Skip to contentSkip to conversation

clk: imx8mq: set correct parent for usb ctrl clocks

PATCH Applied [email protected] 3 participants 4 messages Jul 10, 2019 – Jul 23, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 clk: imx8mq: set correct parent for usb ctrl clocks

From: Li Jun <[email protected]>

Per latest imx8mq datasheet of CCM, the parent of usb1_ctrl_root_clk and usb2_ctrl_root_clk is usb_bus.

---
 drivers/clk/imx/clk-imx8mq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/imx/clk-imx8mq.c +2 -2
index d407a07..c7d1546 100644
@@ -523,8 +523,8 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_CLK_UART2_ROOT] = imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
 	clks[IMX8MQ_CLK_UART3_ROOT] = imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
 	clks[IMX8MQ_CLK_UART4_ROOT] = imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
-	clks[IMX8MQ_CLK_USB1_CTRL_ROOT] = imx_clk_gate4("usb1_ctrl_root_clk", "usb_core_ref", base + 0x44d0, 0);
-	clks[IMX8MQ_CLK_USB2_CTRL_ROOT] = imx_clk_gate4("usb2_ctrl_root_clk", "usb_core_ref", base + 0x44e0, 0);
+	clks[IMX8MQ_CLK_USB1_CTRL_ROOT] = imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0);
+	clks[IMX8MQ_CLK_USB2_CTRL_ROOT] = imx_clk_gate4("usb2_ctrl_root_clk", "usb_bus", base + 0x44e0, 0);
 	clks[IMX8MQ_CLK_USB1_PHY_ROOT] = imx_clk_gate4("usb1_phy_root_clk", "usb_phy_ref", base + 0x44f0, 0);
 	clks[IMX8MQ_CLK_USB2_PHY_ROOT] = imx_clk_gate4("usb2_phy_root_clk", "usb_phy_ref", base + 0x4500, 0);
 	clks[IMX8MQ_CLK_USDHC1_ROOT] = imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
Signature · 1 line
2.7.4
#1 lore raw

PATCH 2/2 arm64: dts: imx8mq: correct usb controller clocks

From: Li Jun <[email protected]>

The correct clock for "bus_early", "ref", "suspend" should be:
IMX8MQ_CLK_USB1_CTRL_ROOT, IMX8MQ_CLK_USB_CORE_REF, IMX8MQ_CLK_32K, especially we may need the right suspend clock rate to set register in controller driver.

---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/freescale/imx8mq.dtsi +4 -4
index d09b808..a43ddac 100644
@@ -901,9 +901,9 @@
 		usb_dwc3_0: usb@38100000 {
 			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
 			reg = <0x38100000 0x10000>;
-			clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
 			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
-			         <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>;
+				 <&clk IMX8MQ_CLK_32K>;
 			clock-names = "bus_early", "ref", "suspend";
 			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
 			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
@@ -933,9 +933,9 @@
 		usb_dwc3_1: usb@38200000 {
 			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
 			reg = <0x38200000 0x10000>;
-			clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
 			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
-			         <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>;
+				 <&clk IMX8MQ_CLK_32K>;
 			clock-names = "bus_early", "ref", "suspend";
 			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
 			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
Signature · 1 line
2.7.4
Reviewed-by on v1 1/2
#2 lore raw
In reply to [email protected]
Quoted 6 lines · On 19-07-10 19:19:16, [email protected] wrote:

From: Li Jun <[email protected]>

Per latest imx8mq datasheet of CCM, the parent of usb1_ctrl_root_clk and usb2_ctrl_root_clk is usb_bus.

For the entire series.

Quoted 22 lines
---
 drivers/clk/imx/clk-imx8mq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/imx/clk-imx8mq.c +2 -2
index d407a07..c7d1546 100644
@@ -523,8 +523,8 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_CLK_UART2_ROOT] = imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
 	clks[IMX8MQ_CLK_UART3_ROOT] = imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
 	clks[IMX8MQ_CLK_UART4_ROOT] = imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
-	clks[IMX8MQ_CLK_USB1_CTRL_ROOT] = imx_clk_gate4("usb1_ctrl_root_clk", "usb_core_ref", base + 0x44d0, 0);
-	clks[IMX8MQ_CLK_USB2_CTRL_ROOT] = imx_clk_gate4("usb2_ctrl_root_clk", "usb_core_ref", base + 0x44e0, 0);
+	clks[IMX8MQ_CLK_USB1_CTRL_ROOT] = imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0);
+	clks[IMX8MQ_CLK_USB2_CTRL_ROOT] = imx_clk_gate4("usb2_ctrl_root_clk", "usb_bus", base + 0x44e0, 0);
 	clks[IMX8MQ_CLK_USB1_PHY_ROOT] = imx_clk_gate4("usb1_phy_root_clk", "usb_phy_ref", base + 0x44f0, 0);
 	clks[IMX8MQ_CLK_USB2_PHY_ROOT] = imx_clk_gate4("usb2_phy_root_clk", "usb_phy_ref", base + 0x4500, 0);
 	clks[IMX8MQ_CLK_USDHC1_ROOT] = imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
Signature · 1 line
2.7.4