arm64: dts: realtek: Add bpi-w2 board support and its RTD1296 SoC
Subsystems (2)
PATCH 6/6 arm64: dts: realtek: Add bpi-w2 board support and its RTD1296 SoC
Add basic device tree description for the Bannana Pi W2 (bpi-w2) and its SoC. The board should be able to boot up to a ram based rootfs.
The only information available on the memreserve areas are the macro names holing the addresses in the original source code:
- 0x00000000 0x00100000 - apparently used to fix an undefined bug
- 0x02600000 0x00c00000 - ION_AUDIO_HEAP
- 0x03200000 0x0b800000 - ION_MEDIA_HEAP 1
- 0x10000000 0x00014000 - ACPU_IDMEM
- 0x14200000 0x09200000 - ION_MEDIA_HEAP 2
The CPUs still lack the enable-method property "rtk-spin-table" as previously noted in [1].
[1] - commit 72a7786c0a0d65 ("ARM64: dts: Add Realtek RTD1295 and Zidoo X9S")
--- arch/arm64/boot/dts/realtek/Makefile | 1 + .../dts/realtek/rtd1296-bananapi-bpi-w2.dts | 27 +++++++ arch/arm64/boot/dts/realtek/rtd1296.dtsi | 77 +++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 arch/arm64/boot/dts/realtek/rtd1296-bananapi-bpi-w2.dts create mode 100644 arch/arm64/boot/dts/realtek/rtd1296.dtsi
arch/arm64/boot/dts/realtek/Makefile +1 -0
@@ -2,3 +2,4 @@ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb +dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-bananapi-bpi-w2.dtb
arch/arm64/boot/dts/realtek/rtd1296-bananapi-bpi-w2.dts new file +27 -0
@@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "rtd1296.dtsi" + +/ { + model = "Banana Pi BPI-W2"; + compatible = "bananapi,bpi-w2", "realtek,rtd1296"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0x98007800"; + }; + + aliases { + serial0 = &uart0; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0x80000000>; /* 2048 MB */ + }; +}; + +&uart0 { + status = "okay"; +};
arch/arm64/boot/dts/realtek/rtd1296.dtsi new file +77 -0
77 lines not on this page · raw message
Signature · 1 line
2.21.0