Skip to contentSkip to conversation

nvme: fix multipath crash when ANA deactivated

PATCH Superseded Marta Rybczynska 3 participants 4 messages Jul 1, 2019 – Jul 2, 2019 NVMe

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 nvme: fix multipath crash when ANA deactivated

Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. When connecting the target, the driver in nvme_parse_ana_log then tries to access nvme_mpath_init.ctrl->ana_log_buf that is unallocated. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by Marta Rybczynska <marta.rybczynska at kalray.eu>
Tested-by Jean-Baptiste Riaux <jbriaux at kalray.eu>
---
 drivers/nvme/host/multipath.c | 12 ++++++++++--
 drivers/nvme/host/nvme.h      |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)
drivers/nvme/host/multipath.c +10 -2
index 499acf0..61dae87 100644
@@ -12,11 +12,16 @@
 MODULE_PARM_DESC(multipath,
 	"turn on native support for multiple controllers per subsystem");
 
-inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+inline bool nvme_ctrl_has_ana_cap(struct nvme_ctrl *ctrl)
 {
 	return multipath && ctrl->subsys && (ctrl->subsys->cmic & (1 << 3));
 }
 
+inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+{
+	return nvme_ctrl_has_ana_cap(ctrl) && ctrl->ana_enabled;
+}
+
 /*
  * If multipathing is enabled we need to always use the subsystem instance
  * number for numbering our devices to avoid conflicts between subsystems that
@@ -614,7 +619,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 {
 	int error;
 
-	if (!nvme_ctrl_use_ana(ctrl))
+	if (!nvme_ctrl_has_ana_cap(ctrl))
 		return 0;
 
 	ctrl->anacap = id->anacap;
@@ -647,6 +652,8 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 	error = nvme_read_ana_log(ctrl, true);
 	if (error)
 		goto out_free_ana_log_buf;
+
+	ctrl->ana_enabled = true;
 	return 0;
 out_free_ana_log_buf:
 	kfree(ctrl->ana_log_buf);
@@ -659,5 +666,6 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
 {
 	kfree(ctrl->ana_log_buf);
 	ctrl->ana_log_buf = NULL;
+	ctrl->ana_enabled = false;
 }
 
drivers/nvme/host/nvme.h +1 -0
index 55553d2..8daefeb 100644
@@ -219,6 +219,7 @@ struct nvme_ctrl {
 	u8 anatt;
 	u32 anagrpmax;
 	u32 nanagrpid;
+	bool ana_enabled;
 	struct mutex ana_lock;
 	struct nvme_ana_rsp_hdr *ana_log_buf;
 	size_t ana_log_size;
Signature · 1 line
1.8.3.1
#1 lore raw
Quoted 122 lines · Marta Rybczynska

Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. When connecting the target, the driver in nvme_parse_ana_log then tries to access nvme_mpath_init.ctrl->ana_log_buf that is unallocated. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by Marta Rybczynska <marta.rybczynska at kalray.eu>
Tested-by Jean-Baptiste Riaux <jbriaux at kalray.eu>
---
 drivers/nvme/host/multipath.c | 12 ++++++++++--
 drivers/nvme/host/nvme.h      |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)
drivers/nvme/host/multipath.c +10 -2
index 499acf0..61dae87 100644
@@ -12,11 +12,16 @@
 MODULE_PARM_DESC(multipath,
 	"turn on native support for multiple controllers per subsystem");
 
-inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+inline bool nvme_ctrl_has_ana_cap(struct nvme_ctrl *ctrl)
 {
 	return multipath && ctrl->subsys && (ctrl->subsys->cmic & (1 << 3));
 }
 
+inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+{
+	return nvme_ctrl_has_ana_cap(ctrl) && ctrl->ana_enabled;
+}
+
 /*
  * If multipathing is enabled we need to always use the subsystem instance
  * number for numbering our devices to avoid conflicts between subsystems that
@@ -614,7 +619,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 {
 	int error;
 
-	if (!nvme_ctrl_use_ana(ctrl))
+	if (!nvme_ctrl_has_ana_cap(ctrl))
 		return 0;
 
 	ctrl->anacap = id->anacap;
@@ -647,6 +652,8 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 	error = nvme_read_ana_log(ctrl, true);
 	if (error)
 		goto out_free_ana_log_buf;
+
+	ctrl->ana_enabled = true;
 	return 0;
 out_free_ana_log_buf:
 	kfree(ctrl->ana_log_buf);
@@ -659,5 +666,6 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
 {
 	kfree(ctrl->ana_log_buf);
 	ctrl->ana_log_buf = NULL;
+	ctrl->ana_enabled = false;
 }
 
drivers/nvme/host/nvme.h +0 -0
index 55553d2..8daefeb 100644

drivers/nvme/host/nvme.h struct nvme_ctrl { · line 225

Quoted 7 lines
drivers/nvme/host/nvme.h +1 -0
@@ -219,6 +219,7 @@ struct nvme_ctrl {
 	u8 anatt;
 	u32 anagrpmax;
 	u32 nanagrpid;
+	bool ana_enabled;
 	struct mutex ana_lock;
 	struct nvme_ana_rsp_hdr *ana_log_buf;
 	size_t ana_log_size;

They idea was to use a 'ana_log_buf == NULL' as an indicator that ANA is disabled, so there is no need to have an additional flag.

Cheers,

Hannes

Signature · 5 lines
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare at suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 N?rnberg
GF: Felix Imend?rffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG N?rnberg)
#2 lore raw
Quoted 134 lines · ----- On 2 Jul, 2019,@11:31, Hannes Reinecke [email protected] wrote:
Quoted 133 lines · Marta Rybczynska

Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. When connecting the target, the driver in nvme_parse_ana_log then tries to access nvme_mpath_init.ctrl->ana_log_buf that is unallocated. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55
41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08
00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000)
knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core

nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio

[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55
41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08
00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000)
knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by Marta Rybczynska <marta.rybczynska at kalray.eu>
Tested-by Jean-Baptiste Riaux <jbriaux at kalray.eu>
---
 drivers/nvme/host/multipath.c | 12 ++++++++++--
 drivers/nvme/host/nvme.h      |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)
drivers/nvme/host/multipath.c +7 -2
index 499acf0..61dae87 100644
@@ -12,11 +12,16 @@
 MODULE_PARM_DESC(multipath,
 	"turn on native support for multiple controllers per subsystem");
 
-inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+inline bool nvme_ctrl_has_ana_cap(struct nvme_ctrl *ctrl)
 {
 	return multipath && ctrl->subsys && (ctrl->subsys->cmic & (1 << 3));
 }
 
+inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+{
+	return nvme_ctrl_has_ana_cap(ctrl) && ctrl->ana_enabled;
+}
+
 /*
  * If multipathing is enabled we need to always use the subsystem instance
  * number for numbering our devices to avoid conflicts between subsystems that
@@ -614,7 +619,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct
 nvme_id_ctrl *id)
 {
 	int error;
 
-	if (!nvme_ctrl_use_ana(ctrl))
+	if (!nvme_ctrl_has_ana_cap(ctrl))
 		return 0;
 
drivers/nvme/host/multipath.c +2 -0
 	ctrl->anacap = id->anacap;
@@ -647,6 +652,8 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct
 nvme_id_ctrl *id)
 	error = nvme_read_ana_log(ctrl, true);
 	if (error)
 		goto out_free_ana_log_buf;
+
+	ctrl->ana_enabled = true;
 	return 0;
 out_free_ana_log_buf:
drivers/nvme/host/multipath.c +1 -0
 	kfree(ctrl->ana_log_buf);
@@ -659,5 +666,6 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
 {
 	kfree(ctrl->ana_log_buf);
 	ctrl->ana_log_buf = NULL;
+	ctrl->ana_enabled = false;
 }
 
Quoted 15 lines

drivers/nvme/host/nvme.h struct nvme_ctrl { · line 225

Quoted 13 lines
drivers/nvme/host/nvme.h +1 -0
index 55553d2..8daefeb 100644
@@ -219,6 +219,7 @@ struct nvme_ctrl {
 	u8 anatt;
 	u32 anagrpmax;
 	u32 nanagrpid;
+	bool ana_enabled;
 	struct mutex ana_lock;
 	struct nvme_ana_rsp_hdr *ana_log_buf;
 	size_t ana_log_size;

They idea was to use a 'ana_log_buf == NULL' as an indicator that ANA is disabled, so there is no need to have an additional flag.

OK, still keeping the split of the helper functions?

Marta

#3 lore raw
Quoted 4 lines · Marta Rybczynska
Quoted 2 lines

They idea was to use a 'ana_log_buf == NULL' as an indicator that ANA is disabled, so there is no need to have an additional flag.

OK, still keeping the split of the helper functions?

I think we can simplify switch nvme_ctrl_use_ana to only check for ->ana_log_buf, and just opencode the actual capabilities check in the setup path.