =PINGROUP (25 ,EAST , cci_timer4, cci_async, qup18, qdss, _, _, _, _, _), + [26 ] =PINGROUP (26 ,EAST , cci_async, qup18, qdss, _, _, _, _, _, _), + [27 ] =PINGROUP (27 ,EAST , qup15, _, qdss, _, _, _, _, _, _), + [28 ] =PINGROUP (28 ,EAST , qup15, qdss, _, _, _, _, _, _, _), + [29 ] =PINGROUP (29 ,EAST , qup15, qdss, _, _, _, _, _, _, _), + [30 ] =PINGROUP (30 ,EAST , qup15, qdss, _, _, _, _, _, _, _), + [31 ] =PINGROUP (31 ,NORTH , cci_i2c, qdss, _, _, _, _, _, _, _), + [32 ] =PINGROUP (32 ,NORTH , cci_i2c, qdss, _, _, _, _, _, _, _), + [33 ] =PINGROUP (33 ,NORTH , cci_i2c, qup_l5, qdss, _, _, _, _, _, _), + [34 ] =PINGROUP (34 ,NORTH , cci_i2c, qup_l6, _, _, _, _, _, _, _), + [35 ] =PINGROUP (35 ,NORTH , pci_e0, _, _, _, _, _, _, _, _), + [36 ] =PINGROUP (36 ,NORTH , pci_e0, _, _, _, _, _, _, _, _), + [37 ] =PINGROUP (37 ,NORTH , qup_l4, agera_pll, _, _, _, _, _, _, _), + [38 ] =PINGROUP (38 ,SOUTH , usb_phy, _, _, _, _, _, _, _, _), + [39 ] =PINGROUP (39 ,NORTH , qup9, qdss, _, _, _, _, _, _, _), + [40 ] =PINGROUP (40 ,NORTH , qup9, qdss, _, _, _, _, _, _, _), + [41 ] =PINGROUP (41 ,NORTH , qup9, qdss, _, _, _, _, _, _, _), + [42 ] =PINGROUP (42 ,NORTH , qup9, qdss, _, _, _, _, _, _, _), + [43 ] =PINGROUP (43 ,EAST , qup13, _, _, _, _, _, _, _, _), + [44 ] =PINGROUP (44 ,EAST , qup13, _, _, _, _, _, _, _, _), + [45 ] =PINGROUP (45 ,EAST , qup13, qdss_cti, _, _, _, _, _, _, _), + [46 ] =PINGROUP (46 ,EAST , qup13, qdss_cti, _, _, _, _, _, _, _), + [47 ] =PINGROUP (47 ,EAST , qup14, qdss, _, _, _, _, _, _, _), + [48 ] =PINGROUP (48 ,EAST , qup14, qdss, _, _, _, _, _, _, _), + [49 ] =PINGROUP (49 ,EAST , qup14, _, qdss_cti, _, _, _, _, _, _), + [50 ] =PINGROUP (50 ,EAST , qup14, qdss_cti, _, _, _, _, _, _, _), + [51 ] =PINGROUP (51 ,SOUTH , qup4, _, _, _, _, _, _, _, _), + [52 ] =PINGROUP (52 ,SOUTH , qup4, _, _, _, _, _, _, _, _), + [53 ] =PINGROUP (53 ,SOUTH , qup4, _, _, _, _, _, _, _, _), + [54 ] =PINGROUP (54 ,SOUTH , qup4, _, _, _, _, _, _, _, _), + [55 ] =PINGROUP (55 ,SOUTH , qup17, qup19, phase_flag, _, _, _, _, _, _), + [56 ] =PINGROUP (56 ,SOUTH , qup17, qup19, qdss_cti, phase_flag, _, _, _, _, _), + [57 ] =PINGROUP (57 ,SOUTH , qup17, qup19, qdss_cti, phase_flag, _, _, _, _, _), + [58 ] =PINGROUP (58 ,SOUTH , qup17, qup19, qdss_cti, phase_flag, _, _, _, _, _), + [59 ] =PINGROUP (59 ,SOUTH , rgmii, qup_l4, phase_flag, _, atest_char, _, _, _, _), + [60 ] =PINGROUP (60 ,SOUTH , _, nav_pps, nav_pps, atest_usb2, _, _, _, _, _), + [61 ] =PINGROUP (61 ,SOUTH , qlink_request, _, _, _, _, _, _, _, _), + [62 ] =PINGROUP (62 ,SOUTH , qlink_enable, _, _, _, _, _, _, _, _), + [63 ] =PINGROUP (63 ,SOUTH , wmss_reset, atest_usb23, _, _, _, _, _, _, _), + [64 ] =PINGROUP (64 ,SOUTH , _, phase_flag, _, _, _, _, _, _, _), + [65 ] =PINGROUP (65 ,SOUTH , _, _, _, _, _, _, _, _, _), + [66 ] =PINGROUP (66 ,SOUTH , _, _, _, _, _, _, _, _, _), + [67 ] =PINGROUP (67 ,SOUTH , _, _, _, _, _, _, _, _, _), + [68 ] =PINGROUP (68 ,SOUTH , _, pa_indicator, phase_flag, _, _, _, _, _, _), + [69 ] =PINGROUP (69 ,SOUTH , mss_lte, _, _, _, _, _, _, _, _), + [70 ] =PINGROUP (70 ,SOUTH , mss_lte, _, _, _, _, _, _, _, _), + [71 ] =PINGROUP (71 ,SOUTH , _, _, _, _, _, _, _, _, _), + [72 ] =PINGROUP (72 ,SOUTH , _, _, _, _, _, _, _, _, _), + [73 ] =PINGROUP (73 ,SOUTH , _, _, _, _, _, _, _, _, _), + [74 ] =PINGROUP (74 ,SOUTH , _, _, _, _, _, _, _, _, _), + [75 ] =PINGROUP (75 ,SOUTH , _, _, _, _, _, _, _, _, _), + [76 ] =PINGROUP (76 ,SOUTH , _, _, _, nav_pps, nav_pps, phase_flag, _, _, _), + [77 ] =PINGROUP (77 ,SOUTH , _, _, _, nav_pps, nav_pps, _, _, _, _), + [78 ] =PINGROUP (78 ,SOUTH , _, _, _, _, _, _, _, _, _), + [79 ] =PINGROUP (79 ,SOUTH , _, _, phase_flag, _, _, _, _, _, _), + [80 ] =PINGROUP (80 ,SOUTH , _, _, phase_flag, _, _, _, _, _, _), + [81 ] =PINGROUP (81 ,SOUTH , _, _, _, nav_pps, nav_pps, qup_l4, mdp_vsync, emac_pps, _), + [82 ] =PINGROUP (82 ,SOUTH , _, _, _, nav_pps, nav_pps, qup_l5, mdp_vsync, _, _), + [83 ] =PINGROUP (83 ,NORTH , qup12, qup16, _, qdss, _, _, _, _, _), + [84 ] =PINGROUP (84 ,NORTH , qup12, qup16, _, _, _, _, _, _, _), + [85 ] =PINGROUP (85 ,NORTH , qup12, qup16, _, _, _, _, _, _, _), + [86 ] =PINGROUP (86 ,NORTH , qup12, qup16, _, _, _, _, _, _, _), + [87 ] =PINGROUP (87 ,EAST , _, _, _, _, _, _, _, _, _), + [88 ] =PINGROUP (88 ,NORTH , tsif1, qup8, qspi_cs, tgu_ch3, _, _, _, _, _), + [89 ] =PINGROUP (89 ,NORTH , tsif1, qup8, qspi0, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, tgu_ch0, _), + [90 ] =PINGROUP (90 ,NORTH , tsif1, qup8, qspi1, sdc4, phase_flag, tgu_ch1, _, _, wlan1_adc1), + [91 ] =PINGROUP (91 ,NORTH , tsif1, qup8, qspi2, sdc4, vfr_1, phase_flag, tgu_ch2, _, _), + [92 ] =PINGROUP (92 ,NORTH , tsif2, qup11, qspi_clk, sdc4, phase_flag, _, wlan2_adc1, _, _), + [93 ] =PINGROUP (93 ,NORTH , tsif2, qup11, qspi3, sdc4, phase_flag, _, wlan2_adc0, _, _), + [94 ] =PINGROUP (94 ,NORTH , tsif2, qup11, qspi_cs, sdc4, phase_flag, _, _, _, _), + [95 ] =PINGROUP (95 ,NORTH , tsif2, qup11, sdc4, qup_l4, _, _, _, _, _), + [96 ] =PINGROUP (96 ,NORTH , tsif2, qup_l5, phase_flag, _, _, _, _, _, _), + [97 ] =PINGROUP (97 ,NORTH , sd_write, tsif1, qup_l6, _, _, _, _, _, _), + [98 ] =PINGROUP (98 ,SOUTH , qup7, ddr_bist, ddr_pxi3, _, _, _, _, _, _), + [99 ] =PINGROUP (99 ,SOUTH , qup7, ddr_bist, atest_usb13, ddr_pxi1, _, _, _, _, _), + [100 ] =PINGROUP (100 ,SOUTH , qup7, pll_bypassnl, atest_usb12, ddr_pxi1, _, _, _, _, _), + [101 ] =PINGROUP (101 ,SOUTH , qup7, pll_reset, ddr_pxi3, _, _, _, _, _, _), + [102 ] =PINGROUP (102 ,NORTH , pci_e1, _, _, _, _, _, _, _, _), + [103 ] =PINGROUP (103 ,NORTH , pci_e1, _, _, _, _, _, _, _, _), + [104 ] =PINGROUP (104 ,NORTH , _, _, _, _, _, _, _, _, _), + [105 ] =PINGROUP (105 ,WEST , uim2, _, _, _, _, _, _, _, _), + [106 ] =PINGROUP (106 ,WEST , uim2, _, _, _, _, _, _, _, _), + [107 ] =PINGROUP (107 ,WEST , uim2, _, _, _, _, _, _, _, _), + [108 ] =PINGROUP (108 ,WEST , uim2, _, _, _, _, _, _, _, _), + [109 ] =PINGROUP (109 ,WEST , uim1, _, _, _, _, _, _, _, _), + [110 ] =PINGROUP (110 ,WEST , uim1, _, _, _, _, _, _, _, _), + [111 ] =PINGROUP (111 ,WEST , uim1, _, _, _, _, _, _, _, _), + [112 ] =PINGROUP (112 ,WEST , uim1, _, _, _, _, _, _, _, _), + [113 ] =PINGROUP (113 ,WEST , uim_batt, usb2phy_ac, aoss_cti, _, _, _, _, _, _), + [114 ] =PINGROUP (114 ,SOUTH , qup1, rgmii, phase_flag, _, _, _, _, _, _), + [115 ] =PINGROUP (115 ,SOUTH , qup1, rgmii, phase_flag, adsp_ext, _, _, _, _, _), + [116 ] =PINGROUP (116 ,SOUTH , qup1, rgmii, phase_flag, _, _, _, _, _, _), + [117 ] =PINGROUP (117 ,SOUTH , qup1, rgmii, phase_flag, _, qdss, _, _, _, _), + [118 ] =PINGROUP (118 ,SOUTH , rgmii, phase_flag, _, qdss, _, _, _, _, _), + [119 ] =PINGROUP (119 ,SOUTH , qup5, rgmii, phase_flag, _, qdss, _, _, _, _), + [120 ] =PINGROUP (120 ,SOUTH , qup5, rgmii, phase_flag, _, qdss, _, _, _, _), + [121 ] =PINGROUP (121 ,SOUTH , qup5, rgmii, phase_flag, _, qdss, _, _, _, _), + [122 ] =PINGROUP (122 ,SOUTH , qup5, rgmii, phase_flag, _, _, _, _, _, _), + [123 ] =PINGROUP (123 ,SOUTH , usb2phy_ac, qup_l6, atest_usb22, _, _, _, _, _, _), + [124 ] =PINGROUP (124 ,SOUTH , emac_phy, _, _, _, _, _, _, _, _), + [125 ] =PINGROUP (125 ,WEST , hs3_mi2s, _, _, _, _, _, _, _, _), + [126 ] =PINGROUP (126 ,SOUTH , sec_mi2s, qup2, phase_flag, _, _, _, _, _, _), + [127 ] =PINGROUP (127 ,SOUTH , sec_mi2s, qup2, phase_flag, _, _, _, _, _, _), + [128 ] =PINGROUP (128 ,SOUTH , sec_mi2s, qup2, phase_flag, _, _, _, _, _, _), + [129 ] =PINGROUP (129 ,SOUTH , sec_mi2s, qup2, jitter_bist, atest_usb21, _, _, _, _, _), + [130 ] =PINGROUP (130 ,SOUTH , sec_mi2s, pll_bist, atest_usb20, atest_char0, _, _, _, _, _), + [131 ] =PINGROUP (131 ,SOUTH , ter_mi2s, gcc_gp1, _, _, _, _, _, _, _), + [132 ] =PINGROUP (132 ,SOUTH , ter_mi2s, _, qdss, _, _, _, _, _, _), + [133 ] =PINGROUP (133 ,SOUTH , ter_mi2s, qdss, atest_char1, _, _, _, _, _, _), + [134 ] =PINGROUP (134 ,SOUTH , ter_mi2s, qdss, atest_char2, _, _, _, _, _, _), + [135 ] =PINGROUP (135 ,SOUTH , ter_mi2s, atest_char3, _, _, _, _, _, _, _), + [136 ] =PINGROUP (136 ,SOUTH , qua_mi2s, gcc_gp1, _, _, _, _, _, _, _), + [137 ] =PINGROUP (137 ,SOUTH , qua_mi2s, gcc_gp2, _, _, _, _, _, _, _), + [138 ] =PINGROUP (138 ,SOUTH , qua_mi2s, gcc_gp3, _, _, _, _, _, _, _), + [139 ] =PINGROUP (139 ,SOUTH , qua_mi2s, _, _, _, _, _, _, _, _), + [140 ] =PINGROUP (140 ,SOUTH , qua_mi2s, _, _, _, _, _, _, _, _), + [141 ] =PINGROUP (141 ,SOUTH , qua_mi2s, _, _, _, _, _, _, _, _), + [142 ] =PINGROUP (142 ,SOUTH , qua_mi2s, _, _, _, _, _, _, _, _), + [143 ] =PINGROUP (143 ,SOUTH , pri_mi2s, _, _, _, _, _, _, _, _), + [144 ] =PINGROUP (144 ,SOUTH , pri_mi2s, qup3, phase_flag, _, ddr_pxi0, _, _, _, _), + [145 ] =PINGROUP (145 ,SOUTH , pri_mi2s_ws, qup3, phase_flag, ddr_bist, _, vsense_trigger, atest_usb1, ddr_pxi0, _), + [146 ] =PINGROUP (146 ,SOUTH , pri_mi2s, qup3, ddr_bist, atest_usb11, ddr_pxi2, _, _, _, _), + [147 ] =PINGROUP (147 ,SOUTH , pri_mi2s, qup3, dbg_out, atest_usb10, ddr_pxi2, _, _, _, _), + [148 ] =PINGROUP (148 ,SOUTH , spkr_i2s, audio_ref, _, _, _, _, _, _, _), + [149 ] =PINGROUP (149 ,SOUTH , lpass_slimbus, spkr_i2s, _, _, _, _, _, _, _), + [150 ] =PINGROUP (150 ,SOUTH , lpass_slimbus, spkr_i2s, tsense_pwm1, tsense_pwm2, _, _, _, _, _), + [151 ] =PINGROUP (151 ,SOUTH , lpass_slimbus, spkr_i2s, _, _, _, _, _, _, _), + [152 ] =PINGROUP (152 ,SOUTH , lpass_slimbus, spkr_i2s, _, _, _, _, _, _, _), + [153 ] =PINGROUP (153 ,SOUTH , btfm_slimbus, _, _, _, _, _, _, _, _), + [154 ] =PINGROUP (154 ,SOUTH , btfm_slimbus, _, _, _, _, _, _, _, _), + [155 ] =PINGROUP (155 ,WEST , hs1_mi2s, _, _, _, _, _, _, _, _), + [156 ] =PINGROUP (156 ,WEST , hs1_mi2s, _, _, _, _, _, _, _, _), + [157 ] =PINGROUP (157 ,WEST , hs1_mi2s, _, _, _, _, _, _, _, _), + [158 ] =PINGROUP (158 ,WEST , hs1_mi2s, _, _, _, _, _, _, _, _), + [159 ] =PINGROUP (159 ,WEST , hs1_mi2s, cri_trng0, _, _, _, _, _, _, _), + [160 ] =PINGROUP (160 ,WEST , hs2_mi2s, cri_trng1, _, _, _, _, _, _, _), + [161 ] =PINGROUP (161 ,WEST , hs2_mi2s, cri_trng, _, _, _, _, _, _, _), + [162 ] =PINGROUP (162 ,WEST , hs2_mi2s, sp_cmu, _, _, _, _, _, _, _), + [163 ] =PINGROUP (163 ,WEST , hs2_mi2s, prng_rosc, _, _, _, _, _, _, _), + [164 ] =PINGROUP (164 ,WEST , hs2_mi2s, _, _, _, _, _, _, _, _), + [165 ] =PINGROUP (165 ,WEST , hs3_mi2s, _, _, _, _, _, _, _, _), + [166 ] =PINGROUP (166 ,WEST , hs3_mi2s, _, _, _, _, _, _, _, _), + [167 ] =PINGROUP (167 ,WEST , hs3_mi2s, _, _, _, _, _, _, _, _), + [168 ] =PINGROUP (168 ,WEST , hs3_mi2s, _, _, _, _, _, _, _, _), + [169 ] =PINGROUP (169 ,NORTH , _, _, _, _, _, _, _, _, _), + [170 ] =PINGROUP (170 ,NORTH , _, _, _, _, _, _, _, _, _), + [171 ] =PINGROUP (171 ,NORTH , _, _, _, _, _, _, _, _, _), + [172 ] =PINGROUP (172 ,NORTH , _, _, _, _, _, _, _, _, _), + [173 ] =PINGROUP (173 ,NORTH , _, _, _, _, _, _, _, _, _), + [174 ] =PINGROUP (174 ,NORTH , _, _, _, _, _, _, _, _, _), + [175 ] =UFS_RESET (ufs_reset,0xB6000 ), + [176 ] =SDC_QDSD_PINGROUP (sdc2_clk,0xB2000 ,14 ,6 ), + [177 ] =SDC_QDSD_PINGROUP (sdc2_cmd,0xB2000 ,11 ,3 ), + [178 ] =SDC_QDSD_PINGROUP (sdc2_data,0xB2000 ,9 ,0 ), +}; + +static const struct msm_pinctrl_soc_data sm8150_pinctrl = { + .pins = sm8150_pins, + .npins =ARRAY_SIZE (sm8150_pins), + .functions = sm8150_functions, + .nfunctions =ARRAY_SIZE (sm8150_functions), + .groups = sm8150_groups, + .ngroups =ARRAY_SIZE (sm8150_groups), + .ngpios =176 , + .tiles = sm8150_tiles, + .ntiles =ARRAY_SIZE (sm8150_tiles), +}; + +static int sm8150_pinctrl_probe (struct platform_device *pdev) +{ +return msm_pinctrl_probe (pdev, &sm8150_pinctrl); +} + +static const struct of_device_id sm8150_pinctrl_of_match[] = { + { .compatible ="qcom,sm8150-pinctrl" , }, + { }, +}; + +static struct platform_driver sm8150_pinctrl_driver = { + .driver = { + .name ="sm8150-pinctrl" , + .of_match_table = sm8150_pinctrl_of_match, + }, + .probe = sm8150_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sm8150_pinctrl_init (void ) +{ +return platform_driver_register (&sm8150_pinctrl_driver); +} +arch_initcall (sm8150_pinctrl_init); + +static void __exit sm8150_pinctrl_exit(void) +{ +platform_driver_unregister (&sm8150_pinctrl_driver); +} +module_exit (sm8150_pinctrl_exit); + +MODULE_DESCRIPTION ("QTI sm8150 pinctrl driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DEVICE_TABLE (of, sm8150_pinctrl_of_match);Signature · 1 line
2.20.1