Skip to contentSkip to conversation

PCI: tegra: Fix support for GPIO based PERST#

PATCH In review Jon Hunter 3 participants 3 messages Jul 5, 2019

Subsystems (4)
lore
Share & tools
lore

Jon Hunter

author maintainer
#0 lore raw

PATCH 1/1 PCI: tegra: Fix support for GPIO based PERST#

Commit 5e5e9c23f82a ("PCI: tegra: Add support for GPIO based PERST#") calls the function devm_gpiod_get_from_of_node() to request a GPIO. Unfortunately, around the same time this was merged, commit 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") was also merged to fix the return value of the function devm_gpiod_get_from_of_node() that was incorrectly returning NULL instead of an error pointer encoded with -ENOENT if no GPIO was found. When this fix for the GPIO subsystem was merged, PCI support for Tegra devices that did not provide a GPIO for the PERST# (which is optional) broke because the Tegra PCI driver was expecting NULL to be returned if no GPIO was present and not -ENOENT.

Fix this by checking to see if -ENOENT is returned from the function devm_gpiod_get_from_of_node(), to indicate there is no GPIO for PERST# present, and if this is the case set the variable 'reset_gpio' to NULL. If the variable 'reset_gpio' is NULL then the Tegra PCI driver will fallback to using the AFI register to toggle the PERST#. Finally, correct the comment now that NULL is no longer returned from devm_gpiod_get_from_of_node().

Fixes 5e5e9c23f82a ("PCI: tegra: Add support for GPIO based PERST#")
---
 drivers/pci/controller/pci-tegra.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/pci/controller/pci-tegra.c +10 -6
index 9cc03a2549c0..ff8a346f3e04 100644
@@ -2295,18 +2295,22 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		}
 
 		/*
-		 * Returns null if reset-gpios property is not populated and
-		 * fall back to using AFI per port register to toggle PERST#
-		 * SFIO line.
+		 * Returns -ENOENT if reset-gpios property is not populated
+		 * and in this case fall back to using AFI per port register
+		 * to toggle PERST# SFIO line.
 		 */
 		rp->reset_gpio = devm_gpiod_get_from_of_node(dev, port,
 							     "reset-gpios", 0,
 							     GPIOD_OUT_LOW,
 							     label);
 		if (IS_ERR(rp->reset_gpio)) {
-			err = PTR_ERR(rp->reset_gpio);
-			dev_err(dev, "failed to get reset GPIO: %d\n", err);
-			return err;
+			if (PTR_ERR(rp->reset_gpio) == -ENOENT) {
+				rp->reset_gpio = NULL;
+			} else {
+				dev_err(dev, "failed to get reset GPIO: %d\n",
+					err);
+				return PTR_ERR(rp->reset_gpio);
+			}
 		}
 
 		list_add_tail(&rp->list, &pcie->ports);
Signature · 1 line
2.17.1
#1 lore raw
Quoted 20 lines · Jon Hunter

Commit 5e5e9c23f82a ("PCI: tegra: Add support for GPIO based PERST#") calls the function devm_gpiod_get_from_of_node() to request a GPIO. Unfortunately, around the same time this was merged, commit 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") was also merged to fix the return value of the function devm_gpiod_get_from_of_node() that was incorrectly returning NULL instead of an error pointer encoded with -ENOENT if no GPIO was found. When this fix for the GPIO subsystem was merged, PCI support for Tegra devices that did not provide a GPIO for the PERST# (which is optional) broke because the Tegra PCI driver was expecting NULL to be returned if no GPIO was present and not -ENOENT.

Fix this by checking to see if -ENOENT is returned from the function devm_gpiod_get_from_of_node(), to indicate there is no GPIO for PERST# present, and if this is the case set the variable 'reset_gpio' to NULL. If the variable 'reset_gpio' is NULL then the Tegra PCI driver will fallback to using the AFI register to toggle the PERST#. Finally, correct the comment now that NULL is no longer returned from devm_gpiod_get_from_of_node().

Quoted 5 lines
Fixes 5e5e9c23f82a ("PCI: tegra: Add support for GPIO based PERST#")
---
 drivers/pci/controller/pci-tegra.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

Can I squash this in the original commit (ie Fixes: tag above) ? I do not think there is any issue with that, if there is please do let me know.

Thanks,
Lorenzo

Quoted 36 lines
drivers/pci/controller/pci-tegra.c +10 -6
index 9cc03a2549c0..ff8a346f3e04 100644
@@ -2295,18 +2295,22 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		}
 
 		/*
-		 * Returns null if reset-gpios property is not populated and
-		 * fall back to using AFI per port register to toggle PERST#
-		 * SFIO line.
+		 * Returns -ENOENT if reset-gpios property is not populated
+		 * and in this case fall back to using AFI per port register
+		 * to toggle PERST# SFIO line.
 		 */
 		rp->reset_gpio = devm_gpiod_get_from_of_node(dev, port,
 							     "reset-gpios", 0,
 							     GPIOD_OUT_LOW,
 							     label);
 		if (IS_ERR(rp->reset_gpio)) {
-			err = PTR_ERR(rp->reset_gpio);
-			dev_err(dev, "failed to get reset GPIO: %d\n", err);
-			return err;
+			if (PTR_ERR(rp->reset_gpio) == -ENOENT) {
+				rp->reset_gpio = NULL;
+			} else {
+				dev_err(dev, "failed to get reset GPIO: %d\n",
+					err);
+				return PTR_ERR(rp->reset_gpio);
+			}
 		}
 
 		list_add_tail(&rp->list, &pcie->ports);
Signature · 1 line
2.17.1
#2 lore raw
Quoted 26 lines · Lorenzo Pieralisi
Quoted 20 lines · Jon Hunter

Commit 5e5e9c23f82a ("PCI: tegra: Add support for GPIO based PERST#") calls the function devm_gpiod_get_from_of_node() to request a GPIO. Unfortunately, around the same time this was merged, commit 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") was also merged to fix the return value of the function devm_gpiod_get_from_of_node() that was incorrectly returning NULL instead of an error pointer encoded with -ENOENT if no GPIO was found. When this fix for the GPIO subsystem was merged, PCI support for Tegra devices that did not provide a GPIO for the PERST# (which is optional) broke because the Tegra PCI driver was expecting NULL to be returned if no GPIO was present and not -ENOENT.

Fix this by checking to see if -ENOENT is returned from the function devm_gpiod_get_from_of_node(), to indicate there is no GPIO for PERST# present, and if this is the case set the variable 'reset_gpio' to NULL. If the variable 'reset_gpio' is NULL then the Tegra PCI driver will fallback to using the AFI register to toggle the PERST#. Finally, correct the comment now that NULL is no longer returned from devm_gpiod_get_from_of_node().

Quoted 5 lines
Fixes 5e5e9c23f82a ("PCI: tegra: Add support for GPIO based PERST#")
---
 drivers/pci/controller/pci-tegra.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
Quoted 6 lines

Can I squash this in the original commit (ie Fixes: tag above) ? I do not think there is any issue with that, if there is please do let me know.

Thanks,
Lorenzo

Reviewed-by Manikanta Maddireddy

Thank you Jon for publishing the fix.

Hi Lorenzo,

Yes, this patch can be squashed in the original commit.

Apologies for the inconvenience.

Manikanta

Quoted 36 lines
Quoted 36 lines
drivers/pci/controller/pci-tegra.c +10 -6
index 9cc03a2549c0..ff8a346f3e04 100644
@@ -2295,18 +2295,22 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		}
 
 		/*
-		 * Returns null if reset-gpios property is not populated and
-		 * fall back to using AFI per port register to toggle PERST#
-		 * SFIO line.
+		 * Returns -ENOENT if reset-gpios property is not populated
+		 * and in this case fall back to using AFI per port register
+		 * to toggle PERST# SFIO line.
 		 */
 		rp->reset_gpio = devm_gpiod_get_from_of_node(dev, port,
 							     "reset-gpios", 0,
 							     GPIOD_OUT_LOW,
 							     label);
 		if (IS_ERR(rp->reset_gpio)) {
-			err = PTR_ERR(rp->reset_gpio);
-			dev_err(dev, "failed to get reset GPIO: %d\n", err);
-			return err;
+			if (PTR_ERR(rp->reset_gpio) == -ENOENT) {
+				rp->reset_gpio = NULL;
+			} else {
+				dev_err(dev, "failed to get reset GPIO: %d\n",
+					err);
+				return PTR_ERR(rp->reset_gpio);
+			}
 		}
 
 		list_add_tail(&rp->list, &pcie->ports);
Signature · 1 line
2.17.1