Skip to contentSkip to conversation

arm64: dts: realtek: Add realtek intc to RTD129x

PATCH In review Aleix Roca Nonell 1 participant 1 message Jul 7, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 4/6 arm64: dts: realtek: Add realtek intc to RTD129x

Add realtek's interrupt controller node and interrupt lines to UART0

---
 arch/arm64/boot/dts/realtek/rtd129x.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/realtek/rtd129x.dtsi +10 -0
index 9009db909fab..6f61b9858aa0 100644
@@ -29,8 +29,18 @@
 		/* Exclude up to 2 GiB of RAM */
 		ranges = <0x80000000 0x80000000 0x80000000>;
 
+		mux1_intc: intc@98007000 {
+			compatible = "realtek,rtd129x-intc-iso";
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			reg = <0x98007000 0x4 0x98007040 0x4 0x98007004 0x4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		uart0: serial@98007800 {
 			compatible = "snps,dw-apb-uart";
+			interrupt-parent = <&mux1_intc>;
+			interrupts = <2>;
 			reg = <0x98007800 0x400>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
Signature · 1 line
2.21.0