Skip to contentSkip to conversation

nand: davinci: enable driver model for NAND

PATCH New Bartosz Golaszewski 3 participants 10 messages Jun 6, 2019 – Jul 3, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover nand: davinci: enable driver model for NAND

From: Bartosz Golaszewski <[email protected]>

This series enables the driver model for NAND on davinci da850 boards.

The first patch is a simple tweak for an unnecessarily exported function.

The second patch extends the NAND driver to support both legacy and driver-model users. For now we don't parse the device-tree as it's a bit complicated on da850, namely: the nand node is a child of the aemif node for which we don't have a driver in u-boot (unlike on linux where the aemif driver populates all its subnodes). In order for the nand device to be probed, we're adding a dummy node to the u-boot dts extensions with an appropriate compatible.

Two last patches enable driver model for NAND on da850-lcdk and da850-evm. We don't enable the driver model in SPL as first: the patches enabling CONFIG_SPL_DM are still waiting to be merged, and second: the nand_spl_simple driver used by davinci SPL doesn't support driver model users. This is planned for future series once some basic support is merged.

Bartosz Golaszewski (4):
nand: davinci: make davinci_nand_init() static
nand: davinci: add support for driver model
davinci: omapl138-lcdk: enable driver model for NAND
davinci: da850-evm: enable driver model for NAND

 arch/arm/dts/da850-evm-u-boot.dtsi            |  4 ++
 arch/arm/dts/da850-lcdk-u-boot.dtsi           |  4 ++
 arch/arm/include/asm/ti-common/davinci_nand.h |  2 -
 configs/da850evm_defconfig                    |  1 +
 configs/da850evm_direct_nor_defconfig         |  1 +
 configs/da850evm_nand_defconfig               |  1 +
 configs/omapl138_lcdk_defconfig               |  1 +
 drivers/mtd/nand/raw/davinci_nand.c           | 48 ++++++++++++++++++-
 include/configs/da850evm.h                    |  4 ++
 include/configs/omapl138_lcdk.h               |  4 ++
 10 files changed, 66 insertions(+), 4 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH 1/4 nand: davinci: make davinci_nand_init() static

From: Bartosz Golaszewski <[email protected]>

This function is only used within the driver itself. No need to export it.

---
 arch/arm/include/asm/ti-common/davinci_nand.h | 2 --
 drivers/mtd/nand/raw/davinci_nand.c           | 2 +-
 2 files changed, 1 insertion(+), 3 deletions(-)
arch/arm/include/asm/ti-common/davinci_nand.h +0 -2
index e26381c7fd..28842c3b15 100644
@@ -95,6 +95,4 @@ struct davinci_emif_regs {
 #define DAVINCI_ABCR_ASIZE_16BIT			1
 #define DAVINCI_ABCR_ASIZE_8BIT				0
 
-void davinci_nand_init(struct nand_chip *nand);
-
 #endif
drivers/mtd/nand/raw/davinci_nand.c +1 -1
index cfa9b535c8..e1c4498cb9 100644
@@ -730,7 +730,7 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
 	return __raw_readl(&davinci_emif_regs->nandfsr) & 0x1;
 }
 
-void davinci_nand_init(struct nand_chip *nand)
+static void davinci_nand_init(struct nand_chip *nand)
 {
 #if defined CONFIG_KEYSTONE_RBL_NAND
 	int i;
Signature · 1 line
2.21.0
#2 lore raw

PATCH 2/4 nand: davinci: add support for driver model

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Extend the davinci NAND driver to support the driver model. For now this doesn't add any device-tree parsing due to the fact that we can't access the actual nand node on the device-tree - it's a subnode of the aemif device and we don't have an aemif driver on davinci at the moment.

---
 drivers/mtd/nand/raw/davinci_nand.c | 46 ++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)
drivers/mtd/nand/raw/davinci_nand.c +45 -1
index e1c4498cb9..33c2f16be8 100644
@@ -31,6 +31,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <nand.h>
+#include <dm/uclass.h>
 #include <asm/ti-common/davinci_nand.h>
 
 /* Definitions for 4-bit hardware ECC */
@@ -785,10 +786,53 @@ static void davinci_nand_init(struct nand_chip *nand)
 	nand->dev_ready = nand_davinci_dev_ready;
 }
 
-int board_nand_init(struct nand_chip *chip) __attribute__((weak));
+#ifdef CONFIG_SYS_NAND_SELF_INIT
+static int davinci_nand_probe(struct udevice *dev)
+{
+	struct nand_chip *nand = dev_get_priv(dev);
+	struct mtd_info *mtd = nand_to_mtd(nand);
+	int ret;
+
+	nand->IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
+	nand->IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE;
+
+	davinci_nand_init(nand);
+
+	ret = nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS);
+	if (ret)
+		return ret;
+
+	return nand_register(0, mtd);
+}
+
+static const struct udevice_id davinci_nand_ids[] = {
+	{ .compatible = "ti,davinci-nand" },
+	{ }
+};
+
+U_BOOT_DRIVER(davinci_nand) = {
+	.name		= "davinci-nand",
+	.id		= UCLASS_MTD,
+	.of_match	= davinci_nand_ids,
+	.probe		= davinci_nand_probe,
+	.priv_auto_alloc_size = sizeof(struct nand_chip),
+};
+
+void board_nand_init(void)
+{
+	struct udevice *dev;
+	int ret;
 
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+					  DM_GET_DRIVER(davinci_nand), &dev);
+	if (ret && ret != -ENODEV)
+		pr_err("Failed to initialize %s: %d\n", dev->name, ret);
+}
+#else
+int board_nand_init(struct nand_chip *chip) __attribute__((weak));
 int board_nand_init(struct nand_chip *chip)
 {
 	davinci_nand_init(chip);
 	return 0;
 }
+#endif /* CONFIG_SYS_NAND_SELF_INIT */
Signature · 1 line
2.21.0
#3 lore raw

PATCH 3/4 davinci: omapl138-lcdk: enable driver model for NAND

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device.

On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently.

---
 arch/arm/dts/da850-lcdk-u-boot.dtsi | 4 ++++
 configs/omapl138_lcdk_defconfig     | 1 +
 include/configs/omapl138_lcdk.h     | 4 ++++
 3 files changed, 9 insertions(+)
arch/arm/dts/da850-lcdk-u-boot.dtsi +4 -0
index 80dda8ef58..541f4ca200 100644
@@ -9,4 +9,8 @@
 	aliases {
 		i2c0 = &i2c0;
 	};
+
+	nand {
+		compatible = "ti,davinci-nand";
+	};
 };
configs/omapl138_lcdk_defconfig +1 -0
index 48f251ebb8..94609f9a34 100644
@@ -39,6 +39,7 @@ CONFIG_DM_I2C=y
 CONFIG_DM_I2C_COMPAT=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
include/configs/omapl138_lcdk.h +4 -0
index da615e5063..a4dc060634 100644
@@ -176,6 +176,10 @@
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
 #endif
 
 #ifdef CONFIG_SYS_USE_NOR
Signature · 1 line
2.21.0
#4 lore raw

PATCH 4/4 davinci: da850-evm: enable driver model for NAND

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device.

On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently.

---
 arch/arm/dts/da850-evm-u-boot.dtsi    | 4 ++++
 configs/da850evm_defconfig            | 1 +
 configs/da850evm_direct_nor_defconfig | 1 +
 configs/da850evm_nand_defconfig       | 1 +
 include/configs/da850evm.h            | 4 ++++
 5 files changed, 11 insertions(+)
arch/arm/dts/da850-evm-u-boot.dtsi +4 -0
index 1683f3472e..d9e8b9926a 100644
@@ -10,6 +10,10 @@
 	soc at 1c00000 {
 		u-boot,dm-spl;
 	};
+
+	nand {
+		compatible = "ti,davinci-nand";
+	};
 };
 
 &flash {
configs/da850evm_defconfig +1 -0
index c095058282..8a891eb8aa 100644
@@ -52,6 +52,7 @@ CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_MTD_DEVICE=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
configs/da850evm_direct_nor_defconfig +1 -0
index 166e77b8e3..85c96f9951 100644
@@ -42,6 +42,7 @@ CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 # CONFIG_MMC is not set
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_PROTECTION=y
configs/da850evm_nand_defconfig +1 -0
index 7271016346..187087768f 100644
@@ -49,6 +49,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
include/configs/da850evm.h +4 -0
index ccdac0abec..b8556adbb1 100644
@@ -182,6 +182,10 @@
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
 #endif
 
 /*
Signature · 1 line
2.21.0
#5 lore raw

PATCH 4/4 davinci: da850-evm: enable driver model for NAND

Quoted 11 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device.

On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently.

For the whole series...

Quoted 77 lines
---
 arch/arm/dts/da850-evm-u-boot.dtsi    | 4 ++++
 configs/da850evm_defconfig            | 1 +
 configs/da850evm_direct_nor_defconfig | 1 +
 configs/da850evm_nand_defconfig       | 1 +
 include/configs/da850evm.h            | 4 ++++
 5 files changed, 11 insertions(+)
arch/arm/dts/da850-evm-u-boot.dtsi +4 -0
index 1683f3472e..d9e8b9926a 100644
@@ -10,6 +10,10 @@
        soc at 1c00000 {
                u-boot,dm-spl;
        };
+
+       nand {
+               compatible = "ti,davinci-nand";
+       };
 };
 
 &flash {
configs/da850evm_defconfig +1 -0
index c095058282..8a891eb8aa 100644
@@ -52,6 +52,7 @@ CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_MTD_DEVICE=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
configs/da850evm_direct_nor_defconfig +1 -0
index 166e77b8e3..85c96f9951 100644
@@ -42,6 +42,7 @@ CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 # CONFIG_MMC is not set
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_PROTECTION=y
configs/da850evm_nand_defconfig +1 -0
index 7271016346..187087768f 100644
@@ -49,6 +49,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
include/configs/da850evm.h +4 -1
index ccdac0abec..b8556adbb1 100644
@@ -182,6 +182,10 @@
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
 #endif
 
 /*
--

2.21.0

#6 lore raw

cover nand: davinci: enable driver model for NAND

In reply to Bartosz Golaszewski
Quoted 15 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

This series enables the driver model for NAND on davinci da850 boards.

The first patch is a simple tweak for an unnecessarily exported function.

The second patch extends the NAND driver to support both legacy and driver-model users. For now we don't parse the device-tree as it's a bit complicated on da850, namely: the nand node is a child of the aemif node for which we don't have a driver in u-boot (unlike on linux where the aemif driver populates all its subnodes). In order for the nand device to be probed, we're adding a dummy node to the u-boot dts extensions with an appropriate compatible.

Quoted 6 lines

Two last patches enable driver model for NAND on da850-lcdk and da850-evm. We don't enable the driver model in SPL as first: the patches enabling CONFIG_SPL_DM are still waiting to be merged, and second: the nand_spl_simple driver used by davinci SPL doesn't support driver model users. This is planned for future series once some basic support is merged.

What happens when the board is booting SPL from NAND? Will it still work as expected? I know the da850-evm has at least one configuration which this is intended to boot from NAND instead of the default SPI flash.

adam

Quoted 22 lines

Bartosz Golaszewski (4):
nand: davinci: make davinci_nand_init() static
nand: davinci: add support for driver model
davinci: omapl138-lcdk: enable driver model for NAND
davinci: da850-evm: enable driver model for NAND

 arch/arm/dts/da850-evm-u-boot.dtsi            |  4 ++
 arch/arm/dts/da850-lcdk-u-boot.dtsi           |  4 ++
 arch/arm/include/asm/ti-common/davinci_nand.h |  2 -
 configs/da850evm_defconfig                    |  1 +
 configs/da850evm_direct_nor_defconfig         |  1 +
 configs/da850evm_nand_defconfig               |  1 +
 configs/omapl138_lcdk_defconfig               |  1 +
 drivers/mtd/nand/raw/davinci_nand.c           | 48 ++++++++++++++++++-
 include/configs/da850evm.h                    |  4 ++
 include/configs/omapl138_lcdk.h               |  4 ++
 10 files changed, 66 insertions(+), 4 deletions(-)

--
2.21.0

#7 lore raw

cover nand: davinci: enable driver model for NAND

czw., 6 cze 2019 o 17:58 Adam Ford <[email protected]> napisaÅ‚(a):

Quoted 24 lines · Bartosz Golaszewski
Quoted 15 lines

From: Bartosz Golaszewski <[email protected]>

This series enables the driver model for NAND on davinci da850 boards.

The first patch is a simple tweak for an unnecessarily exported function.

The second patch extends the NAND driver to support both legacy and driver-model users. For now we don't parse the device-tree as it's a bit complicated on da850, namely: the nand node is a child of the aemif node for which we don't have a driver in u-boot (unlike on linux where the aemif driver populates all its subnodes). In order for the nand device to be probed, we're adding a dummy node to the u-boot dts extensions with an appropriate compatible.

Quoted 6 lines

Two last patches enable driver model for NAND on da850-lcdk and da850-evm. We don't enable the driver model in SPL as first: the patches enabling CONFIG_SPL_DM are still waiting to be merged, and second: the nand_spl_simple driver used by davinci SPL doesn't support driver model users. This is planned for future series once some basic support is merged.

Quoted 5 lines

What happens when the board is booting SPL from NAND? Will it still work as expected? I know the da850-evm has at least one configuration which this is intended to boot from NAND instead of the default SPI flash.

The driver works just like before in SPL. The support for the driver model is added incrementally. In fact I tested it on da850-lcdk with SPL loading u-boot from NAND.

On da850-evm we could probably enable driver-model in SPL as well for NAND, but I prefer to do it at once for both boards.

Bart

Quoted 24 lines

adam

Quoted 22 lines

Bartosz Golaszewski (4):
nand: davinci: make davinci_nand_init() static
nand: davinci: add support for driver model
davinci: omapl138-lcdk: enable driver model for NAND
davinci: da850-evm: enable driver model for NAND

 arch/arm/dts/da850-evm-u-boot.dtsi            |  4 ++
 arch/arm/dts/da850-lcdk-u-boot.dtsi           |  4 ++
 arch/arm/include/asm/ti-common/davinci_nand.h |  2 -
 configs/da850evm_defconfig                    |  1 +
 configs/da850evm_direct_nor_defconfig         |  1 +
 configs/da850evm_nand_defconfig               |  1 +
 configs/omapl138_lcdk_defconfig               |  1 +
 drivers/mtd/nand/raw/davinci_nand.c           | 48 ++++++++++++++++++-
 include/configs/da850evm.h                    |  4 ++
 include/configs/omapl138_lcdk.h               |  4 ++
 10 files changed, 66 insertions(+), 4 deletions(-)

--
2.21.0

#8 lore raw

cover nand: davinci: enable driver model for NAND

pt., 7 cze 2019 o 10:16 Bartosz Golaszewski <[email protected]> napisał(a):

Quoted 32 lines

czw., 6 cze 2019 o 17:58 Adam Ford <[email protected]> napisał(a):

Quoted 24 lines · Bartosz Golaszewski
Quoted 15 lines

From: Bartosz Golaszewski <[email protected]>

This series enables the driver model for NAND on davinci da850 boards.

The first patch is a simple tweak for an unnecessarily exported function.

The second patch extends the NAND driver to support both legacy and driver-model users. For now we don't parse the device-tree as it's a bit complicated on da850, namely: the nand node is a child of the aemif node for which we don't have a driver in u-boot (unlike on linux where the aemif driver populates all its subnodes). In order for the nand device to be probed, we're adding a dummy node to the u-boot dts extensions with an appropriate compatible.

Quoted 6 lines

Two last patches enable driver model for NAND on da850-lcdk and da850-evm. We don't enable the driver model in SPL as first: the patches enabling CONFIG_SPL_DM are still waiting to be merged, and second: the nand_spl_simple driver used by davinci SPL doesn't support driver model users. This is planned for future series once some basic support is merged.

Quoted 5 lines

What happens when the board is booting SPL from NAND? Will it still work as expected? I know the da850-evm has at least one configuration which this is intended to boot from NAND instead of the default SPI flash.

Quoted 33 lines

The driver works just like before in SPL. The support for the driver model is added incrementally. In fact I tested it on da850-lcdk with SPL loading u-boot from NAND.

On da850-evm we could probably enable driver-model in SPL as well for NAND, but I prefer to do it at once for both boards.

Bart

Quoted 24 lines

adam

Quoted 22 lines

Bartosz Golaszewski (4):
nand: davinci: make davinci_nand_init() static
nand: davinci: add support for driver model
davinci: omapl138-lcdk: enable driver model for NAND
davinci: da850-evm: enable driver model for NAND

 arch/arm/dts/da850-evm-u-boot.dtsi            |  4 ++
 arch/arm/dts/da850-lcdk-u-boot.dtsi           |  4 ++
 arch/arm/include/asm/ti-common/davinci_nand.h |  2 -
 configs/da850evm_defconfig                    |  1 +
 configs/da850evm_direct_nor_defconfig         |  1 +
 configs/da850evm_nand_defconfig               |  1 +
 configs/omapl138_lcdk_defconfig               |  1 +
 drivers/mtd/nand/raw/davinci_nand.c           | 48 ++++++++++++++++++-
 include/configs/da850evm.h                    |  4 ++
 include/configs/omapl138_lcdk.h               |  4 ++
 10 files changed, 66 insertions(+), 4 deletions(-)

--
2.21.0

Hi Tom,

can you pick up this series?

Bart

#9 lore raw

cover nand: davinci: enable driver model for NAND

Quoted 63 lines · Bartosz Golaszewski

pt., 7 cze 2019 o 10:16 Bartosz Golaszewski <[email protected]> napisał(a):

Quoted 62 lines

czw., 6 cze 2019 o 17:58 Adam Ford <[email protected]> napisał(a):

Quoted 24 lines · Bartosz Golaszewski
Quoted 15 lines

From: Bartosz Golaszewski <[email protected]>

This series enables the driver model for NAND on davinci da850 boards.

The first patch is a simple tweak for an unnecessarily exported function.

The second patch extends the NAND driver to support both legacy and driver-model users. For now we don't parse the device-tree as it's a bit complicated on da850, namely: the nand node is a child of the aemif node for which we don't have a driver in u-boot (unlike on linux where the aemif driver populates all its subnodes). In order for the nand device to be probed, we're adding a dummy node to the u-boot dts extensions with an appropriate compatible.

Quoted 6 lines

Two last patches enable driver model for NAND on da850-lcdk and da850-evm. We don't enable the driver model in SPL as first: the patches enabling CONFIG_SPL_DM are still waiting to be merged, and second: the nand_spl_simple driver used by davinci SPL doesn't support driver model users. This is planned for future series once some basic support is merged.

Quoted 5 lines

What happens when the board is booting SPL from NAND? Will it still work as expected? I know the da850-evm has at least one configuration which this is intended to boot from NAND instead of the default SPI flash.

The driver works just like before in SPL. The support for the driver model is added incrementally. In fact I tested it on da850-lcdk with SPL loading u-boot from NAND.

On da850-evm we could probably enable driver-model in SPL as well for NAND, but I prefer to do it at once for both boards.

Bart

Quoted 21 lines

adam

Quoted 19 lines

Bartosz Golaszewski (4):
nand: davinci: make davinci_nand_init() static
nand: davinci: add support for driver model
davinci: omapl138-lcdk: enable driver model for NAND
davinci: da850-evm: enable driver model for NAND

 arch/arm/dts/da850-evm-u-boot.dtsi            |  4 ++
 arch/arm/dts/da850-lcdk-u-boot.dtsi           |  4 ++
 arch/arm/include/asm/ti-common/davinci_nand.h |  2 -
 configs/da850evm_defconfig                    |  1 +
 configs/da850evm_direct_nor_defconfig         |  1 +
 configs/da850evm_nand_defconfig               |  1 +
 configs/omapl138_lcdk_defconfig               |  1 +
 drivers/mtd/nand/raw/davinci_nand.c           | 48 ++++++++++++++++++-
 include/configs/da850evm.h                    |  4 ++
 include/configs/omapl138_lcdk.h               |  4 ++
 10 files changed, 66 insertions(+), 4 deletions(-)
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

--
2.21.0

Hi Tom,

can you pick up this series?

Post-release, yes, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190703/440bc541/attachment.sig>